Food safety problems caused by excessive nitrite addition have been frequently reported and the detection of nitrite in food is particularly important. The standing time during the pretreatment of primary sample has a...Food safety problems caused by excessive nitrite addition have been frequently reported and the detection of nitrite in food is particularly important. The standing time during the pretreatment of primary sample has a great influence on the concentration of nitrite tested by spectrophotometric method. In this context, three kinds of food samples are prepared, including canned mustard, canned fish and home-made pickled water. A series of standing times are placed during the sample pretreatments and the corresponding nitrite contents in these samples are detected by spectrophotometric method based on N-ethylenediamine dihydrochloride. This study aims to find out a reasonable standing time during the pretreatment of food sample, providing influence factor for precise detection of nitrite.展开更多
In this paper, we study the existence of standing waves for the nonlinear Schrödinger equation with combined power-type nonlinearities and a partial harmonic potential. In the L<sup>2</sup>-supercriti...In this paper, we study the existence of standing waves for the nonlinear Schrödinger equation with combined power-type nonlinearities and a partial harmonic potential. In the L<sup>2</sup>-supercritical case, we obtain the existence and stability of standing waves. Our results are complements to the results of Carles and Il’yasov’s artical, where orbital stability of standing waves have been studied for the 2D Schrödinger equation with combined nonlinearities and harmonic potential.展开更多
Twenty-seven specimens were tested to investigate the uniaxial compression behaviour of an innovative standing support for underground space applications.The innovative standing support consisted of an external fibre ...Twenty-seven specimens were tested to investigate the uniaxial compression behaviour of an innovative standing support for underground space applications.The innovative standing support consisted of an external fibre reinforced polymer(FRP)jacket and the infill column made of cementitious grout,tailings and coal wash rejects.Effects of the FRP layers number and water to the cementitious grout(w/g)ratio were evaluated.Test results indicated that lower w/g ratios produced stronger infill columns.With FRP confinement,the standing support demonstrated strain-hardening loading characteristics with a significant improvement in both strength and ductility.The highest strength and strain of the specimens achieved was 58.4 MPa and 11.8%respectively.Compared with the unconfined specimens,the confinement with four FRP layers increased the specimen strength and associated strain up to 3.6 and 27.0 times respectively.A correlation between the compressive strength of the infill material and the ultrasonic pulse velocity was also investigated.Furthermore,a simple design-oriented model was proposed to predict the peak strength and the corresponding strain of the innovative standing support.展开更多
The streamer that is driven by the specific pulse DC discharge parameters can stably form a three-dimensional helical plasma channel in a long dielectric tube in the low-temperature plasma experiment,in cases when the...The streamer that is driven by the specific pulse DC discharge parameters can stably form a three-dimensional helical plasma channel in a long dielectric tube in the low-temperature plasma experiment,in cases when there were neither external background magnetic field or other factors that destroyed the poloidal symmetry of the tube.The formation mechanism and chirality of helical streamers are discussed according to the surface electromagnetic standing wave theory.The shape of the helical streamers and the characteristics of helical branches are quantitatively analyzed to further expand the application of plasma and streamer theory in the helix problem and chiral catalytic synthesis.展开更多
正At the invitation of the Ministry of Foreign Affairs of Israel, Grand National Assembly of Turkey (TBMM) and Delhi Study Group of India, a delegation of the Chinese Association for International Understanding (CAFIU...正At the invitation of the Ministry of Foreign Affairs of Israel, Grand National Assembly of Turkey (TBMM) and Delhi Study Group of India, a delegation of the Chinese Association for International Understanding (CAFIU) headed展开更多
正The Understanding and Cooperation Dialogue, Sponsored by the Chinese Association for International Understanding (CAFIU) and the China Foundation for Peace and Development (CFPD), and Co-organized by the Chinese Peo...正The Understanding and Cooperation Dialogue, Sponsored by the Chinese Association for International Understanding (CAFIU) and the China Foundation for Peace and Development (CFPD), and Co-organized by the Chinese People' s Association for Peace and展开更多
