The Hot Dry Rock(HDR)is considered as a clean and renewable energy,poised to significantly contribute to the global energy decarbonization agenda.Many HDR projects worldwide have accumulated valuable experience in eff...The Hot Dry Rock(HDR)is considered as a clean and renewable energy,poised to significantly contribute to the global energy decarbonization agenda.Many HDR projects worldwide have accumulated valuable experience in efficient drilling and completion,reservoir construction,and fracture simulation.In 2019,China Geological Survey(CGS)initiated a demonstration project of HDR exploration and production in the Gonghe Basin,aiming to overcome the setbacks faced by HDR projects.Over the ensuing four years,the Gonghe HDR project achieved the first power generation in 2021,followed by the second power generation test in 2022.After establishing the primary well group in the initial phase,two directional wells and one branch well were drilled.Noteworthy progress was made in successfully constructing the targeted reservoir,realizing inter-well connectivity,power generation and grid connection,implementing of the real-time micro-seismic monitoring.A closed-loop technical validation of the HDR exploration and production was completed.However,many technical challenges remain in the process of HDR industrialization,such as reservoir fracture network characterization,efficient drilling and completion,multiple fracturing treatment,continuous injection and production,as well as mitigation of induced seismicity and numerical simulation technology.展开更多
The excellent properties of SiC bring new challenges for the device packaging.In this study,the bonding strength,fracture behaviors and microstructural evolution of micron-porous Ag joint were elevated during thermal ...The excellent properties of SiC bring new challenges for the device packaging.In this study,the bonding strength,fracture behaviors and microstructural evolution of micron-porous Ag joint were elevated during thermal cycling(–50 ℃–250 ℃) in SiC/DBC(direct bonding copper) die attachment structure for different time.During harsh thermal shock test,the strength of sintered joint deceased gradually with the increase of cycling number,and the value just was half of the value of as-sintered after 1 000 cycles.Coarsening of Ag grains was observed in micron-porous joint with the structure inhomogeneity and defects increasing,which were the reasons of the strength decease.In addition,it was also found that the fracture behavior of sintered joints was changed from ductile deformation of Ag grain to brittle fracture of crack propagation after 1 000 cycles.This study will add the understanding in the mechanical properties of Ag sinter joining and its applications at high temperature.展开更多
The Shanghai High Repetition Rate XFEL and Extreme Light Facility(SHINE)project will use 6001.3 GHz fundamental power couplers,which are modified based on TTF-Ⅲ power couplers,for continuous-wave operation with input...The Shanghai High Repetition Rate XFEL and Extreme Light Facility(SHINE)project will use 6001.3 GHz fundamental power couplers,which are modified based on TTF-Ⅲ power couplers,for continuous-wave operation with input power up to approximately 7 kW.The first batch of 20 sets of 1.3 GHz coupler prototypes was fabricated from three domestic manufacturers for the SHINE project.To better characterize the radio frequency conditioning phenomena for validating the performance of power couplers,a room temperature test stand was designed,constructed,and commissioned for the SHINE 1.3 GHz power couplers.In addition,a horizontal test cryostat was built to test the 1.3 GHz superconducting cavities,fundamental power couplers,tuners,and other components as a set.The results of these tests indicate that the 1.3 GHz couplers are capable of handling up to 14 kW continuous waves.Herein,the main aspects of the radio frequency design and construction of the test stand,along with the test results of the high-power conditioning of the 1.3 GHz couplers,are described.展开更多
The test process of electric vehicles (EVs) traction battery peak power is analyzed in detail. Aimed at a special “traction” design of versatile battery—HORIZON~ C~2M Battery, the features are introduced. According...The test process of electric vehicles (EVs) traction battery peak power is analyzed in detail. Aimed at a special “traction” design of versatile battery—HORIZON~ C~2M Battery, the features are introduced. According to the peak power test schedule, the test parameters of HORIZON~ C~2M Battery are calculated and the charging and discharging experiments are carried out. The sustained (30 s) discharge power capability of battery at 2/3 of its open circuit voltage at each of various depths of discharge is determined. The dynamic internal resistance under peak power test is established. Considering the temperature impact during discharging, the peak power capability at each of various depths of discharge is corrected. The correctness of peak power test is validated by combining theory analysis with test results.展开更多
