Shaking table test and numerical analysis of a 1:12 scale model of a special concentrically braced steel frame with pinned connections

This paper describes shaking table tests of a 1：12 scale model of a special concentrically braced steel frame with pinned connections, which was fabricated according to a one-bay braced frame selected from a typical main factory building of a large thermal power plant. In order to investigate the seismic performance of this type of structure, several ground motion accelerations with different levels for seismic intensity Ⅷ, based on the Chinese Code for Seismic Design of Buildings, were selected to excite the model. The results show that the design methods of the members and the connections are adequate and that the structural system will perform well in regions of high seismicity. In addition to the tests, numerical simulations were also conducted and the results showed good agreement with the test results. Thus, the numerical model is shown to be accurate and the beam element can be used to model this structural system.

Peak displacement patterns for the performance-based seismic design of steel eccentrically braced frames

Performance-based seismic design(PBSD) aims to assess structures at different damage states. Since damage can be directly associated to displacements, seismic design with consideration of displacement seems to be logical. In this study, simple formulae to estimate the peak floor displacement patterns of eccentrically braced frames(EBFs) at different performance levels subjected to earthquake ground motions are proposed. These formulae are applicable in a PBSD and especially in direct displacement-based design(DDBD). Parametric study is conducted on a group of 30 EBFs under a set of 15 far field and near field accelerograms which they scaled to different amplitudes to adapt various performance levels. The results of thousands of nonlinear dynamic analyses of EBFs have been post-processed by nonlinear regression analysis in order to recognize the major parameters that influence the peak displacement pattern of these frames. Results show that suggested displacement patterns have relatively good agreement with those acquired by an exact nonlinear dynamic analysis.

Optimization of design parameters for controlled rocking steel braced dual-frames

A controlled rocking concentrically steel braced frame(CR-CSBF)is introduced as an alternative to conventional methods to prevent major structural damage during large earthquakes.It is equipped with elastic post-tensioned(PT)cables and replaceable devices or fuses to provide overturning resistance and dissipate energy,respectively.Although CR-CSBFs are not officially legalized in globally valid codes for new buildings,it is expected to be presented in them in the near future.The main goal of this study is to determine the optimal design parameters consist of the yield strength and modulus of elasticity of the fuse,the initial force of the PT cable,and the gravity load on the rocking column,considering different heights of the frame,spanning ratios and ground motion types for dual-configuration CR-CSBF.Nonlinear time-history analyses are performed in OpenSees.This study aims to define the optimal input variables as effective design parameters of CR-CSBFs by comparing four seismic responses consisting of story drift,roof displacement,roof acceleration and base shear,and also using the Euclidean metric optimization method.Despite the previous research,this study is innovative and first of its kind.The results demonstrate that the optimal design parameters are variable for various conditions.

Seismic response of high-rise steel framed buildings with Chevron-braced designed according to Venezuelan codes

The object of this study is to determine the seismic response of regular high-rise steel buildings with chevron-braced frames. Mechanics models of three buildings of 14, 18 and 20 stories are studied, all of them with similar geometric characteristics in plant and elevation. These models are realized using prescriptions and parameters from venezuelan design codes. The seismic action is carry on through varius synthetic design spectrum compatible accelerograms defined by the seismic codes in this study, with three levels of intensity corresponding to three specific Limit States. Dynamic analysis is used to compute parameters of ductility, over strength and maximum displacements. From these results it can be concluded that chevron-braced frames presented a good overall performance and non V-braced frames show greater damage due to dynamic actions, validating non linear dynamic analysis as a very powerful tool to seismic-resistance design and chevron-braced frames as a very useful choice in improving the response of tall steel structures. since this lateral bracing system is absent from Venezuelan seismic codes.

