期刊文献+
共找到369篇文章
< 1 2 19 >
每页显示 20 50 100
Experimental demonstration of single-mode fiber coupling using adaptive fiber coupler 被引量:6
1
作者 罗文 耿超 +4 位作者 武云云 谭毅 罗奇 刘红梅 李新阳 《Chinese Physics B》 SCIE EI CAS CSCD 2014年第1期260-265,共6页
Coupling plane wave into a single-mode fiber (SMF) with high and steady coupling efficiency is crucial for fiber- based free-space laser systems, where random angular jitters are the main influencing factors of fibe... Coupling plane wave into a single-mode fiber (SMF) with high and steady coupling efficiency is crucial for fiber- based free-space laser systems, where random angular jitters are the main influencing factors of fiber coupling. In this paper, we verified a new adaptive-optic device named adaptive fiber coupler (AFC) which could compensate angular jitters and improve the SMF coupling efficiency in some degree. Experiments of SMF coupling under the angular jitter situation using AFC have been achieved. Stochastic parallel gradient descent (SPGD) algorithm is employed as the control strategy, of which the iteration rate is 625 Hz. In closed loop, the coupling efficiency keeps above 65% when angular errors are below 80/3tad. The compensation bandwidth is 35 Hz at sine-jitter of 15 ~rad amplitude with average coupling efficiency of above 60%. Also, experiments with simulated turbulence have been studied. The average coupling efficiency increases from 31.97% in open loop to 61.33% in closed loop, and mean square error (MSE) of coupling efficiency drops from 7.43% to 1.75%. 展开更多
关键词 single-mode fiber coupling adaptive fiber coupler adaptive optics free-space optical communication
下载PDF
Wavelength dependent loss of splice of single-mode fibers 被引量:1
2
作者 YANG Bo DUAN Ji-an +1 位作者 XIE Zheng XIAO Hong-feng 《Journal of Central South University》 SCIE EI CAS 2013年第7期1832-1837,共6页
After reviewing three different definitions of mode field diameter of single-mode fibers, coupled efficiency calculation methods associated with lateral offset, longitude separation and wavelength, the effects produce... After reviewing three different definitions of mode field diameter of single-mode fibers, coupled efficiency calculation methods associated with lateral offset, longitude separation and wavelength, the effects produced by them, and the influences of splicing defects were discussed in detail. The regularities of the effects were studied according to the first order derivation of couple efficiency formula, and a simplified formula for couple efficiency calculation was presented under the circumstance of slight misalignment, with respect to wavelength, 2, and in a good agreement with the theoretical model. The simplified formula provides a new but simple approach to evaluate wavelength dependent couple efficiency of single-mode