Hot dry rock(HDR)is a kind of clean energy with significant potential.Since the 1970s,the United States,Japan,France,Australia,and other countries have attempted to conduct several HDR development research projects to...Hot dry rock(HDR)is a kind of clean energy with significant potential.Since the 1970s,the United States,Japan,France,Australia,and other countries have attempted to conduct several HDR development research projects to extract thermal energy by breaking through key technologies.However,up to now,the development of HDR is still in the research,development,and demonstration stage.An HDR exploration borehole(with 236℃ at a depth of 3705 m)was drilled into Triassic granite in the Gonghe Basin in northwest China in 2017.Subsequently,China Geological Survey(CGS)launched the HDR resources exploration and production demonstration project in 2019.After three years of efforts,a sequence of significant technological breakthroughs have been made,including the genetic model of deep heat sources,directional drilling and well completion in high-temperature hard rock,large-scale reservoir stimulation,reservoir characterization,and productivity evaluation,reservoir connectivity and flow circulation,efficient thermoelectric conversion,monitoring,and geological risk assessment,etc.Then the whole-process technological system for HDR exploration and production has been preliminarily established accordingly.The first power generation test was completed in November 2021.The results of this project will provide scientific support for HDR development and utilization in the future.展开更多
This paper derives the variance of the information content and develops its statistical inference method. We describe the relations between information content and sensitivity, specificity, efficiency, prevalence rate...This paper derives the variance of the information content and develops its statistical inference method. We describe the relations between information content and sensitivity, specificity, efficiency, prevalence rate. If sensitivity, specificity and efficiency are fixed, the closer to 0. 5 the prevalence rate is, the more the information content. If prevalence rate and efficiency are fixed, the closer to each other the sensitivity and specificity are, the more the information content. We compare the power of information content method, efficiecy test, Youden's index test and kappa coefficient method. The information content method has higher power than the other methods in most conditions. It is especially sensitive to the difference between two sensitivities. It comes to conclusion that the information content method has more virtues than the other methods mentioned in this paper.展开更多
This paper presents an approach for estimating power of the score test, based on an asymptotic approximation to the power of the score test under contiguous alternatives. The method is applied to the problem of power ...This paper presents an approach for estimating power of the score test, based on an asymptotic approximation to the power of the score test under contiguous alternatives. The method is applied to the problem of power calculations for the score test of heteroscedasticity in European rabbit data (Ratkowsky, 1983). Simulation studies are presented which indicate that the asymptotic approximation to the finite-sample situation is good over a wide range of parameter configurations.展开更多
A novel design and implementation of frequency superposition testing power supply for induction motor is proposed. An equivalent power using dynamic space voltage vector synthesis is generated to replace the two separ...A novel design and implementation of frequency superposition testing power supply for induction motor is proposed. An equivalent power using dynamic space voltage vector synthesis is generated to replace the two separate powers of the traditional method. The principle of frequency superposition testing is firstly introduced, and then the detailed design and implementation of the digital frequency superposition power are given. The simulation of the power supply system shows the promising results. Finally, experimental results validate the feasibility and reliability of the proposed power.展开更多
The use of high-temperature fuel cells as a power technology can improve the efficiency of electricity generation and achieve near-zero emissions of carbon dioxide.This work explores the performance of a 10 kW high-te...The use of high-temperature fuel cells as a power technology can improve the efficiency of electricity generation and achieve near-zero emissions of carbon dioxide.This work explores the performance of a 10 kW high-temperature molten carbonate fuel cell.The key materials of a single cell were characterized and analyzed using X-ray diffraction and scanning electron microscopy.The results show that the pore size of the key electrode material is 6.5 lm and the matrix material is a-LiAlO_(2).Experimentally,the open circuit voltage of the single cell was found to be 1.23 V.The current density was greater than 100 mA/cm^(2)at an operating voltage of 0.7 V.The 10 kW fuel cell stack comprised 80 single fuel cells with a total area of 2000 cm^(2)and achieved an open circuit voltage of greater than 85 V.The fuel cell stack power and current density could reach 11.7 kW and 104.5 mA/cm2 at an operating voltage of 56 V.The influence and long-term stable operation of the stack were also analyzed and discussed.The successful operation of a 10 kW high-temperature fuel cell promotes the large-scale use of fuel cells and provides a research basis for future investigations of fuel cell capacity enhancement and distributed generation in China.展开更多
