期刊文献+
共找到294篇文章
< 1 2 15 >
每页显示 20 50 100
A new tracking error detection method using amplitude difference detection for signal waveform modulation multi-level discs 被引量:1
1
作者 严明铭 裴京 潘龙法 《Chinese Physics B》 SCIE EI CAS CSCD 2010年第10期319-323,共5页
The sub-land/sub-pit affects the characteristic of the tracking error signal which is generated by the conventional differential phase detection (DPD) method in the signal waveform modulation multi-level (SWML) re... The sub-land/sub-pit affects the characteristic of the tracking error signal which is generated by the conventional differential phase detection (DPD) method in the signal waveform modulation multi-level (SWML) read-only disc. To solve this problem, this paper proposes a new tracking error detection method using amplitude difference. Based on the diffraction theory, the amplitude difference is proportional to the tracking error and is feasible to be used for obtaining the off-track information. The experimental system of the amplitude difference detection method is developed. The experimental results show that the tracking error signal derived from the new method has better performance in uniformity and signal-to-noise ratio than that derived from the conventional DPD method in the SWML read-only disc. 展开更多
关键词 signal waveform modulation multi-level technology tracking error amplitude difference
下载PDF
Improved partial response maximum likelihood method combining modulation code for signal waveform modulation multi-level disc
2
作者 王鹤群 裴京 潘龙法 《Chinese Physics B》 SCIE EI CAS CSCD 2014年第10期213-219,共7页
In this paper, we describe an improved adaptive partial response maximum likelihood (PRML) method combining modulation code tbr signal waveform modulation multi-level disc. This improved adaptive PRML method employs... In this paper, we describe an improved adaptive partial response maximum likelihood (PRML) method combining modulation code tbr signal waveform modulation multi-level disc. This improved adaptive PRML method employs partial response equalizer and adaptive viterbi detector combining modulation code. Compared with the traditional adaptive PRML detector, the improved PRML detector additionally employs illogical sequence detector and corrector. Illogical sequence detector and corrector can aw)id the appearance of illogical sequences effectively, which do not follow the law of modulation code for signal waveform modulation multi-level disc, and obtain the correct sequences. We implement the improved PRML detector using a DSP and an FPGA chip. The experimental results show good performance. The higher efficient and lower complexity can be obtained by using the improved PRML method than by using the previous PRML method. Meanwhile, resource utilization of the improved PRML detector is not changed, but the bit error rate (BER) is reduced by more than 20%. 展开更多
