Effect of titanium on the sticking of pellets based on hydrogen metallurgy shaft furnace:Behavior analysis and mechanism evolution

Direct reduction based on hydrogen metallurgical gas-based shaft furnace is a promising technology for the efficient and low-carbon smelting of vanadium-titanium magnetite.However,in this process,the sticking of pellets occurs due to the aggregation of metal-lic iron between the contact surfaces of adjacent pellets and has a serious negative effect on the continuous operation.This paper presents a detailed experimental study of the effect of TiO2 on the sticking behavior of pellets during direct reduction under different conditions.Results showed that the sticking index(SI)decreased linearly with the increasing TiO2 addition.This phenomenon can be attributed to the increase in unreduced FeTiO3 during reduction,leading to a decrease in the number and strength of metallic iron interconnections at the sticking interface.When the TiO2 addition amount was raised from 0 to 15wt%at 1100°C,the SI also increased from 0.71%to 59.91%.The connection of the slag phase could be attributed to the sticking at a low reduction temperature,corresponding to the low sticking strength.Moreover,the interconnection of metallic iron became the dominant factor,and the SI increased sharply with the increase in re-duction temperature.TiO2 had a greater effect on SI at a high reduction temperature than at a low reduction temperature.

Effects of Plant Spacing and Finger Sticking Area Settings for Machine Transplanting on Yield of Double-season Early Rice

The effects of rice transplanters＇ transplanting settings（plant spacing and finger sticking area） on rice yield were investigated in two early-season rice cultivars：hybrid rice cultivar（Zhuliangyou 819） and conventional rice cultivar（Zhongjiazao 17）.The results showed that,different transplanting settings resulted in different numbers of transplanted basic seedlings,and the rice yield was significantly correlated with the number of transplanted basic seedlings.The number of transplanted basic seedlings increased with the decrease of plant spacing and the increase of finger sticking area.The rate of lost hills of machine transplanting decreased with the increase of finger sticking area.The leaf area index and amount of dry matter accumulation were highly correlated with the number of transplanted basic seedlings.The average yield of the rice transplanted with a plant spacing of11.5 cm was higher than that with a plant spacing of 13.8 cm.In the field transplanted with the rice under the plant spacing of 13.8 cm,the rice yield increased with the increase of finger sticking area,and the finger sticking area of 2.23 cm2 showed the highest rice yield of 8 174.16 kg/hm2 of Zhuliangyou 819 and 7 925.54kg/hm2 of Zhongjiaozao17.In the field transplanted with the rice under the plant spacing of 11.5 cm,the rice yield was the highest with the finger sticking area of 1.83 cm2,and then decreased with the large finger sticking area.Under the plant spacing of 11.5 cm,the highest rice yields of Zhuliangyou 819 and Zhongjiaozao17 were 8 492.94 kg/hm2 and 8 000.23 kg/hm2,respectively.Therefore,the preferred machine transplanting settings for double-season early rice are a plant spacing of11.5 cm and a finger sticking area of 1.83 cm2,while the finger sticking area should be increased to 2.23 cm2 for conventional rice cultivars.

APPLICATION OF 2-D MOIRE INTERFEROMETRYOF STICKING FILM IN HUMAN TIBIA MEASUREMENT

This paper makes use of the method of testing and measuring the human body tibia by using2-D moire interferometry of sticking film. hased on the J'--y direction moire patterns recorded synchronously by 2-D optical path,the elastic constant,strain and displacement of the tibia are measured.Compared with the electric measuring method the error is samll and the sensitivity is high.

Sticking of iron ore pellets in direct reduction with hydrogen and carbon monoxide:Behavior and prevention

A series of reduction experiments of iron ore pellets with hydrogen,carbon monoxide and their mixture were carried out in a laboratory scale shaft furnace.The sticking behavior accompanying reduction of iron ore pellets was investigated.And morphology of the sticking interface forming during reduction was analyzed by SEM equipped with EDS.In order to evaluate the effects of the temperature and gas composition on sticking properties,reduction of iron ore pellets were conducted at 800-1000 ℃.The results show that the sticking strength of the pellets increases with temperature,however,decreases with hydrogen content in reducing gas.For an efficient shaft furnace operation in direct reduction(DR),relative prevention of sticking such as coating of pellets was also developed to solve sticking problem.The results show that CaO is a suitable material for the coating method.