A contact model for describing the contact mechanics between the stator and slider of the standing wave linear ultrasonic motor was presented. The proposed model starts from the assumption that the vibration character...A contact model for describing the contact mechanics between the stator and slider of the standing wave linear ultrasonic motor was presented. The proposed model starts from the assumption that the vibration characteristics of the stator is not affected by the contact process. A modified friction models was used to analyze the contact problems. Firstly, the dynamic normal contact force, interface friction force, and steady-state characteristics were analyzed. Secondly, the influences of the contact layer material, the dynamic characteristics of the stator, and the pre-load on motor performance were simulated. Finally, to validate the contact model, a linear ultrasonic motor based on in-plane modes was used as an example. The corresponding results show that a set of simulation of motor performances based on the proposed contact mechanism is in good agreement with experimental results. This model is helpful to understanding the operation principle of the standing wave linear motor and thus contributes to the design of these types of motor.展开更多
Based on the theoretical high-order model with a dissipative term for non-linear and dispersive wave in water of varying depth, a 3-D mathematical model of non-linear wave propagation is presented. The model, which ca...Based on the theoretical high-order model with a dissipative term for non-linear and dispersive wave in water of varying depth, a 3-D mathematical model of non-linear wave propagation is presented. The model, which can be used to calculate the wave particle velocity and wave pressure, is suitable to the complicated topography whose relative depth (d/lambda(0), ratio of the characteristic water depth to the characteristic wavelength in deep-water) is equal to or smaller than one. The governing equations are discretized with the improved 2-D Crank-Nicolson method in which the first-order derivatives are corrected by Taylor series expansion, And the general boundary conditions with an arbitrary reflection coefficient and phase shift are adopted in the model. The surface elevation, horizontal and vertical velocity components and wave pressure of standing waves are numerically calculated. The results show that the numerical model can effectively simulate the complicated standing waves, and the general boundary conditions possess good adaptability.展开更多
In this paper bottom scours in front of vertical breakwaters by standing waves are systematically investigated, the scouring patterns, criterion for differentiating the scouring patterns and scouring mechanism are dis...In this paper bottom scours in front of vertical breakwaters by standing waves are systematically investigated, the scouring patterns, criterion for differentiating the scouring patterns and scouring mechanism are discussed ; a formula of maximum depth of scouring trough considering sediment size is given; and influence of mound foundation on bottom scours is investigated.展开更多
The physical design and cooling test of a C-band 2MeV standing wave (SW) accelerating tube are described in this paper. The designed accelerating structure consists of 3-cell buncher and 4-cell accelerating section ...The physical design and cooling test of a C-band 2MeV standing wave (SW) accelerating tube are described in this paper. The designed accelerating structure consists of 3-cell buncher and 4-cell accelerating section with a total length of about 163mm, excited with 1MW magnetron. Dynamic simulation presents that about 150mA beam pulse current and 30% capture efficiency can be achieved. By means of nonlinear Gauss fit on electron transverse distribution, the diameter of beam spot FWHM (full width at half maximum of density distribution) is about 0.55mm. Cooling test results of the accelerating tube show that frequencies of cavities are tuned to 5527MHz and the field distribution of bunching section is about 3:9:10.展开更多
Helicon wave plasma sources have the well-known advantages of high efficiency and high plasma density, with broad applications in many areas. The crucial mechanism lies with mode transitions, which has been an outstan...Helicon wave plasma sources have the well-known advantages of high efficiency and high plasma density, with broad applications in many areas. The crucial mechanism lies with mode transitions, which has been an outstanding issue for years. We have built a fluid simulation model and further developed the Peking University Helicon Discharge code. The mode transitions, also known as density jumps, of a single-loop antenna discharge are reproduced in simulations for the first time. It is found that large-amplitude standing helicon waves(SHWs) are responsible for the mode transitions, similar to those of a resonant cavity for laser generation.This paper intends to give a complete and quantitative SHW resonance theory to explain the relationship of the mode transitions and the SHWs. The SHW resonance theory reasonably explains several key questions in helicon plasmas, such as mode transition and efficient power absorption, and helps to improve future plasma generation methods.展开更多