Behavior of ductile steel X-braced RC frames in seismic zones

A satisfactory ductile performance of moment-resisting reinforced concrete concentric braced frame structures (RC-MRCBFs) is not warranted by only following the provisions proposed in Mexico’s Federal District Code (MFDC-04). The nonlinear behavior of low to medium rise ductile RC-MRCBFs using steel X-bracing susceptible to buckling is evaluated in this study. The height of the studied structures ranges from 4 to 20 stories and they were located for design in the lakebed zone of Mexico City. The design of RC-MRCBFs was carried out considering variable contribution of the two main lines of defense of the dual system (RC columns and steel braces). In order to observe the principal elements responsible for dissipating the earthquake input energy, yielding mappings for diff erent load-steps were obtained using both nonlinear static and dynamic analyses. Some design parameters currently proposed in MFDC-04 as global ductility capacities, overstrength reduction factors and story drifts corresponding to diff erent limit states were assessed as a function of both the considered shear strength and slenderness ratios for the studied RC-MRCBFs using pushover analyses. Additionally, envelopes of response maxima of dynamic parameters were obtained from the story and global hysteresis curves. Finally, a brief discussion regarding residual drifts, residual drift ratios, mappings of residual deformations in steel braces and residual rotations in RC beams and columns is presented. From the analysis of the obtained results, it is concluded that when a suitable design criterion is considered, good structural behavior of RC-MRCBFs with steel-X bracing can be obtained. It is also observed that the shear strength balance has an impact in the height-wise distribution of residual drifts, and an important “shake-down” eff ect is obtained for all cases. There is a need to improve design parameters currently proposed in MFDC to promote an adequate seismic performance of RC-MRCBFs.

Effectiveness of two conventional methods for seismic retrofit of steel and RC moment resisting frames based on damage control criteria

This study investigates the efficiency of two types of rehabilitation methods based on economic justification that can lead to logical decision making between the retrofitting schemes. Among various rehabilitation methods, concentric chevron bracing（CCB） and cylindrical friction damper（CFD） were selected. The performance assessment procedure of the frames is divided into two distinct phases. First, the limit state probabilities of the structures before and after rehabilitation are investigated. In the second phase, the seismic risk of structures in terms of life safety and financial losses（decision variables） using the recently published FEMA P58 methodology is evaluated. The results show that the proposed retrofitting methods improve the serviceability and life safety performance levels of steel and RC structures at different rates when subjected to earthquake loads. Moreover, these procedures reveal that financial losses are greatly decreased, and were more tangible by the application of CFD rather than using CCB. Although using both retrofitting methods reduced damage state probabilities, incorporation of a site-specific seismic hazard curve to evaluate mean annual occurrence frequency at the collapse prevention limit state caused unexpected results to be obtained. Contrary to CFD, the collapse probability of the structures retrofitted with CCB increased when compared with the primary structures.

高烈度区多层长悬挑钢结构设计

长安乐传媒港是十四届全运会重要配套项目,为南侧带3层大悬挑的不规则复杂结构,最大悬挑长度38.5m。主体结构采用钢结构框架-支撑体系,悬挑部分采用钢桁架结构。针对大悬挑结构设计难点开展了分析和研究;重点介绍了整体结构方案选型、结构整体分析结果以及结构抗震性能化设计结果;也重点介绍了单人行走激励和人群激励下悬挑钢桁架舒适度分析,考虑长悬挑结构安装过程、卸载顺序和楼板刚度形成次序的施工模拟分析,以及长悬挑对基础设计的影响。结果表明,本工程的多层长悬挑构结构具有较高的安全储备,整体结构具有良好抗震性能;长悬挑结构设计中需要特别关注施工过程的影响,基础设计时应考虑竖向构件受拉的不利影响。

四川大学博物馆结构设计重难点分析研究

四川大学博物馆采用钢框架结构体系,并设置屈曲约束支撑改善结构的抗震性能。介绍了四川大学博物馆的结构设计参数及抗震性能目标。针对结构设计中的重难点,开展了屈曲约束支撑的工作机理分析、框架柱计算长度与穿层柱分析、东侧大悬挑空间的相关分析。利用反应谱分析及时程分析探究了屈曲约束支撑工作机理,分析结果表明,屈曲约束支撑能够有效改善钢结构产生塑性铰的状况,起到保护主体钢框架的作用。针对东侧大悬挑空间的功能要求,设计采用了屋顶桁架结合钢拉杆吊挂东侧大楼梯的结构形式,通过结构防连续倒塌分析、楼板应力分析、楼盖舒适度分析、关键节点有限元分析等确保该部位结构设计安全合理。对整体结构受力机理和薄弱部位进行了研究,提出了重点部位的设计原则和加强措施。

