Optimization and Sizing of a Stand-Alone Photovoltaic System and Assessment of Random Load Fluctuation on Power Supply

This study presents an optimization technique and design for a stand-alone photovoltaic (PV) system to provide the required electricity for a single residential household in remote areas. From the basic solar components analysis, the irradiance on tilted surface is derived and compared to that on horizontal surface for Furu-Awa locality to infer the appropriate tilt angle (β) that maximizes the collection of solar energy. Seven optimum values of β applicable to the PV network were then derived depending of the period of the year and this simulation resulted that the panels are to be adjusted seven times a year. The optimization technique for load demand based on total apparent power of the household appliances produces an increase of 18% compared to the simple case of the PV components design using active power but leads to the optimum configuration that meets the real load demand of the household. Following the sizing of the station, reliability tests simulations were conducted for a one year corresponding period to infer the sensitivity of power supply to initial state of charge, to check the system autonomy and to evaluate the effect of random variation of the load on the smooth functioning of the PV system using a pseudo random number generator. This analysis shows that the minimum capacity of the battery for normal run of the Plan is 22.2% and that with random fluctuation of load, there will be periods of the year where the system experiences power failure depending on how important is the variation. The result of the study may imply a small increase in the cost of the entire plant but improves the stability and flexibility of such a station.

Maximum Power Point Tracking Control Using Neural Networks for Stand-Alone Photovoltaic Systems

The employment of maximum power point tracking techniques in the photovoltaic power systems is well known and even of immense importance. There are various techniques to track the maximum power point reported in several literatures. In such context, there is an increasing interest in developing a more appropriate and effective maximum power point tracking control methodology to ensure that the photovoltaic arrays guarantee as much of their available output power as possible to the load for any temperature and solar radiation levels. In this paper, theoretical details of the work, carried out to develop and implement a maximum power point tracking controller using neural networks for a stand-alone photovoltaic system, are presented. Attention has been also paid to the command of the power converter to achieve maximum power point tracking. Simulations results, using Matlab/Simulink software, presented for this approach under rapid variation of insolation and temperature conditions, confirm the effectiveness of the proposed method both in terms of efficiency and fast response time. Negligible oscillations around the maximum power point and easy implementation are the main advantages of the proposed maximum power point tracking (MPPT) control method.

Modeling and Optimization of Stand-Alone Hybrid Power System : a Case Study for a Household in Urumqi,China

In order to alleviate environmental pollution of Urumqi,China,a stand-alone hybrid wind / PV / battery power system was studied for this region. An accurate structure and model of the standalone hybrid wind / PV / battery power system for a household in that region was presented in this study. On the basis of wind speed,solar radiation,ambient temperature,and load data,the optimal design of the hybrid system is determined using a genetic algorithm( GA). As a result,the optimal hybrid system for a household consists of one wind turbine,21. 407 6 m^2 of PV arrays,and 20. 958 kW ·h of battery bank capacity. The system has a loss of power supply probability( LPSP) of 0. 019 9 and the minimum total annualized cost is $ 35 333.

Stand-Alone Wind Power System Operating with Different Storage Structures

This paper deals with control method related to a wind system operating in stand-alone applications. The stand-alone wind system is composed of three energy transfer subsystems： wind generator subsystem （wind turbine and electrical generator）, energy storage subsystem, respectively, specific local network subsystem （controlled loads）. This wind power system performs in the same time the maximization of wind energy conversion and the power balance between produced and required power. Three structures of the energy storage subsystem, based on buffer battery operation and/or capacitor voltage control, are discussed. The simulation results show that the proposed stand-alone wind power system ensures a good management of the local energy request. The design of the structures is analyzed in Matlab/Simulink environment, using PowerSim toolbox.