A New Method for Predicting Wall Sticking Occurrence Temperature of High Water Cut Crude Oil

In crude oil transportation, adhesion of oil on pipe wall can cause partial or total blockage of the pipe. This process is significantly affected by wall sticking occurrence temperature(WSOT). In this work, an efficient approach for estimating WSOT of high water-cut oil, which can agree well with the actual environment of multiphase transportation pipeline, is proposed. Based on the energy dissipation theory, it is possible to make comparison of average shear rates between the stirred vessel and the flow loop. The impacts of water content and shear rate on WSOT are investigated using the stirred vessel and the flow loop. Good agreement has been observed between the stirred vessel and the flow loop results with the maximum and the average absolute deviations equating to 3.30 °C and 2.18 °C, respectively. The development of gathering scheme can enjoy some benefits from this method.

Test research on sticking mechanism during hot rolling of SUS 430 ferritic stainless steel

The sticking phenomenon during hot rolling of SUS 430 ferritic stainless steel was investigated by means of a two-disc type high-temperature wear tester. The test results indicate that sticking particles on the surfaces of high chromium steel （HiCr） and high-speed steel （HSS） rolls undergo nucleation, growth, and saturation stages. Grooves on the roll surface generated by grinding provide nucleation sites for sticking particles. The number of sticking particles on the HiCr roll surface is greater than that on the HSS roll surface. The average surface roughnesses （Ra） of HiCr and HSS rolls change from 0.502 and 0.493 μm at the initial stage to 0.837 and 0.530 μm at the saturation stage, respectively. The test further proves that the sticking behavior is strongly dependent on roll materials, and the HSS roll is more benefi- cial to prevent particles sticking compared with the HiCr roll under the same hot-rolling conditions.

Wall Sticking of High Water-Cut, Highly Viscous and High Gel-Point Crude Oil Transported at Low Temperatures

Some crude oils with high water cut have the capability to flow below the oil gel point, while the oil particles adhere to the pipe wall in the form of paste, also called "wall sticking". Wall sticking is a serious problem during the pipeline transportation, leading to partial or total blockage of the pipeline and energy wastage. In this paper, a series of laboratory flow loop experiments were conducted to observe the wall sticking characteristics of crude oil with high water cut, high viscosity and high gel point at low transportation temperatures. The effects of shear stress and water cut on the wall sticking rate and occurrence temperature were investigated. Experimental results indicated that the wall sticking rate and occurrence temperature were lower under stronger shear stress and higher water cut conditions. A criterion of wall sticking occurrence temperature(WSOT) and a regression model of wall sticking rate were then established. Finally, the software was developed to calculate the pressure drop along the pipelines of crude oils with high water-cut. It was able to predict the wall sticking thickness of gelled oil and then calculate the pressure drop along the pipelines. A typical case study indicated that the prediction results obtained from the software were in agreement with actual measured values.

Influence of Oil and Water Components on Wall-sticking Occurrence Temperature in High Water-cut Crude Oil Pipeline

To study the wall-sticking phenomenon and prevent pipeline blockage accidents,two analytical methods are used to evaluate the influence of different crude oil components on the wall-sticking occurrence temperature(WSOT).The WSOT and the interactions among oil,water,and surface solids are measured and calculated by various devices under different values of the wax content,water pH,and salinity.The results show that there is greater correlation between the wax content and WSOT than between resins/asphaltenes and WSOT.Furthermore,the wax content,water pH,and salinity have different effects on WSOT.There is generally a positive correlation between wax content and WSOT,whereas the maximum WSOT occurs when the water pH is in the range 5.7–6.5,and decreases under more acidic or alkaline conditions.As the salinity increases,WSOT decreases slightly,but quickly becomes saturated.In terms of interactions,variations in the interfacial tension and adhesion work with pH and salinity are consistent with that of WSOT,while the contact angle exhibits the opposite relation.

Operational procedures of auricular point sticking technology

As an external treatment technique of traditional Chinese medicine(TCM),auricular point sticking,which is rooted in holographic biology theory and TCM viscera and meridian theory,is a safe and effective treatment method.This article introduces the technology overview and development process.The auricular point sticking technique for constipation is taken as an example to specify the basic requirements,assessment,operational points,acupoint selection and matters needing attention during the implementation of the auricular acupressure technique,providing a reference for the operating procedures of this technique in the clinical treatment of other diseases such as insomnia,diarrhea,colds,hypertension,headache,and dysmenorrhea.

