An Improved Algorithm of Grounding Grids Corrosion Diagnosis Based on Total Least Square Method

A new model considering corrosion property for grounding grids diagnosis is proposed,which provides reference solutions of ambiguous branches.The constraint total least square method based on singular value decomposition is adopted to improve the effectiveness of grounding grids' diagnosis algorithm.The improvement can weaken the influence of the model's error,which results from the differences between design paper and actual grid.Its influence on touch and step voltages caused by the interior resistance of conductors is taken into account.Simulation results show the validity of this approach.

A Method for Rapidly Determining the Optimal Distribution Locations of GNSS Stations for Orbit and ERP Measurement Based on Map Grid Zooming and Genetic Algorithm

Designing the optimal distribution of Global Navigation Satellite System(GNSS)ground stations is crucial for determining the satellite orbit,satellite clock and Earth Rotation Parameters(ERP)at a desired precision using a limited number of stations.In this work,a new criterion for the optimal GNSS station distribution for orbit and ERP determination is proposed,named the minimum Orbit and ERP Dilution of Precision Factor(OEDOP)criterion.To quickly identify the specific station locations for the optimal station distribution on a map,a method for the rapid determination of the selected station locations is developed,which is based on the map grid zooming and heuristic technique.Using the minimum OEDOP criterion and the proposed method for the rapid determination of optimal station locations,an optimal or near-optimal station distribution scheme for 17 newly built BeiDou Navigation Satellite System(BDS)global tracking stations is suggested.To verify the proposed criterion and method,real GNSS data are processed.The results show that the minimum OEDOP criterion is valid,as the smaller the value of OEDOP,the better the precision of the satellite orbit and ERP determination.Relative to the exhaustive method,the proposed method significantly improves the computational efficiency of the optimal station location determination.In the case of 3 newly built stations,the computational efficiency of the proposed method is 35 times greater than that of the exhaustive method.As the number of stations increases,the improvement in the computational efficiency becomes increasingly obvious.

An Investigation into Substation Grounding and Its Implementation on Gaza Substation

An investigation into the optimal design of a substation grounding system for the transmission substation in Gaza City, Palestine has been carried out. A research into the most influential parameters on the effectiveness of the substation grid system has been performed and its results have been incorporated into the Gaza case study. Through modelling and simulating the power station in Gaza while considering some field data, an optimal substation grounding grid has been designed and has shown complete conformance to safety. It is thus considered that such a design will protect personnel in any area of the substation in addition to the installed machinery if the largest possible fault current was to traverse the earth.

Comparative Analysis of Equal and Unequal Grounding Grid Configurations by Compression Ratio and Least Square Curve Fitting Techniques

The primary aim of the power system grounding is to safeguard the person and satisfying the performance of the power systemtomaintain reliable operation.With equal conductor spacing grounding grid design,the distribution of the current in the grid is not uniform.Hence,unequal grid conductor span in which grid conductors are concentrated more at the periphery is safer to practice than equal spacing.This paper presents the comparative analysis of two novel techniques that create unequal spacing among the grid conductors:the least-square curve fitting technique and the compression ratio techniquewith equal grid configuration for both square and rectangular grids.Particle Swarm Optimization(PSO)is adopted for finding out one optimal feasible solution among many feasible solutions of equal grid configuration for both square and rectangular grids.Comparative analysis is also carried out between square and rectangular grids using the least square curve fitting technique as it results in only one unequal grid configuration.Simulation results are obtained by theMATLAB software developed.Percentage of improvement in ground potential rise,step voltage,touch voltage,and grid resistancewith variation in compression ratios are plotted.

