The factors affecting storage modulus (Ec') and quantitative characterization of polymer composites filled with inorganic particles were discussed in this paper. On the basis of Eshelby’s method and Mori’s work,...The factors affecting storage modulus (Ec') and quantitative characterization of polymer composites filled with inorganic particles were discussed in this paper. On the basis of Eshelby’s method and Mori’s work, an equation describing the relationship between the Ec' and the filler volume fraction, particle geometry as well as interfacial morphology was proposed. The Ec' of the glass bead filled low-density-polyethylene (LDPE/GB) composites was estimated by means of this equation under experimental conditions with temperature range of –150-100?C, frequency of 1 Hz and the amplitude of 0.6 mm, and compared with other equations proposed in literature. The results showed that the predictions for this equation were close to the measured data from the LDPE/GB composites.展开更多
The mobility of polymer chain segments is shown to play a major role in the diffusion ofdisperse dyes in a copolymerization modified PET system, monoepoxy compoundCH_3 (CH_3),OCH_2CH--CH_2 modified PET. The rate of dy...The mobility of polymer chain segments is shown to play a major role in the diffusion ofdisperse dyes in a copolymerization modified PET system, monoepoxy compoundCH_3 (CH_3),OCH_2CH--CH_2 modified PET. The rate of dye diffusion (diffusion coefficient D) hasbeen related to the time-dependent mechanical property, dynamic loss modulus E', which iscontrolled by the mobility of chain segments. In this modified copolyester system, the variance ofamount of modifier in the copolyester fibers causes the change in disperse dye diffusion coefficientto fiber, and in the dynamic loss modulus of the fibers, but the relationship between the diffusionand the dynamic loss modulus is in agreement with the theoretical relation derived by Bell andDumbleton. The relation obtained in this paper is:Ln D=-2. 28Ln E'+26. 81展开更多
Biodegradable Mg-Zn alloy was synthesized using mechanical alloying where a statistical model was developed using fractional factorial design to predict elastic modulus and mass loss of the bulk alloy.The effects of m...Biodegradable Mg-Zn alloy was synthesized using mechanical alloying where a statistical model was developed using fractional factorial design to predict elastic modulus and mass loss of the bulk alloy.The effects of mechanical alloying parameters(i.e.,milling time,milling speed,ball-to-powder mass ratio and Zn content)and their interactions were investigated involving 4 numerical factors with 2 replicates,thus 16 runs of two-level fractional factorial design.Results of analysis of variance(ANOVA),regression analysis and R2 test indicated good accuracy of the model.The statistical model determined that the elastic modulus of biodegradable Mg-Zn alloy was between 40.18 and 47.88 GPa,which was improved and resembled that of natural bone(30-57 GPa).Corrosion resistance(mass loss of pure Mg,33.74 mg)was enhanced with addition of 3%-10%Zn(between 9.32 and 15.38 mg).The most significant independent variable was Zn content,and only the interaction of milling time and ball-to-powder mass ratio was significant as P-value was less than 0.05.Interestingly,mechanical properties(represented by elastic modulus)and corrosion resistance(represented by mass loss)of biodegradable Mg-Zn alloy can be statistically predicted according to the developed models.展开更多
Magnetorheological elastomers(MREs)hold significant promise in various fields such as automotive engineering,and civil engineering,where they serve as intelligent materials.Depending on the application of an external ...Magnetorheological elastomers(MREs)hold significant promise in various fields such as automotive engineering,and civil engineering,where they serve as intelligent materials.Depending on the application of an external magnetic field,these materials exhibit varying magnetorheological and viscoelastic properties,including shear stress,yield stress,dynamic moduli,and damping.In this work,a new type of MRE,termed self-healing MREs(SH-MREs),has been developed by adding a novel self-healing agent into existing MREs.The dynamic modulus and loss factor of SH-MREs with different compositions have been characterized under various conditions of frequency,temperature,and strain.The results show that as the strain value increases,the loss factor also increases.Moreover,the loss factor initially increases and then decreases with increasing magnetic field strength.Although higher concentrations of ferromagnetic particles increase the loss factor,they enhance the operational range due to their better responsiveness to magnetic fields.SH-MREs demonstrate improved damping capabilities,attributed to the formation of coordination bonds between ferromagnetic particles and the self-healing agent.The stable structure increases the viscosity of MREs.The results of the regression model suggest a direct proportionality between sensitivity to the magnetic field and the ferromagnetic particle concentration.展开更多
文摘The factors affecting storage modulus (Ec') and quantitative characterization of polymer composites filled with inorganic particles were discussed in this paper. On the basis of Eshelby’s method and Mori’s work, an equation describing the relationship between the Ec' and the filler volume fraction, particle geometry as well as interfacial morphology was proposed. The Ec' of the glass bead filled low-density-polyethylene (LDPE/GB) composites was estimated by means of this equation under experimental conditions with temperature range of –150-100?C, frequency of 1 Hz and the amplitude of 0.6 mm, and compared with other equations proposed in literature. The results showed that the predictions for this equation were close to the measured data from the LDPE/GB composites.