fibers. Theoretical analyses and numerical calculations show that, when those defects exist, the wavelength produces additional effects on the couple loss that growth of wavelength causes an increase on the couple efficiency for the lateral offset or longitude separation whereas lessens the couple efficiency due to angular misalignment or mode fields mismatching, and that the wavelength degrades the couple efficiency distinctly when λ≥2.5 μm whereas it distorts the couple slightly in range of λ≤2λ≤2 μm. 展开更多
关键词 wavelength dependent loss couple efficiency single-mode fiber cut-offwavelength
下载PDF
Single-mode antiresonant terahertz fiber based on mode coupling between core and cladding
3
作者 Shuai Sun Wei Shi +7 位作者 Quan Sheng Shijie Fu Zhongbao Yan Shuai Zhang Junxiang Zhang Chaodu Shi Guizhong Zhang Jianquan Yao 《Chinese Physics B》 SCIE EI CAS CSCD 2021年第12期430-436,共7页
Based on the index-induced mode coupling between the higher-order mode in core and the fundamental mode in cladding tubes,the single-mode operation can be realized in any antiresonant fibers(ARFs)when satisfying that ... Based on the index-induced mode coupling between the higher-order mode in core and the fundamental mode in cladding tubes,the single-mode operation can be realized in any antiresonant fibers(ARFs)when satisfying that the area ratio of cladding tube and core is about 0.46:1,and this area ratio also should be modified according to the shape and the number of cladding tubes.In the ARF with nodal core boundary,the mode in core also can couple with the mode in the wall of core boundary,which can further enhance the suppression of high-order mode.Accordingly,an ARF with conjoint semi-elliptical cladding tubes realizes a loss of higher-order mode larger than 30 dB/m;simultaneously,a loss of fundamental mode loss less than 0.4 dB/m. 展开更多
关键词 TERAHERTZ mode coupling single-mode fiber
下载PDF
FAST EVALUATION OF THE CHARACTERISTICS OF SINGLE-MODE OPTICAL FIBERS
4
作者 杨祥林 《Journal of Electronics(China)》 1989年第3期263-271,共9页
This paper describes a method for fast engineering evaluation of the transmission characteristicsof single-mode optical fibers.A versatile microcomputer program is presented which can be utilized to ana-lyze mode fiel... This paper describes a method for fast engineering evaluation of the transmission characteristicsof single-mode optical fibers.A versatile microcomputer program is presented which can be utilized to ana-lyze mode field characteristics of single-mode fibers with arbitrary refractive index profiles.Our computationshows that the mathematical algorithm and the corresponding programs developeod in this paper are rela-tively simple and accurate enough for the engineenring design of single-mode fibers for optical communica-tion systems. 展开更多
