Inertia Matching During Dynamic Simulation of Vehicle Drive System on Test Bench

Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was for that on test bench, are put forward. Then, dynamic analysis of these models is made in detail. Inertia matching method of the test bench is researched and some useful formulas and graphs are brought forward. The experiment of an electric bus is introduced in order to explain the usage of this inertia matching method.

Changes in coronary bifurcations after stent placement in the main vessel and balloon opening of stent cells:theory and practical verification on a bench-test model

Objective To describe changes that occur in stent morphology and structure after its implantation in coronary bifurcation.Side branch (SB) compromise after stenting of main vessel in coronary bifurcation is a major intraprocedural problem and for the long term,as a place of restenosis.Methods We created an elastic wall model (parent vessel diameter 3.5mm,daughter branches 3.5mm and 2.75mm)with 30,45 and 60 degree distal angulation between branches.After stent implantation,struts to the side branch were opened with 2.0mm and consequently 3.0mm diameter balloons.Subsequent balloon redilatations and kissing balloon inflations (KBI) were performed.All stages of the procedure were photographed with magnification up to 100 times.Results We found that the leading mechanism for side branch compromise was carina displacement,and discovered theoretical description for expected ostial stenosis severity.Based on our model we found that displacement of bifurcation flow divider cause SB stenosis with almost perfect coincidence with our theoretical predictions.Opening of stent cells through the proximal and distal stent struts always increased interslrut distance,but never achieved good apposition to the wall.Balloon diameter increase didn't give proportional enlargement in stent cell diameters.KBI leads to some small better stent positioning,correcting main vessel strut dislodgment from wall,but never gave full strut-wall contact.Distance between struts and wall was minimal only when the stent cell perfectly faced ostium of SB.This was also our observation that the shape of ostium of SB becomed eUiptically-bean shaped after stent implantation and generally kept that shape during consequent stages of experiment.Measured diameter and area stenosis were perfectly fitted and theoretically predicted from our concept Conclusion We have described stent-wall deformations in stent-balloon technique for treatment of coronary bifurcation demonstrating carina displacement as possibly main mechanism of side branch compromise after main vessel stenting.We have shown that KBI could not give full strut-wall contact if there is no perfect facing of stem cell and SB ostium.(J Geroatr Cardool 2008;5(1):43-49)

Electronic Unit Pump Test Bench Development and Pump Properties Research

A unit pump test bench is developed on an in-line pump test platform. The bench is composed of pump adapting assembly, fuel supply subsystem, lubricating subsystem and a control unit. A crank angle domain injection control method is given out and the control accuracy can be 0.1° crank degree. The bench can test both mechanical unit pump and electronic unit pump. A test model-PLD12 electronic unit pump is tested. Full pump delivery map and some influence factors test is done. Experimental results show that the injection quantity is linear with the delivery angle. The quantity change rate is 15% when fuel temperature increases 30 ℃. The delivery quantity per cycle increases 30 mg at 28 V drive voltage. The average delivery difference for two same type pumps is 5 %. Test results show that the bench can be used for unit pump verification.

A versatile test bench for photomultiplier tube characterization and its application in the DAMPE-PSD

Performance characterization for massive photomultiplier tubes(PMTs) is a frequently encountered procedure in large nuclear and particle experiments.To facilitate this work,a dedicated test bench system has been developed at the Institute of Modern Physics,Chinese Academy of Sciences.The two-dimensional photocathode position scanning capability is an intrinsic function of the test bench,and up to 25 PMTs,with the diameter smaller than 2",can be tested simultaneously.The parameters of the light source pulses can be adjusted in a wide range,thus making it suitable for various characteristics measurements.The test bench system is highly automated with all the controlling operations integrated into a single software.Additionally,the hardware platform is extensible which allows complex testing schemes,and the modularity in the software design makes the migration from one testing configuration to another light-weight and efficient.All these features make the test bench versatile and reusable in different experiments.It has been first used in the construction of the Plastic Scintillator Detector(PSD) of DArk Matter Particle Explorer(DAMPE),and a total of 570 Hamamatsu R4443 tubes were tested successfully.The performance was verified and the testing results are also reported in this article.