关键词 multi-level disc signal waveform modulation viterbi detector partial response maximum likeli-hood
下载PDF
Read channel for signal waveform modulation multi-level disc
3
作者 王鹤群 徐海峥 +1 位作者 潘龙法 刘海龙 《Chinese Physics B》 SCIE EI CAS CSCD 2010年第12期334-338,共5页
A novel read channel for signal waveform modulation multi-level disc is presented in this paper. This read channel employs timing recovery system and partial response maximum likelihood detector. Compared to the previ... A novel read channel for signal waveform modulation multi-level disc is presented in this paper. This read channel employs timing recovery system and partial response maximum likelihood detector. Compared to the previous read channel composed of level detection and run-length detection, the present read channel shows superiority in capacity increase and robust performance. Especially, relying on the partial response maximum likelihood detection, lower bit error rate can be obtained. 展开更多
关键词 multi-level disc signal waveform modulation read channel partial response maximum likelihood
下载PDF
A Comprehensive Survey of Candidate Waveforms for 5G, beyond 5G and 6G Wireless Communication Systems
4
作者 Bakhit Amine Adoum Kalsouabe Zoukalne +3 位作者 Mahamat Saleh Idriss Ali Mahmoud Ali Amir Moungache Mahamoud Youssouf Khayal 《Open Journal of Applied Sciences》 CAS 2023年第1期136-161,共26页
The evolution of global mobile data over the past decades in broadcasting, Internet of Things (IoT), education, healthcare, commerce, and energy has put strong pressure on 3G/4G mobile networks to improve their servic... The evolution of global mobile data over the past decades in broadcasting, Internet of Things (IoT), education, healthcare, commerce, and energy has put strong pressure on 3G/4G mobile networks to improve their service offerings. These generations of mobile networks were initially invented to meet the requirements of the above-mentioned applications. However, as the requirements in these applications continue to increase, new mobile technologies such as 5G (fifth generation), 5G and beyond (B5G, beyond fifth generation), and 6G (sixth generation) are still progressing and being experimented. These networks are very heterogeneous generations of mobile networks that will have to offer very high throughput per user, good energy efficiency, better traffic capacity per area, improved spectral efficiency, very low latency, and high mobility. To meet these requirements, the radio interface of future mobile networks will have to be flexible and rationalized