开发基于Matlab的Stand-Alone软件

Matlab语言是国际上使用最为广泛的科学与工程计算软件工具,但是由Matlab生成的代码不能脱离Matlab环境运行。如何令Matlab代码能够完全脱离Matlab环境独立运行,对于各专业人员借助Matlab语言快速开发出具备强大计算功能的专业应用软件具有重要的意义。本文在分析了Matlab软件的优缺点的基础上,给出了使包含Matlab代码的应用软件能够脱离Matlab环境运行的具体步骤和方法。

ICU患者置入Power PICC导管特殊异位原因分析

目的:探讨ICU患者置入Power PICC导管后头端反折向上至同侧和对侧锁骨下静脉、头臂静脉等特殊异位的相关因素。方法:回顾性分析2021年9月至2022年9月某三甲医院ICU 520例PICC置管患者,通过胸部X线确定PICC导管头端反折向上至对侧和同侧锁骨下静脉、头臂静脉的患者,分析其特殊异位发生因素。结果:胸部X线结果显示25例患者PICC管头端反折向上异位至对侧和同侧锁骨下静脉、头臂静脉或颈内静脉,异位发生率4.8%,不同静脉置管反折异位发生率相比差异无统计学意义,P>0.05。结论:ICU患者PICC置入发生导管头端反折向上至同侧和对侧锁骨下静脉、头臂静脉等特殊异位的发生因素较多,包括同时留置CVC或血透管、正在滴注或泵入多种药物、PICC管头端异位的隐匿性、导管材质、自身疾病及机械通气等危险因素。

Optimal Configuration for Design of Stand-Alone PV System

This paper presents a design for a stand-alone photovoltaic (PV) system to provide the required electricity for a single residential household in rural area in Jordan. The complete design steps for the suggested household loads are carried out. Site radiation data and the electrical load data of a typical household in the considered site are taken into account during the design steps. The reliability of the system is quantified by the loss of load probability. A computer program is developed to simulate the PV system behavior and to numerically find an optimal combination of PV array and battery bank for the design of stand-alone photovoltaic systems in terms of reliability and costs. The program calculates life cycle cost and annualized unit electrical cost. Simulations results showed that a value of loss of load probability LLP can be met by several combinations of PV array and battery storage. The method developed here uniquely determines the optimum configuration that meets the load demand with the minimum cost. The difference between the costs of these combinations is very large. The optimal unit electrical cost of 1 kWh for LLP = 0.049 is $0.293;while for LLP 0.0027 it is $0.402. The results of the study encouraged the use of the PV systems to electrify the remote sites in Jordan.

Jaya Learning-Based Optimization for Optimal Sizing of Stand-Alone Photovoltaic,Wind Turbine,and Battery Systems

Renewable energy sources(RESs)are considered to be reliable and green electric power generation sources.Photovoltaics(PVs)and wind turbines(WTs)are used to provide electricity in remote areas.Optimal sizing of hybrid RESs is a vital challenge in a stand-alone environment.The meta-heuristic algorithms proposed in the past are dependent on algorithm-specific parameters for achieving an optimal solution.This paper proposes a hybrid algorithm of Jaya and a teaching–learning-based optimization(TLBO)named the JLBO algorithm for the optimal unit sizing of a PV–WT–battery hybrid system to satisfy the consumer’s load at minimal total annual cost(TAC).The reliability of the system is considered by a maximum allowable loss of power supply probability(LPSPmax)concept.The results obtained from the JLBO algorithm are compared with the original Jaya,TLBO,and genetic algorithms.The JLBO results show superior performance in terms of TAC,and the PV–WT–battery hybrid system is found to be the most economical scenario.This system provides a cost-effective solution for all proposed LPSPmax values as compared with PV–battery and WT–battery systems.

A Case Study to Determine Optimal Capacity of a Stand-Alone Wind/PV/Battery System

In this paper, a stand-alone hybrid microgrid consisting of wind turbines, photovoltaic (PV) arrays and storage battery banks is developed for use in Qinghai Province, China. With the help of Software Homer and Matlab, different variables such as annual average wind speed, annual average load demand, and annual capacity shortage are considered. The net present value is then used during an entire project lifetime for the optimization solution.

Power-V诱导的钻柱黏滑振动特征分析

黏滑是石油钻井过程中影响钻井效率和井下钻柱安全的一种振动形式.垂直钻井系统Power-V在提供有效控斜力的同时,还会诱导钻柱黏滑振动.通过研究垂直钻井系统Power-V与井壁的接触作用及钻头与地层的相互作用模型,基于钻柱动力学有限元方法,深入分析Power-V的作用机理,研究其对扭转振动的影响,指出Power-V和井壁间的相互作用会导致钻柱与井壁的摩阻显著增加,进而引起摩阻扭矩的增大,诱导井下黏滑振动.实测振动数据证实,Power-V与井壁间的相互作用是引起钻柱黏滑振动的关键因素.这对于揭示黏滑振动的成因和更好地发挥Power-V的作用具有重要意义.