Laboratory Test Bench for Research Network and Cloud Computing

At present moment, there is a great interest in development of information systems operating in cloud infrastructures. Generally, many of tasks remain unresolved such as tasks of optimization of large databases in a hybrid cloud infrastructure, quality of service (QoS) at different levels of cloud services, dynamic control of distribution of cloud resources in application systems and many others. Research and development of new solutions can be limited in case of using emulators or international commercial cloud services, due to the closed architecture and limited opportunities for experimentation. Article provides answers to questions on the establishment of a pilot cloud practically “at home” with the ability to adjust the width of the emulation channel and delays in data transmission. It also describes architecture and configuration of the experimental setup. The proposed modular structure can be expanded by available computing power.

The Efficiency Improving of Traction Drive Test Bench with Supercapacitor Energy Storage System

For development of passenger electrical transport, it is necessary to use energy more rationally. One of methods of vehicle power efficiency increase is installation of on-board energy storage systems. For studying of system operation, it is necessary to carry out a lot of experiments, therefore it is favorable to use the test bench and its computer model for reduction of the number of physical experiments. In this article, the results of computer modeling for the optimization of traction drive test bench by adjusting of the operation parameters of supercapacitor energy storage are described. Test bench operation is considered in cases of the energy storage system working at various selected supercapacitor initial voltages. Maximal increase of possibility of vehicle test bench regenerative braking with minimal decrease of autonomous power supply mode possibility is investigated. There is estimated the energy storage system efficiency improving measures dependence from supercapacitor operational voltage ranges. Parameters at which the minimum losses of energy are observed are revealed. Dependence of energy storage system discharge power on the most admissible supercapacitor current is established.

Test Bench for Robotics and Autonomy： Overview and Test Results

In this paper, the TAS-I （Thales Alenia Space-Italy） Test Bench for Robotics and Autonomy （TBRA） is presented. It is based on a flexible and modular software architecture （Framework Engine）, in which each functional module （representing the GNC subsystems） implements a key functionality of the GNC （Guidance Navigation and Control）. Modules communicate by means of standardised interfaces designed for exchange of necessary information among the modules composing the entire system. This approach permits the interchange-ability of each subsystem without affecting the overall functionalities of the GNC system. In this paper, the TBRA system, together with the implemented functional modules will be described. Tests results will be reported and future development will be discussed.

Bench Test Modeling for Current and Future PCMO Fuel Economy Requirements

The automotive and lubricant industries have been placing increased emphasis on the fuel economy benefits of today′s modern passenger car motor oils.The current ILSAC GF-4 specification has more stringent requirements than previous ILSAC specifications,and the proposed future ILSAC GF-5 specification is looking at further improvements in the lubricant′s fuel economy performance.To address these needs,Afton Chemical has developed correlations between the rheological and frictional properties of oils and fuel economy measured in engine and field tests.In this paper we will present correlations between lubricants′ physical properties and fuel economy measured in vehicles and engine tests.These tools have been used to develop current commercial oils which are being used extensively to meet today′s OEM needs.

Gas Bench Ⅱ-IRMS磷酸法在线测定水中溶解无机碳碳同位素分析条件及影响因素

采用Gas Bench Ⅱ-IRMS对水中溶解无机碳碳同位素在线测定影响因素进行研究,确立了分析方法。通过对影响因素的研究确定了水中溶解无机碳碳同位素测试的最佳平衡时间;样品水中溶解无机碳浓度与样品测试的信号强度呈明显正相关;测试过程中色谱柱温度的高低不仅会影响样品峰的出峰时间,还会影响样品峰宽、峰高及峰积分面积等,影响最终测试结果。为了确保水中溶解无机碳碳同位素测试方法的准确性与可行性,进行了方法试验验证,水中溶解无机碳碳同位素比值(δ^(13)C)的测定值与验证单位给出的δ^(13)C测定值相一致,此测试方法具有可行性。在线测试的高效率和小样量与传统方法比较有显著优势,这为拓展同位素分析技术的应用领域提供了一种快速、高效的手段。本测试分析方法适用于地下水、地表水、大气降水的溶解无机碳碳同位素组成的在线测定。

Electronics Workbench——“计算机里的电子实验室”