the available frequency resources. Therefore, new modulation methods, access techniques and waveforms capable of supporting these technological changes are proposed. This review presents brief descriptions of the types of 5G, B5G, and 6G waveforms. The 5G consists of OFDM including its transmission techniques: generalized frequency division multiplexing (GFDM), filter bank based multi-carrier (FBMC), universal filtered multi-carrier (UFMC), and index modulation (IM). Meanwhile, the 6G covers orthogonal time frequency space (OTFS), orthogonal chirp division multiplexing (OCDM) and orthogonal time sequence multiplexing (OTSM). The networks’ potentialities, advantages, disadvantages, and future directions are outlined. 展开更多
关键词 modulation 5G B5G 6G waveformS
下载PDF
局部干法水下快频脉冲MIG焊电源研制
5
作者 王振民 贾建军 +3 位作者 胡健良 廖海鹏 吴健文 张芩 《焊接学报》 EI CAS CSCD 北大核心 2024年第4期13-19,I0003,I0004,共9页
针对复杂水下环境焊接过程对焊接电源超高动特性与精确控制需求,设计基于SiC模块的快频脉冲焊接电源功率主电路,开发全数字化控制系统,研制出局部干法水下快频脉冲MIG焊电源(local dry underwater fastfrequency pulsed MIG,LDU-FFPMIG)... 针对复杂水下环境焊接过程对焊接电源超高动特性与精确控制需求,设计基于SiC模块的快频脉冲焊接电源功率主电路,开发全数字化控制系统,研制出局部干法水下快频脉冲MIG焊电源(local dry underwater fastfrequency pulsed MIG,LDU-FFPMIG).研制的LDU-FFPMIG焊接电源额定输出电流为400 A,能精确输出多种0~30 kHz的快频脉冲电流波形,快频脉冲电流幅值高达200 A.提出LDU-FFPMIG焊接新工艺,将快频脉冲应用到304不锈钢局部干法水下MIG焊接,探究快频脉冲对传统局部干法水下脉冲MIG焊的影响.结果表明,研制的LDU-FFPMIG焊接电源能够实现稳定的局部干法水下MIG焊,可获得良好的焊缝成形;快频脉冲电流的引入可显著提高电弧能量密度和焊接稳定性,减小熔宽(B)、增大熔深(H),焊缝成形系数(B/H)减小约30%,并且可以细化晶粒. 展开更多
关键词 焊接电源 SiC模块 全数字化快频脉冲波形 局部干法水下MIG焊
下载PDF
基于偏振复用调制的周期性光学任意波形生成方案
6
作者 王雪辉 李晶 +4 位作者 燕苗霞 裴丽 宁提纲 郑晶晶 王建帅 《光通信技术》 北大核心 2024年第3期95-101,共7页
针对复杂波形生成的需求,提出了一种基于偏振复用调制的周期性光学任意波形信号生成方案。通过精心调控正交相移键控(QPSK)调制器的调制指数、射频偏移及偏置相移等关键参数,使得2个正交偏振态上的调制器能够分别输出傅里叶级数中的正... 针对复杂波形生成的需求,提出了一种基于偏振复用调制的周期性光学任意波形信号生成方案。通过精心调控正交相移键控(QPSK)调制器的调制指数、射频偏移及偏置相移等关键参数,使得2个正交偏振态上的调制器能够分别输出傅里叶级数中的正弦和余弦谐波叠加形式的光强。当这些光强合束后,就能得到幅度和相位均可精确控制的函数波形,而且还具备可调谐函数波形信号输出的特性。仿真结果表明:当均方根误差小于等于0.05时,该方案可生成对称因子可调(20%~80%)斜坡波、占空比可调(30%~100%)三角波和半占空比可调(20%~80%)斜坡波3种典型波形,验证了该方案的可行性。 展开更多
关键词 偏振复用调制 对称因子可调 占空比可调 半占空比可调 函数波形 傅里叶级数
下载PDF
一种幅相联合调制雷达波形设计与处理方法
7
作者 赵铁华 吴其华 +3 位作者 赵锋 刘晓斌 徐志明 肖顺平 《太赫兹科学与电子信息学报》 2024年第4期394-404,共11页
随着脉内特征识别、信号分选等电子侦察技术的发展,雷达波形设计正面临严峻的挑战。幅度调制作为一种新型脉冲调制方式,能够增加信号时域的复杂性,提升波形的反识别能力。本文提出一种幅相联合编码雷达波形,通过幅度相位联合调制提升雷... 随着脉内特征识别、信号分选等电子侦察技术的发展,雷达波形设计正面临严峻的挑战。幅度调制作为一种新型脉冲调制方式,能够增加信号时域的复杂性,提升波形的反识别能力。本文提出一种幅相联合编码雷达波形,通过幅度相位联合调制提升雷达波形的复杂度,具有良好的反侦察潜力;利用幅度上的稀疏采样特点,提出匹配滤波与压缩感知相结合的回波信号处理方法处理此信号,有效提升低信噪比条件下的检测概率。最后通过仿真实验证明了所提幅相联合调制雷达波形设计与处理方法的有效性。 展开更多
关键词 雷达波形设计 幅相联合调制 压缩感知 正交匹配追踪
下载PDF
可编程多脉冲绿光激光器
8
作者 吴丽霞 《激光技术》 CAS CSCD 北大核心 2024年第2期204-209,共6页
