Inverse Square Law in Spectrally Bounded Quantum Dynamics

The object of the paper is to formulate Quantum (Schrödinger) dynamics of spectrally bounded wavefunction. The Nyquist theorem is used to replace the wavefunction with a discrete series of numbers. Consequently, in this case, Schrödinger dynamics can be formalized as a universal set of ordinary differential Equations, with universal coupling between them, which are related to Euler’s formula. It is shown that the coefficient (m, n) is inversely proportional to the distance between the points n and m. As far as we know, this is the first time that this inverse square law was formulated.

Laminar natural convection characteristics in an enclosure with heated hexagonal block for non-Newtonian power law fluids

This work illustrates the steady state, two dimensional natural convective flow and heat transfer features in square enclosure containing heated hexagonal block maintained either at constant wall temperature(CWT) or uniform heat flux(UHF) thermal conditions. Governing equations(mass, momentum and energy) are solved by using finite volume method(FVM) with 3rd order accurate QUICK discretization scheme and SIMPLE algorithm for range of field pertinent parameters such as, Grashof number(10~3≤ Gr ≤ 10~6), Prandtl number(1 ≤ Pr ≤ 100) and power law index(0.5 ≤ n ≤ 1.5). The analysis of momentum and heat transfer characteristics are delineated by evolution of streamlines, isotherms, variation of average Nusselt number value and Colburn factor for natural convection(j_(nH)). A remarkable change is observed on fluid flow and thermal distribution pattern in cavity for both thermal conditions. Nusselt number shows linear variation with Grashof and Prandtl numbers; while rate of heat transfer by convection decreases for power law index value. Higher heat transfer rate can be achieved by using uniform heat flux condition. A Nusselt number correlation is developed for possible utilization in engineering/scientific design purpose.

Field-Strength Depression of Emitters Dispersed from a Point Source into a Cylindrical Volume

Dispersing emitters, whose emissions are consistent with the inverse square law, from a point into cylindrical shapes causes a field-strength depression which is strongly dependent upon the cylinder’s dimensions and the distance from the cylinder. The computations of field-strength depressions are partitioned into the components due to dispersion of the emitters alone, due to self-absorption alone, and the total field-strength depression. Each partition is displayed graphically for distances of 5 cm to 10 meters from the cylinders and for a variety of cylinder dimensions. The shape of the displayed curves is analyzed to reveal the basis for correlations between curve shape and the cylinder dimensions. Practical use of the data presented graphically is demonstrated.

A simple approach for the estimation of CO_2 penetration depth into a caprock layer

Caprock is a water-saturated formation with a sufficient entry capillary pressure to prevent the upward migration of a buoyant fluid. When the entry capillary pressure of caprock is smaller than the pressure exerted by the buoyant CO2plume, CO2gradually penetrates into the caprock. The CO2penetration depth into a caprock layer can be used to measure the caprock sealing efficiency and becomes the key issue to the assessment of caprock sealing efficiency. On the other hand, our numerical simulations on a caprock layer have revealed that a square root law for time and pore pressure exists for the CO2penetration into the caprock layer. Based on this finding, this study proposes a simple approach to estimate the CO2penetration depth into a caprock layer. This simple approach is initially developed to consider the speed of CO2invading front. It explicitly expresses the penetration depth with pressuring time, pressure difference and pressure magnitude. This simple approach is then used to fit three sets of experimental data and good fittings are observed regardless of pressures, strengths of porous media, and pore fluids(water,hydrochloric acid, and carbonic acid). Finally, theoretical analyses are conducted to explore those factors affecting CO2penetration depth. The effects of capillary pressure, gas sorption induced swelling, and fluid property are then included in this simple approach. These results show that this simple approach can predict the penetration depth into a caprock layer with sufficient accuracy, even if complicated interactions in penetration process are not explicitly expressed in this simple formula.