Mechanical properties of steel mesh in anchor-mesh support for rocky tunnels

Underground geotechnical engineering encounters persistent challenges in ensuring the stability and safety of surrounding rock structures, particularly within rocky tunnels. Rock reinforcement techniques, including the use of steel mesh, are critical to achieving this goal. However, there exists a knowledge gap regarding the comprehensive understanding of the mechanical behavior and failure mechanisms exhibited by steel mesh under diverse loading conditions. This study thoroughly explored the steel mesh's performance throughout the entire loading-failure process, innovating with detailed analysis and modeling techniques. By integrating advanced numerical modeling with laboratory experiments, the study examines the influence of varying reinforcement levels and geometric parameters on the steel mesh strength and deformation characteristics. Sensitivity analysis, employing gray correlation theory, identifies the key factors affecting the mesh performance, while a BP (Backpropagation) neural network model predicts maximum vertical deformation with high accuracy. The findings underscore the critical role of steel diameter and mesh spacing in optimizing peak load capacity, displacement, and energy absorption, offering practical guidelines for design improvements. The use of a Bayesian Regularization (BR) algorithm further enhances the predictive accuracy compared to traditional methods. This research provides new insights into optimizing steel mesh design for underground applications, offering an innovative approach to enhancing structural safety in geotechnical projects.

Dynamic Response Impact of Vehicle Braking on Simply Supported Beam Bridges with Corrugated Steel Webs Based on Vehicle-Bridge Coupled Vibration Analysis

A novel approach for analyzing coupled vibrations between vehicles and bridges is presented,taking into account spatiotemporal effects and mechanical phenomena resulting fromvehicle braking.Efficient modeling and solution of bridge vibrations induced by vehicle deceleration are realized using this method.The method’s validity and reliability are substantiated through numerical examples.A simply supported beam bridge with a corrugated steel web is taken as an example and the effects of parameters such as the initial vehicle speed,braking acceleration,braking location,and road surface roughness on the mid-span displacement and impact factor of the bridge are analyzed.The results show that vehicle braking significantly amplifies mid-span displacement and impact factor responses in comparison to uniform vehicular motion across the bridge.Notably,the influence of wheelto-bridge friction forces is of particular significance and cannot be overlooked.When the vehicle initiates braking near the middle of the span,both the mid-span displacement and impact factor of the bridge exhibit substantial increases,further escalating with higher braking acceleration.Under favorable road surface conditions,the midspan displacement and the impact factor during vehicle braking may exceed the design values stipulated by codes.It is important to note that road surface roughness exerts a more pronounced effect on the impact factor of the bridge in comparison to the effects of vehicle braking.

Energy absorption characteristics of novel high-strength and hightoughness steels used for rock support

Nowadays,the development of novel metallic materials for rock support have attracted research interests since they can significantly improve the deformation and energy absorption capacities of rock bolts.Although previous studies proved the importance and mechanical advantages of utilizing high-strength and high-toughness(HSHT)steels in rock support,there is no systematic analysis to reveal the essential energy absorption parameter and the guidelines for further development of metallic rock support materials.This paper analyzes the energy absorption characteristics of novel HSHT steels(negative Poisson’s ratio(NPR)and twinning-induced plasticity(TWIP)steels)in comparison with conventional rock support materials.A physically based crystal plasticity(CP)model was set up and calibrated to study the effect of strain hardening rate(SHR).Meanwhile,the roles of underlying physical mechanisms,i.e.the dislocation density and twin volume fraction,were studied.The results show that the improvement of energy absorption density(EAD)is essential for further development of rock support materials,besides the increase of energy absorption rate(EAR)for previous development of conventional rock support materials.The increase of EAD requires increases of both strength and deformation capacity of materials.For HSHT steels,the decrease of SHR has a positive effect on the improvement of EAD.In addition,the increase of EAD is followed by the increase of twin volume fraction and the decrease of plastic Poisson’s ratio which can promote deformation plasticity of materials.Meanwhile,the increase of EAR is correlated with the accumulation of dislocation density,which can increase the strength of materials.This paper provides the theoretical basis and guidelines for developing rock support materials in deep underground engineering and other related fields.