In this study, the statistical powers of Kolmogorov-Smimov two-sample (KS-2) and Wald Wolfowitz (WW) tests, non-parametric tests used in testing data from two independent samples, have been compared in terms of fi...In this study, the statistical powers of Kolmogorov-Smimov two-sample (KS-2) and Wald Wolfowitz (WW) tests, non-parametric tests used in testing data from two independent samples, have been compared in terms of fixed skewness and fixed kurtosis by means of Monte Carlo simulation. This comparison has been made when the ratio of variance is two as well as with equal and different sample sizes for large sample volumes. The sample used in the study is: (25, 25), (25, 50), (25, 75), (25, 100), (50, 25), (50, 50), (50, 75), (50, 100), (75, 25), (75, 50), (75, 75), (75, 100), (100, 25), (100, 50), (100, 75), and (100, 100). According to the results of the study, it has been observed that the statistical power of both tests decreases when the coefficient of kurtosis is held fixed and the coefficient of skewness is reduced while it increases when the coefficient of skewness is held fixed and the coefficient of kurtosis is reduced. When the ratio of skewness is reduced in the case of fixed kurtosis, the WW test is stronger in sample volumes (25, 25), (25, 50), (25, 75), (25, 100), (50, 75), and (50, 100) while KS-2 test is stronger in other sample volumes. When the ratio of kurtosis is reduced in the case of fixed skewness, the statistical power of WW test is stronger in volume samples (25, 25), (25, 75), (25, 100), and (75, 25) while KS-2 test is stronger in other sample volumes.展开更多
As the appearance of local dimming technique, the current existing test methods are not suitable for testing the power consumption of the LCD TVs using the local dimming technique any longer. A test method appropriate...As the appearance of local dimming technique, the current existing test methods are not suitable for testing the power consumption of the LCD TVs using the local dimming technique any longer. A test method appropriate to LED backlight LCD TVs using the local dimming technique is proposed in this paper, and then the test software is developed. The results demonstrate that the test software developed can show the real average power consumption of the LCD using local dimming technique, and by normalization the power consumption become comparable for not only local dimming LCD TVs but global dimming LCD TVs. Using the software developed in this paper, the ratio of power saving is clear when an LCD TV using the local dimming technique compared with one without local dimming technique.展开更多
In this paper, the roughness of the model function to the basis functions and its properties have been considered. We also consider some conditions to take the limit of the roughness when the observations are i.i.d. A...In this paper, the roughness of the model function to the basis functions and its properties have been considered. We also consider some conditions to take the limit of the roughness when the observations are i.i.d. An explicit formula to calculate the power of change-point test for the two phases regression through the roughness was obtained.展开更多
A two stage scan architecture is proposed to do low power and low test application cost scan testing. The first stage includes multiple scan chains, where each scan chain is driven by a primary input. Each scan flip-f...A two stage scan architecture is proposed to do low power and low test application cost scan testing. The first stage includes multiple scan chains, where each scan chain is driven by a primary input. Each scan flip-flop in the multiple scan chains drives a group of scan flip-flops. The scan flip-flop in the multiple scan chain and the scan flip-flop driven by it are assigned the same values for all test vectors. Scan flip-flops in the multiple scan chains and those in the second stage use separate clock signals, but the design for testability technqiue needs only one clock. The proposed scan architecture localizes test power consumption to the multiple scan chains during test application. Test signals assigned to scan flip-fiops in the multiple scan chains are applied to the scan flip-flops in the second stage after the test vector has been applied to the multiple scan chains. This technique can make test power consumption very small.展开更多
The insulated gate bipolar transistor(IGBT)module is one of the most age-affected components in the switch power supply, and its reliability prediction is conducive to timely troubleshooting and reduction in safety ri...The insulated gate bipolar transistor(IGBT)module is one of the most age-affected components in the switch power supply, and its reliability prediction is conducive to timely troubleshooting and reduction in safety risks and unnecessary costs. The pulsed current pattern of the accelerator power supply is different from other converter applications;therefore, this study proposed a lifetime estimation method for IGBT modules in pulsed power supplies for accelerator magnets. The proposed methodology was based on junction temperature calculations using square-wave loss discretization and thermal modeling.Comparison results showed that the junction temperature error between the simulation and IR measurements was less than 3%. An AC power cycling test under real pulsed power supply applications was performed via offline wearout monitoring of the tested power IGBT module. After combining the IGBT4 PC curve and fitting the test results,a simple corrected lifetime model was developed to quantitatively evaluate the lifetime of the IGBT module,which can be employed for the accelerator pulsed power supply in engineering. This method can be applied to other IGBT modules and pulsed power supplies.展开更多