For ion cyclotron resonance heating, the current on the antenna surface exists in a form of standing wave, and the phase of the poloidal current standing wave affects significantly on the performance of the coupling. ...For ion cyclotron resonance heating, the current on the antenna surface exists in a form of standing wave, and the phase of the poloidal current standing wave affects significantly on the performance of the coupling. In this paper, a coupling calculation is carried out based on a practical model for the loop antenna. The ion cyclotron wave coupling performance depends greatly on the antenna current propagation constant and the phase of standing wave. For a small antenna-current-propagation constant, the antenna coupling performance is more sensitive to a π/2 change in the phase of standing wave.展开更多
Background: Although the standing long jump (SLJ) is a popular physical fitness assessment, it lacks an updated criterion-reference standard. This study generated the first normative SLJ test data for Chinese aged 8 -...Background: Although the standing long jump (SLJ) is a popular physical fitness assessment, it lacks an updated criterion-reference standard. This study generated the first normative SLJ test data for Chinese aged 8 - 18. Methods: From September 2005 to December 2011, comprehensive physical fitness assessments were conducted on 12,712 school students. The SLJ performances were significantly different between boys and girls (all age groups, p < 0.01). Results: The boys performed better than the girls in each age group. The mean difference increased as the age increased, depicting a prominent variance in muscular strength between boys and girls at age 12, and the variances became larger at age 18. Girls in the 70th percenttile performed similarly to boys performing in the 10th percentile. The onset of muscle strength for boys found in this study corresponded to the onset age of testosterone maturation of Chinese boys investigated in previous studies. Linear regression found age and BMI predicting SLJ significantly for boys and girls, explaining better SLJ results in older boy and the effect of their heavy body size. Conclusions: This study indicated a muscular strength difference between genders during growth and added supporting evidence to the hormonal influence of muscle growth during puberty.展开更多
This paper presents the development of an innovative standing support for underground mines.The main feature of this standing support is its exterior container,a combination of polyvinyl chloride(PVC)with large ruptur...This paper presents the development of an innovative standing support for underground mines.The main feature of this standing support is its exterior container,a combination of polyvinyl chloride(PVC)with large rupture strain and fibre-reinforced polymer(FRP)with high strength-to-weight ratio.To demonstrate the advantages of this cementitious grout filled PVC-FRP tubular(PFT)standing support,a series of compression tests were conducted.Test variables included the strength of cementitious grout infill material and the thickness of FRP jacket.Compression tests were also conducted on cementitious grout-filled PVC tubular(PT)support and cementitious grout-filled FRP tubular(FT)support.These tests showed that PFT support presents a typical strain-hardening behaviour together with an outstanding axial deformation ability(>20%of the overall height of the support).In addition,the maximum compressive strength of PFT support is much higher than that of the corresponding PT support and FT support.Furthermore,using thicker FRP jacket or high strength cementitious grout material can enhance the load carrying capacity of PFT support.These comparative results indicated that the high performance of PFT support is mainly attributed to the combination of confining constituents(i.e.PVC and FRP)and infill material.展开更多
The standing stock of phytoplankton (phy. ) and primary productivity (pp) in the Xiangshan Bay were observed in 1992. The results showed higher biological parameters in the bay. The average chlorophyll a (chl a) con...The standing stock of phytoplankton (phy. ) and primary productivity (pp) in the Xiangshan Bay were observed in 1992. The results showed higher biological parameters in the bay. The average chlorophyll a (chl a) concentration was (3. 50 5. 93 ) mg/m3 and the primary productivity (444. 5 871. 0) mg/(m2 d). The distribution of chl a and productivity showed distinct spatial and temporal patterns in the bay. The continent influence was Obvious at the top of the bay, lower seawater exchange and higher stability led to higher standing stock of phytoplankton and productivity. At the bay mouth, seawater exchanged continuously with adjacent waters by rapid currents, resulting in fast and unstable exchange and lower standing stock of phytoplankton and primary productivity. The seasonal characters of those parameters were pronounced, in the sequence of spring, summer, autumn and winter. The results of size--fractionated showed that the average contribution of the nano--and picoplankton (< 20pm) to total chl a and productivity were 75 % and 87%, respectively, indicating their importance in phytoplankton community biomass and productivity of the Xiangshan Bay.展开更多