Mechanical model for controlling floor heave in deep roadways with U-shaped steel closed support

Open U-shaped steel arch supports are commonly used in large-section static-pressure roadways in coal mines that are more than 900 m deep;however,it is very difficult to control floor heave of roadways.In this paper,a U-shaped steel closed support with an inverted U-shaped steel arch in the floor is proposed as a method for improving the support effect of the surrounding rock during the process of floor heaving.This research established a mechanical model for the U-shaped steel closed support,and determined the reaction forces at the connection of a camber angle.Using the limit load method calculated the critical buckling load of the inverted U-shaped steel arch,and use of a strength check method tested the strength of the U-shaped steel material.A numerical simulation was conducted using the finite difference software FLAC3 D.The simulation results show that the U-shaped steel closed support is able to control the floor heave of roadways,which is successfully used in the West 11-2 development roadway of the Zhuji Mine in the Huainan mining area in China.The cumulative floor heave over two years was less than50 mm.

Shear performance analysis of a heavy-duty universal hinged cast steel support

This paper presents the shear performance analysis of a heavy-duty universal hinged cast steel support with the largest bearing capacity. The effect of 9 parameters ( 52 specimens) ,i. e. height of the upper support,depth of the ring of the upper support,depth of the top plate of the bottom support,height of the ribs of the bottom support,depth of the ribs of the bottom support,bolt hole diameter,number of the ribs of the bowl,depth of the ribs of the bowl,and yield strength of the material,were analyzed with a 3-dimensional elastic-plastic finite element model in which the nonlinearities of geometry,material and contact were all considered. Analysis shows that height of the upper support,depth of the ring of the upper support and yield strength of the material have a great effect on the mechanical performance of the support. Height of the upper support has the largest effect on performance price ratio of the support,and the maximum effect can be up to 160% . Depth of the top plate of the bottom support,height of the ribs of the bottom support and depth of the ribs of the bottom support have a medium effect on performance price ratio of the support,and the effect is within the limit of 15% 19% .

Case study and design of steel set support for aged belt entry rehabilitation

In order to access remote reserve areas, some U.S.coal mines have to maintain aged underground entries for a great distance.However, high humidity, warm temperature, and time dependent deterioration can cause progressive roof deterioration and unexpected roof falls, and pose a great challenge to ground control engineers.With an active belt structure in place and limited space, re-bolting becomes very costly, less effective,and, sometimes, impractical and unfeasible.To gain long-term entry stability and serviceability, operators typically rehabilitate the aged belt entries by installing standing steel set supports.In the last several years,Keystone Mining Services, LLC,(KMS) has assisted many coal mines with their belt entry rehabilitation projects, evaluated the ground condition of various aged belt entries, and designed different standing steel set support systems.This paper presents a case study of a large-scale roof fall that occurred at an aged belt entry in a mine located in an eastern coalfield, analyzes root causes of excessive deformation of square sets that were installed in an adjacent entry, evaluates the adequacy of an existing rehabilitation square set, and develops remedial recommendations for future rehabilitation practice.Based on the case study, the paper outlines design guidelines for rehabilitation steel sets that include field evaluation, engineering considerations, design assumptions, steel structural analysis, and field installation quality control.

杭州电竞中心结构设计重难点概述

杭州电竞中心内圈主体结构采用钢框架-支撑结构,外圈采用“大倾角梭形斜柱+多段钢折梁框架”,是集承重与抗侧力于一体的结构体系,屋盖采用车辐式索承网格自平衡结构形式。详细介绍了地下结构、中央场馆结构的设计要点,门厅处利用建筑造型空间设计为多段钢折梁与跨层桁架相结合的结构形式;室内二层至三层楼面设计一浮空弧形人行桥,截面形式为薄壁钢箱梁,桥宽2.2m,跨度57m,采用“上挂下支”的稳定结构形式。对整体结构进行了静力弹性、动力弹塑性、振动台试验、典型节点有限元、整体稳定以及局部稳定等系列分析与试验。结果表明:结构在静力荷载和地震作用下强度和刚度均满足规范要求;典型节点极限承载力为荷载设计值的4.17倍;结构整体稳定性安全系数为3.79;斜柱局部稳定安全系数为2.52。合理的设计保证了结构的安全、经济和实用性。