To study the role of autonomic nervous system in the period of developing syncope induced by head-up tilt test(HUT), we analysed the changes of heart rate power spectral density(HRPSD) in 50 patients with unexplained ...To study the role of autonomic nervous system in the period of developing syncope induced by head-up tilt test(HUT), we analysed the changes of heart rate power spectral density(HRPSD) in 50 patients with unexplained syncope, including 15 positive patients (Group 1) and 35 negative patients(Group 2), and 15 negative healthy persons(Group 3) in 5 minute periods before and after tilting and 5 minutes before the end of test. HRPSD and their changes in total(T), very low-frequence(VLF), low-frequence(LF), high-frequence(HF) and the ratio of low/high frequence(LF/HF) were similar (P>0.05) 5 minutes before and after tilting among three groups. Five minutes before the end of test, Group 1 had obvious increase of T, VLF, LF and LF/HF while Group 2 and 3 had not such significant changes. There was significant difference(P<0.01) compared Group 1 with Group 2, 3. The results showed that the abnormal regulatory function of autonomic nervous system played an important role in the mechanism of symcope induced by HUT, the positive group had abnormal increase of sympathetic tone and imbalance of sympathetic/parasympathetic neural tone before syncope appeared.展开更多
When one applies the wavelet transform to analyze finite-length time series, discontinuities at the data boundaries will distort its wavelet power spectrum in some regions which are defined as a wavelength-dependent c...When one applies the wavelet transform to analyze finite-length time series, discontinuities at the data boundaries will distort its wavelet power spectrum in some regions which are defined as a wavelength-dependent cone of influence (COI). In the COI, significance tests are unreliable. At the same time, as many time series are short and noisy, the COI is a serious limitation in wavelet analysis of time series. In this paper, we will give a method to reduce boundary effects and discover significant frequencies in the COI. After that, we will apply our method to analyze Greenland winter temperature and Baltic sea ice. The new method makes use of line removal and odd extension of the time series. This causes the derivative of the series to be continuous (unlike the case for other padding methods). This will give the most reasonable padding methodology if the time series being analyzed has red noise characteristics.展开更多
Research to reliably predict the seismic response of nuclear power stations with a pile-raft foundation is needed to meet the high safety requirements of nuclear power stations.In this study,a scaled superstructure wi...Research to reliably predict the seismic response of nuclear power stations with a pile-raft foundation is needed to meet the high safety requirements of nuclear power stations.In this study,a scaled superstructure with a 4×3 pile-raft foundation,which is constructed in Shanxi kaolin clay,is modelled.Accordingly,the characteristics of seismic response for nuclear power stations with a pile-raft foundation are analyzed using dynamic centrifuge tests.In particular,multiple earthquake motions with different magnitudes and frequency properties are utilized to map the relationship between structural response and properties of earthquake motions.The results show that the seismic response of the soil,raft,and structure are significantly affected by the natural frequency and magnitude of the earthquake motion.The soil surface acceleration is lower than the raft acceleration.The results provide a reliable reference to better understand the seismic response of nuclear power stations.展开更多
Draxler and Zessin [1] derived the power function for a class of conditional tests of assumptions of a psychometric model known as the Rasch model and suggested an MCMC approach developed by Verhelst [2] for the numer...Draxler and Zessin [1] derived the power function for a class of conditional tests of assumptions of a psychometric model known as the Rasch model and suggested an MCMC approach developed by Verhelst [2] for the numerical approximation of the power of the tests. In this contribution, the precision of the Verhelst approach is investigated and compared with an exact sampling procedure proposed by Miller and Harrison [3] for which the discrete probability distribution to be sampled from is exactly known. Results show no substantial differences between the two numerical procedures and quite accurate power computations. Regarding the question of computing time the Verhelst approach will have to be considered much more efficient.展开更多