Research on Magnetically Coupled Resonant Detection Method for Breakpoint of Four Mesh Grounding Grid

Magnetically coupled resonant technology is a novel method for solving the breakpoint locating of power grounding grid.But the method can only detect breakpoints of a single mesh grounding grid at present.In this paper,a magnetically coupled resonant detection method for four-hole grounding grid breakpoint is proposed.Firstly,the equivalent circuit model of the four mesh grounding grid with two types of breakpoints,namely edge branch and intermediate branch,is established.The input impedance and phase angle of the system are obtained by analyzing the equivalent capacitance and equivalent resistance in the model.Secondly,the magnetically coupled resonant physical process of grounding grid faults is solved via HFSS software.The magnetic field intensity and phase frequency characteristic curves of four mesh holes with different branches and positions of breakpoints and different corrosion degrees are studied,and an experimental system is built to verify the feasibility.The results show that under the condition of grounding grid buried depth of 0.5 m and input frequency of 1~15MHz,and there is an inverse relationship between equivalent capacitance and distortion frequency,the phase angle is positively correlated with the degree of corrosion of grounding grid,and the error of signal distortion frequency can be positioned at 5%.This paper provides some ideas for the application of magnetic coupling grounding grid detection technology.

Treatment design of geological defects in dam foundation of Jinping I hydropower station

Jinping I hydropower station is one of the most challenging projects in China due to its highest arch dam and complex geological conditions for construction.After geological investigation into the dam foundation,a few large-scale weak discontinuities are observed.The rock masses in the left dam foundation are intensively unloaded,approximately to the depth of 150–300 m.These serious geological defects lead to a geological asymmetry on the left and right banks,and thus some major diffculties of dam construction are encountered.In this paper,the influences of geological defects on the project are analyzed,followed by the concepts and methods of treatment design.Based on the analysis,the treatment methods of the weak rock masses and discontinuities are carefully determined,including the concrete cushion,concrete replacement grids,and consolidation grouting.They work together to enhance the strength and integrity of the dam foundation.Evaluations and calibrations through geo-mechanical model tests in combination with feld monitoring results in early impoundment period show that the arch dam and its foundation are roughly stable,suggesting that the treatment designs are reasonable and effective.The proposed treatment methods and concepts in the context can be helpful for similar complex rock projects.

Analysis of Design Directions for Ground Control Station (GCS)

This study is a preparation phase for integrated visualization of battlefield situation. To develop the ground control station for unmanned systems, many factors have to be considered from the design stages, such as layout, information component, representation scheme, and human operation methods. Considering such many factors can be very difficult, hence we conducted an in-depth investigation of design factors from major UAV stations around the world. We analyzed the design characteristics and the specifics. In conclusion, we were able to derive some common aspects of design characteristics, which lead to the successful design approach.

Feasibility evaluation for excavation of Naghshe Jahan Square subway station by underground methods

In recent years, in reaction to the increasing usage of urban areas, the excavation of underground spaces has been developed. One of the most challenging issues encountered by engineers is the construction of subway stations as large underground spaces at shallow depth with soft surrounding soils. In this paper, Naghshe Jahan Square subway station located in Isfahan, Iran, has been simulated by geomechanical fnite difference method(FDM). This station is located under important historical structures. Therefore, the ground displacement and surface settlement induced by the excavation of the subway station should be strictly controlled. Many of such problems are affected by selected excavation method. For these reasons, different underground excavation methods associated with construction have been studied. In this study, sequential excavation method and large-diameter curved pipe roofng method are used and the numerical results of the two methods are compared. The presence of groundwater table obliges us to choose special techniques for the stability of the ground around the subway station during construction; hence compressed air and ground freezing techniques are utilized in the simulations of the subway station. Finally, after choosing appropriate support systems, the large-diameter curved pipe roofng method with 1.5 m spacing between curved pipes is proposed.