关键词 OPTICAL fiber COMMUNICATION single-mode OPTICAL fiber FAST EVALUATION
下载PDF
Single-polarization single-mode hollow-core negative curvature fiber with nested U-type cladding elements
5
作者 Qi-Wei Wang Shi Qiu +9 位作者 Jin-Hui Yuan Gui-Yao Zhou Chang-Ming Xia Yu-Wei Qu Xian Zhou Bin-Bin Yan Qiang Wu Kui-Ru Wang Xin-Zhu Sang Chong-Xiu Yu 《Chinese Physics B》 SCIE EI CAS CSCD 2022年第6期422-428,共7页
Hollow-core negative curvature fibers(HC-NCFs)have become one of the research hotspots in the field of optical fiber because of their potential applications in the data and energy transmissions.In this work,a new kind... Hollow-core negative curvature fibers(HC-NCFs)have become one of the research hotspots in the field of optical fiber because of their potential applications in the data and energy transmissions.In this work,a new kind of single-polarization single-mode HC-NCF with nested U-type cladding elements is proposed.To achieve the single-polarization single-mode transmission,we use two different silica tubes in thickness,which satisfy the resonance and anti-resonance conditions on the U-type cladding elements and the cladding tubes,respectively.Besides,the elliptical elements are introduced to achieve good single-mode performance.By studying the influences of the structure parameters on the propagation characteristics,the optimized structure parameters are obtained.The simulation results show that when the wavelength is fixed at 1550 nm,the single-polarization single-mode transmission is achieved,with the polarization extinction ratio of 25749 and minimum high-order mode extinction ratio of 174.Furthermore,the confinement loss is only 0.0015 dB/m. 展开更多
关键词 hollow-core negative curvature fiber single-polarization single-mode finite element method
下载PDF
Frequency-stabilized Yb:fiber comb with a tapered single-mode fiber
6
作者 谢阳 韩海年 +5 位作者 张龙 于子蛟 朱政 侯磊 庞利辉 魏志义 《Chinese Physics B》 SCIE EI CAS CSCD 2016年第4期166-170,共5页
We demonstrate a stable Yb:fiber frequency comb with supercontinuum generation by using a specially designed tapered single-mode fiber, in which a spectrum spanning from 500 nm to 1500 nm is produced. The carrier-env... We demonstrate a stable Yb:fiber frequency comb with supercontinuum generation by using a specially designed tapered single-mode fiber, in which a spectrum spanning from 500 nm to 1500 nm is produced. The carrier-envelope offset signal of the Yb:fiber comb is measured with a signal-to-noise ratio of more than 40 dB and a linewidth narrower than 120 kHz. The repetition rate and carrier-envelope offset signals are simultaneously phase locked to a microwave reference frequency. 展开更多
关键词 tapered single-mode fiber supercontinuum generation optical frequency comb
下载PDF
A tunable comb filter using single-mode/multimode/polarization-maintaining-fiber-based Sagnac fiber loop