钢支撑-钢筋混凝土掉层框架结构抗震性能试验研究

为改善坡地钢筋混凝土(RC)掉层框架结构抗侧刚度分布的不均匀性,设计了一栋在上接地层设置钢支撑的RC掉层框架结构,按1/4比例提取其顺坡向中榀框架下部5层子结构为试验对象,开展钢支撑-RC掉层框架拟静力试验,观测试件的破坏过程,并对比RC掉层框架试验所得试件的破坏形态,分析试件滞回性能、延性和刚度退化等抗震性能指标。结果表明:试件的最终破坏是以第4层柱底混凝土压溃,梁端混凝土剥落、底部钢筋断裂,顶层柱顶混凝土剥落为标志。与RC掉层框架试验结果相比,钢支撑-RC掉层框架试件上接地柱的破坏明显减轻,柱端破坏分布也更为均匀,避免了掉层框架结构“半层破坏模式”的出现,改善了结构的耗能和抗地震倒塌能力。但试件上接地层相邻上一层的变形和破坏程度较大,应对该楼层的柱端进行适当的抗震加强;设置钢支撑后,试件的滞回曲线较为饱满,并具有良好的延性(正、负向加载的位移延性系数分别可达5.13、5.69),正负向加载的刚度退化曲线也趋于对称。

某高层钢框架结构组合减震设计

某转化医学中心位于高烈度设防地区、地震重点监视防御区,从减震效果和经济性等方面对不同减震方案进行比选后,选用BRB+VFD组合减震方案,同时提出了阻尼器布置原则。采用有限元法进行弹性和弹塑性时程分析,结果表明BRB+VFD组合减震方案可为主体结构提供一定的附加刚度和附加阻尼比,降低地震作用下基底剪力,延缓主体结构破坏,满足主体结构第二道防线设计要求;VFD在多遇地震、设防地震、罕遇地震作用下均发挥耗能作用;BRB在多遇地震作用下仅提供刚度,在设防地震和罕遇地震作用下进入屈服耗能,提高了结构抗震性能;随着地震烈度的增加,结构附加阻尼比随之增大,有效保证了结构抗震性能。

钢框架-偏心支撑结构消能梁暗置侧向支撑设计

在钢框架-偏心支撑结构中,针对钢结构住宅等建筑中不能接受常规消能梁侧向支撑的情况,设计了一种在消能梁段端部的楼板内设置型钢连接件及暗梁组成的暗置侧向支撑。有限元模拟分析表明,在规范规定的消能梁段下翼缘侧向水平荷载的作用下,该消能梁暗置侧向支撑能显著减小消能梁的扭转变形和侧向弯曲变形;在考虑消能梁上局部楼板失效的情况下,暗置侧向支撑也能提供消能梁合适的扭转约束刚度。通过某工程的原位静荷载试验,验证了该暗置支撑对消能梁发挥的预期侧向支撑作用。

自复位支撑钢框架抗震性能评估与损伤演化分析

为研究自复位耗能(SCED)支撑失效前后支撑钢框架结构的抗震韧性及损伤演化规律,设计了一单榀三层自复位支撑钢框架(SCBSF)并对其进行精细化有限元模拟,探究了支撑第二刚度和摩擦力在考虑支撑失效时对结构宏观响应和关键构件损伤状态的影响规律。结果表明,在地震作用下,SCED支撑作为SCBSF第一道抗震防线,激活工作后为结构提供了稳定的耗能与卓越的复位能力,相比屈曲约束支撑(BRB)框架残余变形角最大减小了84.9%,显著降低结构震后修复成本;支撑达到最大行程破坏失效后,结构层间变形加剧,框架梁和柱塑性耗能占比增加了92.33%,主体结构损伤值增加了48.45%,结构的抗震性能与韧性水平明显降低。参数分析结果表明,提升支撑的第二刚度和摩擦力能有效降低结构响应,但具有较大第二刚度和摩擦力的支撑框架仍抵抗不了强震作用时,可能导致更多的支撑失效破坏,结构损伤加剧。因此,设计SCED支撑时,需要适当提高支撑第二刚度和摩擦力,建议第二刚度取值为第一刚度的7/50~4/25,支撑摩擦力与预压力比值取为1~1.2;提升支撑第二刚度相比提升摩擦力对结构损伤值控制效果更好,随着地震动强度增大,摩擦力与第二刚度对结构抗震性能的影响逐渐减小。