为了满足平面激光诱导荧光技术和反射物速度干涉仪系统的应用要求,研制出一套可编程多脉冲绿光激光器。采用光强可编程技术,在任意波形发生器中输入一长脉冲电压波形,并将其加载到电光调制器上;通过对此电压脉冲波形的编辑,在实现时域... 为了满足平面激光诱导荧光技术和反射物速度干涉仪系统的应用要求,研制出一套可编程多脉冲绿光激光器。采用光强可编程技术,在任意波形发生器中输入一长脉冲电压波形,并将其加载到电光调制器上;通过对此电压脉冲波形的编辑,在实现时域上控制光强的同时输出多脉冲,且多脉冲的脉冲间隔、脉冲宽度及脉冲波形均任意可调。结果表明,放大过程的波形畸变得到矫正,获得脉宽为110 ns的绿光单脉冲方波;脉宽为50 ns、时间间隔5μs的绿光双脉冲方波;脉宽为40 ns、50 ns和60 ns、时间间隔为2μs、1μs的绿光三脉冲方波。该研究为平面激光诱导荧光技术和反射物速度干涉仪系统提供了参考。 展开更多
关键词 激光器 多脉冲 脉冲整形 任意波形 电光调制器
下载PDF
基于多点频调制的反利用波形设计和优化处理
9
作者 彭哲凡 武亚涛 郭国强 《现代雷达》 CSCD 北大核心 2024年第6期50-55,共6页
常规的雷达线性调频及编码波形易被无源非合作雷达利用,目前的雷达波形设计中均未考虑到波形被利用的问题。针对该问题,提出一种基于多点频调制的反利用波形。波形设计上,利用minimax方法设计出匹配滤波后具有多假目标的特殊频率编码波... 常规的雷达线性调频及编码波形易被无源非合作雷达利用,目前的雷达波形设计中均未考虑到波形被利用的问题。针对该问题,提出一种基于多点频调制的反利用波形。波形设计上,利用minimax方法设计出匹配滤波后具有多假目标的特殊频率编码波形,再对该波形进行多点频调制破坏匹配滤波的副瓣性能。在进行波形处理时,根据波形的先验知识,首先通过预先设计的陷波器进行去多点频调制,然后通过多约束条件下的凸优化方法进行失配滤波器设计,再采用设计的失配滤波器系数进行失配滤波,消除假目标的影响,降低副瓣水平,获得良好的探测指标。通过仿真分析了该波形在匹配滤波时副瓣水平高,存在多个假目标可混淆真目标的距离信息的特性,难以被无源非合作雷达利用,而优化处理可获得良好探测性能。 展开更多
关键词 反利用波形 特殊频率编码波形 多点频调制 凸优化方法 失配滤波
下载PDF
变换域通信系统研究现状与问题分析
10
作者 侯文达 付天晖 +2 位作者 隋晓杰 王龙飞 修梦雷 《信息技术》 2024年第1期24-29,36,共7页
变换域通信系统(TDCS)通过感知周边电磁环境,在收发两端设计出相同的基础调制波形,该波形具有伪噪声性质且规避了干扰频段,从而降低了信号被截获的概率,有效地提高了通信抗干扰能力。文中介绍了TDCS的基本原理,综述了TDCS相关技术的研... 变换域通信系统(TDCS)通过感知周边电磁环境,在收发两端设计出相同的基础调制波形,该波形具有伪噪声性质且规避了干扰频段,从而降低了信号被截获的概率,有效地提高了通信抗干扰能力。文中介绍了TDCS的基本原理,综述了TDCS相关技术的研究现状,分析了当前TDCS应用中面临的关键问题及未来技术发展。 展开更多
关键词 变换域通信系统 基础调制波形 伪造声 抗干扰
下载PDF
MSK-LFM一体化信号波形相关性分析与参数选择
11
作者 杨铭 高猛 《大连民族大学学报》 CAS 2024年第1期51-56,共6页
以二进制数字信号最佳接收准则为依据,分析了MSK-LFM雷达通信一体化信号不同码元对应波形的相关性。利用fresnel函数得到了波形相关系数的表达式;通过数值仿真得到了相关系数随LFM信号的初始频率、调频率、脉冲内码元调制速率等参数的... 以二进制数字信号最佳接收准则为依据,分析了MSK-LFM雷达通信一体化信号不同码元对应波形的相关性。利用fresnel函数得到了波形相关系数的表达式;通过数值仿真得到了相关系数随LFM信号的初始频率、调频率、脉冲内码元调制速率等参数的变化关系;构建MSK-LFM信号正交调制、解调仿真模型进行验证。研究表明,通过增大初始频率、调频率或减少调制速率可降低信号误码率;当初始频率远大于脉冲内码元调制速率时可认为不同码元波形正交。 展开更多
关键词 雷达通信一体化 最小频移键控 线性调频 波形相关性
下载PDF
激光切割调高器微距测量传感器设计
12
作者 李正昊 《科技创新与应用》 2024年第18期59-62,共4页
该文针对现有的激光切割调高技术需求,提出一种基于电容器原理的非接触式微距测量方法,该方法是通过克拉泼振荡电路将激光切割喷嘴与工件之间形成的电容器电容信号调制转化为一定频率的高频正弦波信号,并基于电流反馈型的运算放大器和... 该文针对现有的激光切割调高技术需求,提出一种基于电容器原理的非接触式微距测量方法,该方法是通过克拉泼振荡电路将激光切割喷嘴与工件之间形成的电容器电容信号调制转化为一定频率的高频正弦波信号,并基于电流反馈型的运算放大器和波形转化电路实现高精度、无失真、极低时滞的信号放大与波形转化。最后通过实验分析,该传感器满足信号输出稳定、重复性良好、分辨率高和量程合适等要求,达到激光切割调高技术需求的理想测距效果。 展开更多
关键词 激光切割调高技术 微距测量 信号调制 传感器 波形转化
下载PDF
Quasi-LFM radar waveform recognition based on fractional Fourier transform and time-frequency analysis 被引量:2
13
作者 XIE Cunxiang ZHANG Limin ZHONG Zhaogen 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2021年第5期1130-1142,共13页