基于调和概率语言术语集的Power平均算子

实践发现现存概率语言Power平均算子在应用中存在概率信息丢失、计算过于繁琐等问题,针对这些问题,提出一种基于调和概率语言术语集的Power平均算子。结合新的基本运算法则与新的支撑度,给出新的概率语言Power平均算子、概率语言Power几何平均算子、概率语言Power加权平均算子、概率语言Power加权几何平均算子,同时论证分析了这几类新型算子的性质。最后通过实验数据,将提出的算子与现存算子进行对比分析,验证了所提算子的有效性与可行性。

Stand-alone XLIF治疗退变性脊柱侧凸

目的评估Stand-alone XLIF(即不使用螺钉内固定的单纯极外侧入路椎间融合术)治疗退变性脊柱侧凸(DS)的临床疗效。方法回顾性分析南部战区总医院采用Stand-alone XLIF治疗的15例DS患者的临床资料,其中单节段8例、双节段4例、三节段1例、四节段2例,共27个节段。采用腰椎Oswestry功能障碍指数(ODI)、日本骨科学会(JOA)评分和腰腿痛视觉模拟量表(VAS)评分评估患者的临床疗效;测量术前和末次随访时腰椎冠状面Cobb角和椎间孔高度,观察随访期间植骨融合及并发症发生情况。结果随访时间1~9年,平均随访时间4.2年。末次随访时腰椎ODI、JOA评分和VAS评分均较术前改善(P<0.05),术前、末次随访腰椎冠状面Cobb角和椎间孔高度分别为(28.1±5.8)°、(11.7±3.6)°和(16.3±2.5)、(19.2±2.7)mm,手术前后比较,差异有统计学意义(P<0.05)。术后1年24个节段(89%)获植骨融合,3个节段植骨延迟愈合。术后4例出现腹胀,5例出现腹股沟区一过性麻木或疼痛。随访期间未有内固定松动、感染并发症发生。结论在合理选择适应证的前提下,Stand-alone XLIF具有微创、术后恢复快的优势,可有效治疗DS。

数据可视化Power BI在职业院校学生管理中的应用

职业院校学生管理是一个重要而复杂的任务,需要学校管理人员的精心组织和有效执行。随着信息技术的发展和校园信息化建设的需求,部分职业院校的学生管理服务系统已初步建成。BI数据可视化可以有效地利用大量的系统数据,为院校管理者提高决策和治理水平提供依据。本文通过对BI数据可视化过程和结构进行分析,比较Power BI与传统型BI的差异,通过对Power BI数据可视化在职业院校学生管理中的应用分析和实践案例,验证数据可视化PowerBI在学生管理中的重要作用。

基于GT-Power的排气轰鸣噪声控制与优化研究

针对某1.5T三缸发动机车型排气尾管噪声在1 280 r/min、1 550 r/min转速下出现轰鸣声的问题,对其排气系统消声器结构进行优化设计,从而达到消除该轰鸣声的目标。分析了排气尾管轰鸣声的产生原因,并解释了轰鸣产生的机理,得出该轰鸣声是消声器在96~116 Hz下消声量不足的结论。通过GT-Power软件基于传递损失仿真结果优化了排气系统消声器结构,并建立发动机模型,与优化后的排气系统模型进行噪声仿真,仿真结果满足优化要求。在整车半消声室中进行了排气尾管噪声测试试验,测试结果验证了分析结果的准确性,且优化方案排气尾管轰鸣声消失,中高转速下噪声降低2 dB(A)

Computing Power Network:A Survey

With the rapid development of cloud computing,edge computing,and smart devices,computing power resources indicate a trend of ubiquitous deployment.The traditional network architecture cannot efficiently leverage these distributed computing power resources due to computing power island effect.To overcome these problems and improve network efficiency,a new network computing paradigm is proposed,i.e.,Computing Power Network(CPN).Computing power network can connect ubiquitous and heterogenous computing power resources through networking to realize computing power scheduling flexibly.In this survey,we make an exhaustive review on the state-of-the-art research efforts on computing power network.We first give an overview of computing power network,including definition,architecture,and advantages.Next,a comprehensive elaboration of issues on computing power modeling,information awareness and announcement,resource allocation,network forwarding,computing power transaction platform and resource orchestration platform is presented.The computing power network testbed is built and evaluated.The applications and use cases in computing power network are discussed.Then,the key enabling technologies for computing power network are introduced.Finally,open challenges and future research directions are presented as well.

