The reverse transformation has never occurred in a quenched and aged specimen upon heating from room temperature to 320℃ at which the martensite disappears thoroughly.Both B2 9R and DO_318R coexist in step-quenched a...The reverse transformation has never occurred in a quenched and aged specimen upon heating from room temperature to 320℃ at which the martensite disappears thoroughly.Both B2 9R and DO_318R coexist in step-quenched and short-time isothermally treated specimen. As prolonging the isothermal holding,the B29R disappears and DO_318R intensifies. B29R occurs only in specimen quenched and up-quenched immediately to 100—150℃. Rapid quenching from high temperatures will depress the B2→DO_3 ordering but not the A2 →B2 one.A plenty enough concentration of vacancy is a necessary condition of occurrence of B2→DO_3 ordering.The possible mechanism for the stabilization of martensite in a Cu-Zn-Al alloy was also discussed.展开更多
Stress induced deformation in A p～ M p and concomitant shape recovery behavior of Cu 13.4Al 4.0Ni single crystals were studied. Abnormal high stress induced deformation exists in A p～ M p under the conditions of eit...Stress induced deformation in A p～ M p and concomitant shape recovery behavior of Cu 13.4Al 4.0Ni single crystals were studied. Abnormal high stress induced deformation exists in A p～ M p under the conditions of either heating with load or cooling with load. The recovered deformation is successively composed of four parts, the recoveries from superelasticity, normal reverse transformation, thermally activated reverse transformation of partially stabilized martensite and reverse transformation of stabilized martensite by over heating. With increasing cycling number, the recovery part from normal reverse transformation decreases, while that from reverse transformation of stabilized martensite by over heating increases, which shows a typical stabilization of martensite.展开更多
文摘The reverse transformation has never occurred in a quenched and aged specimen upon heating from room temperature to 320℃ at which the martensite disappears thoroughly.Both B2 9R and DO_318R coexist in step-quenched and short-time isothermally treated specimen. As prolonging the isothermal holding,the B29R disappears and DO_318R intensifies. B29R occurs only in specimen quenched and up-quenched immediately to 100—150℃. Rapid quenching from high temperatures will depress the B2→DO_3 ordering but not the A2 →B2 one.A plenty enough concentration of vacancy is a necessary condition of occurrence of B2→DO_3 ordering.The possible mechanism for the stabilization of martensite in a Cu-Zn-Al alloy was also discussed.
文摘Stress induced deformation in A p～ M p and concomitant shape recovery behavior of Cu 13.4Al 4.0Ni single crystals were studied. Abnormal high stress induced deformation exists in A p～ M p under the conditions of either heating with load or cooling with load. The recovered deformation is successively composed of four parts, the recoveries from superelasticity, normal reverse transformation, thermally activated reverse transformation of partially stabilized martensite and reverse transformation of stabilized martensite by over heating. With increasing cycling number, the recovery part from normal reverse transformation decreases, while that from reverse transformation of stabilized martensite by over heating increases, which shows a typical stabilization of martensite.
