The distinct element method(DEM)has been used successfully for the dynamic analysis of rigid block sys- tems.One of many difficulties associated with DEM is modeling of damping.In this paper,new procedures are propose...The distinct element method(DEM)has been used successfully for the dynamic analysis of rigid block sys- tems.One of many difficulties associated with DEM is modeling of damping.In this paper,new procedures are proposed for the damping modeling and its numerical implementation in distinct element analysis of rigid muhi-block systems.The stiff- ness proportional damping is constructed for the prescribed damping ratio,based on the non-zero fundamental frequency ef- fective during the time interval while the boundary conditions remain essentially constant.At this time interval,the funda- mental frequency can be estimated without complete eigenvalue analysis.The damping coefficients will vary while the damp- ing ratio remains the same throughout the entire analysis.A new numerical procedure is developed to prevent unnecessary energy loss that can occur during the separation phases.These procedures were implemented in the development of the dis- tinet element method for the dynamic analyses of piled multi-block systems.The analysis results |or the single-block and two-block systems were in a good agreement with the analytic predictions.Applications to the seismic analyses of piled four- block systems revealed that the new procedures can make a significant difference and may lead to much-improved results.展开更多
Each joint of hydraulic drive quadruped robot is driven by the hydraulic drive unit(HDU), and the contacting between the robot foot end and the ground is complex and variable, which increases the difficulty of force...Each joint of hydraulic drive quadruped robot is driven by the hydraulic drive unit(HDU), and the contacting between the robot foot end and the ground is complex and variable, which increases the difficulty of force control inevitably. In the recent years, although many scholars researched some control methods such as disturbance rejection control, parameter self-adaptive control, impedance control and so on, to improve the force control performance of HDU, the robustness of the force control still needs improving. Therefore, how to simulate the complex and variable load characteristics of the environment structure and how to ensure HDU having excellent force control performance with the complex and variable load characteristics are key issues to be solved in this paper. The force control system mathematic model of HDU is established by the mechanism modeling method, and the theoretical models of a novel force control compensation method and a load characteristics simulation method under different environment structures are derived, considering the dynamic characteristics of the load stiffness and the load damping under different environment structures. Then, simulation effects of the variable load stiffness and load damping under the step and sinusoidal load force are analyzed experimentally on the HDU force control performance test platform, which provides the foundation for the force control compensation experiment research. In addition, the optimized PID control parameters are designed to make the HDU have better force control performance with suitable load stiffness and load damping, under which the force control compensation method is introduced, and the robustness of the force control system with several constant load characteristics and the variable load characteristics respectively are comparatively analyzed by experiment. The research results indicate that if the load characteristics are known, the force control compensation method presented in this paper has positive compensation effects on the load characteristics variation, i.e., this method decreases the effects of the load characteristics variation on the force control performance and enhances the force control system robustness with the constant PID parameters, thereby, the online PID parameters tuning control method which is complex needs not be adopted. All the above research provides theoretical and experimental foundation for the force control method of the quadruped robot joints with high robustness.展开更多
In this paper,a new system of semi active structural control with active variable stiffness and damping (AVSD) is suggested.This new system amplifies the structural displacement to dissipate more energy,and in turn,ef...In this paper,a new system of semi active structural control with active variable stiffness and damping (AVSD) is suggested.This new system amplifies the structural displacement to dissipate more energy,and in turn,effectively reduces the structural response in the case of relatively small story drifts,which occur during earthquakes.A predictive instantaneous optimal control algorithm is established for a SDOF structure equipped with an AVSD system Comparative shaking table tests of a 1/4 scale single story structural model with a full scale control device have been conducted.From the experimental and analytical results,it is shown that when compared to structures without control or with the active variable stiffness control alone, the suggested system exhibits higher efficiency in controlling the structural response,requires less energy input,operates with higher reliability,and can be manufactured at a lower cost and used in a wider range of engineering applications.展开更多