文摘The mobility of polymer chain segments is shown to play a major role in the diffusion ofdisperse dyes in a copolymerization modified PET system, monoepoxy compoundCH_3 (CH_3),OCH_2CH--CH_2 modified PET. The rate of dye diffusion (diffusion coefficient D) hasbeen related to the time-dependent mechanical property, dynamic loss modulus E', which iscontrolled by the mobility of chain segments. In this modified copolyester system, the variance ofamount of modifier in the copolyester fibers causes the change in disperse dye diffusion coefficientto fiber, and in the dynamic loss modulus of the fibers, but the relationship between the diffusionand the dynamic loss modulus is in agreement with the theoretical relation derived by Bell andDumbleton. The relation obtained in this paper is:Ln D=-2. 28Ln E'+26. 81
基金supported by the Universiti Sains Malaysia RU-PRGS (No. 8046026)Universiti Sains Malaysia FRGS by Ministry of High Education, Malaysia (No. 6071304)
文摘Biodegradable Mg-Zn alloy was synthesized using mechanical alloying where a statistical model was developed using fractional factorial design to predict elastic modulus and mass loss of the bulk alloy.The effects of mechanical alloying parameters(i.e.,milling time,milling speed,ball-to-powder mass ratio and Zn content)and their interactions were investigated involving 4 numerical factors with 2 replicates,thus 16 runs of two-level fractional factorial design.Results of analysis of variance(ANOVA),regression analysis and R2 test indicated good accuracy of the model.The statistical model determined that the elastic modulus of biodegradable Mg-Zn alloy was between 40.18 and 47.88 GPa,which was improved and resembled that of natural bone(30-57 GPa).Corrosion resistance(mass loss of pure Mg,33.74 mg)was enhanced with addition of 3%-10%Zn(between 9.32 and 15.38 mg).The most significant independent variable was Zn content,and only the interaction of milling time and ball-to-powder mass ratio was significant as P-value was less than 0.05.Interestingly,mechanical properties(represented by elastic modulus)and corrosion resistance(represented by mass loss)of biodegradable Mg-Zn alloy can be statistically predicted according to the developed models.
基金the National Natural Science Foundation of China(No.52003142).
文摘Magnetorheological elastomers(MREs)hold significant promise in various fields such as automotive engineering,and civil engineering,where they serve as intelligent materials.Depending on the application of an external magnetic field,these materials exhibit varying magnetorheological and viscoelastic properties,including shear stress,yield stress,dynamic moduli,and damping.In this work,a new type of MRE,termed self-healing MREs(SH-MREs),has been developed by adding a novel self-healing agent into existing MREs.The dynamic modulus and loss factor of SH-MREs with different compositions have been characterized under various conditions of frequency,temperature,and strain.The results show that as the strain value increases,the loss factor also increases.Moreover,the loss factor initially increases and then decreases with increasing magnetic field strength.Although higher concentrations of ferromagnetic particles increase the loss factor,they enhance the operational range due to their better responsiveness to magnetic fields.SH-MREs demonstrate improved damping capabilities,attributed to the formation of coordination bonds between ferromagnetic particles and the self-healing agent.The stable structure increases the viscosity of MREs.The results of the regression model suggest a direct proportionality between sensitivity to the magnetic field and the ferromagnetic particle concentration.