Recent advances in electronics have increased the complexity of radar signal modulation.The quasi-linear frequency modulation(quasi-LFM)radar waveforms(LFM,Frank code,P1−P4 code)have similar time-frequency distributio... Recent advances in electronics have increased the complexity of radar signal modulation.The quasi-linear frequency modulation(quasi-LFM)radar waveforms(LFM,Frank code,P1−P4 code)have similar time-frequency distributions,and it is difficult to identify such signals using traditional time-frequency analysis methods.To solve this problem,this paper proposes an algorithm for automatic recognition of quasi-LFM radar waveforms based on fractional Fourier transform and time-frequency analysis.First of all,fractional Fourier transform and the Wigner-Ville distribution(WVD)are used to determine the number of main ridgelines and the tilt angle of the target component in WVD.Next,the standard deviation of the target component's width in the signal's WVD is calculated.Finally,an assembled classifier using neural network is built to recognize different waveforms by automatically combining the three features.Simulation results show that the overall recognition rate of the proposed algorithm reaches 94.17%under 0 dB.When the training data set and the test data set are mixed with noise,the recognition rate reaches 89.93%.The best recognition accuracy is achieved when the size of the training set is taken as 400.The algorithm complexity can meet the requirements of real-time recognition. 展开更多
关键词 quasi-linear frequency modulation(quasi-LFM)radar waveform time-frequency distribution fractional Fourier transform(FrFT) assembled classifier
下载PDF
UWB Communication System Based on Bipolar PPM with Orthogonal Waveforms
14
作者 Amel Elabed Fouzia Elbahhar +2 位作者 Yassin Elhillali Atika Rivenq Raja Elassali 《Wireless Engineering and Technology》 2012年第3期181-188,共8页
In many classic Ultra Wide Band communication systems, only Gaussian and monocycle pulses associate to PPM modulation are used. In this paper, an original communication system based on orthogonal functions and the Bip... In many classic Ultra Wide Band communication systems, only Gaussian and monocycle pulses associate to PPM modulation are used. In this paper, an original communication system based on orthogonal functions and the Bipolar PPM modulation is proposed. This system allows good performances in terms of Bit Error Rate (BER) and high data rate. This study concerns new applications, such as Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I) communication systems or a wireless link between computers. These applications need high reliability to transmit security-related information and high data rate to exchange multimedia data. With the emergence of the orthogonal wave-forms, the performances of the UWB communication system will be more interesting in terms of BER and data rate. In this paper, two kinds of improvement are proposed. The first improvement permits us to decrease the Bit Error Rate using the original waveforms. The second allows improving the data rate via