Labyrinth seal can cause steam-exciting, the structural and operating parameters of labyrinth seal have effect on stability of rotor-system. For investigating the coupling influences of the structure and operating par...Labyrinth seal can cause steam-exciting, the structural and operating parameters of labyrinth seal have effect on stability of rotor-system. For investigating the coupling influences of the structure and operating parameters of labyrinth seals on dynamic coefficients, a model of calculating dynamic coefficients of labyrinth seals is presented using a two control volume model. The coupling influences of parameters on cross-coupled stiffness and direct damping of labyrinth seal are discussed. In the conclusion, a reference of preventing steam-exciting vibration and optimum determination of design parameters of labyrinth seals are provided.展开更多
Water lubricated guide bearings for hydro turbines and pumps are conventionally designed with multiple axial grooves to provide effectively cooling and flushing away abrasives.Due to the variety of groove configuratio...Water lubricated guide bearings for hydro turbines and pumps are conventionally designed with multiple axial grooves to provide effectively cooling and flushing away abrasives.Due to the variety of groove configuration in terms of number and size,a predication of their performance is difficult.This paper deals with an analytical procedure to investigate groove effect on load capacity,stiffness and damping for this type of bearing where it is considered as an assembly of many inclined slide bearings.The result can be applied to bearings made of hard materials combined with low bearing pressure.展开更多
Existing studies primarily focus on stiffness and damping under full-film lubrication or dry contact conditions.However,most lubricated transmission components operate in the mixed lubrication region,indicating that b...Existing studies primarily focus on stiffness and damping under full-film lubrication or dry contact conditions.However,most lubricated transmission components operate in the mixed lubrication region,indicating that both the asperity contact and film lubrication exist on the rubbing surfaces.Herein,a novel method is proposed to evaluate the time-varying contact stiffness and damping of spiral bevel gears under transient mixed lubrication conditions.This method is sufficiently robust for addressing any mixed lubrication state regardless of the severity of the asperity contact.Based on this method,the transient mixed contact stiffness and damping of spiral bevel gears are investigated systematically.The results show a significant difference between the transient mixed contact stiffness and damping and the results from Hertz(dry)contact.In addition,the roughness significantly changes the contact stiffness and damping,indicating the importance of film lubrication and asperity contact.The transient mixed contact stiffness and damping change significantly along the meshing path from an engaging-in to an engaging-out point,and both of them are affected by the applied torque and rotational speed.In addition,the middle contact path is recommended because of its comprehensive high stiffness and damping,which maintained the stability of spiral bevel gear transmission.展开更多
In this paper, a new hybrid control technique, based on a combination of base-isolation and semi-active variable stiffness/damping in a superstructure, is presented. To illustrate the efficiency of the proposed contro...In this paper, a new hybrid control technique, based on a combination of base-isolation and semi-active variable stiffness/damping in a superstructure, is presented. To illustrate the efficiency of the proposed control system, model tests on a mini-electromagnetic shaking table and a numerical simulation were performed. The test and numerical calculation results indicate that this new hybrid control mode with additional damping and smaller additional stiffness can achieve a better control efficiency.展开更多
Modified rotor kit Bently Nevada was used for dynamic characteristics measurements of new developed aerostatic bearings.Mathematical model of these bearings is considered as linear.Model was identified with the help o...Modified rotor kit Bently Nevada was used for dynamic characteristics measurements of new developed aerostatic bearings.Mathematical model of these bearings is considered as linear.Model was identified with the help of harmonic force excitation independently from the speed of journal rotation.The stiffness and damping matrices were identified for different air inlet pressures.The calculated spectral properties allow to determine the stability boundary for suitable variation of model parameters.展开更多
With rigorous dynamic performance of mechanical products,it is important to identify dynamic parameters exactly.In this paper,a response surface plotting method is proposed and it can be applied to identify the dynami...With rigorous dynamic performance of mechanical products,it is important to identify dynamic parameters exactly.In this paper,a response surface plotting method is proposed and it can be applied to identify the dynamic parameters of some nonlinear systems.The method is based on the principle of harmonic balance method(HBM).The nonlinear vibration system behaves linearly under the steady-state response amplitude,which presents the equivalent stiffness and damping coefficient.The response surface plot is over two-dimensional space,which utilizes excitation as the vertical axis and the frequency as the horizontal axis.It can be applied to observe the output vibration response data.The modal parameters are identified by the response surface plot as linearity for different excitation levels,and they are converted into equivalent stiffness and damping coefficient for each resonant response.Finally,the HBM with first-order expansion is utilized for identification of stiffness and damping coefficient of nonlinear systems.The classical nonlinear systems are applied in the numerical simulation as the example,which is used to verify its effectiveness and accuracy.An application of this technique for nonlinearity identification by experimental setup is also illustrated.展开更多