The authors consider the uniformly most powerful invariant test of the testing problems (Ⅰ) H 0: μ′Σ -1 μ≥CH 1: μ′Σ -1 μ<C and (Ⅱ) H 00 : β′X′Xβσ 2≥CH 11 : β′X′Xβσ 2<C u...The authors consider the uniformly most powerful invariant test of the testing problems (Ⅰ) H 0: μ′Σ -1 μ≥CH 1: μ′Σ -1 μ<C and (Ⅱ) H 00 : β′X′Xβσ 2≥CH 11 : β′X′Xβσ 2<C under m dimensional normal population N m(μ, Σ) and normal linear model (Y, Xβ, σ 2) respectively. Furthermore, an application of the uniformly most powerful invariant test is given.展开更多
In this paper, the weighted Kolmogrov-Smirnov, Cramer von-Miss and the Anderson Darling test statistics are considered as goodness of fit tests for the generalized Rayleigh interval grouped data. An extensive simulati...In this paper, the weighted Kolmogrov-Smirnov, Cramer von-Miss and the Anderson Darling test statistics are considered as goodness of fit tests for the generalized Rayleigh interval grouped data. An extensive simulation process is conducted to evaluate their controlling of type 1 error and their power functions. Generally, the weighted Kolmogrov-Smirnov test statistics show a relatively better performance than both, the Cramer von-Miss and the Anderson Darling test statistics. For large sample values, the Anderson Darling test statistics cannot control type 1 error but for relatively small sample values it indicates a better performance than the Cramer von-Miss test statistics. Best selection of the test statistics and highlights for future studies are also explored.展开更多
基金Funded by the“Investigation and Evaluation of the Hot Dry Rock Resources in the Guide-Dalianhai Area of the Gonghe Basin,Qinghai”(DD20211336,DD20211337,DD20211338)“Hot Dry Rock Resources Exploration and Production Demonstration Project”(DD20230018)of the China Geological Survey。
文摘The Hot Dry Rock(HDR)is considered as a clean and renewable energy,poised to significantly contribute to the global energy decarbonization agenda.Many HDR projects worldwide have accumulated valuable experience in efficient drilling and completion,reservoir construction,and fracture simulation.In 2019,China Geological Survey(CGS)initiated a demonstration project of HDR exploration and production in the Gonghe Basin,aiming to overcome the setbacks faced by HDR projects.Over the ensuing four years,the Gonghe HDR project achieved the first power generation in 2021,followed by the second power generation test in 2022.After establishing the primary well group in the initial phase,two directional wells and one branch well were drilled.Noteworthy progress was made in successfully constructing the targeted reservoir,realizing inter-well connectivity,power generation and grid connection,implementing of the real-time micro-seismic monitoring.A closed-loop technical validation of the HDR exploration and production was completed.However,many technical challenges remain in the process of HDR industrialization,such as reservoir fracture network characterization,efficient drilling and completion,multiple fracturing treatment,continuous injection and production,as well as mitigation of induced seismicity and numerical simulation technology.
基金partly supported by the Japan Society for the Promotion of Science (JSPS) Grant-in-Aid for Scientific Research (Grant No. 19121587)supported by the Natural Science Foundation of Shaanxi Province (No.2021KW-25)。
文摘The excellent properties of SiC bring new challenges for the device packaging.In this study,the bonding strength,fracture behaviors and microstructural evolution of micron-porous Ag joint were elevated during thermal cycling(–50 ℃–250 ℃) in SiC/DBC(direct bonding copper) die attachment structure for different time.During harsh thermal shock test,the strength of sintered joint deceased gradually with the increase of cycling number,and the value just was half of the value of as-sintered after 1 000 cycles.Coarsening of Ag grains was observed in micron-porous joint with the structure inhomogeneity and defects increasing,which were the reasons of the strength decease.In addition,it was also found that the fracture behavior of sintered joints was changed from ductile deformation of Ag grain to brittle fracture of crack propagation after 1 000 cycles.This study will add the understanding in the mechanical properties of Ag sinter joining and its applications at high temperature.
基金supported by Shanghai Municipal Science and Technology Major Project(No.2017SHZDZX02)。
文摘The Shanghai High Repetition Rate XFEL and Extreme Light Facility(SHINE)project will use 6001.3 GHz fundamental power couplers,which are modified based on TTF-Ⅲ power couplers,for continuous-wave operation with input power up to approximately 7 kW.The first batch of 20 sets of 1.3 GHz coupler prototypes was fabricated from three domestic manufacturers for the SHINE project.To better characterize the radio frequency conditioning phenomena for validating the performance of power couplers,a room temperature test stand was designed,constructed,and commissioned for the SHINE 1.3 GHz power couplers.In addition,a horizontal test cryostat was built to test the 1.3 GHz superconducting cavities,fundamental power couplers,tuners,and other components as a set.The results of these tests indicate that the 1.3 GHz couplers are capable of handling up to 14 kW continuous waves.Herein,the main aspects of the radio frequency design and construction of the test stand,along with the test results of the high-power conditioning of the 1.3 GHz couplers,are described.