文章介绍了EWB充当电子实验室虚拟试验平台所具有的重要意义,并通过其在电工、数字电子技术、模拟电子技术实验中的相关应用,举例对上述观点加以验证。

High RF power tests of the first 1.3 GHz fundamental power coupler prototypes for the SHINE project

The Shanghai High Repetition Rate XFEL and Extreme Light Facility(SHINE)project will use 6001.3 GHz fundamental power couplers,which are modified based on TTF-Ⅲ power couplers,for continuous-wave operation with input power up to approximately 7 kW.The first batch of 20 sets of 1.3 GHz coupler prototypes was fabricated from three domestic manufacturers for the SHINE project.To better characterize the radio frequency conditioning phenomena for validating the performance of power couplers,a room temperature test stand was designed,constructed,and commissioned for the SHINE 1.3 GHz power couplers.In addition,a horizontal test cryostat was built to test the 1.3 GHz superconducting cavities,fundamental power couplers,tuners,and other components as a set.The results of these tests indicate that the 1.3 GHz couplers are capable of handling up to 14 kW continuous waves.Herein,the main aspects of the radio frequency design and construction of the test stand,along with the test results of the high-power conditioning of the 1.3 GHz couplers,are described.

Design and Experiment of Electronic-hydraulic Loading Test-bed Based on Tractor's Hydraulic Steering By-wire

An Electro-hydraulic loading system is designed based on a test-bed of tractor's hydraulic steering by-wire. To simulate the steering resistance driving tractor in many kinds of soils and roads,the loading force is controlled to make proportional and continuous variable by an electro-hydraulic proportional relief valve. A steering resistance loading test-bed is built to test three kinds of steering resistance including constant,step and sine style. Tire lateral resistance is also tested under different steering conditions. The result shows that the electro-hydraulic loading system has high stability and following performance. Besides,the system's steady state error is lower than 3. 1%,and it meets the test requirement of tractor's hydraulic steering by-wire.

Design and testing of an internal hot-cathode-type PIG ion source for superconducting cyclotron

The superconducting cyclotron SC200 is intended to generate a 200 MeV, 400 nA proton beam for future particle therapy. The internal hot-cathode-type Penning ionization gauge (PIG) ion source for the SC200 is designed for the generation of hydrogen ions. A brief description of the design of ion source and test bench, which are used in SC200, is given in this paper. The ion source has been verified on the test bench, and the results indicated that the designed ion source meets the expected requirements. The lifetime of the filament exceeded 100 h in the test. In addition, the extraction voltage and the gas flow that influence the extracted ion current intensity have been tested in the experiment.

Experimental Tests of the Operating Conditions of a Micro Gas Turbine Device

The aim of this work is to analyze the performance of a commercial micro gas turbine, focusing on the analysis of the fuel consumption and the outlet compressor and turbine temperature at various rpm, and to evaluate and compare the efficiency of the device. A test bench has been assembled with the available equipment in the laboratory of the department of mechanical and aerospace engineering in Roma. By using the software supplied by the manufacturer, the evaluation of the operating performance of the device at different speeds has been performed, obtaining all the values of interest.

Study of the Judder Characteristics of Friction Material for an Automobile Clutch and Test Verification

The friction judder characteristics during clutch engagement have a significant influence on the NVH of a driveline.In this research,the judder characteristics of automobile clutch friction materials and experimental verification are studied.First,considering the stick-slip phenomenon in the clutch engagement process,a detailed 9-degrees-of-freedom(DOF)model including the body,each cylinder of the engine,clutch and friction lining,torsional damper,transmission and other driveline parts is established,and the calculation formula of friction torque in the clutch engagement process is determined.Second,the influence of the friction gradient characteristics on the amplification or attenuation of the automobile friction judder is analyzed,and the corresponding stability analysis and the numerical simulation of different friction gradient values are carried out with MATLAB/Simulink software.Finally,judder bench test equipment and a corresponding damping test program are developed,and the relationship between the friction coefficient gradient characteristics and the system damping is analyzed.After a large number of tests,the evaluation basis of the test is determined.The research results show that the friction lining with negative gradient characteristics of the friction coefficient will have a judder signal.When the friction gradient value is less than-0.005 s/m,the judder signal of the measured clutch cannot be completely attenuated,and the judder phenomenon occurs.When the friction gradient is greater than-0.005 s/m,the judder signal can be significantly suppressed and the system connection tends to be stable.