We study the existence and stability of the standing waves of two coupled SchrSdinger equations with potentials |x|bi(bi ∈ R,i = 1, 2). Under suitable conditions on the growth of the nonlinear terms, we first est...We study the existence and stability of the standing waves of two coupled SchrSdinger equations with potentials |x|bi(bi ∈ R,i = 1, 2). Under suitable conditions on the growth of the nonlinear terms, we first establish the existence of standing waves of the SchrSdinger system by solving a L2-normalized minimization problem, then prove that the set of all minimizers of this minimization problem is stable. Finally, we obtain the least energy solutions by the Nehari method and prove that the orbit sets of these least energy solutions are unstable, which generalizes the results of [11] where b1 = b2 = 2.展开更多
Asymptotic solutions up to third-order which describe irrotational finite amplitude standing waves are derived in Lagrangian coordinates. The analytical Lagrangian solution that is uniformly valid for large times sati...Asymptotic solutions up to third-order which describe irrotational finite amplitude standing waves are derived in Lagrangian coordinates. The analytical Lagrangian solution that is uniformly valid for large times satisfies the irrotational condition and the pressure p = 0 at the free surface, which is in contrast with the Eulerian solution existing under a residual pressure at the free surface due to Taylor's series expansion. In the third-order Lagrangian approximation, the explicit parametric equation and the Lagrangian wave frequency of water particles could be obtained. In particular, the Lagrangian mean level of a particle motion that is a function of vertical label is found as a part of the solution which is different from that in an Eulerian description. The dynamic properties of nonlinear standing waves in water of a finite depth, including particle trajectory, surface profile and wave pressure are investigated. It is also shown that the Lagrangian solution is superior to an Eulerian solution of the same order for describing the wave shape and the kinematics above the mean water level.展开更多
A 2856-MHz,π-mode,seven-cell standingwave deflecting cavity was designed and fabricated for bunch length measurement in Tsinghua Thomson scattering X-ray source(TTX)facility.This cavity was installed in the TTX and p...A 2856-MHz,π-mode,seven-cell standingwave deflecting cavity was designed and fabricated for bunch length measurement in Tsinghua Thomson scattering X-ray source(TTX)facility.This cavity was installed in the TTX and provided a deflecting voltage of 4.2 MV with an input power of 2.5 MW.Bunch length diagnoses of electron beams with energies up to 39 MeV have been performed.In this article,the RF design of the cavity using HFSS,fabrication,and RF test processes are reviewed.High-power operation with accelerated beams and calibration of the deflecting voltage are also presented.展开更多
We report a universal transfer methodology for producing artificial heterostructures of large-area freestanding single-crystalline WTe_(2) membranes on diverse target substrates.The transferred WTe_(2) membranes exhib...We report a universal transfer methodology for producing artificial heterostructures of large-area freestanding single-crystalline WTe_(2) membranes on diverse target substrates.The transferred WTe_(2) membranes exhibit a nondestructive structure with a carrier mobility comparable to that of as-grown films(∼179–1055 cm^(2)·V^(−1)·s^(−1)).Furthermore,the transferred membranes show distinct Shubnikov–de Haas quantum oscillations as well as weak localization/weak anti-localization.These results provide a new approach to the development of atom manufacturing and devices based on atomic-level,large-area topological quantum films.展开更多
文摘Food safety problems caused by excessive nitrite addition have been frequently reported and the detection of nitrite in food is particularly important. The standing time during the pretreatment of primary sample has a great influence on the concentration of nitrite tested by spectrophotometric method. In this context, three kinds of food samples are prepared, including canned mustard, canned fish and home-made pickled water. A series of standing times are placed during the sample pretreatments and the corresponding nitrite contents in these samples are detected by spectrophotometric method based on N-ethylenediamine dihydrochloride. This study aims to find out a reasonable standing time during the pretreatment of food sample, providing influence factor for precise detection of nitrite.
文摘In this paper, we study the existence of standing waves for the nonlinear Schrödinger equation with combined power-type nonlinearities and a partial harmonic potential. In the L<sup>2</sup>-supercritical case, we obtain the existence and stability of standing waves. Our results are complements to the results of Carles and Il’yasov’s artical, where orbital stability of standing waves have been studied for the 2D Schrödinger equation with combined nonlinearities and harmonic potential.