基于声发射的钢桥面板焊接气孔缺陷在线识别

为实现正交异性钢桥面板机器人智能化焊接过程中缺陷的在线监测,提出了一种基于快速傅里叶变换和支持向量机的气孔缺陷声发射识别方法.通过开展机器人焊接实验,揭示了钢桥面板焊接及缺陷产生过程的声发射特征.无损伤与气孔缺陷2种工况信号的幅值、振铃计数、峰值频率和中心频率等参数重叠交叉严重、相关性不显著,而气孔缺陷信号的傅里叶频谱存在更多高频能量分布,因此以频谱为输入建立2种工况的径向基核支持向量机模型.实验结果表明,与朴素贝叶斯、随机森林和线性核支持向量机模型相比,径向基核支持向量机模型拥有更高的正确率(95.4%)和召回率(94.3%),能够用于焊接过程气孔缺陷的在线识别,具有较强的鲁棒性和实用性.

端钩型钢纤维混凝土简支梁受弯承载力试验

为改善普通钢筋混凝土梁自重大、易开裂、承载力低等缺点,在混凝土中常加入钢纤维,端钩型钢纤维,作为常见的一种高性能钢纤维得到广泛关注,中外学者针对端钩型钢纤维混凝土的基本力学性能开展了较多研究,而对端钩型钢纤维混凝土受弯构件的正截面受力性能有待深入研究。为研究端钩型钢纤维混凝土简支梁受弯性能,制作4根端钩型钢纤维混凝土梁及1根普通混凝土梁,对其进行受弯性能试验,根据试验得到的破坏形态、承载力、荷载-挠度曲线、荷载-应变曲线,分析端钩型钢纤维体积掺量对试件受弯承载力及破坏形态的影响。结果表明:端钩型钢纤维混凝土简支梁与一般混凝土简支梁受弯过程类似,均经历了弹性、开裂、带裂缝工作、破坏4个阶段;端钩型钢纤维混凝土简支梁与一般混凝土简支梁受弯过程均基本符合“平截面假定”;端钩型钢纤维限制了裂缝的产生和发展,使得纤维混凝土梁变形能力增强;与一般混凝土梁相比,端钩型钢纤维混凝土梁抗裂性及极限承载力得到提高,且构件承载力与钢纤维体积掺量基本呈现正相关;基于试验数据,对现行规范中开裂弯矩及极限承载力计算公式进行优化,开裂弯矩方面考虑对截面抵抗矩塑性影响系数进行修正,极限承载力方面引入纤维混凝土正截面承载力影响系数ζ,经修正计算值可较好吻合试验值。

装配式钢结构建筑与既有建筑活动连接技术研究

在医院改扩建工程中,由于已有的医疗工作不能停歇,固需要尽快完成改扩建施工,以减少对医院正常运营的干扰,传统的钢筋混凝土结构较难满足上述要求。相对而言,装配式钢结构体系主要构件的加工制作均在工厂制作完成,其现场安装施工周期短,且对周围病护区和正常医疗工作影响小。通过研发一种与既有建筑可调标高的活动连接,以满足医院扩建工程的要求。

张力作用下柔性带钢模态灵敏度理论分析及试验研究

卷到卷工艺的产品正向薄和宽的方向发展,其柔性特征导致的振动特性变化需深入研究。针对弹性支撑的运动带钢,建立了面外振动的动力学模型,分析了模态频率灵敏度影响因子;搭建了试验平台,针对柔性带模态试验提出了力锤的选择方法。开展了张力作用下的不同宽厚比带钢模态试验,并建立了数值仿真模型。有限元与试验结果对比说明了有限元模型有效性。定量分析了不同张力下宽度、厚度对带钢模态灵敏度的影响,及张力对不同带钢模态灵敏度的影响。结果表明不同宽度、厚度变化m=2阶模态灵敏度影响较大且随宽度、厚度增大而增大,其余四阶模态灵敏度接近于0;不同张力下n=3阶的模态灵敏度是n=2阶的两倍均随张力的增大而增大,更薄更宽带钢的(2,2)和(2,3)阶模态频率对张力变化的灵敏度更高。