俯仰式播种单体仿形性能检测试验台设计与试验

为解决播种单体仿形机构性能难以检测的问题,设计了俯仰式播种单体仿形性能检测试验台。阐述了试验台组成结构与工作原理,对其高速传动系统、液压升降系统、监控系统以及关键部件参数进行设计。应用ANSYS软件对台架整体和关键部件进行静力学分析和模态分析,验证结构设计的合理性。为检验俯仰式播种单体仿形性能检测试验台的实际检测效果,以德邦大为1205型牵引式免耕精量播种机播种单体为研究对象,先以液压杆伸出量与传送带速度为试验因素,以监控系统误差为评价指标进行试验。试验得出,在液压杆伸出量为0~200 mm范围内,监控系统角度传感器最大误差为0.69 mm;在传送带速度8~19 km/范围内,光电编码器最大误差为0.18 km/h。确认监控系统准确性后,再以单体速度为试验因素,采集速度8、10、12 km/h下地块的起伏数据为目标曲线,以地形起伏模拟曲线的绝对误差平均值为指标进行单因素试验,试验得出,所设计的试验台可有效模拟田间地面的起伏频率与起伏量,绝对误差平均值为1.86 mm,满足播种单体仿形性能检测需求。

USING LABORATORY TESTS TO PREDICT OXIDATION IN TODAY'S ENGINES

Laboratory bench tests are used to predict lubricant performance in modern engines. The evolution of ASTM(American Society of Testing and Materials) engine Sequence tests and associated laboratory bench tests is reviewed. Several oxidation screening tests are described. Correlation of oxidation screening tests with ASTM Sequence Ⅲ high temperature oxidation engine test is addressed, using both European and ASTM reference oils. Modification of the oxidation screening test methods is attempted in order to improve the correlation as the Sequence Ⅲ test method evolves.

钵苗移栽机取苗装置的设计与试验

设计了一种钵苗移栽机取苗装置,并对夹苗和松苗两种状态下的末端执行器进行运动仿真,从而选择合适行程的气缸或推杆作为原动件。选用凸轮机构用于顶苗,根据凸轮各阶段工作规律设计出合理的轮廓线,利用仿真验证出满足设计要求。试验结果表明:设计的取苗装置未取出率平均值为8.22%,取苗成功率平均值为91.78%,达到了设计目标。

电涡流缓速器优化设计与制动性能分析

文章在考虑去磁效应的基础上建立电涡流缓速器数学计算模型,采用涡流折算系数法求出闭合磁路磁感应强度,推导出电涡流缓速器电磁制动力矩表达式;在某汽车制动系统有限公司现有产品的基础上,将圆形极柱优化设计为扇形极柱,并利用Maxwell有限元仿真软件对不同长度扇形极柱的新型电涡流缓速器模型的制动力矩进行仿真分析;将最终确定的新型电涡流缓速器通过有限元仿真和台架实验与原产品进行对比验证。结果表明:新型电涡流缓速器与传统电涡流缓速器的制动扭矩在不同转速下变化的规律基本一致,制动性能有明显提升;仿真结果和实验结果最大误差小于5%,证明了新型电涡流缓速器的有效性和优化设计的正确性。

无线射频压裂滑套系统模拟试验研究

将无线射频识别(RFID)技术应用到油水井压裂中,能够很好地解决现有压裂滑套存在的压裂级数受限、操作非智能等诸多问题。因井下工况复杂,理论分析与实际应用差别较大,为进一步系统地探究井下无线射频系统的开发应用,使用三维软件设计无线射频滑套模拟试验台,对标签的运动状态进行理论分析,并建立室内模拟试验平台,系统地进行井下相关试验。试验结果表明:标签选择有铁氧体磁芯,且天线绕制形式选用单层螺线管线圈,可以提高整个系统的性能;在系统电感值相同的情况下,单层螺线管天线轴向长度对阅读器模块能识别的标签最大通过速度有积极的影响;标签天线线圈与阅读器天线线圈平面之间的角度也会影响标签的识别率。研究结果对井下无线射频系统的开发应用具有一定的指导作用。