The objective of this work was to study the use of standard equipment in amplitude and frequency tests of dental scaler tip according to ISO 18397.Four types of standard equipment:a laser displacement sensor,a microsc...The objective of this work was to study the use of standard equipment in amplitude and frequency tests of dental scaler tip according to ISO 18397.Four types of standard equipment:a laser displacement sensor,a microscope,a tachometer,and an ultrasonic frequency meter,were experimentally investigated to test a tip.The standard laser displacement sensor and the standard microscope were used to test the unloaded amplitude of the scaler tip.It was found that two types of standard equipment were able to measure the unloaded amplitude of the tip.The standard microscope was also employed for the loaded amplitude test.This test was performed by pressing the scaler tip with a load of 1 N,which was measured by a load cell set.The peak-to-peak amplitude found from the test was 116.7 m.The frequency test of the scaler tip was conducted using the standard laser displacement sensor,the tachometer and the ultrasonic frequency meter.All three types of standard equipment were found to be able to test the frequency of the tip without cooling liquid.Nevertheless,only the standard tachometer was capable of measuring the frequency of the tip with cooling liquid applied.展开更多
I am working in Japan electrical safety & environment technology laboratory,which is called JET for short. In JET, we are carrying out the safety test of electrical equipmentaccording to Japanese domestic stan...I am working in Japan electrical safety & environment technology laboratory,which is called JET for short. In JET, we are carrying out the safety test of electrical equipmentaccording to Japanese domestic standards or IEC standards. And in my section, our stuff is draftingsome national safety standards harmonized with IEC in cooperation with the government. The standardsare applied for the mandatory regulation and other schemes.展开更多
SAC organized a seminar on equipment manufacturing standardization for the standardization officers in countries along the Belt and Road from June9 to 29 to further facilitate the connectivity of policies,rules and st...SAC organized a seminar on equipment manufacturing standardization for the standardization officers in countries along the Belt and Road from June9 to 29 to further facilitate the connectivity of policies,rules and standards and better serve the national Belt and Road Initiative.展开更多
The purchasement and development as well as the benefit of utilization for the large equipment in universities of China are analyzed in this paper, the paper in dicates that in utilization of large equipment the contr...The purchasement and development as well as the benefit of utilization for the large equipment in universities of China are analyzed in this paper, the paper in dicates that in utilization of large equipment the contradictions such as urgency and necessity for the purchasement and development of large equipment and serious waste in resources since inadequacy of annual utilization rate of large equipment are existed, it also raises that the key step of giving full play to the benefit of large equipment is to strengthen management and development after the equipment are purchased, the paper regards through stressing standardized management and maintenance、opening the laboratory、improving the functions of equipment、renovating technology、fully examining and scientifically deciding before purchasement, the investment benefit for the large equipment can be raised effectively.展开更多
文摘The objective of this work was to study the use of standard equipment in amplitude and frequency tests of dental scaler tip according to ISO 18397.Four types of standard equipment:a laser displacement sensor,a microscope,a tachometer,and an ultrasonic frequency meter,were experimentally investigated to test a tip.The standard laser displacement sensor and the standard microscope were used to test the unloaded amplitude of the scaler tip.It was found that two types of standard equipment were able to measure the unloaded amplitude of the tip.The standard microscope was also employed for the loaded amplitude test.This test was performed by pressing the scaler tip with a load of 1 N,which was measured by a load cell set.The peak-to-peak amplitude found from the test was 116.7 m.The frequency test of the scaler tip was conducted using the standard laser displacement sensor,the tachometer and the ultrasonic frequency meter.All three types of standard equipment were found to be able to test the frequency of the tip without cooling liquid.Nevertheless,only the standard tachometer was capable of measuring the frequency of the tip with cooling liquid applied.
文摘I am working in Japan electrical safety & environment technology laboratory,which is called JET for short. In JET, we are carrying out the safety test of electrical equipmentaccording to Japanese domestic standards or IEC standards. And in my section, our stuff is draftingsome national safety standards harmonized with IEC in cooperation with the government. The standardsare applied for the mandatory regulation and other schemes.
文摘SAC organized a seminar on equipment manufacturing standardization for the standardization officers in countries along the Belt and Road from June9 to 29 to further facilitate the connectivity of policies,rules and standards and better serve the national Belt and Road Initiative.
文摘The purchasement and development as well as the benefit of utilization for the large equipment in universities of China are analyzed in this paper, the paper in dicates that in utilization of large equipment the contradictions such as urgency and necessity for the purchasement and development of large equipment and serious waste in resources since inadequacy of annual utilization rate of large equipment are existed, it also raises that the key step of giving full play to the benefit of large equipment is to strengthen management and development after the equipment are purchased, the paper regards through stressing standardized management and maintenance、opening the laboratory、improving the functions of equipment、renovating technology、fully examining and scientifically deciding before purchasement, the investment benefit for the large equipment can be raised effectively.