湖北省科技新馆结构设计

湖北省科技新馆为大跨度、大悬挑的复杂高层结构。利用4个电梯井筒布置了由矩形钢管混凝土柱+钢支撑(钢板墙)组成的4个筒体巨柱,巨柱支撑着由4榀斜拉长悬臂跨层钢桁架组成的巨梁,形成新型大跨巨型钢框架结构体系。4个筒体巨柱内采用BRB+摇摆耗能墙的新型联合减震方案以减小地震作用;4榀巨梁内设置斜拉索以减小大悬挑区域的竖向变形;中庭沉浸影院采用新型的“上挂下支”的双曲面网壳结构体系,采用了内衬圆钢管的相贯焊节点保证网壳节点的刚性连接。进行了BRB+摇摆耗能墙大震下的减震分析、桁架与柱连接复杂铸钢节点的有限元分析及节点试验、3层和4层大悬挑角部的舒适度分析及人致振动实测及长悬臂结构的低周往复荷载试验。结果表明:湖北省科技新馆结构体系布置合理,各部分满足设计要求。

中心支撑半刚性连接钢框架抗震性能

为研究单边螺栓与T型钢连接的中心支撑钢框架的抗震性能,对1个1∶2缩尺的单跨单层的钢框架进行拟静力加载试验。采用ABAQUS有限元软件,建立子精细化非线性有限元模型,在验证子有限元模型的可靠性与精度基础上,通过改变支撑的孔径尺寸、壁厚以及形状等变量对框架整体抗震性能进行参数化分析。结果表明:有限元模拟结果与试验结果吻合度良好,可用于半刚性连接钢框架在循环荷载下的性能研究。随着支撑孔径和壁厚的增加,框架的滞回曲线更加饱满,刚度、耗能能力和延性皆有明显提升。方形截面支撑的抗震性能对比圆截面更加优异。梁柱节点的半钢性连接方式较刚性连接方式抗震性能更加优异。

多层剪切型支撑钢框架整体稳定性的解析算法研究

剪切型支撑钢框架整体稳定计算需考虑钢框架与剪切型支撑之间的相互作用,还需要考虑同层柱间的相互支援以及层与层之间的支援作用,规范计算长度系数法无法考虑这些因素可能会造成不合理设计。提出了一种计算多层剪切型支撑钢框架整体稳定性的解析算法,首先分析了支撑刚度与结构临界承载力之间的关系,推导了层临界支撑刚度计算公式,接着利用弹簧-摇摆柱力学模型推导了任意支撑下框架柱临界刚度比系数计算公式,然后将各楼层的有效抗侧刚度及荷载刚度进行楼层间的组装,将求解剪切型支撑钢框架的临界承载力转化为求解结构的楼层有效抗侧刚度,最后基于轴力权重加权平均的方法推导了可直接求解多层剪切型支撑钢框架临界承载力的计算公式,该公式能够判断结构的薄弱层,可以定量地计算楼层之间相互支援程度,有效地弥补规范尚无法求解弱支撑钢框架柱计算长度系数的不足。

中原文旅城欢乐世界一期雪世界高区结构设计

中原文旅城欢乐世界一期雪世界高区结构体系采用巨型钢框架,存在结构扭转不规则、楼板缺失、大悬挑、竖向构件间断及钢桁架平台为重载大跨钢结构等不规则情况和设计难点。设计中采用基于性能的抗震设计方法,根据构件的重要程度采用不同的性能目标。4个巨型框架柱为支撑框架结构,其支撑采用屈曲约束支撑,使结构在大震作用下形成良好的屈服机制和耗能能力。对结构进行小震反应谱法弹性分析、弹性时程分析、中震弹性分析以及大震弹塑性分析。结果表明,结构整体和构件的抗震性能均能达到设计的预期目标;巨型钢框架结构体系较好地适应了本工程的实际情况,可供类似项目在选择结构体系时参考。

