Theoretical verification of the rationality of strain energy storage index as rockburst criterion based on linear energy storage law

The rationality of using strain energy storage index(Wet)for evaluating rockburst proneness was theoretically verified based on linear energy storage(LES)law in this study.The LES law is defined as the linear relationship between the elastic strain energy stored inside the solid material and the input strain energy during loading.It is used to determine the elastic strain energy and dissipated strain energy of rock specimens at various loading/unloading stress levels.The results showed that the Wetvalue obtained from experiments was close to the corresponding theoretical one from the LES law.Furthermore,with an increase in the loading/unloading stress level,the ratio of elastic strain energy to dissipated strain energy converged to the peak-strength strain energy storage index(Wp et).This index is stable and can better reflect the relative magnitudes of the stored energy and the dissipated energy of rocks at the whole pre-peak stage than the strain energy storage index.The peak-strength strain energy storage index can replace the conventional strain energy storage index as a new index for evaluating rockburst proneness.

Peak-strength strain energy storage index for evaluating coal burst liability based on the linear energy storage law

The strain energy storage index WET was widely used to evaluate coal burst liability,but the scientific evidence for selecting the unloading stress level interval(around 80%of peak strength)remains lacking,and WET can not reflect the energy storage and dissipation ratio(ESD ratio)of the whole pre-peak stage for coal materials.In this study,these two key problems in WET calculation and application were solved based on the linear energy storage(LES)law.The LES law was defined as the linear relationship between the elastic strain energy and input strain energy for solid material during loading.Using the LES law,the elastic strain energy and dissipated strain energy of at 10 types of coals were calculated precisely,and ideal ESD ratio and general ESD ratio at any stress level will be obtained subsequently.The results also show that WET is extremely close to the ideal and general ESD ratio,which proves that the selecting stress level of WET calculation is scientific and reasonable.Furthermore,the general ESD ratio converges to the peak ESD ratio(namely peak strain energy storage index WET P)as stress level increases.Compared with WET,Wp ET not only reflects the ESD ratio of coal materials over the whole pre-peak loading stage,but also exhibits excellent stability.Consequently,Wp ET is suggested as a new evaluation index of coal burst liability.

Experimental study on energy storage and dissipation characteristics of granite under two-dimensional compression with constant confining pressure

To study the energy storage and dissipation characteristics of deep rock under two-dimensional compression with constant confining pressure,the single cyclic loading-unloading two-dimensional compression tests were performed on granite specimens with two height-to-width(H/W)ratios under five confining pressures.Three energy density parameters(input energy density,elastic energy density and dissipated energy density)in the axial and lateral directions of granite specimens under different confining pressures were calculated using the area integral method.The experimental results show that,for the specimens with a specific H/W ratio,these three energy density parameters in the axial and lateral directions increase nonlinearly with the confining pressure as quadratic polynomial functions.Under constant confining pressure compression,the linear energy storage law of granite specimens in the axial and lateral directions was founded.Using the linear energy storage law in different directions,the elastic energy density in various directions(axial elastic energy density,lateral elastic energy density and total elastic energy density)of granite under any specific confining pressures can be calculated.When the H/W ratio varies from 1:1 to 2:1,the lateral compression energy storage coefficient increases and the corresponding axial compression energy storage coefficient decreases,while the total compression energy storage coefficient is almost independent of the H/W ratio.

Experiments on rockburst proneness of pre-heated granite at different temperatures: Insights from energy storage, dissipation and surplus

Many underground engineering projects show that rockburst can occur in rocks at great depth and high temperature, and temperature is a critical factor affecting the intensity of rockburst. In general, temperature can affect the energy storage, dissipation, and surplus in rock. To explore the influence of temperature on the energy storage and dissipation characteristics and rockburst proneness, the present study has carried out a range of the uniaxial compression(UC) and single-cyclic loading-unloading uniaxial compression(SCLUC) tests on pre-heated granite specimens at 20℃-700℃. The results demonstrate that the rockburst proneness of pre-heated granite initially increases and subsequently decreases with the increase of temperature. The temperature of 300℃ has been found to be the threshold for rockburst proneness. Meanwhile, it is found that the elastic strain energy density increases linearly with the total input strain energy density for the pre-heated granites, confirming that the linear energy property of granite has not been altered by temperature. According to this inherent property, the peak elastic strain energy of pre-heated granites can be calculated accurately. On this basis, utilising the residual elastic energy index, the rockburst proneness of pre-heated granite can be determined quantitatively. The obtained results from high to low are: 317.9 k J/m^(3)(300℃), 264.1 k J/m^(3)(100℃), 260.6 k J/m^(3)(20℃), 235.5 k J/m^(3)(500℃), 158.9 k J/m^(3)(700℃), which are consistent with the intensity of actual rockburst for specimens. In addition, the relationship between temperature and energy storage capacity(ESC) of granite was discussed, revealing that high temperature impairs ESC of rocks, which is essential for reducing the rockburst proneness. This study provides some new insights into the rockburst proneness evaluation in high-temperature rock engineering.

A new criterion of coal burst proneness based on the residual elastic energy index

To evaluate the coal burst proneness more precisely,a new energy criterion namely the residual elastic energy index was proposed.This study begins by performing the single-cyclic loading-unloading uniaxial compression tests with five pre-peak unloading stress levels to explore the energy storage characteristics of coal.Five types of coals from different mines were tested,and the instantaneous destruction process of the coal specimens under compression loading was recorded using a high speed camera.The results showed a linear relationship between the elastic strain energy density and input energy density,which confirms the linear energy storage law of coal.Based on this linear energy storage law,the peak elastic strain energy density of each coal specimen was obtained precisely.Subsequently,a new energy criterion of coal burst proneness was established,which was called the residual elastic energy index(defined as the difference between the peak elastic strain energy density and post peak failure energy density).Considering the destruction process and actual failure characteristics of coal specimens,the accuracy of evaluating coal burst proneness based on the residual elastic energy index was examined.The results indicated that the residual elastic energy index enables reliable and precise evaluations of the coal burst proneness.