An Artificial Intelligence Algorithm for the Real-Time Early Detection of Sticking Phenomena in Horizontal Shale Gas Wells

Sticking is the most serious cause of failure in complex drilling operations.In the present work a novel“early warning”method based on an artificial intelligence algorithm is proposed to overcome some of the known pro-blems associated with existing sticking-identification technologies.The method is tested against a practical case study(Southern Sichuan shale gas drilling operations).It is shown that the twelve sets of sticking fault diagnostic results obtained from a simulation are all consistent with the actual downhole state;furthermore,the results from four groups of verification samples are also consistent with the actual downhole state.This shows that the pro-posed training-based model can effectively be applied to practical situations.

Numerical Simulation and Prediction for Sticking Type Breakout Behavior in Slab Contiuous Casting

A two-dimensional heat transfer model was developed to calculate the mould wall temperature field under normal operations condition and to determine its changing behavior when breakout occured. On the numerical simulation of sticking type breakout process and the breakout related wall temperature evolution, parameters of prediction were suggested.

Clinical Effect of Auricular Point Sticking in Patients with Lung Cancer Receiving Chemotherapy

Objective:To discuss and analyze the clinical effect of auricular point sticking in lung cancer chemotherapy.Methods:Sixty-two patients with lung cancer treated with chemotherapy in Suqian Traditional Chinese Medicine Hospital of Jiangxi Province were selected for case evaluation and analysis.The time span of the research was from June 2020 to June 2021.The patients were divided into two groups:a study group(n=31)and a control group(n=31)based on their medical record numbers.All the patients were treated with conventional western medicine before and after chemotherapy to prevent adverse reactions;however,the patients in the study group were also treated with auricular point sticking in addition to the fonner.The relevant indexes of the two groups were compared.Results:The incidence of adverse reactions was significantly lower in the study group compared to the control group(P<0.05);the rate of symptomatic relief of the patients in the study group was higher than that of the control group(P<0.05);the stress response indexes toward chemotherapy of the study group were better than those of the control group(P<0.05)・Conclusion:Auricular point sticking for patients with lung cancer who are receiving chemotherapy can reduce the incidence of adverse reactions,alleviate clinical symptoms,such as chest distress,asthma,and poor appetite,significantly alleviate stress response caused by chemotherapy,as well as promote the treatment effect;thus,it is worthy of promotion.

Assessment of Knowledge, Attitude and Practices among Healthcare Workers in a Tertiary Care Hospital on Needle Stick Injury

Purpose: Needle-stick injury (NSI) is one of the most potential occupational hazards for healthcare workers because of the transmission of blood-borne pathogens. As per recent data, around 30 lakh healthcare workers sustain Needle stick injuries each year. This study was conducted to assess healthcare workers’ knowledge, attitude and practices regarding needle stick injury. Materials & Methods: A cross-sectional study was conducted in a Tertiary Care Hospital over the period of 3 months. The study population consisted of Intern Doctors, Post Graduate resident Doctors, Staff Nurses, laboratory technicians of Government Medical College and New Civil Hospital, Surat (n = 300). The data were collected using a self-administered questionnaire via the means of Google Forms. Questionnaire was made with prior review literature. The data obtained were entered and analysed in Microsoft Excel. Results: The prevalence of NSI in our study was 46%, with a higher prevalence among the PG residents (72%). Overall scores regarding knowledge and attitude were better in PG residents (knowledge score > 7 in 71% and Attitude Score > 7 in 68% of PG Residents). Even though the PG residents scored highest in the knowledge category, the majority of them suffered needle stick injuries as a result of poor practice scores. Among those who had NSI (n = 139/300), 70% of study participants had superficial injuries, only 9% reported the incident, 18% got medical attention within 2 hours of the incident, and 7% followed up to recheck their viral markers status. Most incidents of NSI were due to hypodermic needles while recapping needles. Conclusion: Exposure to needle stick injuries and their underreporting remains a common problem. It is imperative that healthcare workers receive regular training on the proper handling of sharp objects. We can also draw the conclusion that preventing NSIs requires putting knowledge into practice.