Variability and Long-Term Trend of Total Cloud Cover in China Derived from ISCCP, ERA-40, CRU3, and Ground Station Datasets

Total Cloud Cover （TCC） over China deter- mined from four climate datasets including the Interna- tional Satellite Cloud Climatology Project （ISCCP）, the 40-year Re-Analysis Project of the European Centre for Medium-Range Weather Forecasts （ERA-40）, Climate Research Unit Time Series 3.0 （CRU3）, and ground sta- tion datasets are used to show spatial and temporal varia- tion of TCC and their differences. It is demonstrated that the four datasets show similar spatial pattern and seasonal variation. The maximum value is derived from ISCCE TCC value in North China derived from ERA-40 is 50% larger than that from the station dataset; however, the value is 50% less than that in South China. The annual TCC of ISCCP, ERA-40, and ground station datasets shows a decreasing trend during 1984-2002; however, an increasing trend is derived from CRU3. The results of this study imply remarkable differences of TCC derived from surface and satellite observations as well as model simu- lations. The potential effects of these differences on cloud climatology and associated climatic issues should be carefully considered.

Space Research Plan of China's Space Station

China's manned spaceflight missions have been introduced briefly,and the research planning of space sciences for China's Space Station(CSS) has been presented with the topics in the research areas,including:life science and biotechnology,microgravity fluid physics and combustion science,space material science,fundamental physics,space astronomy and astrophysics,earth sciences and application,space physics and space environment,experiments of new space technology.The research facilities,experiment racks,and supporting system planned in CSS have been described,including:multifunctional optical facility,research facility of quantum and optic transmission,and a dozen of research racks for space sciences in pressurized module,etc.In the next decade,significant breakthroughs in space science and utilization will hopefully be achieved,and great contributions will be made to satisfy the need of the social development and people's daily life.

First large charging station with typical design put into operation

On March 31, in accordance with the typical design requirements of the State Grid, the f irst large electric vehicle (EV) charging station, built by the North China Grid,

Development of ground control station and path planning for autonomous MUAV

For autonomous MUAV,the Ground Control Station(GCS)including hardware and modular software programming such as control modular,navigation modular,display modular and monitor modular becomes important equipment to be developed.This paper emphasizes the global planning and the local replanning arithmetic based on three-dimensional velocity potential field for the moving threats.During the test on the ground and in the sky,GCS show the remote sensing information precisely and send the control command in time.The system can be used to assist in the function of autonomous complex task for MUAV.

A Path-Based Approach for Data Aggregation in Grid-Based Wireless Sensor Networks

Sensor nodes in a wireless sensor network （WSN） are typically powered by batteries, thus the energy is constrained. It is our design goal to efficiently utilize the energy of each sensor node to extend its lifetime, so as to prolong the lifetime of the whole WSN. In this paper, we propose a path-based data aggregation scheme （PBDAS） for grid-based wireless sensor networks. In order to extend the lifetime of a WSN, we construct a grid infrastructure by partitioning the whole sensor field into a grid of cells. Each cell has a head responsible for aggregating its own data with the data sensed by the others in the same cell and then transmitting out. In order to efficiently and rapidly transmit the data to the base station （BS）, we link each cell head to form a chain. Each cell head on the chain takes turn becoming the chain leader responsible for transmitting data to the BS. Aggregated data moves from head to head along the chain, and finally the chain leader transmits to the BS. In PBDAS, only the cell heads need to transmit data toward the BS. Therefore, the data transmissions to the BS substantially decrease. Besides, the cell heads and chain leader are designated in turn according to the energy level so that the energy depletion of nodes is evenly distributed. Simulation results show that the proposed PBDAS extends the lifetime of sensor nodes, so as to make the lifetime of the whole network longer.

Grounding Locations Assessment of Practical Power System

Grounding Points (GPs) are installed in electrical power system to drive protective devices and accomplish the person nel safety. The general grounding problem is to find the optimal locations of these points so that the security and reli ability of power system can be improved. This paper presents a practical approach to find the optimal location of GPs based on the ratios of zero sequence reactance with positive sequence reactance (X0/X1), zero sequence resistance with positive sequence reactance (R0/X1) and Ground Fault Factor (GFF). The optimal values of these indicators were deter-mined by considering several scenarios of fault disturbances such as single line to ground on a selected area of the Iraqi National Grid (132 KV) taking into account the statue of GPs for transformers in the other substations. From the presented results in this paper, it is noted that GFF calculated for some substations could be used to measure the effectiveness of GPs. However, the operated time of relay can be taken as a criterion of this measurement for selecting the best location of GPs.