广州航空轮胎大科学装置主体结构设计

广州航空轮胎大科学装置作为科学试验、产业吸引的重要建筑,方案新颖奇特,为竖向及水平圆组合的造型。结构设计时,通过设置防震缝将其分割成两个独立的结构主体,同时考虑建筑造型、试验设备、超高大跨吊车等的相关需求。竖向圆为中部通高的六层钢框架-中心支撑结构,充分利用吊车支撑做成强支撑框架,减少中部30m高跃层柱的长度系数,同时充分利用建筑形体,在30m以上做成半圆柱面单层网壳结构,实现建筑效果的同时也节约了材料;水平圆为钢框架结构,针对屋面大跨楼盖,采用单向密肋实腹钢梁,钢梁截面最大高度为1.9m,以满足建筑净空和结构挠度等要求;幕墙与主体间采用桁架式铰接支座,实现外鼓幕墙造型;10台半埋式试验台基础采用灌注桩基础,并设置隔振沟以减轻动力试验对主体结构的影响。设计最终很好地实现了建筑功能及结构安全性和适用性。

脱硝工程中偏心支撑钢结构的应用

脱硝钢结构的框架-中心支撑抗侧力体系有足够抗风需要的结构弹性刚度,在地震作用下,支撑设计不致屈曲则地震力过大,导致结构内力和基础反力过大,结构和基础总体造价偏高。如允许支撑在设防烈度及罕遇地震时屈曲降低地震作用,则支撑屈曲后性能退化,影响它的耗能能力使得结构缺失必要的抗侧刚度,结构有倒塌的安全问题。本文通过脱硝工程框架-偏心支撑体系在钢结构中的应用,论证了该结构体系弹性阶段满足多遇地震下的抗侧刚度和变形能力需求,罕遇地震下其消能梁段在结构中发挥了“保险丝”作用,在主体结构发生屈服前耗散大量的地震能量,避免支撑发生屈服,实现了罕遇地震下主体结构必要的安全要求。偏心支撑体系允许耗能梁段屈曲耗能,较大的减小了设防烈度和罕遇地震下结构的内力和支座反力,可在造价较低下满足结构安全性和经济性需求,说明了在高烈度地区偏心支撑技术在脱硝钢结构上有较好的推广价值。

东日本大地震后某校舍抗震加固改造与效果评估实验研究

2011年东日本大地震后,校舍建筑的抗震加固变得极为迫切。针对日本某校舍建筑的抗震加固工程展开计算分析及实验研究。首先阐述既有校舍建筑的结构特征及抗震鉴定结果,提出纵向采用钢支撑框架提高强度,首层横向新设剪力墙以及增厚楼梯间楼板的加固方案。随后,利用无线振动测试系统在校舍建筑抗震加固前后进行常时微动测试实验,分别从整体与局部角度分析加固前后校舍建筑加速度响应、固有周期以及振型等参数变化。最后,对比分析有限元计算及测试结果,阐述抗震加固方法及位置对原有建筑的性能影响,验证抗震加固方法的有效性。结果表明:采用钢支撑框架的加固方法有效提高既有校舍建筑的强度,加固后加速度响应值约降低至加固前的1/3,加固方法起到提高整体强度、改善刚度分布及结构整体性作用;固有周期以及加速度响应放大倍率的变化与该校舍抗震加固方法较吻合,表明基于振动测试的研究方法能够有效评估抗震加固措施的效果。研究成果可为既有校舍建筑的抗震加固方案选取及性能评估提供参考。

广州南沙国际金融论坛永久会址主体结构设计

广州南沙国际金融论坛永久会址属于大型复杂会议类建筑,具有大底盘双塔、钢屋盖连体、大开洞、竖向质心偏移、大跨结构等多项不规则项。介绍了结构重力体系和抗侧体系的选型思路,主体结构选用混凝土框架+屈曲约束支撑体系,外表皮采用空间钢结构。重点分析了单塔与整体结构的差异以及钢屋盖对下部双塔的影响。通过弹塑性分析,对大震作用下各个时程点的损伤水平进行评估,对大开洞的楼板进行了地震及温度作用下的楼板应力分析;对大跨桁架进行了抗连续倒塌分析。结果表明结构可满足大震不倒的要求,支撑承载力能充分发挥,大底盘结构具有良好的基座支撑特性。