Effect of Mouth Opening Training Stick Combined with Oral Massage on Mouth Opening Difficulty in Head and Neck Cancer Patients after Treatment

Objective: To study the application effect of mouth-opening training sticks combined with oral massage on patients with mouth-opening difficulty after treatment for head and neck cancer. Methods: Using convenient sampling, 60 patients with mouth-opening difficulty after treatment for head and neck cancer admitted to the Oncology Department from February 2022 to October 2023 were selected for a 2-week exercise and nursing program. The patients were divided into a control group (February 1, 2022 to November 30, 2022) and an observation group (December 1, 2022 to October 31, 2023), with 30 patients in each group. The control group underwent routine mouth-opening functional exercises combined with cork for oral support training, while the observation group underwent routine mouth-opening functional exercises combined with oral massage and mouth-opening training sticks for oral support training. The mouth-opening degree, mouth-opening difficulty level, comfort level, compliance, and quality of life were observed in both groups. Results: Before the intervention, there were no statistically significant differences in mouth-opening degree and mouth-opening difficulty level between the two groups (P > 0.05). After the intervention, the mouth-opening degree, mouth-opening difficulty level, oral comfort level, compliance, and QLICP-HN scores in the observation group were all better than those in the control group, with statistically significant differences (P < 0.05). Conclusion: The combination of mouth-opening training sticks and oral massage with mouth-opening functional exercises can effectively improve the degree of mouth-opening difficulty, enhance oral comfort, increase compliance with mouth-opening exercises, and improve quality of life.

Prevalence of Occupational Injury and Knowledge of Post-Exposure Prophylaxis Accessibility among Healthcare Workers in Mogadishu, Somalia

Introduction: Healthcare workers in Mogadishu, Somalia face significant occupational injury risks, particularly needle stick injuries, with 61.1% reporting incidents. This poses a serious threat to their health, leading to infections such as hepatitis B, hepatitis C, and HIV. Despite the high prevalence of injuries, awareness of Post-Exposure Prophylaxis (PEP) accessibility is relatively high, with 84.0% of respondents aware of it. However, there are gaps in knowledge and implementation, as evidenced by variations in availability of PEP. Improving workplace safety measures, providing comprehensive training on injury prevention and PEP protocols, and ensuring consistent availability of PEP in healthcare facilities are crucial steps to safeguard the well-being of healthcare workers in Mogadishu, Somalia. Methods: A cross-sectional study was conducted among hospital workers in Mogadishu, Somalia, focusing on professionals from various healthcare facilities. The study targeted nurses, doctors, laboratory personnel, and pharmacists. Purposive sampling was employed, resulting in a sample size of 383 calculated using Fisher’s sample size formula. Data were collected using coded questionnaires entered into Microsoft Excel 2019 and analyzed with SPSS software to generate frequencies and proportions, presented through frequency tables and pie figures. Results: The study in Mogadishu, Somalia, examined the prevalence of occupational injuries and knowledge of Post-Exposure Prophylaxis (PEP) accessibility among healthcare workers. Findings indicate a high prevalence of injuries, with 61.1% reporting incidents, predominantly needle stick injuries (60.6%). Despite the majority seeking prompt medical attention (72.0%), work-related illnesses affected 53.2% of respondents, notably work-related stress (59.5%). While most received training on injury and illness prevention (68.9%), gaps exist in PEP awareness, with 16.0% unaware of it. Nonetheless, 84.0% were aware, predominantly through health facilities (52.0%). Availability of PEP was reported by 71.3% in healthcare facilities, with variations in shift availability. The majority reported guidelines for PEP use (55.7%). Efforts are needed to bolster PEP awareness and ensure consistent availability in healthcare facilities to safeguard worker health. Conclusion: High prevalence of occupational injuries among healthcare workers, with needle stick injuries being the most common (60.6%). Despite this, 84.0% of respondents were aware of Post-Exposure Prophylaxis (PEP), primarily learning about it from health facilities (52.0%). While 71.3% reported the availability of PEP in their facility, 28.7% noted its unavailability. These results emphasize the need for improved education and accessibility of PEP to mitigate occupational injury risks.

探索中国美食之旅

1 When I was about to go to China,I was so fasci⁃nated that I completely forgot about the food I would be eating during my stay.It wasnt until my Chinese friend brought out chopsticks and told me to practise using them that I realized how difficult it was.My friend laughed,but I had so many questions in my mind.Why dont the Chinese have proper cutlery(餐具)?I had never seen Chinese people using spoons in movies,only chopsticks.I mentally prepared myself for the chopstick journey ahead.