Rain Attenuation Impact on Performance of Satellite Ground Stations for Low Earth Orbiting (LEO) Satellites in Europe

Low Earth Orbits (LEO) satellites are used for public communication and for scientific purposes. These satellites provide opportunities for investigations for which alternative techniques are either difficult or impossible to apply. Ground stations have to be established in order to communicate with such satellites. Usually these satellites communicate with ground stations at S-band. The communication quality depends on the performance of the satellite ground station, in addition to that of satellite. The performance of the satellite ground stations is expressed through Figure of Merit. The aim of this paper is to analyze the rain attenuation impact on the performance of the respective ground station. Rain attenuation depends on geographical location where the satellite ground station is implemented. In order to compare this effect on satellite ground station performance, some cities of Europe are considered. Finally, the rain attenuation impact on the satellite ground station Figure of Merit for the hypothetical satellite ground station installed in Prishtina is analyzed.

Establishment and analysis of global gridded Tm-Ts relationship model

In ground-based GPS meteorology, Tm is a key parameter to calculate the conversion factor that can convert the zenith wet delay（ZWD） to precipitable water vapor（PWV）. It is generally acknowledged that Tm is in an approximate linear relationship with surface temperature Ts, and the relationship presents regional variation. This paper employed sliding average method to calculate correlation coefficients and linear regression coefficients between Tm and Ts at every 2°× 2.5° grid point using Ts data from European Centre for Medium-Range Weather Forecasts（ECMWF） and Tm data from ＂GGOS Atmosphere＂, yielding the grid and bilinear interpolation-based Tm Grid model. Tested by Tm and Ts grid data, Constellation Observation System of Meteorology, Ionosphere, and Climate（COSMIC） data and radiosonde data, the Tm Grid model shows a higher accuracy relative to the Bevis Tm-Ts relationship which is widely used nowadays. The Tm Grid model will be of certain practical value in high-precision PWV calculation.

Design of Ground Control Station for Operation of Multiple Combat Entities

Recently, if you look at the trend of the Unmanned Combat Entities (UCE) on the world that are actually operational, a large number of personnel per one UCE has been operating the GCS. However, UCEs to perform the attack/reconnaissance mission are very expensive assets and require a considerable amount of time to train for UCE operations. Accordingly, the future battlefield environment has become important to develop multiple UCE ground control station. In this study, we developed a multiple UCE GCS that one operator can operate up to four UCEs. The software was built with a total of 6 displays using a Lockheed Martin Corporation’s prepar3D. Scenario of research takes into account the operation of the South Korea-type future multiple UCEs, to take advantage of the simulation system, in this paper, we propose for each of the concepts and technologies.

内蒙古地区强震动台站背景噪声与数据质量分析

计算了内蒙古地区193个强震动台站2022年连续观测数据的加速度功率谱密度,通过绘制不同时空、不同加速度计、不同频段的功率谱密度和功率谱概率密度函数图及背景噪声速度均方根值分布图,评估了该区强震动台站的背景噪声变化特征,对出现的功率谱密度异常进行了具体分析,并针对强震动台站数据异常检测及处理提出了相应的建议。研究结果显示:不同加速度计、不同时空强震动台站的背景噪声功率谱密度昼夜差异主要体现在1 Hz以上频段,且不同区域的昼夜差异变化较大;QA-2g型、JS-A2型和TDA-33M型三种加速度计在2 s频点的背景噪声功率谱密度随区域和三分向变化较小;从强震动台站2 s频点背景噪声的监控能得到可靠的观测数据异常,数据异常主要由加速度计零点漂移大、加速度计故障、脉冲干扰、系统参数有误造成,建议优化站点观测环境,进一步规范仪器安装、调试及JOPENS系统的参数配置和审核。