On December 26, 2009, in the main control room of Shanghai Fengxian Converter Station, the voltage value on the screen rose from zero to 800 kV. This represented the demonstrative ±800-kV
During maintainability demonstration,the maintenance time for complex systems consisting of mixed technologies generally conforms to a mixture distribution.However existing maintainability standards and guidance do no...During maintainability demonstration,the maintenance time for complex systems consisting of mixed technologies generally conforms to a mixture distribution.However existing maintainability standards and guidance do not explain explicitly how to deal with this situation.This paper develops a comprehensive maintainability demonstration method for complex systems with a mixed maintenance time distribution.First of all,a K-means algorithm and an expectation-maximization(EM)algorithm are used to partition the maintenance time data for all possible clusters.The Bayesian information criterion(BIC)is then used to choose the optimal model.After this,the clustering results for equipment are obtained according to their degree of membership.The degree of similarity for the maintainability of different kinds of equipment is then determined using the projection method.By using a Bootstrap method,the prior distribution is obtained from the maintenance time data for the most similar equipment.Then,a test method based on Bayesian theory is outlined for the maintainability demonstration.Finally,the viability of the proposed approach is illustrated by means of an example.展开更多
Virtual testability demonstration test has many advantages,such as low cost,high efficiency,low risk and few restrictions.It brings new requirements to the fault sample generation.A fault sample simulation approach fo...Virtual testability demonstration test has many advantages,such as low cost,high efficiency,low risk and few restrictions.It brings new requirements to the fault sample generation.A fault sample simulation approach for virtual testability demonstration test based on stochastic process theory is proposed.First,the similarities and differences of fault sample generation between physical testability demonstration test and virtual testability demonstration test are discussed.Second,it is pointed out that the fault occurrence process subject to perfect repair is renewal process.Third,the interarrival time distribution function of the next fault event is given.Steps and flowcharts of fault sample generation are introduced.The number of faults and their occurrence time are obtained by statistical simulation.Finally,experiments are carried out on a stable tracking platform.Because a variety of types of life distributions and maintenance modes are considered and some assumptions are removed,the sample size and structure of fault sample simulation results are more similar to the actual results and more reasonable.The proposed method can effectively guide the fault injection in virtual testability demonstration test.展开更多
This paper presents the field test of our first demonstration cluster with five base stations (BTS) on code division multiple access (CDMA) wireless communication in China, while each BTS was installed with a high tem...This paper presents the field test of our first demonstration cluster with five base stations (BTS) on code division multiple access (CDMA) wireless communication in China, while each BTS was installed with a high temperature superconductor (HTS) receiver. The HTS receivers have the same centre frequency of 830 MHz, a bandwidth of 13 MHz, and a noise figure (NF) of 0.9 dB. After the conventional receivers in the BTSs were replaced by the HTS receivers, a consequent drive test was carried out. A 2.35 dB decrease of the mean mobile transmit power was observed in the demonstration cluster.展开更多
文摘On December 26, 2009, in the main control room of Shanghai Fengxian Converter Station, the voltage value on the screen rose from zero to 800 kV. This represented the demonstrative ±800-kV
基金supported by the National Defense Pre-research Funds(9140A27010215JB34422)
文摘During maintainability demonstration,the maintenance time for complex systems consisting of mixed technologies generally conforms to a mixture distribution.However existing maintainability standards and guidance do not explain explicitly how to deal with this situation.This paper develops a comprehensive maintainability demonstration method for complex systems with a mixed maintenance time distribution.First of all,a K-means algorithm and an expectation-maximization(EM)algorithm are used to partition the maintenance time data for all possible clusters.The Bayesian information criterion(BIC)is then used to choose the optimal model.After this,the clustering results for equipment are obtained according to their degree of membership.The degree of similarity for the maintainability of different kinds of equipment is then determined using the projection method.By using a Bootstrap method,the prior distribution is obtained from the maintenance time data for the most similar equipment.Then,a test method based on Bayesian theory is outlined for the maintainability demonstration.Finally,the viability of the proposed approach is illustrated by means of an example.
基金National Natural Science Foundation of China(51105369)
文摘Virtual testability demonstration test has many advantages,such as low cost,high efficiency,low risk and few restrictions.It brings new requirements to the fault sample generation.A fault sample simulation approach for virtual testability demonstration test based on stochastic process theory is proposed.First,the similarities and differences of fault sample generation between physical testability demonstration test and virtual testability demonstration test are discussed.Second,it is pointed out that the fault occurrence process subject to perfect repair is renewal process.Third,the interarrival time distribution function of the next fault event is given.Steps and flowcharts of fault sample generation are introduced.The number of faults and their occurrence time are obtained by statistical simulation.Finally,experiments are carried out on a stable tracking platform.Because a variety of types of life distributions and maintenance modes are considered and some assumptions are removed,the sample size and structure of fault sample simulation results are more similar to the actual results and more reasonable.The proposed method can effectively guide the fault injection in virtual testability demonstration test.
基金Supported by the National Natural Science Foundation of China (Grant No. 60471001)
文摘This paper presents the field test of our first demonstration cluster with five base stations (BTS) on code division multiple access (CDMA) wireless communication in China, while each BTS was installed with a high temperature superconductor (HTS) receiver. The HTS receivers have the same centre frequency of 830 MHz, a bandwidth of 13 MHz, and a noise figure (NF) of 0.9 dB. After the conventional receivers in the BTSs were replaced by the HTS receivers, a consequent drive test was carried out. A 2.35 dB decrease of the mean mobile transmit power was observed in the demonstration cluster.