文摘Twenty-seven specimens were tested to investigate the uniaxial compression behaviour of an innovative standing support for underground space applications.The innovative standing support consisted of an external fibre reinforced polymer(FRP)jacket and the infill column made of cementitious grout,tailings and coal wash rejects.Effects of the FRP layers number and water to the cementitious grout(w/g)ratio were evaluated.Test results indicated that lower w/g ratios produced stronger infill columns.With FRP confinement,the standing support demonstrated strain-hardening loading characteristics with a significant improvement in both strength and ductility.The highest strength and strain of the specimens achieved was 58.4 MPa and 11.8%respectively.Compared with the unconfined specimens,the confinement with four FRP layers increased the specimen strength and associated strain up to 3.6 and 27.0 times respectively.A correlation between the compressive strength of the infill material and the ultrasonic pulse velocity was also investigated.Furthermore,a simple design-oriented model was proposed to predict the peak strength and the corresponding strain of the innovative standing support.
基金This work was supported by National Natural Science Foundation of China(Nos.12005061,12065019)the Natural Science Foundation of Jiangxi Province(No.20202 BABL214036).
文摘The streamer that is driven by the specific pulse DC discharge parameters can stably form a three-dimensional helical plasma channel in a long dielectric tube in the low-temperature plasma experiment,in cases when there were neither external background magnetic field or other factors that destroyed the poloidal symmetry of the tube.The formation mechanism and chirality of helical streamers are discussed according to the surface electromagnetic standing wave theory.The shape of the helical streamers and the characteristics of helical branches are quantitatively analyzed to further expand the application of plasma and streamer theory in the helix problem and chiral catalytic synthesis.
文摘正At the invitation of the Ministry of Foreign Affairs of Israel, Grand National Assembly of Turkey (TBMM) and Delhi Study Group of India, a delegation of the Chinese Association for International Understanding (CAFIU) headed
文摘正The Understanding and Cooperation Dialogue, Sponsored by the Chinese Association for International Understanding (CAFIU) and the China Foundation for Peace and Development (CFPD), and Co-organized by the Chinese People' s Association for Peace and
基金Funded by the National Basic Research Program (973 program) (No. 2011CB707602)the Digital Manufacturing Equipment and Technology National Key Laboratory,Huazhong University of Science and Technology (No. DMETKF2009002)National Sciences Foundation-Guangdong Natural Science Foundation,China (No.U0934004)
文摘A contact model for describing the contact mechanics between the stator and slider of the standing wave linear ultrasonic motor was presented. The proposed model starts from the assumption that the vibration characteristics of the stator is not affected by the contact process. A modified friction models was used to analyze the contact problems. Firstly, the dynamic normal contact force, interface friction force, and steady-state characteristics were analyzed. Secondly, the influences of the contact layer material, the dynamic characteristics of the stator, and the pre-load on motor performance were simulated. Finally, to validate the contact model, a linear ultrasonic motor based on in-plane modes was used as an example. The corresponding results show that a set of simulation of motor performances based on the proposed contact mechanism is in good agreement with experimental results. This model is helpful to understanding the operation principle of the standing wave linear motor and thus contributes to the design of these types of motor.
基金This subject was partly supported by the National Excellent Youth Foundation of China (Grant No. 49825161)
文摘Based on the theoretical high-order model with a dissipative term for non-linear and dispersive wave in water of varying depth, a 3-D mathematical model of non-linear wave propagation is presented. The model, which can be used to calculate the wave particle velocity and wave pressure, is suitable to the complicated topography whose relative depth (d/lambda(0), ratio of the characteristic water depth to the characteristic wavelength in deep-water) is equal to or smaller than one. The governing equations are discretized with the improved 2-D Crank-Nicolson method in which the first-order derivatives are corrected by Taylor series expansion, And the general boundary conditions with an arbitrary reflection coefficient and phase shift are adopted in the model. The surface elevation, horizontal and vertical velocity components and wave pressure of standing waves are numerically calculated. The results show that the numerical model can effectively simulate the complicated standing waves, and the general boundary conditions possess good adaptability.
文摘In this paper bottom scours in front of vertical breakwaters by standing waves are systematically investigated, the scouring patterns, criterion for differentiating the scouring patterns and scouring mechanism are discussed ; a formula of maximum depth of scouring trough considering sediment size is given; and influence of mound foundation on bottom scours is investigated.