Eating Hot Pot

Hot pot is a popular Chinese dish.It is delicious!You sit at a table with a pot of hot broth.First,the broth has to boil.Then you can cook many different things in it.Many people put seafood and different kinds of meat in hot pot.Vegetables such as cabbage and corn are delicious in it,too.People also add mushrooms,tofu and noodles to hot pot.Take some cooked food from your hot pot with your chopsticks.Dip it in some sauce and enjoy!

Friction heat production and atom diffusion behaviors during Mg-Ti rotating friction welding process

An innovative physical simulation apparatus, including high speed camera, red thermal imaging system, and mechanical quantity sensor, was used to investigate the friction heat generation and atom diffusion behavior during Mg-Ti friction welding process. The results show that the friction coefficient mainly experiences two steady stages. The first steady stage corresponds to the Coulomb friction with material abrasion. The second steady stage corresponds to the stick friction with fully plastic flow. Moreover, the increasing rates of axial displacement, temperature and friction coefficient are obviously enhanced with the increase of rotation speed and axial pressure. It can also be found that the there exists rapid diffusion phenomenon in the Mg-Ti friction welding system. The large deformation activated diffusion coefficient is about 105 higher than that activated by thermal.

帕金森病与血管性帕金森综合征嗅觉功能改变的研究

目的研究帕金森病(PD)与血管性帕金森综合征(VP)的嗅觉功能改变及其影响因素,探讨Sniffin’Sticks方法(SST)嗅觉功能检查在PD诊断和鉴别诊断中的应用价值。方法选取2015年3~12月在南通大学第二附属医院就诊的PD、VP患者及性别、年龄匹配的同期体检正常对照者(HC组)各40例。采用SST检查方法分别评价PD、VP、HC三组受检者的嗅觉阈值(OT)、嗅觉辨别阈值(OD)、嗅觉识别阈值(OI)及三项得分之和(TDI)总分,比较三组受检者间嗅觉功能的差异,并评估其嗅觉功能与年龄、性别、简易精神状态量表(MMSE)、病程、H-Y分级、统一帕金森病评定量表(UPDRS-Ⅲ)等变量的相关性。应用受试者工作特征曲线(ROC)评价TDI在PD诊断中的价值。结果 PD、VP、HC三组受检者间基线资料比较差异均无统计学意义(P>0.05);PD组嗅觉障碍发生率为92.5%,显著高于VP组(37.5%)及HC组(35.0%),差异有统计学意义(P<0.05);PD、VP、HC三组受检者的TDI总分分别为(20.07±4.45)分、(30.53±5.90)分和(31.00±4.99)分,PD组TDI总分明显低于HC组和VP组(P<0.05),而VP组与HC组间比较差异无统计学意义(P>0.05);HC组TDI总分与年龄呈负相关(r=-0.987,P<0.05),与MMSE呈正相关(r=0.866,P<0.05);PD组TDI总分与病程呈负相关(r=-0.484,P<0.05),与MMSE呈正相关(r=0.618,P<0.05),与性别、年龄、H-Y分级及UPDRS-Ⅲ评分无关;VP组TDI总分与年龄、病程、H-Y分级均呈负相关(分别为r=-0.989,P<0.05;r=-0.770,P<0.05;r=-0.353,P<0.05),与MMSE呈正相关(r=0.838,P<0.05),与性别、UPDRS-Ⅲ评分无关;区分PD组和HC组时TDI总分曲线下面积(AUC)为0.944,临界值为23.313,灵敏度为82.5%,特异度为97.5%;区分PD组和VP组时,TDI总分AUC为0.911,临界值为23.563,灵敏度为87.5%,特异度为82.5%。结论 SST嗅觉检测方法临床应用简单、结果可靠、可操作性强;PD存在较为显著的嗅觉障碍,VP嗅觉功能与HC比较无显著差异;使用SST能够为PD的诊断和鉴别诊断提供重要的参考信息。

基于改进GAC模型的二值水平集前列腺超声图像自动分割算法

提出了一种基于改进测地线主动轮廓(geodesic active contour,GAC)的自动分割算法.首先通过结合径向浅浮槽和区域填充算法得到滤波后图像的大致轮廓,然后通过构造基于区域信息的符号压力函数代替边界停止函数,并且加入了基于边界梯度信息的能量项,有效地克服了弱边界的问题.该模型用二值水平集方法实现,使算法的稳定性更高,计算量大大降低.对前列腺直肠超声图像的实验结果表明:本算法迭代收敛速度快,有效避免了边界泄露问题.