Generation of multi-wavelength square pulses in the dissipative soliton resonance regime by a Yb-doped fiber laser

Multi-wavelength square pulses are generated in the dissipative soliton resonance(DSR) regime by a Yb-doped fiber laser(YDFL) with a long cavity configuration. The spectral filter effect provided by a passive fiber with low-stress birefringence facilitates the establishment of multi-wavelength operation. Through appropriate control of the cavity parameters,a multi-wavelength DSR pulse can be generated in single-and dual-waveband regions. When the multi-wavelength DSR works in the 1038 nm waveband, the pulse duration can broaden from 2 ns to 37.7 ns. The maximum intra-cavity pulse energy is 152.7 nJ. When the DSR works in the 1038 nm and 1080 nm wavebands, the pulse duration can be tuned from2.3 ns to 10.5 ns with rising pump power. The emergence of the 1080 nm waveband is attributed to the stimulated Raman scattering(SRS) effect. Our work might help a deeper insight to be gained into DSR pulses in all-normal-dispersion YDFLs.

Deposition of cerium contained conversion films on LC4 alloy with square wave pulse method

Cerium contained conversion films were deposited on LC4 aluminum alloy usingsquare wave pulse (SWP) in a CeCl_3 solution with KMnO_4 as the oxidant. Energy dispersivespectroscopy (EDS) and scanning electron microscopy (SEM) were adopted to study the composition andthe morphology of the film. It is found that the film is composed of Al, Zn, Cu, and small amount ofcerium. The polarization curves of the specimens treated with SWP technique measured in 3.5% (massfraction) NaCl solution reveal that the film thus formed inhibits both the anodic and cathodicprocess of the corrosion of the specimen. The immersion tests of treated specimens in 3.5% NaClsolution indicate that the corrosion resistance of the SWP treated specimen is better than that ofthe untreated and is equivalent to or even better than that of the traditionally electro-chemicallytreated specimens.

Electrotransformation of Thermotoga maritima MS8

[Objective] The aim was to study on the electrotransformation of Thermotoga maritima MS8.[Method] Square waves,exponential waves and high voltage shock were used for the electrotransformation of T.maritima MS8,and the obtained transformants were detected by PCR.[Result] A single square electric pulse could be applied to cell sample in 0.2 cm ET cuvettes by using a Bio-Rad Gene Pulser set at 150 V,25 ms at room temperature,but the transformation efficiency was very low.[Conclusion] This research may improve the transformation efficiency of T.maritima MS8.