7
作者 阮隽 张伟刚 +2 位作者 张昊 耿鹏程 白志勇 《Chinese Physics B》 SCIE EI CAS CSCD 2013年第6期431-434,共4页
A novel tunable comb filter composed of a single-mode/multimode/polarization-maintaining-fiber-based Sagnac fiber loop is proposed and experimentally demonstrated. The filter tunability is achieved by rotating the pol... A novel tunable comb filter composed of a single-mode/multimode/polarization-maintaining-fiber-based Sagnac fiber loop is proposed and experimentally demonstrated. The filter tunability is achieved by rotating the polarization controller. The spectral shift is dependent on rotation direction and the position of the polarization controller. In addition, the adjustable range achieved by rotating the half-wave-plate polarization controller is twice higher than that of the quarter-wave-plate one. 展开更多
关键词 Sagnac fiber loop filter single-mode/multimode/polarization-maintaining-fiber half-wave plate quarter-wave plate
下载PDF
Chinese Standards an Refractories Refractory-Ceramic Fiber and the Products
8
作者 Liu Chunhong Wang Jing +1 位作者 Yu Lingyan Peng Xigao 《China's Refractories》 CAS 2014年第1期43-51,共9页
1 Scope This standard specifies the terms, definitions, classifications, brands, technical requirements, test methods, quality appraisal procedure, packing, marking, transportation, storage and quality certificate of ... 1 Scope This standard specifies the terms, definitions, classifications, brands, technical requirements, test methods, quality appraisal procedure, packing, marking, transportation, storage and quality certificate of ceramic fiher and the products. 展开更多
关键词 Chinese standards an Refractories Refractory-Ceramic fiber and the Products LENGTH
下载PDF
Construction of Fiber Standardization Demonstration Area to Be Started
9
《China Standardization》 2007年第4期37-,共1页
  The China Fiber Inspection Bureau has announced that in 2007 it will reinforce the implementation of science, technologies, and standardization, and begin a project of constructing a fiber standardization demonstr...   The China Fiber Inspection Bureau has announced that in 2007 it will reinforce the implementation of science, technologies, and standardization, and begin a project of constructing a fiber standardization demonstration area.…… 展开更多
关键词 Construction of fiber standardization Demonstration Area to Be Started BE
下载PDF
标准助力造纸行业可持续发展——《再生纸浆》国家标准解读 被引量:1
10
作者 蔡慧 沙九龙 +4 位作者 唐胜德 邱文伦 张蒙 李文正 刘俊杰 《中国造纸》 CAS 北大核心 2024年第1期1-6,共6页
GB/T 43393—2023《再生纸浆》是在符合相关法律法规、满足环保要求条件下为助力我国造纸行业健康可持续发展而制定的产品(技术)标准。本文介绍了GB/T 43393—2023《再生纸浆》的主要内容,包括再生纸浆的界定、适用范围、分类、技术要... GB/T 43393—2023《再生纸浆》是在符合相关法律法规、满足环保要求条件下为助力我国造纸行业健康可持续发展而制定的产品(技术)标准。本文介绍了GB/T 43393—2023《再生纸浆》的主要内容,包括再生纸浆的界定、适用范围、分类、技术要求和试验方法要点等;对标准中规定的检验项目包括放射性污染、危险废物、感官性状、重金属、浆板耐破指数、Cobb值(Cobb60)、未碎解的纤维组分含量、夹杂物含量、粗渣率及手抄片机械强度等技术指标进行了解读;并分析了其与GB/T 24320—2021《回用纤维浆》的主要差异。 展开更多
