Bearing Capacity of Mixed Pile with Stiffness Core

To study load transfer mechanism and bearing capacity of a mixed pile with stiffness core （MPSC）, which is formed by inserting a precast reinforced concrete pile （PRCP）, in-situ tests involving MPSCs with different lengths, diameters, water cement ratios and PRCPs, cement mixed piles, and drilling hole piles, were carried out. Limit bearing capacities, load-settlement curves and stress distribution of MPSCs and mixed piles were obtained. The load transfer between cement soil and PRCP was analyzed by finite element method （FEM）. Test results and FEM analysis show that an MPSC has fully utilized the big friction from a cement mixed pile and the high compressive strength from a PRCP which transfers outer top load into the inner cement soil, and that inserting a PRCP into a mixed pile changes the stress distribution of a mixed pile and improves frictional resistance between a mixed pile and soil. The length and the section area on PRCP of an MPSC both have an optimum value. Adopting MPSC is effective in improving the bearing capacity of soft soil ground.

Cyclic Lateral Responses of Monopiles Considering the Influence of Pile−Soil Relative Stiffness in Sand

The existing studies have primarily focused on the effect of cyclic load characteristics(namely,cyclic load ratio and amplitude ratio)on cyclic lateral response of monopiles in sand,with little attention paid to the effect of pile−soil relative stiffness(K_(R)).This paper presents a series of 1-g cyclic tests aimed at improving understanding of the cyclic lateral responses of monopiles under different pile−soil systems.These systems are arranged by two model piles with different stiffness,including four different slenderness ratios(pile embedded length,L,normalized by diameter,D)under medium dense sand.The K_(R)-values are calculated by a previously proposed method considering the real soil stress level.The test results show that the lateral accumulation displacement increases significantly with the increment of the K_(R)-value,while the cyclic secant stiffness performs inversely.The maximum pile bending moment increases with the cycle number for the rigid pile−soil system,but shows a decreasing trend in the flexible system.For an uppermost concern,an empirical model is proposed to predict the accumulated displacement of arbitrary pile−soil systems by combining the results from this study with those from previous experimental investigations.The validity of the proposed model is demonstrated by 1-g and centrifuge tests.

Perturbation analysis on post-buckling behavior of pile

The nonlinear large deflection differential equation, based on the assumption that the subsoil coefficient is the 2nd root of the depth, was established by energy method. The perturbation parameter was introduced to transform the equation to a series of linear differential equations to be solved, and the deflection function according with the boundary condition was considered. Then, the nonlinear higher-order asymptotic solution of post-buckling behavior of a pile was obtained by parameter-substituting. The influencing factors such as bury-depth ratio and stiffness ratio of soil to pile, slenderness ratio on the post-buckling behavior of a pile were analyzed. The results show that the pile is more unstable when the bury-depth ratio and stiffness ratio of soil to pile increase, and although the buckling load increases with the stiffness of soil, the pile may ruin for its brittleness. Thus, in the region where buckling behavior of pile must be taken into account, the high grade concrete is supposed to be applied, and the dynamic buckling behavior of pile needs to be further studied.

Dynamic Analysis of a Single-Column Platform

In this paper, a single-column structure used as well-head platform is studied. The loads of wave and current exerted on the single-column will be greatly reduced, therefore the cost of the structure will be decreased. The advantages of the single-column structure compared with ordinary jacket structure are explained. A dynamic analysis of this type of structure is made and some problems related to dynamic analysis are solved. In order to check the reliability of computation theory and programme, model tests have been carried out. However, as space is limited, the conclusion of tests will be introduced in another paper. Therefore, this type of structure is applicable for proctical engineering.