Power BI在我院药品数据可视化中的应用

目的加强医院药品精细化管理,提升药师对药品的数据分析能力,实现数据分析自动化及查询功能,为集采药品、麻精药品的动态监管提供数据支撑。方法使用数据可视化工具Power BI搭建服务,制作报表,能够查询药品使用情况和对比情况,实现各科室药品使用情况的可视化管理。结果通过该软件,药师可以精确查询任意时间维度下药品的使用数量、金额等情况,实现数据分析自动化。结论借助数据管理工具能够帮助药师提升数据分析能力和工作效率,有助于加强医院药品的精细化管控。

A Summary of Optimal Methods for the Planning of Stand-alone Microgrid System

This paper describes the characteristics and optimal methods for the planning of stand-alone microgrid system, in order to improve the power supply reliability, increase the coefficient of utilization of renewable energy and reduce the cost of investment and operation. Next, the problems in the optimal planning for a stand-alone microgrid system are summarized, including the unique operational control targets, the flexible combination approaches and the operation strategies of distributed generation energy supply system, and the special requirements of the reliability of power supply quality factor from the different users. And then, centering on the operational control and the advanced energy management strategy, the optimal mathematical models and the solving methods, the reliability assessment approaches and the improvement measures of a stand-alone microgrid system, an overview of the general situation of the recent research at home and abroad and the limitations of the study are summarized. Finally, several problems, existing in the optimal planning of stand-alone microgrid system, to be urgently solved, are put forward.

Carbon emission reduction:Contribution of photovoltaic power and practice in China

As a clean and renewable form of energy,photovoltaic(PV)power generation converts solar energy into electrical energy,reducing the consumption of fossil fuels and significantly lowering greenhouse gas emissions.Amidst the global transition towards cleaner forms of energy,countries all around the world are vigorously developing PV technology.

Traction power systems for electrified railways:evolution,state of the art,and future trends

Traction power systems(TPSs)play a vital role in the operation of electrified railways.The transformation of conventional railway TPSs to novel structures is not only a trend to promote the development of electrified railways toward high-efficiency and resilience but also an inevitable requirement to achieve carbon neutrality target.On the basis of sorting out the power supply structures of conventional AC and DC modes,this paper first reviews the characteristics of the existing TPSs,such as weak power supply flexibility and low-energy efficiency.Furthermore,the power supply structures of various TPSs for future electrified railways are described in detail,which satisfy longer distance,low-carbon,high-efficiency,high-reliability and high-quality power supply requirements.Meanwhile,the application prospects of different traction modes are discussed from both technical and economic aspects.Eventually,this paper introduces the research progress of mixed-system electrified railways and traction power supply technologies without catenary system,speculates on the future development trends and challenges of TPSs and predicts that TPSs will be based on the continuous power supply mode,employing power electronic equipment and intelligent information technology to construct a railway comprehensive energy system with renewable energy.

基于Power BI的DRGs数据分析方法

目的:探讨利用Power BI工具对DRGs数据进行有效分析,揭示潜在的数据特征和规律。方法:运用Power BI工具对2017年―2021年DRGs数据进行数据连接、数据清洗和处理等操作,提取和计算相关DRGs评价指标,最后通过可视化展示的方式对DRGs数据进行分析和呈现,从不同维度和角度深入研究DRGs数据特征和规律。结果:通过对2017年―2021年DRGs数据处理和可视化展示,能直观了解出院患者疾病构成、医疗资源利用、临床质量评估和医疗成本效益等总体情况,为提高医疗服务质量和资源利用效率等提供可行的解决方案。结论:基于Power BI的DRGs数据分析方法能够有效地帮助医院进行医疗费用控制和资源配置,并提高医疗服务的质量和效率。此方法为优化DRGs数据管理和医疗资源配置提供了重要的参考和借鉴价值。