文摘The physical design and cooling test of a C-band 2MeV standing wave (SW) accelerating tube are described in this paper. The designed accelerating structure consists of 3-cell buncher and 4-cell accelerating section with a total length of about 163mm, excited with 1MW magnetron. Dynamic simulation presents that about 150mA beam pulse current and 30% capture efficiency can be achieved. By means of nonlinear Gauss fit on electron transverse distribution, the diameter of beam spot FWHM (full width at half maximum of density distribution) is about 0.55mm. Cooling test results of the accelerating tube show that frequencies of cavities are tuned to 5527MHz and the field distribution of bunching section is about 3:9:10.
基金supported by the National Key R&D Program of China(No.2017YFE0301201)National Natural Science Foundation of China(No.11975038)the funding support from the State Key Laboratory of Nuclear Physics and Technology,Peking University(No.NPT2021ZZ03)。
文摘Helicon wave plasma sources have the well-known advantages of high efficiency and high plasma density, with broad applications in many areas. The crucial mechanism lies with mode transitions, which has been an outstanding issue for years. We have built a fluid simulation model and further developed the Peking University Helicon Discharge code. The mode transitions, also known as density jumps, of a single-loop antenna discharge are reproduced in simulations for the first time. It is found that large-amplitude standing helicon waves(SHWs) are responsible for the mode transitions, similar to those of a resonant cavity for laser generation.This paper intends to give a complete and quantitative SHW resonance theory to explain the relationship of the mode transitions and the SHWs. The SHW resonance theory reasonably explains several key questions in helicon plasmas, such as mode transition and efficient power absorption, and helps to improve future plasma generation methods.
文摘For ion cyclotron resonance heating, the current on the antenna surface exists in a form of standing wave, and the phase of the poloidal current standing wave affects significantly on the performance of the coupling. In this paper, a coupling calculation is carried out based on a practical model for the loop antenna. The ion cyclotron wave coupling performance depends greatly on the antenna current propagation constant and the phase of standing wave. For a small antenna-current-propagation constant, the antenna coupling performance is more sensitive to a π/2 change in the phase of standing wave.
文摘Background: Although the standing long jump (SLJ) is a popular physical fitness assessment, it lacks an updated criterion-reference standard. This study generated the first normative SLJ test data for Chinese aged 8 - 18. Methods: From September 2005 to December 2011, comprehensive physical fitness assessments were conducted on 12,712 school students. The SLJ performances were significantly different between boys and girls (all age groups, p < 0.01). Results: The boys performed better than the girls in each age group. The mean difference increased as the age increased, depicting a prominent variance in muscular strength between boys and girls at age 12, and the variances became larger at age 18. Girls in the 70th percenttile performed similarly to boys performing in the 10th percentile. The onset of muscle strength for boys found in this study corresponded to the onset age of testosterone maturation of Chinese boys investigated in previous studies. Linear regression found age and BMI predicting SLJ significantly for boys and girls, explaining better SLJ results in older boy and the effect of their heavy body size. Conclusions: This study indicated a muscular strength difference between genders during growth and added supporting evidence to the hormonal influence of muscle growth during puberty.
基金supported by the Australia government through the Australian Research Council’s Industrial Transformation Research Hub for nanoscience based construction material manufacturing(IH150100006)the Australia Coal Industry’s Research Program(C28068)。
文摘This paper presents the development of an innovative standing support for underground mines.The main feature of this standing support is its exterior container,a combination of polyvinyl chloride(PVC)with large rupture strain and fibre-reinforced polymer(FRP)with high strength-to-weight ratio.To demonstrate the advantages of this cementitious grout filled PVC-FRP tubular(PFT)standing support,a series of compression tests were conducted.Test variables included the strength of cementitious grout infill material and the thickness of FRP jacket.Compression tests were also conducted on cementitious grout-filled PVC tubular(PT)support and cementitious grout-filled FRP tubular(FT)support.These tests showed that PFT support presents a typical strain-hardening behaviour together with an outstanding axial deformation ability(>20%of the overall height of the support).In addition,the maximum compressive strength of PFT support is much higher than that of the corresponding PT support and FT support.Furthermore,using thicker FRP jacket or high strength cementitious grout material can enhance the load carrying capacity of PFT support.These comparative results indicated that the high performance of PFT support is mainly attributed to the combination of confining constituents(i.e.PVC and FRP)and infill material.