关键词 制浆造纸行业 再生纸浆 回用纤维浆 标准解读
下载PDF
FZ/T 97042—2023《经编展纤整经机》标准解读
11
作者 邵洪 陈南梁 《天津纺织科技》 2024年第4期39-41,共3页
阐述FZ/T 97042—2023《经编展纤整经机》标准的制定过程,包括多方参与和反复论证。分析其适用范畴,涵盖不同规模和类型的生产场景。探讨整经机的形式和主要参数,为设备选型提供了依据。研究设备控制系统的要求,以保障整经过程的稳定性... 阐述FZ/T 97042—2023《经编展纤整经机》标准的制定过程,包括多方参与和反复论证。分析其适用范畴,涵盖不同规模和类型的生产场景。探讨整经机的形式和主要参数,为设备选型提供了依据。研究设备控制系统的要求,以保障整经过程的稳定性和高效性。强调整经质量的严格要求,确保产品符合高品质标准。最后,深入剖析该标准发布对行业发展的意义,为高性能纤维经编织造行业的健康发展提供了有力支撑。 展开更多
关键词 标准解读 高性能纤维 经编 整经机
下载PDF
石榴皮植物染料及其染色羊绒纤维的鉴别
12
作者 桂祖文 何剑锋 +4 位作者 徐昊宁 陈胜航 余志成 侯战昌 陈超 《现代纺织技术》 北大核心 2024年第6期18-27,共10页
为完善植物染标准体系,建立石榴皮植物染料的鉴别方法与标准,通过紫外分光光度计对石榴皮植物染料的标志物进行分析,并采用液质联用仪对石榴皮植物染料及其染色羊绒纤维上萃取的染料进行鉴别。结果表明:安石榴苷与鞣花酸可以作为鉴别石... 为完善植物染标准体系,建立石榴皮植物染料的鉴别方法与标准,通过紫外分光光度计对石榴皮植物染料的标志物进行分析,并采用液质联用仪对石榴皮植物染料及其染色羊绒纤维上萃取的染料进行鉴别。结果表明:安石榴苷与鞣花酸可以作为鉴别石榴皮植物染料及其染色羊绒纤维的标志物。石榴皮植物染料的质谱中检测到准分子离子峰m/z 300.9862,保留时间为1.02 min;直接染色和硫酸亚铁后媒染羊绒纤维萃取液的质谱中检测到准分子离子峰m/z 300.9896和300.9868,保留时间分别为1.02 min和1.04 min。两者均与鞣花酸标准品1.02 min的出峰时间相近,在标准允许的±2.5%偏差范围内,结合其紫外可见光吸收光谱中只含有277 nm处的没食子酸与255、357 nm处的鞣花酸特征峰,可确定该染料及其染色羊绒纤维均为纯石榴皮植物染料。 展开更多
关键词 石榴皮 植物染料 羊绒纤维 安石榴苷 鞣花酸 染料鉴别 植物染标准体系
下载PDF
板材含水率对甲醛释放量相对标准不确定度的影响 被引量:1
13
作者 胡斌 金龙 邵其锋 《山西化工》 CAS 2024年第4期84-85,99,共3页
以市售中度纤维板材为研究对象,讨论了板材含水率对甲醛释放量检测结果的影响,并且通过实验数据计算甲醛释放量的相对标准不确定度来检验数据的稳定性。结果表明,随着板材含水率增大,甲醛释放量呈现上升趋势,而相对标准不确定度则先增... 以市售中度纤维板材为研究对象,讨论了板材含水率对甲醛释放量检测结果的影响,并且通过实验数据计算甲醛释放量的相对标准不确定度来检验数据的稳定性。结果表明,随着板材含水率增大,甲醛释放量呈现上升趋势,而相对标准不确定度则先增加后减小。因此,板材含水率对甲醛释放量有较大影响,检测时应将板材含水率问题纳入甲醛释放量结果中。 展开更多
关键词 中度纤维板材 甲醛释放量 相对标准不确定 含水率
下载PDF
GB/T 8878—2023《针织内衣》标准修订研读
14
作者 郭鑫 刘凤荣 +1 位作者 张克甲 苏宇 《针织工业》 北大核心 2024年第2期67-71,共5页
GB/T 8878—2023《针织内衣》国家标准是以GB/T 8878—2014《棉针织内衣》、FZ/T 73024—2014《化纤针织内衣》为基准整合而成,属于行业广泛使用的产品标准之一。整合后的GB/T 8878—2023标准拓展了适用范围,考核要求及考核项目根据近... GB/T 8878—2023《针织内衣》国家标准是以GB/T 8878—2014《棉针织内衣》、FZ/T 73024—2014《化纤针织内衣》为基准整合而成,属于行业广泛使用的产品标准之一。整合后的GB/T 8878—2023标准拓展了适用范围,考核要求及考核项目根据近年来针织内衣产品的变化要求,在保留原标准要求基础上增加了相关的消费者体验项目,简化了标准理解和操作,也避免了原来两项标准在使用衔接上的问题。文章从标准适用范围、号型规定、内在质量要求、外观质量要求、试验方法等方面,详细解读GB/T 8878—2023标准的修订情况及内容变化,以更好地满足行业、企业、市场、消费者使用要求。 展开更多
关键词 针织内衣 国家标准 棉针织内衣 化纤针织内衣
下载PDF
基于布里渊散射光时域分析的形状传感研究
15
作者 刘紫娟 武佳琪 +3 位作者 张立欣 李永倩 王健健 王宽 《光子学报》 EI CAS CSCD 北大核心 2024年第4期95-103,共9页
搭建了基于布里渊散射光时域分析技术的应变测量系统,采用七芯光纤作为分布式形状传感器,通过测量七个纤芯在弯曲时的布里渊散射谱,验证了七芯光纤偏芯之间每两个对称芯所受应变值相等且互为相反数的特点。对比七芯光纤中间芯与偏芯的... 搭建了基于布里渊散射光时域分析技术的应变测量系统,采用七芯光纤作为分布式形状传感器,通过测量七个纤芯在弯曲时的布里渊散射谱,验证了七芯光纤偏芯之间每两个对称芯所受应变值相等且互为相反数的特点。对比七芯光纤中间芯与偏芯的布里渊增益谱,测得偏芯在不同弯曲半径下的布里渊频移变化,得到偏芯在每个位置受到的应变值。利用并行传输标架形状重构算法对七芯光纤在曲率直径为0.112 m和0.052 m时的形状进行了重构,当曲率直径为0.112 m时,曲率重构误差为0.375%。 展开更多
关键词 形状传感 布里渊散射光时域分析 七芯光纤 并行传输标架
下载PDF
兰精纤维自动测油仪标准曲线绘制方法的改进
16
作者 金俊杰 孙守秀 +2 位作者 雷玉娟 宋章康 赵琪琪 《合成纤维》 CAS 2024年第4期48-50,共3页
