Comparative study on three dynamic modulus of elasticity and static modulus of elasticity for Lodgepole pine lumber

The dynamic and static modulus of elasticity （MOE） between bluestained and non-bluestained lumber of Lodgepole pine were tested and analyzed by using three methods of Non-destructive testing （NDT）, Portable Ultrasonic Non-destructive Digital Indicating Testing （Pundit）, Metriguard and Fast Fourier Transform （FFT） and the normal bending method. Results showed that the dynamic and static MOE of bluestained wood were higher than those of non-bluestained wood. The significant differences in dynamic MOE and static MOE were found between bulestained and non-bluestained wood, of which, the difference in each of three dynamic MOE （Ep. the ultrasonic wave modulus of elasticity, Ems, the stress wave modulus of elasticity and El, the longitudinal wave modulus of elasticity） between bulestained and non-bluestained wood arrived at the 0.01 significance level, whereas that in the static MOE at the 0.05 significance level. The differences in MOE between bulestained and non-bluestained wood were induced by the variation between sapwood and heartwood and the different densities of bulestained and non-bluestained wood. The correlation between dynamic MOE and static MOE was statistically significant at the 0.01 significance level. Although the dynamic MOE values of Ep, Em, Er were significantly different, there exists a close relationship between them （arriving at the 0.01 correlation level）. Comparative analysis among the three techniques indicated that the accurateness of FFT was higher than that of Pundit and Metriguard. Effect of tree knots on MOE was also investigated. Result showed that the dynamic and static MOE gradually decreased with the increase of knot number, indicating that knot number had significant effect on MOE value.

Assessment of flexural properties of different grade dimension lumber by ultrasonic technique

The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber grades authority （NLGA） for structure light framing and structure joists and planks. The properties of apparent density was determined at 15% moisture content, bending strength and stiffness were tested according to American Society for Testing and Materials （ASTM） D198-99, and dynamic modulus of elasticity （Eusw） was measured by ultrasonic technique, for predicting the flexural properties of different grade lumbers. The results showed that Eosw was larger than the static MOE. The relationship between Eusw and static MOE was significant at 0.01 level, and the determination coefficients （R2） of the four grade lumbers followed the sequence as R^2No.2 （0.616）〉 R^2ss （0.567）〉 R^2No1 （0.366）〉 R^2No.3 （0.137）. The R^2 of Fusw and MOR were lower than that of the Etru and MOR for each grade. The Eusw of all the grade lumbers, except No.3-grade, had significant correlation with the static MOE and MOR, thus the bending strengthof those grade lumbers can be estimated by the E The Etru valuesof four grade lumbers followed a sequence as No.2-grade （10.701 GPa） 〉 SS-grade （10.359 GPa） 〉 No.l-grade （9.840 GPa） 〉 No.3-grade （9.554 GPa）. For the same grade dimension lumber, its Eusw value was larger than static MOE. Mean values of MOR for four grade lumbers follow a sequence as No.2-grade （48.67 MPa） 〉 SS-grade （48.16 MPa） 〉 No.3-grade （46.55 MPa） 〉 No. 1-grade （43.39MPa）.

Application of finite element analysis in properties test of finger-jointed lumber

Finger-jointed lumber production has now become the most extensively used method for spliced lumbers jointing together endwise.The properties of finger-jointed lumber are affected by many different factors such as the end-pressure.The main mechanical properties to be tested for struc-tural use finger-jointed lumber include the modulus of elasticity in static bending and the bending strength.The most commonly used method for testing these properties at present is the experi-mental test.In this study,we used finite element method to investigate the end-pressure range,the modulus of elasticity in static bending and the bending strength for Pinus sylvistriv var.finger-jointed lumber under three different fitness ratios(0 mm,0.1 mm,0.3 mm).With finite element analysis(FEA)modelling results compared with the experimental test results,it is possible to find the relationship between these two kinds of results and use the FEA to predict the properties of finger-jointed lumber.The FEA applied in the end pressure tests showed a narrower range com-pared with the modelling results.It indicated that the FEA could be used in the prediction of the end pressure for finger-jointed lumber.The modelling results for modulus of elasticity(MOE)test and bending strength(MOR)test showed about 20%discrepancies compared with the experimen-tal results.Moreover,the MOE modelling results showed the same trend as experimental results under three different fitness levels while the MOR modelling results showed the different trend.It can be concluded that the FEA is a feasible way in analysing the properties of finger-jointed lumber if the errors could be eliminated properly.Some modifications should be made in order to realize the prediction of the properties of finger-jointed lumber more accurately.