基金Zhejiang Natural Scientific Foundation of China under contract! No. 394014.
文摘The standing stock of phytoplankton (phy. ) and primary productivity (pp) in the Xiangshan Bay were observed in 1992. The results showed higher biological parameters in the bay. The average chlorophyll a (chl a) concentration was (3. 50 5. 93 ) mg/m3 and the primary productivity (444. 5 871. 0) mg/(m2 d). The distribution of chl a and productivity showed distinct spatial and temporal patterns in the bay. The continent influence was Obvious at the top of the bay, lower seawater exchange and higher stability led to higher standing stock of phytoplankton and productivity. At the bay mouth, seawater exchanged continuously with adjacent waters by rapid currents, resulting in fast and unstable exchange and lower standing stock of phytoplankton and primary productivity. The seasonal characters of those parameters were pronounced, in the sequence of spring, summer, autumn and winter. The results of size--fractionated showed that the average contribution of the nano--and picoplankton (< 20pm) to total chl a and productivity were 75 % and 87%, respectively, indicating their importance in phytoplankton community biomass and productivity of the Xiangshan Bay.
基金supported by NSFC(11471331,11101418 and 11271360)
文摘We study the existence and stability of the standing waves of two coupled SchrSdinger equations with potentials |x|bi(bi ∈ R,i = 1, 2). Under suitable conditions on the growth of the nonlinear terms, we first establish the existence of standing waves of the SchrSdinger system by solving a L2-normalized minimization problem, then prove that the set of all minimizers of this minimization problem is stable. Finally, we obtain the least energy solutions by the Nehari method and prove that the orbit sets of these least energy solutions are unstable, which generalizes the results of [11] where b1 = b2 = 2.
文摘Asymptotic solutions up to third-order which describe irrotational finite amplitude standing waves are derived in Lagrangian coordinates. The analytical Lagrangian solution that is uniformly valid for large times satisfies the irrotational condition and the pressure p = 0 at the free surface, which is in contrast with the Eulerian solution existing under a residual pressure at the free surface due to Taylor's series expansion. In the third-order Lagrangian approximation, the explicit parametric equation and the Lagrangian wave frequency of water particles could be obtained. In particular, the Lagrangian mean level of a particle motion that is a function of vertical label is found as a part of the solution which is different from that in an Eulerian description. The dynamic properties of nonlinear standing waves in water of a finite depth, including particle trajectory, surface profile and wave pressure are investigated. It is also shown that the Lagrangian solution is superior to an Eulerian solution of the same order for describing the wave shape and the kinematics above the mean water level.
基金This work was supported by the National Natural Science Foundation of China(No.11922504).
文摘A 2856-MHz,π-mode,seven-cell standingwave deflecting cavity was designed and fabricated for bunch length measurement in Tsinghua Thomson scattering X-ray source(TTX)facility.This cavity was installed in the TTX and provided a deflecting voltage of 4.2 MV with an input power of 2.5 MW.Bunch length diagnoses of electron beams with energies up to 39 MeV have been performed.In this article,the RF design of the cavity using HFSS,fabrication,and RF test processes are reviewed.High-power operation with accelerated beams and calibration of the deflecting voltage are also presented.
基金Supported by the National Key R&D Program of China(Grant No.2017YFA0206304)the National Natural Science Foundation of China(Grant Nos.11874203,61822403,U1732159,11774160,and 61427812)the Fundamental Research Funds for the Central Universities(Grant No.021014380080)。
文摘We report a universal transfer methodology for producing artificial heterostructures of large-area freestanding single-crystalline WTe_(2) membranes on diverse target substrates.The transferred WTe_(2) membranes exhibit a nondestructive structure with a carrier mobility comparable to that of as-grown films(∼179–1055 cm^(2)·V^(−1)·s^(−1)).Furthermore,the transferred membranes show distinct Shubnikov–de Haas quantum oscillations as well as weak localization/weak anti-localization.These results provide a new approach to the development of atom manufacturing and devices based on atomic-level,large-area topological quantum films.