This article deals with the investigation of the effects of seismic impacts on the design and dimensioning of structures in South Kivu. The starting point is the observation of an ambivalence that can be observed in t...This article deals with the investigation of the effects of seismic impacts on the design and dimensioning of structures in South Kivu. The starting point is the observation of an ambivalence that can be observed in the province, namely the non-consideration of seismic action in the study of structures by both professionals and researchers. The main objective of the study is to show the importance of dynamic analysis of structures in South Kivu. It adopts a meta-analytical approach referring to previous researches on South Kivu and proposes an efficient and optimal method. To arrive at the results, we use Eurocode 7 and 8. In addition, we conducted static analysis using the Coulomb method and dynamic analysis using the Mononobe-Okabe method and compared the results. At Nyabibwe, the results showed that we have a deviation of 24.47% for slip stability, 12.038% for overturning stability and 9.677% for stability against punching through a weight wall.展开更多
The single and coupled photonic crystal nanocavity lasers are fabricated in the InGaAsP material system and their static and dynamic features are compared. The coupled-cavity lasers show a larger lasing e^ciency and g...The single and coupled photonic crystal nanocavity lasers are fabricated in the InGaAsP material system and their static and dynamic features are compared. The coupled-cavity lasers show a larger lasing e^ciency and generate an output power higher than the single-cavity lasers, results that are consistent with the theoretical results obtained by rate equations. In dynamic regime, the single-cavity lasers produce pulses as short as 113 ps, while the coupled-cavity lasers show a significantly longer lasing duration. These results indicate that the photonic crystal laser is a promising candidate for the light source in high-speed photonic integrated circuit.展开更多
为明确并提升承插式拼装桥墩抵抗压弯扭等复合荷载的能力,提出了一种结合灌浆套筒和承插口组合连接的新型承插装配式墩,通过复合荷载作用下的拟静力试验对比了现浇(reinforced concrete,RC)、灌浆套筒(grouting and sleeve,GS)、承插口(...为明确并提升承插式拼装桥墩抵抗压弯扭等复合荷载的能力,提出了一种结合灌浆套筒和承插口组合连接的新型承插装配式墩,通过复合荷载作用下的拟静力试验对比了现浇(reinforced concrete,RC)、灌浆套筒(grouting and sleeve,GS)、承插口(socket with ultra-high performance concrete,SU)和结合套筒连接钢筋的新型承插(grouting sleeve and socket with ultra-high performance concrete,GSU)连接拼装桥墩的损伤机理和滞回性能,结合有限元模型重点讨论了承插口深度对滞回性能的影响。结果表明:4个构件的破坏模式都是以受弯破坏为主的弯扭破坏,其中SU构件出现了轻微拔起的现象,而对应的GSU构件并未出现该现象,与RC构件接近;各构件的剪力-墩顶位移骨架发展趋势比较一致,由于GSU构件纵向钢筋连续,具有更好的整体性能,其抗弯承载力与RC构件接近,且明显大于SU和GS构件,4个构件弯曲滞回耗能较为接近;承插口深度为1.0倍截面宽度的GSU构件抗扭承载力略高于RC构件,且明显大于其余装配式墩,GSU构件的扭转刚度、延性系数和耗能能力均大于其他3个墩;当承插口深度采用0.5倍构件截面宽度时,新型承插GSU构件的抗弯和抗扭承载力均略高于整体现浇构件,具有良好的抵抗压弯扭荷载的能力,可以实现浅承插口连接。研究结果可为压弯扭复合作用下装配式墩的应用提供试验依据。展开更多
文摘This article deals with the investigation of the effects of seismic impacts on the design and dimensioning of structures in South Kivu. The starting point is the observation of an ambivalence that can be observed in the province, namely the non-consideration of seismic action in the study of structures by both professionals and researchers. The main objective of the study is to show the importance of dynamic analysis of structures in South Kivu. It adopts a meta-analytical approach referring to previous researches on South Kivu and proposes an efficient and optimal method. To arrive at the results, we use Eurocode 7 and 8. In addition, we conducted static analysis using the Coulomb method and dynamic analysis using the Mononobe-Okabe method and compared the results. At Nyabibwe, the results showed that we have a deviation of 24.47% for slip stability, 12.038% for overturning stability and 9.677% for stability against punching through a weight wall.
基金Supported by the National Key Basic Research Special Fund/CNKBRSF of China under Grant Nos 2012CB933501,2016YFA0301102,2016YFB0401804 and 2016YFB0402203the National Natural Science Foundation of China under Grant Nos61535013,61321063 and 61137003+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences under Grant Nos XDB24010100,XDB24010200,XDB24020100 and XDB24030100the One Hundred Person Project of the Chinese Academy of Sciences
文摘The single and coupled photonic crystal nanocavity lasers are fabricated in the InGaAsP material system and their static and dynamic features are compared. The coupled-cavity lasers show a larger lasing e^ciency and generate an output power higher than the single-cavity lasers, results that are consistent with the theoretical results obtained by rate equations. In dynamic regime, the single-cavity lasers produce pulses as short as 113 ps, while the coupled-cavity lasers show a significantly longer lasing duration. These results indicate that the photonic crystal laser is a promising candidate for the light source in high-speed photonic integrated circuit.
文摘为明确并提升承插式拼装桥墩抵抗压弯扭等复合荷载的能力,提出了一种结合灌浆套筒和承插口组合连接的新型承插装配式墩,通过复合荷载作用下的拟静力试验对比了现浇(reinforced concrete,RC)、灌浆套筒(grouting and sleeve,GS)、承插口(socket with ultra-high performance concrete,SU)和结合套筒连接钢筋的新型承插(grouting sleeve and socket with ultra-high performance concrete,GSU)连接拼装桥墩的损伤机理和滞回性能,结合有限元模型重点讨论了承插口深度对滞回性能的影响。结果表明:4个构件的破坏模式都是以受弯破坏为主的弯扭破坏,其中SU构件出现了轻微拔起的现象,而对应的GSU构件并未出现该现象,与RC构件接近;各构件的剪力-墩顶位移骨架发展趋势比较一致,由于GSU构件纵向钢筋连续,具有更好的整体性能,其抗弯承载力与RC构件接近,且明显大于SU和GS构件,4个构件弯曲滞回耗能较为接近;承插口深度为1.0倍截面宽度的GSU构件抗扭承载力略高于RC构件,且明显大于其余装配式墩,GSU构件的扭转刚度、延性系数和耗能能力均大于其他3个墩;当承插口深度采用0.5倍构件截面宽度时,新型承插GSU构件的抗弯和抗扭承载力均略高于整体现浇构件,具有良好的抵抗压弯扭荷载的能力,可以实现浅承插口连接。研究结果可为压弯扭复合作用下装配式墩的应用提供试验依据。
