Static recrystallization behavior of 25CrMo4 mirror plate steel during two-pass hot deformation

The static recrystallization behavior of 25CrMo4 mirror plate steel has been determined by hot compression testing on a Gleeble 1500 thermal mechanical simulation tester. Compression tests were performed using double hit schedules at temperatures of 950-- 1 150 ~C, strain rates of 0.01--0.5 s-1 , and recrystallization time of 1--100 s. Results show that the kinetics of static recrystallization and the microstructural evolution were greatly influenced by the deformation parameters （deformation temperature, strain rate and pre strain） and the initial austenite grain size. Based on the experimental results, the kinetics model of static recrystallization has been generated and the comparison between the experimental results and the predicted results has been carried out. It is shown that the predicted results were in good agreement with the experimental results.

Microstructural evolution of a superaustenitic stainless steel during a two-step deformation process

Single-and two-step hot compression experiments were carried out on 16Cr25Ni6Mo superaustenitic stainless steel in the temperature range from 950 to 1150°C and at a strain rate of 0.1 s^（-1）. In the two-step tests, the first pass was interrupted at a strain of 0.2; after an interpass time of 5, 20, 40, 60, or 80 s, the test was resumed. The progress of dynamic recrystallization at the interruption strain was less than 10%. The static softening in the interpass period increased with increasing deformation temperature and increasing interpass time. The static recrystallization was found to be responsible for fast static softening in the temperature range from 950 to 1050°C. However, the gentle static softening at 1100 and 1150°C was attributed to the combination of static and metadynamic recrystallizations. The correlation between calculated fractional softening and microstructural observations showed that approximately 30% of interpass softening could be attributed to the static recovery. The microstructural observations illustrated the formation of fine recrystallized grains at the grain boundaries at longer interpass time. The Avrami kinetics equation was used to establish a relationship between the fractional softening and the interpass period. The activation energy for static softening was determined as 276 kJ/mol.

Static Recrystallization Behavior of SA508-III Steel during Hot Deformation

The static recrystallization behavior of SA508-III steel was investigated by isothermal double-hit hot compression tests at the deformation temperature of 950-1 250 ℃,the strain rate of 0. 01-1 s^（-1）,and the inter-pass time of 1-300 s.The effects of deformation parameters,including forming temperature,strain rate,degree of deformation（ pre-strain） and initial austenite grain size,on the softening kinetics were analyzed. Experimental results show that static recrystallization kinetics is strongly dependent on deformation temperature and degree of deformation,while less affected by the strain rate and initial grain size. The kinetics and microstructural evolution equations of static recrystallization for SA508-III steel were developed to predict the softening behavior and the statically recrystallized grain size,respectively. Based on the comparison between the experimental and predicted results,it is found that the established equations can give a reasonable estimate of the static softening behavior for SA508-III steel.