天山胜利隧道敞开式TBM钢管片支护作用效果研究

针对TBM穿越断层破碎带地层洞壁围岩松动掉块严重的问题,依托乌尉天山胜利隧道,采用数值模拟的方法,通过对比研究传统支护方式与新型钢管片支护方式下围岩变形和围岩塑性区情况,研究钢管片支护的作用效果;同时,为说明不同支护的适用条件,采用现场调研方法开展不同支护方式下施工效率和经济性对比分析。结果表明:1)断层破碎带地层中,当围岩出露护盾后,变形量与塑性区范围增大,围岩破坏程度加剧,以锚杆和钢拱架为主的传统支护方式无法较好地控制围岩变形和塑性区发展。2)断层破碎带地层中,钢管片支护较传统支护的围岩累计沉降值降低53%,围岩变形收敛快,能更好地控制围岩变形和发展。3)钢管片支护较传统支护的围岩塑性区范围小,其中边墙的最终塑性区缩小44%,且钢管片支护可实现早封闭、及时支护,塑性区均匀,更有利于围岩的稳定。4)一般地层中,传统支护方式的经济性和效率更佳;断层破碎带地层中,钢管片支护方式可提供安全作业空间,减小钢拱架+喷锚支护作业量,较传统支护经济性和施工效率更佳。

深基坑双排微型桩-锚-撑组合支护结构受力与变形特性

为深入研究深厚杂填土地层深基坑微型桩-锚-撑组合支护结构随基坑开挖的受力与变形演化规律,首先,依托青岛市某深基坑工程开展双排微型桩-锚-撑原位试验,分析开挖工况下前、后排桩的桩身弯矩分布规律;然后,结合ABAQUS有限元模拟方法,明确微型桩、预应力锚索与钢支撑之间的协同作用及基坑变形规律;最后,揭示微型桩桩径变化、支护结构作用对桩身受力及基坑变形的影响机制。研究结果表明:增加开挖深度引起桩身正弯矩和负弯矩不断增大,极值点位置不断下移,桩身弯矩整体呈正“S”形分布;开挖至基底,前排桩的桩身反弯点分别位于钢支撑下方0.5 m和开挖面位置,后排桩的桩身反弯点分别位于钢支撑下方0.5 m和开挖面下方1.0 m范围内;基坑开挖竖向影响范围约为1.35H(H为基坑开挖深度),桩径增加近1倍,土体水平位移仅减少约51%,且随桩径继续增加,其对于限制基坑变形效果不显著;相较于桩锚支护结构,桩-锚-撑支护结构作用下,前、后排桩的最大水平位移分别减小34.9%和27.3%,基坑土体的最大水平位移减小46.0%。

锚杆钢-木组合托盘极限承载力学性能研究

为降低动压冲击对支护系统的破坏,适应大变形巷道的需要;基于球壳结构理论构建锚杆拱形钢托盘承载力学模型,给出钢托盘最大承载力计算式,分析钢托盘各参数尺寸对其承载力的影响关系,研究木托盘压缩实验特征;通过Abaqus软件对钢托盘与组合托盘开展有限元静态力学强度实验,对比分析钢托盘与组合托盘受压状态下的不同特征,分析让压距离对组合托盘承载性能的影响规律。结果表明:对钢托盘承载力的影响顺序为拱高>拱底圆半径>孔口半径,拱高与承载力服从对数增加关系,拱底圆半径、孔口半径与托盘承载力基本成线性增加关系;钢-木组合托盘中木托盘先受力,并经历了压密阶段、弹性变形阶段和塑性变形阶段,木托盘被压缩可降低钢托盘30.03%的承载受力,组合托盘的应力-位移曲线右移,组合托盘的极限承载力增加;钢托盘受压破坏从孔口处开始,基本成圆形向四周扩展,托盘底部四边中间区域与四角区域形成的高应力差是导致托盘四角破坏的主要原因。