文摘The distinct element method(DEM)has been used successfully for the dynamic analysis of rigid block sys- tems.One of many difficulties associated with DEM is modeling of damping.In this paper,new procedures are proposed for the damping modeling and its numerical implementation in distinct element analysis of rigid muhi-block systems.The stiff- ness proportional damping is constructed for the prescribed damping ratio,based on the non-zero fundamental frequency ef- fective during the time interval while the boundary conditions remain essentially constant.At this time interval,the funda- mental frequency can be estimated without complete eigenvalue analysis.The damping coefficients will vary while the damp- ing ratio remains the same throughout the entire analysis.A new numerical procedure is developed to prevent unnecessary energy loss that can occur during the separation phases.These procedures were implemented in the development of the dis- tinet element method for the dynamic analyses of piled multi-block systems.The analysis results |or the single-block and two-block systems were in a good agreement with the analytic predictions.Applications to the seismic analyses of piled four- block systems revealed that the new procedures can make a significant difference and may lead to much-improved results.
基金Supported by National Key Basic Research Program of China(973 Program,Grant No.2014CB046405)State Key Laboratory of Fluid Power and Mechatronic Systems(Zhejiang University)Open Fund Project(Grant No.GZKF-201502)Hebei Military and Civilian Industry Development Funds Projects of China(Grant No.2015B060)
文摘Each joint of hydraulic drive quadruped robot is driven by the hydraulic drive unit(HDU), and the contacting between the robot foot end and the ground is complex and variable, which increases the difficulty of force control inevitably. In the recent years, although many scholars researched some control methods such as disturbance rejection control, parameter self-adaptive control, impedance control and so on, to improve the force control performance of HDU, the robustness of the force control still needs improving. Therefore, how to simulate the complex and variable load characteristics of the environment structure and how to ensure HDU having excellent force control performance with the complex and variable load characteristics are key issues to be solved in this paper. The force control system mathematic model of HDU is established by the mechanism modeling method, and the theoretical models of a novel force control compensation method and a load characteristics simulation method under different environment structures are derived, considering the dynamic characteristics of the load stiffness and the load damping under different environment structures. Then, simulation effects of the variable load stiffness and load damping under the step and sinusoidal load force are analyzed experimentally on the HDU force control performance test platform, which provides the foundation for the force control compensation experiment research. In addition, the optimized PID control parameters are designed to make the HDU have better force control performance with suitable load stiffness and load damping, under which the force control compensation method is introduced, and the robustness of the force control system with several constant load characteristics and the variable load characteristics respectively are comparatively analyzed by experiment. The research results indicate that if the load characteristics are known, the force control compensation method presented in this paper has positive compensation effects on the load characteristics variation, i.e., this method decreases the effects of the load characteristics variation on the force control performance and enhances the force control system robustness with the constant PID parameters, thereby, the online PID parameters tuning control method which is complex needs not be adopted. All the above research provides theoretical and experimental foundation for the force control method of the quadruped robot joints with high robustness.
文摘In this paper,a new system of semi active structural control with active variable stiffness and damping (AVSD) is suggested.This new system amplifies the structural displacement to dissipate more energy,and in turn,effectively reduces the structural response in the case of relatively small story drifts,which occur during earthquakes.A predictive instantaneous optimal control algorithm is established for a SDOF structure equipped with an AVSD system Comparative shaking table tests of a 1/4 scale single story structural model with a full scale control device have been conducted.From the experimental and analytical results,it is shown that when compared to structures without control or with the active variable stiffness control alone, the suggested system exhibits higher efficiency in controlling the structural response,requires less energy input,operates with higher reliability,and can be manufactured at a lower cost and used in a wider range of engineering applications.