对照兰精ALFA 400纤维自动测油仪产品说明书绘制的含油标准曲线,在纤维含油率检测中发现存在以下问题:曲线的准确度较低,曲线的相关性系数<0.999,无法满足公司检测要求。通过对检测方法的改进,采用油剂制作标准溶液代替纤维样品来制... 对照兰精ALFA 400纤维自动测油仪产品说明书绘制的含油标准曲线,在纤维含油率检测中发现存在以下问题:曲线的准确度较低,曲线的相关性系数<0.999,无法满足公司检测要求。通过对检测方法的改进,采用油剂制作标准溶液代替纤维样品来制作标准曲线,曲线的相关性系数达到了要求,准确度得到了提高。 展开更多
关键词 纤维含油率 兰精自动测油仪 标准曲线 油剂
下载PDF
某污水处理厂提标改造工程设计探析
17
作者 宋如 《江西建材》 2024年第3期277-279,282,共4页
文中以某污水处理厂为例,结合现状处理工艺及进出水水质分析,进行深度处理工艺比较,选择合适的工艺,计算相关构筑物尺寸,并分析竣工调试阶段存在的问题,该污水处理厂出水水质从GB 18918—2002《城镇污水处理厂污染物排放标准》规定的一... 文中以某污水处理厂为例,结合现状处理工艺及进出水水质分析,进行深度处理工艺比较,选择合适的工艺,计算相关构筑物尺寸,并分析竣工调试阶段存在的问题,该污水处理厂出水水质从GB 18918—2002《城镇污水处理厂污染物排放标准》规定的一级B标准提升至一级A标准。 展开更多
关键词 污水处理厂 提标改造 高效沉淀池 纤维转盘滤池
下载PDF
动物毛纤维的剥麟工艺及鉴别
18
作者 王海娟 朱风亮 孙欣 《天津纺织科技》 2024年第1期35-39,共5页
动物毛纤维通过剥麟方法,可以改善织物的手感、光泽、染色性能以及防起球性能等,经过剥麟后的毛纤维在纤维鉴别上变得难上加难。通过选用高锰酸钾-二氧化硫脲氧化还原法对7种常见毛纤维的标准标样进行剥麟处理,得到一组标准标样剥麟后... 动物毛纤维通过剥麟方法,可以改善织物的手感、光泽、染色性能以及防起球性能等,经过剥麟后的毛纤维在纤维鉴别上变得难上加难。通过选用高锰酸钾-二氧化硫脲氧化还原法对7种常见毛纤维的标准标样进行剥麟处理,得到一组标准标样剥麟后纵截面形态的标准样照。用显微镜观察未知剥麟毛纤维的纵截面形态,通过对照标准样照的纵截面形态来鉴别未知剥麟毛纤维的种类。研究表明,高锰酸钾浓度为0.375%,温度为60℃,振荡时间为40min条件下剥麟效果最好,纵截面形态最佳。 展开更多
关键词 毛纤维 剥麟 纵截面 标准样照 浓度
下载PDF
玻璃钢夹砂管道工程监理的技术标准与效能评估研究
19
作者 李舜 《水利科技与经济》 2024年第9期147-152,共6页
针对玻璃钢夹砂管道在实际工程应用中对监理技术标准与效能评估的精确化需求,研究提出基于数据驱动与数值模拟的分析方法。结果显示,位于南送自流段(K0+120~K0+135)与南送自流段(K0+200~K+215)的壁厚分别为42.27和43.92mm、超声波检测... 针对玻璃钢夹砂管道在实际工程应用中对监理技术标准与效能评估的精确化需求,研究提出基于数据驱动与数值模拟的分析方法。结果显示,位于南送自流段(K0+120~K0+135)与南送自流段(K0+200~K+215)的壁厚分别为42.27和43.92mm、超声波检测强度分别为155和160MPa,表明在特定的工程段落存在强度落差。研究结果不仅可以优化工程质量,还能够指导监理标准的制定,适用于复合材料管道的施工,可为工程监理领域提供实践经验。 展开更多
关键词 玻璃钢夹砂管道 工程监理 技术标准 效能评估 系统维护
下载PDF
Self-starting all-fiber PM Er:laser mode locked by a biased nonlinear amplifying loop mirror 被引量:2
20
作者 Ke Yin Yi-Ming Li +2 位作者 Yan-Bin Wang Xin Zheng Tian Jiang 《Chinese Physics B》 SCIE EI CAS CSCD 2019年第12期160-164,共5页
A compact all-fiber polarization-maintaining Er:laser using a nonlinear amplifying loop mirror is reported. Fundamental single-pulse mode-locking operation can always self start, with a cavity round-trip decreased fro... A compact all-fiber polarization-maintaining Er:laser using a nonlinear amplifying loop mirror is reported. Fundamental single-pulse mode-locking operation can always self start, with a cavity round-trip decreased from ~ 4.7 m to~ 1.7 m. When the pulse repetition rate is 121.0328 MHz, output pulse is measured to have a center wavelength/3-d B spectral bandwidth/radio frequency signal to noise ratio(SNR)/pulse width of 1571.65 nm/18.70 nm/80 d B/477 fs, respectively. Besides, three states including the exponential growth, damping state, and steady state are investigated through the build-up process both experimentally and numerically. Excellent stability of this compact Er:laser is further evaluated,demonstrating that it can be an easy-fabrication maintenance-free ultrafast candidate for the scientific area of this kind. 展开更多
关键词 ultrafast fiber laser single-mode polarization-maintaining Er:laser
下载PDF
上一页 1 2 19 下一页 到第
使用帮助 返回顶部