novel modulation method. The last parameter study, in this paper, concerns the problem of synchronization between the different users. We will study the performances of the proposed system in multiusers environment in synchronous and asynchronous cases. In the first stage, the theoretical and simulation results will be presented for the proposed system. The simulation results obtained by comparing the classic UWB system and the proposed system show that our solution gives good performances in terms of BER and data rate. The theoretical results of BER values will be given for our proposed solution. In the second stage, we will compute BER values for different jitter effects. Theses studies report theoretical and simulation performances evaluation in the case of two 展开更多
关键词 UWB Orthogonal waveform PPM Pulse Position modulation and Antipodal modulation JITTER MULTIUSER
下载PDF
Evaluation Method of Output Waveform Quality for Neutral⁃Point⁃ Clamped Three⁃Level Converter
15
作者 Guozheng Zhang Changliang Xia 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2020年第3期92-100,共9页
An analytical evaluation method for output waveform quality of space vector pulse width modulation(PWM)strategies applied in neutral⁃point⁃clamped three⁃level converter(3L⁃NPC)is proposed in this paper.Low frequency e... An analytical evaluation method for output waveform quality of space vector pulse width modulation(PWM)strategies applied in neutral⁃point⁃clamped three⁃level converter(3L⁃NPC)is proposed in this paper.Low frequency error caused by neutral point voltage ripple and high frequency error introduced by space vector synthesis were both taken into account,and the unified error model of output current ripple was established.By taking continuous and discontinuous modulation strategies as examples,the unified error model was validated through Fourier analysis of the experimental results.The proposed evaluation method will be helpful for the switching sequence optimization and the modulation strategy selection. 展开更多
关键词 neutral⁃point⁃clamped(NPC) three⁃level(3L)converter space vector modulation(SVM) neutral point voltage ripple output waveform quality
下载PDF
Ultrashort optical pulse shaper based on complex-modulated long-period-grating coupler
16
作者 董小伟 刘文楷 《Chinese Physics B》 SCIE EI CAS CSCD 2013年第2期287-290,共4页
In this paper,we present a novel ultrashort pulse shaper based on complex-modulated long-period-grating coupler(CM-LPGC).Temporal rectangular waveform with 2-ps full width at half maximum(FWHM) is obtained by tran... In this paper,we present a novel ultrashort pulse shaper based on complex-modulated long-period-grating coupler(CM-LPGC).Temporal rectangular waveform with 2-ps full width at half maximum(FWHM) is obtained by transforming the input Gaussian pulse.Tolerances of the CM-LPGC-based shaper to various non-ideal excitation conditions and fabricating errors are investigated.Results confirm that CM-LPGC is stable and suitable for optical pulse shaping operation. 展开更多