文摘The test process of electric vehicles (EVs) traction battery peak power is analyzed in detail. Aimed at a special “traction” design of versatile battery—HORIZON~ C~2M Battery, the features are introduced. According to the peak power test schedule, the test parameters of HORIZON~ C~2M Battery are calculated and the charging and discharging experiments are carried out. The sustained (30 s) discharge power capability of battery at 2/3 of its open circuit voltage at each of various depths of discharge is determined. The dynamic internal resistance under peak power test is established. Considering the temperature impact during discharging, the peak power capability at each of various depths of discharge is corrected. The correctness of peak power test is validated by combining theory analysis with test results.
基金funded by the“Hot Dry Rock Resources Exploration and Production Demonstration Project”of the China Geological Survey(DD20190131,DD20190135,DD20211336).
文摘Hot dry rock(HDR)is a kind of clean energy with significant potential.Since the 1970s,the United States,Japan,France,Australia,and other countries have attempted to conduct several HDR development research projects to extract thermal energy by breaking through key technologies.However,up to now,the development of HDR is still in the research,development,and demonstration stage.An HDR exploration borehole(with 236℃ at a depth of 3705 m)was drilled into Triassic granite in the Gonghe Basin in northwest China in 2017.Subsequently,China Geological Survey(CGS)launched the HDR resources exploration and production demonstration project in 2019.After three years of efforts,a sequence of significant technological breakthroughs have been made,including the genetic model of deep heat sources,directional drilling and well completion in high-temperature hard rock,large-scale reservoir stimulation,reservoir characterization,and productivity evaluation,reservoir connectivity and flow circulation,efficient thermoelectric conversion,monitoring,and geological risk assessment,etc.Then the whole-process technological system for HDR exploration and production has been preliminarily established accordingly.The first power generation test was completed in November 2021.The results of this project will provide scientific support for HDR development and utilization in the future.
文摘This paper derives the variance of the information content and develops its statistical inference method. We describe the relations between information content and sensitivity, specificity, efficiency, prevalence rate. If sensitivity, specificity and efficiency are fixed, the closer to 0. 5 the prevalence rate is, the more the information content. If prevalence rate and efficiency are fixed, the closer to each other the sensitivity and specificity are, the more the information content. We compare the power of information content method, efficiecy test, Youden's index test and kappa coefficient method. The information content method has higher power than the other methods in most conditions. It is especially sensitive to the difference between two sensitivities. It comes to conclusion that the information content method has more virtues than the other methods mentioned in this paper.
基金Supported by SSFC(04BTJ002),the National Natural Science Foundation of China(10371016) and the Post-Doctorial Grant in Southeast University.
文摘This paper presents an approach for estimating power of the score test, based on an asymptotic approximation to the power of the score test under contiguous alternatives. The method is applied to the problem of power calculations for the score test of heteroscedasticity in European rabbit data (Ratkowsky, 1983). Simulation studies are presented which indicate that the asymptotic approximation to the finite-sample situation is good over a wide range of parameter configurations.
文摘A novel design and implementation of frequency superposition testing power supply for induction motor is proposed. An equivalent power using dynamic space voltage vector synthesis is generated to replace the two separate powers of the traditional method. The principle of frequency superposition testing is firstly introduced, and then the detailed design and implementation of the digital frequency superposition power are given. The simulation of the power supply system shows the promising results. Finally, experimental results validate the feasibility and reliability of the proposed power.
基金This project was supported by National Key R&D Program of China(2017YFB0601903)Beijing Science and Technology Commission Technology Collaborative Innovation Project(201100004520001)the Huaneng Clean Energy Institute(TZ-11-SST01-JY-01).
文摘The use of high-temperature fuel cells as a power technology can improve the efficiency of electricity generation and achieve near-zero emissions of carbon dioxide.This work explores the performance of a 10 kW high-temperature molten carbonate fuel cell.The key materials of a single cell were characterized and analyzed using X-ray diffraction and scanning electron microscopy.The results show that the pore size of the key electrode material is 6.5 lm and the matrix material is a-LiAlO_(2).Experimentally,the open circuit voltage of the single cell was found to be 1.23 V.The current density was greater than 100 mA/cm^(2)at an operating voltage of 0.7 V.The 10 kW fuel cell stack comprised 80 single fuel cells with a total area of 2000 cm^(2)and achieved an open circuit voltage of greater than 85 V.The fuel cell stack power and current density could reach 11.7 kW and 104.5 mA/cm2 at an operating voltage of 56 V.The influence and long-term stable operation of the stack were also analyzed and discussed.The successful operation of a 10 kW high-temperature fuel cell promotes the large-scale use of fuel cells and provides a research basis for future investigations of fuel cell capacity enhancement and distributed generation in China.
