High-k gate dielectric GaAs MOS device with LaON as interlayer and NH_3-plasma surface pretreatment

High-k gate dielectric Hf Ti ON Ga As metal-oxide–semiconductor（MOS） capacitors with La ON as interfacial passivation layer（IPL） and NH3- or N2-plasma surface pretreatment are fabricated, and their interfacial and electrical properties are investigated and compared with their counterparts that have neither La ON IPL nor surface treatment. It is found that good interface quality and excellent electrical properties can be achieved for a NH3-plasma pretreated Ga As MOS device with a stacked gate dielectric of Hf Ti ON/La ON. These improvements should be ascribed to the fact that the NH3-plasma can provide H atoms and NH radicals that can effectively remove defective Ga/As oxides. In addition, La ON IPL can further block oxygen atoms from being in-diffused, and Ga and As atoms from being out-diffused from the substrate to the high-k dielectric. This greatly suppresses the formation of Ga/As native oxides and gives rise to an excellent high-k/Ga As interface.

Electrical Properties of Ultra Thin Nitride/Oxynitride Stack Dielectrics pMOS Capacitor with Refractory Metal Gate

Electrical properties of high quality ultra thin nitride/oxynitride(N/O)stack dielectrics pMOS capacitor with refractory metal gate electrode are investigated,and ultra thin (<2 nm) N/O stack gate dielectrics with significant low leakage current and high resistance to boron penetration are fabricated.Experiment results show that the stack gate dielectric of nitride/oxynitride combined with improved sputtered tungsten/titanium nitride (W/TiN) gate electrode is one of the candidates for deep sub-micron metal gate CMOS devices.

A High Performance Sub-100nm Nitride/Oxynitride Stack Gate Dielectric CMOS Device with Refractory W/TiN Metal Gates

By complementing the equivalent oxide thickness （EOT） of a 1.7nm nitride/oxynitride （N/O） stack gate dielectric （EOT- 1.7nm） with a W/TiN metal gate electrode,metal gate CMOS devices with sub-100nm gate length are fabricated in China for the first time. The key technologies adopted to restrain SCE and to improve drive ability include a 1.7nm N/O stack gate dielectric, non-CMP planarization technology, a T-type refractory W/TiN metal stack gate electrode, and a novel super steep retrograde channel doping using heavy ion implantation and a double sidewall scheme. Using these optimized key technologies, high performance 95nm metal gate CMOS devices with excellent SCE and good driving ability are fabricated. Under power supply voltages of VDS ± 1.5V and VGS± 1.8V,drive currents of 679μA/μm for nMOS and - 327μA/μm for pMOS are obtained. A subthreshold slope of 84.46mV/dec, DIBL of 34.76mV/V, and Vth of 0.26V for nMOS, and a subthreshold slope of 107.4mV/dec,DIBL of 54.46mV/V, and Vth of 0.27V for pMOS are achieved. These results show that the combined technology has indeed thoroughly eliminated the boron penetration phenomenon and polysilicon depletion effect ,effectively reduced gate tunneling leakage, and improved device reliability.

The influence and explanation of fringing-induced barrier lowering on sub-100 nm MOSFETs with high-k gate dielectrics

The fringing-induced barrier lowering（FIBL） effect of sub-100 nm MOSFETs with high-k gate dielectrics is investigated using a two-dimensional device simulator.An equivalent capacitance theory is proposed to explain the physics mechanism of the FIBL effect.The FIBL effect is enhanced and the short channel performance is degraded with increasing capacitance.Based on equivalent capacitance theory,the influences of channel length,junction depth,gate/lightly doped drain（LDD） overlap length,spacer material and spacer width on FIBL is thoroughly investigated.A stack gate dielectric is presented to suppress the FIBL effect.

A threshold-voltage model for small-scaled GaAs nMOSFET with stacked high-k gate dielectric

A threshold-voltage model for a stacked high-k gate dielectric GaAs MOSFET is established by solving a two-dimensional Poisson＇s equation in channel and considering the short-channel, DIBL and quantum effects. The simulated results are in good agreement with the Silvaco TCAD data, confirming the correctness and validity of the model. Using the model, impacts of structural and physical parameters of the stack high-k gate dielectric on the threshold-voltage shift and the temperature characteristics of the threshold voltage are investigated. The results show that the stacked gate dielectric structure can effectively suppress the fringing-field and DIBL effects and improve the threshold and temperature characteristics, and on the other hand, the influence of temperature on the threshold voltage is overestimated if the quantum effect is ignored.