关键词 ultrafast process optical pulse shaper complex-modulated long-period-grating coupler rectangular waveform
下载PDF
雷达波形通用调制引擎设计
17
作者 汪敏 冯一伦 +1 位作者 蒋彦雯 范红旗 《系统工程与电子技术》 EI CSCD 北大核心 2023年第6期1684-1692,共9页
针对软件化雷达复杂调制波形高效灵活产生的问题,以相干处理间隔为更新周期将复杂调制脉冲串抽象描述为波形矩阵,提出一种调选分离的雷达波形产生方式,降低了上位机的计算量以及到硬件的传输延迟。在此基础上,设计了一种基于现场可编程... 针对软件化雷达复杂调制波形高效灵活产生的问题,以相干处理间隔为更新周期将复杂调制脉冲串抽象描述为波形矩阵,提出一种调选分离的雷达波形产生方式,降低了上位机的计算量以及到硬件的传输延迟。在此基础上,设计了一种基于现场可编程门阵列(field programmble gate array, FPGA)的雷达波形通用调制引擎,可实现波形产生与波形样式解耦、波形优化/选用与波形产生解耦。基于商用现货(commercial off-the-shelf, COTS)的系统测试表明,通用调制引擎可灵活支持脉内任意调制、脉间波形捷变以及初相、频偏、幅度、重复间隔等脉间参数调制,为软件化雷达波形产生与灵活运用提供设计参考。 展开更多
关键词 软件化雷达 波形矩阵 波形产生 脉间调制 波形捷变 调制引擎 现场可编程门阵列 波形对抗
下载PDF
信息跳时架构下分层捷变低截获概率通信波形
18
作者 宁晓燕 李书凯 +1 位作者 孙志国 毛慧敏 《哈尔滨工程大学学报》 EI CAS CSCD 北大核心 2023年第4期664-672,共9页
针对周期信号抗破译性能较差及非周期聚敛性带来的误码性能下降的问题,本文提出一种时宽-信息跳时-调频率分层波形架构。通过构建信息跳时,掩护时宽随机化的模式,解决了误码性能变时宽下降问题,加强了波形的低截获概率特征。本文以数学... 针对周期信号抗破译性能较差及非周期聚敛性带来的误码性能下降的问题,本文提出一种时宽-信息跳时-调频率分层波形架构。通过构建信息跳时,掩护时宽随机化的模式,解决了误码性能变时宽下降问题,加强了波形的低截获概率特征。本文以数学推导和仿真分析的方法,探究了此分层波形架构下的误码性能、功率谱类噪声性能、二次谱域周期聚敛性及先验信息抗破译性。理论分析和仿真验证表明:时宽-信息跳时-调频率分层波形可以保证与定时宽信号相比,在不降低误码性能的条件下,降低了波形的周期聚敛性,从而提高了波形的截获概率性能。 展开更多
关键词 分层波形架构 低截获概率 误码性能 周期聚敛特性 周期信号 信息跳时 变时宽 调频率
下载PDF
用于电感负载的全固态双极性LTD型脉冲电流发生器 被引量:1
19
作者 许宁 米彦 +2 位作者 李政民 郑伟 马驰 《电工技术学报》 EI CSCD 北大核心 2023年第13期3413-3424,共12页
在基于脉冲功率技术的肿瘤治疗方法中,利用双极性脉冲磁场处理的治疗方法具有明显的优势。针对此应用,该文结合模块化全桥型多电平换流器(FB-MMC)拓扑及直线变压器驱动(LTD)拓扑的优势,提出了一种用于电感负载的全固态双极性LTD型脉冲... 在基于脉冲功率技术的肿瘤治疗方法中,利用双极性脉冲磁场处理的治疗方法具有明显的优势。针对此应用,该文结合模块化全桥型多电平换流器(FB-MMC)拓扑及直线变压器驱动(LTD)拓扑的优势,提出了一种用于电感负载的全固态双极性LTD型脉冲电流发生器。首先,对该文提出的拓扑结构及原理进行介绍,详细分析了发生器在电感负载下的工作过程;然后,对发生器的硬件电路进行了设计与选型;最后,研制了一台4级全固态双极性LTD型脉冲电流发生器样机并对其进行性能测试。测试结果表明,该发生器可在电感负载下输出±800A的脉冲电流,电流的上升时间为600 ns;发生器的最高工作频率为10 kHz,并具备灵活的波形调制功能,能输出三角波、梯形波及阶梯波等多种波形。 展开更多
关键词 双极性直线变压器驱动 模块化全桥型多电平换流器 电感负载 波形调制 IGBT
下载PDF
基于双曲调频的组合波形设计研究
20
作者 贾耀君 蔡志明 王平波 《电子与信息学报》 EI CSCD 北大核心 2023年第12期4352-4360,共9页
主动声呐通常采用的单频或调频波形时频耦合分辨能力弱,不利于混响背景下的信号检测与估计。先前工作表明,“V”和“W”形双曲调频(HFM)组合波形可以实现距离-速度高分辨和低混响输出,其中W-HFM波形还有效解决了V-HFM波形在多目标场景... 主动声呐通常采用的单频或调频波形时频耦合分辨能力弱,不利于混响背景下的信号检测与估计。先前工作表明,“V”和“W”形双曲调频(HFM)组合波形可以实现距离-速度高分辨和低混响输出,其中W-HFM波形还有效解决了V-HFM波形在多目标场景中的虚假目标问题,但是设计复杂、运算量大。为优化HFM组合波形的设计和应用,该文推导了HFM组合波形的峰脊线斜率表达式。一方面提出V-HFM波形的最小无虚警距离(MNFAD)指标,分析了其多目标适用性;另一方面以典型的W-HFM波形为例,提出了优化的波形设计方案,对工程应用具有指导意义。水池实验数据表明,HFM组合波形实现了距离-速度高分辨、混响输出降低5 dB以上,并且W-HFM波形还抑制了虚假目标干扰。 展开更多
关键词 主动声呐 波形设计 双曲调频组合波形 V-HFM W-HFM
下载PDF
上一页 1 2 15 下一页 到第
使用帮助 返回顶部