文摘In this study, the statistical powers of Kolmogorov-Smimov two-sample (KS-2) and Wald Wolfowitz (WW) tests, non-parametric tests used in testing data from two independent samples, have been compared in terms of fixed skewness and fixed kurtosis by means of Monte Carlo simulation. This comparison has been made when the ratio of variance is two as well as with equal and different sample sizes for large sample volumes. The sample used in the study is: (25, 25), (25, 50), (25, 75), (25, 100), (50, 25), (50, 50), (50, 75), (50, 100), (75, 25), (75, 50), (75, 75), (75, 100), (100, 25), (100, 50), (100, 75), and (100, 100). According to the results of the study, it has been observed that the statistical power of both tests decreases when the coefficient of kurtosis is held fixed and the coefficient of skewness is reduced while it increases when the coefficient of skewness is held fixed and the coefficient of kurtosis is reduced. When the ratio of skewness is reduced in the case of fixed kurtosis, the WW test is stronger in sample volumes (25, 25), (25, 50), (25, 75), (25, 100), (50, 75), and (50, 100) while KS-2 test is stronger in other sample volumes. When the ratio of kurtosis is reduced in the case of fixed skewness, the statistical power of WW test is stronger in volume samples (25, 25), (25, 75), (25, 100), and (75, 25) while KS-2 test is stronger in other sample volumes.
基金Project supported by the National Natural Science Foundation of China(Grant No.60871030)the Shanghai Leading Academic Discipline Project(Grant No.S30108)
文摘As the appearance of local dimming technique, the current existing test methods are not suitable for testing the power consumption of the LCD TVs using the local dimming technique any longer. A test method appropriate to LED backlight LCD TVs using the local dimming technique is proposed in this paper, and then the test software is developed. The results demonstrate that the test software developed can show the real average power consumption of the LCD using local dimming technique, and by normalization the power consumption become comparable for not only local dimming LCD TVs but global dimming LCD TVs. Using the software developed in this paper, the ratio of power saving is clear when an LCD TV using the local dimming technique compared with one without local dimming technique.
文摘In this paper, the roughness of the model function to the basis functions and its properties have been considered. We also consider some conditions to take the limit of the roughness when the observations are i.i.d. An explicit formula to calculate the power of change-point test for the two phases regression through the roughness was obtained.
基金This workis supported in part by JSPS under grant L03540and the National Science Foundation of China under grant60373009
文摘A two stage scan architecture is proposed to do low power and low test application cost scan testing. The first stage includes multiple scan chains, where each scan chain is driven by a primary input. Each scan flip-flop in the multiple scan chains drives a group of scan flip-flops. The scan flip-flop in the multiple scan chain and the scan flip-flop driven by it are assigned the same values for all test vectors. Scan flip-flops in the multiple scan chains and those in the second stage use separate clock signals, but the design for testability technqiue needs only one clock. The proposed scan architecture localizes test power consumption to the multiple scan chains during test application. Test signals assigned to scan flip-fiops in the multiple scan chains are applied to the scan flip-flops in the second stage after the test vector has been applied to the multiple scan chains. This technique can make test power consumption very small.
基金supported by the National Key Research and Development Program of China (No. 2019YFA0405402)。
文摘The insulated gate bipolar transistor(IGBT)module is one of the most age-affected components in the switch power supply, and its reliability prediction is conducive to timely troubleshooting and reduction in safety risks and unnecessary costs. The pulsed current pattern of the accelerator power supply is different from other converter applications;therefore, this study proposed a lifetime estimation method for IGBT modules in pulsed power supplies for accelerator magnets. The proposed methodology was based on junction temperature calculations using square-wave loss discretization and thermal modeling.Comparison results showed that the junction temperature error between the simulation and IR measurements was less than 3%. An AC power cycling test under real pulsed power supply applications was performed via offline wearout monitoring of the tested power IGBT module. After combining the IGBT4 PC curve and fitting the test results,a simple corrected lifetime model was developed to quantitatively evaluate the lifetime of the IGBT module,which can be employed for the accelerator pulsed power supply in engineering. This method can be applied to other IGBT modules and pulsed power supplies.