Direct tunneling gate current model for symmetric double gate junctionless transistor with SiO_2/high-k gate stacked dielectric

A junctionless transistor is emerging as a most promising device for the future technology in the decananometer regime. To explore and exploit the behavior completely, the understanding of gate tunneling current is of great importance. In this paper we have explored the gate tunneling current of a double gate junctionless transistor（DGJLT） for the first time through an analytical model, to meet the future requirement of expected high-k gate dielectric material that could replace SiO2. We therefore present the high-k gate stacked architecture of the DGJLT to minimize the gate tunneling current. This paper also demonstrates the impact of conduction band offset,workfunction difference and k-values on the tunneling current of the DGJLT.

Improvement of Ge MOS Electrical and Interfacial Characteristics by using NdAlON as Interfacial Passivation Layer

The Ge metal-oxide-semiconductor (MOS) capacitors were fabricated with HfO2 as gate dielectric.AlON,NdON,and NdAlON were deposited between the gate dielectric and the Ge substrate as the interfacial passivation layer (IPL).The electrical properties (such as capacitance-voltage (C-V) and gate leakage current density versus gate voltage (J_(g)-V_(g))) were measured by HP4284A precision LCR meter and HP4156A semiconductor parameter analyzer.The chemical states and interfacial quality of the high-k/Ge interface were investigated by X-ray photoelectron spectroscopy (XPS).The experimental results show that the sample with the NdAlON as IPL exhibits the excellent interfacial and electrical properties.These should be attributed to an effective suppression of the Ge suboxide and HfGeOx interlayer,and an enhanced blocking role against inter-diffusion of the elements during annealing by the NdAlON IPL.

High-performance enhancement-mode AlGaN/GaN MOS-HEMTs with fluorinated stack gate dielectrics and thin barrier layer

We present high-performance enhancement-mode AlGaN/GaN metal-oxide-semiconductor highelectron mobility transistors（MOS-HEMTs） by a fluorinated gate dielectric technique.A nanolaminate of an Al_2O_3/La_xAl_（1-x）O_3/Al_2O_3 stack（x≈0.33） grown by atomic layer deposition is employed to avoid fluorine ions implantation into the scaled barrier layer.Fabricated enhancement-mode MOS-HEMTs exhibit an excellent performance as compared to those with the conventional dielectric-last technique,delivering a large maximum drain current of 916 mA/mm and simultaneously a high peak transconductance of 342 mS/mm.The balanced DC characteristics indicate that advanced gate stack dielectrics combined with buffered fluorine ions implantation have a great potential for high speed GaN E/D-mode integrated circuit applications.

Analytical modeling of the direct tunneling current through high-k gate stacks for long-channel cylindrical surrounding-gate MOSFETs

An analytical direct tunneling gate current model for cylindrical surrounding gate（CSG） MOSFETs with high-k gate stacks is developed. It is found that the direct tunneling gate current is a strong function of the gate＇s oxide thickness, but that it is less affected by the change in channel radius. It is also revealed that when the thickness of the equivalent oxide is constant, the thinner the first layer, the smaller the direct tunneling gate current.Moreover, it can be seen that the dielectric with a higher dielectric constant shows a lower tunneling current than expected. The accuracy of the analytical model is verified by the good agreement of its results with those obtained by the three-dimensional numerical device simulator ISE.

Investigation on interfacial and electrical properties of Ge MOS capacitor with different NH_3-plasma treatment procedure

The effects of different NH3-plasma treatment procedures on interracial and electrical properties of Ge MOS capacitors with stacked gate dielectric of HtTiON/TaON were investigated. The NH3-plasma treatment was performed at different steps during fabrication of the stacked gate dielectric, i.e. before or after interlayer （TaON） deposition, or after deposition ofhigh-k dielectric （HfriON）. It was found that the excellent interface quality with an interface-state density of 4.79 × 101l eV-lcm-2 and low gate leakage current （3.43 ×10-5 A/cm2 at Vg = 1 V） could be achieved for the sample with NH3-plasma treatment directly on the Ge surface before TaON deposition. The involved mechanisms are attributed to the fact that the NH3-plasma can directly react with the Ge surface to form more Ge-N bonds, i.e. more GeOxNy, which effectively blocks the inter-diffusion of elements and suppresses the formation of unstable GeOx interfacial layer, and also passivates oxygen vacancies and dangling bonds near/at the interface due to more N incorporation and decomposed H atoms from the NH3-plasma.