四塔支承超大直径圆环复杂结构设计

上海临港新片区新建一幢地标建筑,该建筑为四幢46.8 m高的塔楼支承一个直径150 m、高度8.6 m的超大直径圆环,结构复杂。结构主要特点是超大直径圆环内侧采用倒三角形空间桁架、楼面梁采用变截面悬挑钢梁,四幢塔楼采用钢框架-屈曲约束支撑-屈曲约束钢板墙结构体系,超大直径圆环和四幢支承塔楼之间采用一个对角铰接、另一个对角滑动支座加黏滞阻尼器的连接方式。由于建筑师的要求,超大直径圆环横截面为外侧开口的C形截面,如何克服圆环外侧开口带来的扭转作用是设计难点。主要进行了支承塔楼的结构设计和计算分析,超大直径圆环的结构选型和抗扭性能研究,圆环和支承塔楼连接设计,支承塔楼和圆环组成的整体结构计算分析,整体结构大震下弹塑性时程分析。设计和研究成果可为圆环结构、多个塔楼共同支承一个上部结构等类似工程设计提供借鉴。

格栅式钢板桩与桩筏基础集成的基坑支护技术

针对软土地质基坑工程,提出格栅式钢板桩与桩筏基础集成的基坑支护技术,通过设置纵向双排钢板桩与横向钢板桩或钢板组成格栅式钢板桩,以提高支护结构强度与刚度,并与桩筏基础协同工作,以解决结构下部软土层承载力较差的问题,并提高支护结构稳定性。以某管廊工程为依托,通过计算分析与技术对比,论证集成支护技术的安全性与可行性。

轮辐式索承网格屋盖钢结构单道胎架施工技术

泰安体育场作为山东省泰安市的新地标,其钢结构屋盖采用轮辐式索承网格结构,通过68榀径向索和1道中央环索形成张拉结构体系,最大悬挑跨度为45 m。通过数值分析对施工过程进行了精细化稳定性分析,针对不规则构件吊装的工程技术难点,进行了吊装方案的设计与优化;考虑到成本控制与施工周期,极具创新性地采用了径向单道胎架作为屋盖施工过程中的临时支撑,结合工程实际情况设计了胎架转换结构,并对单道胎架整体在多种可能的荷载组合作用下进行验算与校核。通过对体育场屋盖施工全过程的模拟以及对安装过程中的重难点进行优化分析,为现场施工的安全顺利开展提供了技术保障,可为其他类似采用单道胎架施工方法的工程提供施工方案设计的新思路。

隧道管棚支护承载特性及支护参数试验研究

为探究隧道管棚注浆钢管不同支护参数对管棚支护承载能力的影响,引入Pasternak双参数模型构建出更符合实际情况的管棚支护力学模型,通过多组室内试验,对管棚在不同注浆钢管管径、壁厚、注浆饱满度及加设钢筋笼条件下的承载能力进行定量研究。研究表明:1)管棚注浆钢管支护参数中,对管棚承载能力的影响排序为:管径>注浆饱满度>壁厚>钢筋笼。2)增大管棚注浆钢管管径可大幅提高管棚的承载能力,相比管径为108 mm的管棚,管径为159、219、299 mm时管棚承载能力分别增大183.58%、398.62%、874.86%。3)管棚钢管注浆不饱满会较大程度削弱管棚的承载能力,钢管注浆饱满度由100%降至75%、50%时,管棚承载能力分别降低29.8%、34.5%,注浆饱满度为50%时管棚的承载能力与未注浆时相差不大。4)管棚钢管壁厚和钢筋笼加设与否对管棚的承载能力影响较小。因此,在实际工程中,可通过增大管棚钢管管径提升管棚的承载能力,通过减小管棚钢管壁厚及不加设钢筋笼节约用钢量。

装配式双拼钢围檩的拼接节点承载性能研究

结合某下穿通道基坑开挖的装配式钢结构支护体系,对双拼钢围檩拼接节点及相关组合桩和支撑进行现场测试,获取围檩承担的荷载数据,进而建立有限元分析模型。对比有限元计算值与实测值,分析拼接节点的承载性能。结果表明,依据等值梁法所得的组合桩内力可以用于围檩的荷载计算;拼接节点的有限元计算结果与现场监测数据较吻合,可为装配式双拼钢围檩的应用提供参考。