基金This project is supported by National Natural Science Foundation of China(59990472). Manuscript received on November 30, 1999 r
文摘Labyrinth seal can cause steam-exciting, the structural and operating parameters of labyrinth seal have effect on stability of rotor-system. For investigating the coupling influences of the structure and operating parameters of labyrinth seals on dynamic coefficients, a model of calculating dynamic coefficients of labyrinth seals is presented using a two control volume model. The coupling influences of parameters on cross-coupled stiffness and direct damping of labyrinth seal are discussed. In the conclusion, a reference of preventing steam-exciting vibration and optimum determination of design parameters of labyrinth seals are provided.
文摘Water lubricated guide bearings for hydro turbines and pumps are conventionally designed with multiple axial grooves to provide effectively cooling and flushing away abrasives.Due to the variety of groove configuration in terms of number and size,a predication of their performance is difficult.This paper deals with an analytical procedure to investigate groove effect on load capacity,stiffness and damping for this type of bearing where it is considered as an assembly of many inclined slide bearings.The result can be applied to bearings made of hard materials combined with low bearing pressure.
基金This research was supported by the National Natural Science Foundation of China(NSFC,No.51875369)by the Chongqing Key Industry General Key Technology Innovation Special Major R&D Projects(No.cstc2017zdcy-zdzxX0001)Wei Pu would also like to thank the Fundamental Research Funds for the Central Universities(No.YJ201752)。
文摘Existing studies primarily focus on stiffness and damping under full-film lubrication or dry contact conditions.However,most lubricated transmission components operate in the mixed lubrication region,indicating that both the asperity contact and film lubrication exist on the rubbing surfaces.Herein,a novel method is proposed to evaluate the time-varying contact stiffness and damping of spiral bevel gears under transient mixed lubrication conditions.This method is sufficiently robust for addressing any mixed lubrication state regardless of the severity of the asperity contact.Based on this method,the transient mixed contact stiffness and damping of spiral bevel gears are investigated systematically.The results show a significant difference between the transient mixed contact stiffness and damping and the results from Hertz(dry)contact.In addition,the roughness significantly changes the contact stiffness and damping,indicating the importance of film lubrication and asperity contact.The transient mixed contact stiffness and damping change significantly along the meshing path from an engaging-in to an engaging-out point,and both of them are affected by the applied torque and rotational speed.In addition,the middle contact path is recommended because of its comprehensive high stiffness and damping,which maintained the stability of spiral bevel gear transmission.
基金Societal Commonweal Fund Project (2001DIB20098) Earthquake Science Associate Fund (603011)
文摘In this paper, a new hybrid control technique, based on a combination of base-isolation and semi-active variable stiffness/damping in a superstructure, is presented. To illustrate the efficiency of the proposed control system, model tests on a mini-electromagnetic shaking table and a numerical simulation were performed. The test and numerical calculation results indicate that this new hybrid control mode with additional damping and smaller additional stiffness can achieve a better control efficiency.
文摘Modified rotor kit Bently Nevada was used for dynamic characteristics measurements of new developed aerostatic bearings.Mathematical model of these bearings is considered as linear.Model was identified with the help of harmonic force excitation independently from the speed of journal rotation.The stiffness and damping matrices were identified for different air inlet pressures.The calculated spectral properties allow to determine the stability boundary for suitable variation of model parameters.
文摘With rigorous dynamic performance of mechanical products,it is important to identify dynamic parameters exactly.In this paper,a response surface plotting method is proposed and it can be applied to identify the dynamic parameters of some nonlinear systems.The method is based on the principle of harmonic balance method(HBM).The nonlinear vibration system behaves linearly under the steady-state response amplitude,which presents the equivalent stiffness and damping coefficient.The response surface plot is over two-dimensional space,which utilizes excitation as the vertical axis and the frequency as the horizontal axis.It can be applied to observe the output vibration response data.The modal parameters are identified by the response surface plot as linearity for different excitation levels,and they are converted into equivalent stiffness and damping coefficient for each resonant response.Finally,the HBM with first-order expansion is utilized for identification of stiffness and damping coefficient of nonlinear systems.The classical nonlinear systems are applied in the numerical simulation as the example,which is used to verify its effectiveness and accuracy.An application of this technique for nonlinearity identification by experimental setup is also illustrated.