文摘To study the role of autonomic nervous system in the period of developing syncope induced by head-up tilt test(HUT), we analysed the changes of heart rate power spectral density(HRPSD) in 50 patients with unexplained syncope, including 15 positive patients (Group 1) and 35 negative patients(Group 2), and 15 negative healthy persons(Group 3) in 5 minute periods before and after tilting and 5 minutes before the end of test. HRPSD and their changes in total(T), very low-frequence(VLF), low-frequence(LF), high-frequence(HF) and the ratio of low/high frequence(LF/HF) were similar (P>0.05) 5 minutes before and after tilting among three groups. Five minutes before the end of test, Group 1 had obvious increase of T, VLF, LF and LF/HF while Group 2 and 3 had not such significant changes. There was significant difference(P<0.01) compared Group 1 with Group 2, 3. The results showed that the abnormal regulatory function of autonomic nervous system played an important role in the mechanism of symcope induced by HUT, the positive group had abnormal increase of sympathetic tone and imbalance of sympathetic/parasympathetic neural tone before syncope appeared.
基金partially supported by the National Key Science Program for Global Change Research (Grant no.2010CB950504)the National High-Technology Research & Development Program of China (863 Program,Grant no.2010AA012305)+2 种基金the National Natural Science Foundation of China(Grant no.41076125)the Fundamental Research Funds for the Central Universities (Key Program)the Polar Climate and Environment Key Laboratory
文摘When one applies the wavelet transform to analyze finite-length time series, discontinuities at the data boundaries will distort its wavelet power spectrum in some regions which are defined as a wavelength-dependent cone of influence (COI). In the COI, significance tests are unreliable. At the same time, as many time series are short and noisy, the COI is a serious limitation in wavelet analysis of time series. In this paper, we will give a method to reduce boundary effects and discover significant frequencies in the COI. After that, we will apply our method to analyze Greenland winter temperature and Baltic sea ice. The new method makes use of line removal and odd extension of the time series. This causes the derivative of the series to be continuous (unlike the case for other padding methods). This will give the most reasonable padding methodology if the time series being analyzed has red noise characteristics.
基金Supported by:Scientific Research Program of China General Nuclear Power Corporation(CGN)under Grant No.K-A2017.054Postgraduate Research and Practice Innovation Program of Jiangsu Province under Grant No.KYCX19_0093。
文摘Research to reliably predict the seismic response of nuclear power stations with a pile-raft foundation is needed to meet the high safety requirements of nuclear power stations.In this study,a scaled superstructure with a 4×3 pile-raft foundation,which is constructed in Shanxi kaolin clay,is modelled.Accordingly,the characteristics of seismic response for nuclear power stations with a pile-raft foundation are analyzed using dynamic centrifuge tests.In particular,multiple earthquake motions with different magnitudes and frequency properties are utilized to map the relationship between structural response and properties of earthquake motions.The results show that the seismic response of the soil,raft,and structure are significantly affected by the natural frequency and magnitude of the earthquake motion.The soil surface acceleration is lower than the raft acceleration.The results provide a reliable reference to better understand the seismic response of nuclear power stations.
文摘Draxler and Zessin [1] derived the power function for a class of conditional tests of assumptions of a psychometric model known as the Rasch model and suggested an MCMC approach developed by Verhelst [2] for the numerical approximation of the power of the tests. In this contribution, the precision of the Verhelst approach is investigated and compared with an exact sampling procedure proposed by Miller and Harrison [3] for which the discrete probability distribution to be sampled from is exactly known. Results show no substantial differences between the two numerical procedures and quite accurate power computations. Regarding the question of computing time the Verhelst approach will have to be considered much more efficient.
文摘The authors consider the uniformly most powerful invariant test of the testing problems (Ⅰ) H 0: μ′Σ -1 μ≥CH 1: μ′Σ -1 μ<C and (Ⅱ) H 00 : β′X′Xβσ 2≥CH 11 : β′X′Xβσ 2<C under m dimensional normal population N m(μ, Σ) and normal linear model (Y, Xβ, σ 2) respectively. Furthermore, an application of the uniformly most powerful invariant test is given.
文摘In this paper, the weighted Kolmogrov-Smirnov, Cramer von-Miss and the Anderson Darling test statistics are considered as goodness of fit tests for the generalized Rayleigh interval grouped data. An extensive simulation process is conducted to evaluate their controlling of type 1 error and their power functions. Generally, the weighted Kolmogrov-Smirnov test statistics show a relatively better performance than both, the Cramer von-Miss and the Anderson Darling test statistics. For large sample values, the Anderson Darling test statistics cannot control type 1 error but for relatively small sample values it indicates a better performance than the Cramer von-Miss test statistics. Best selection of the test statistics and highlights for future studies are also explored.