Seismic Liquefaction Resistance Based on Strain Energy Concept Considering Fine Content Value Effect and Performance Parametric Sensitivity Analysis

Liquefaction is one of the most destructive phenomena caused by earthquakes,which has been studied in the issues of potential,triggering and hazard analysis.The strain energy approach is a common method to investigate liquefaction potential.In this study,two Artificial Neural Network(ANN)models were developed to estimate the liquefaction resistance of sandy soil based on the capacity strain energy concept(W)by using laboratory test data.A large database was collected from the literature.One group of the dataset was utilized for validating the process in order to prevent overtraining the presented model.To investigate the complex influence of fine content(FC)on liquefaction resistance,according to previous studies,the second database was arranged by samples with FC of less than 28%and was used to train the second ANN model.Then,two presented ANN models in this study,in addition to four extra available models,were applied to an additional 20 new samples for comparing their results to show the capability and accuracy of the presented models herein.Furthermore,a parametric sensitivity analysis was performed through Monte Carlo Simulation(MCS)to evaluate the effects of parameters and their uncertainties on the liquefaction resistance of soils.According to the results,the developed models provide a higher accuracy prediction performance than the previously publishedmodels.The sensitivity analysis illustrated that the uncertainties of grading parameters significantly affect the liquefaction resistance of soils.

Strain-rate Sensitivity of Aluminum 2024-T6/TiB_2 Composites and Aluminum 2024-T6

Strain-rate sensitivities of 55vol%-65vol% aluminum 2024-T6/TiB2 composites and the corresponding aluminum 2024-T6 matrix were investigated using split Hopkinson pressure bar method. The experimental results showed that 55vol%-65vol% aluminum 2024-T6/TiB2 composites exhibited significant strain-rate sensitivities, which were three times higher than the strain-rate sensitivity of the aluminum 2024-T6 matrix. The strain-rate sensitivity of the aluminum 2024-T6 matrix composites rose obviously with increasing reinforcement content（up to 60%）, which agreed with that from the previous researches. But it decreased as the ceramic reinforcement content reached 65%. After high strain rates compression, a large number of dislocations and micro-cracks were found inside the matrix and the Ti B2 particles, respectively. These micro-cracks can accelerate the brittle fracture of the composites. The aluminum 2024-T6/Ti B2 composites showed various fracture characteristics and shear instability was the predominant failure mechanism under dynamic loading.

The strain rate sensitive and anisotropic behavior of rare-earth magnesium alloy ZEK100 sheet

To overcome the limitation in formability at room temperature,manufacturers have developed magnesium alloys with remarkable properties by adding rare-earth elements.The rare-earth magnesium alloys behave differently from the conventional alloys,especially with respect to their coupled anisotropic and strain rate sensitive behavior.In the current work,such behavior of the rare-earth Mg alloy ZEK100 sheet at room temperature is investigated with the aid of the elastic viscoplastic self-consistent polycrystal plasticity model.Different strain rate sensitivities(SRSs)for various deformation modes are employed by the model to simulate the strain rate sensitive behaviors under different loading directions and loading rates.Good agreement between the experiments and simulations reveals the importance and necessity of using different SRSs for each deformation mode in hexagonal close-packed metals.Furthermore,the relative activities of each deformation mode and the texture evolution during different loadings are discussed.The anisotropic and strain rate sensitive behavior is ascribed to the various operating deformation modes with different SRSs during loading along different directions.

Irradiation effect on strain sensitivity coefficient of strain sensing fiber Bragg gratings

The effect of irradiation on the strain sensitivity coefficient of strain sensing fiber Bragg gratings （FBGs） has been investigated through experiments. FBGs were fabricated in single mode fibers with 3 tool% Ge-concentration in the core and with a H2-1oading treatment. In experiments, the FBGs were subjected to y-radiation exposures using a Co6~ source at a dose-rate of 25 Gy/min up to a total dose of 10.5 kGy. The GeO defect in fiber absorbs photons to form a GeE＇ defect; the interaction with H2 is a probable reason for the y-radiation sensitivity of gratings written in hydrogen loaded fibres, The effect mechanism of radiation on the strain sensitivity coefficient is similar to that of radiation on the temperature sensitivity coefficient. Radiation affects the effective index neff, which results in the change of the thermo-optic coefficient and the strain-optic coefficient. Irradiation can change the strain sensitivity coefficient of FBGs by 1.48%-2.71%, as well as changing the Bragg wavelength shift （BWS） by 22 pm-25 pm under a total dose of 10.5 kGy. Our research demonstrates that the effect of irradiation on the strain sensitivity coefficient of FBG is small and that strain sensing FBGs can work well in the radiation environment.

Strain hardening behavior, strain rate sensitivity and hot deformation maps of AISI 321 austenitic stainless steel

Hot compression tests were performed on AISI 321 austenitic stainless steel in the deformation temperature range of 800–1200℃ and constant strain rates of 0.001,0.01,0.1,and 1 s^(−1).Hot flow curves were used to determine the strain hardening exponent and the strain rate sensitivity exponent,and to construct the processing maps.Variations of the strain hardening exponent with strain were used to predict the microstructural evolutions during the hot deformation.Four variations were distinguished reflecting the different microstructural changes.Based on the analysis of the strain hardening exponent versus strain curves,the microstructural evolutions were dynamic recovery,single and multiple peak dynamic recrystallization,and interactions between dynamic recrystallization and precipitation.The strain rate sensitivity variations at an applied strain of 0.8 and strain rate of 0.1 s^(−1) were compared with the microstructural evolutions.The results demonstrate the existence of a reliable correlation between the strain rate sensitivity values and evolved microstructures.Additionally,the power dissipation map at the applied strain of 0.8 was compared with the resultant microstructures at predetermined deformation conditions.The microstructural evolutions strongly correlated to the power dissipation ratio,and dynamic recrystallization occurred completely at lower power dissipation ratios.

Strain rate sensitivity of closed cell aluminium fly ash foam

With the increasing use of metal foams in various engineering applications, investigation of their dynamic behaviour under varying strain rate is necessary. Closed cell aluminium fly ash foam developed through liquid metallurgy route was investigated for its stress--strain behaviour at different strain rates ranging from 700 s^-1 to 1950 s^-1. The numerical model of split Hopkinson pressure bar （SHPB） was simulated using commercially available finite element code Abaqus/Explicit. Validation of numerical simulation was carried out using available experimental and numerical results. Full scale stress--strain curves wez＇e developed for various strain rates to study the effect of strain rate on compressive strength and energy absorption. The results showed that the closed cell aluminium fly ash foam is sensitive to strain rate.

STRAIN RATE SENSITIVITY OF ULTRAFINE-GRAINED Cu WITH NANOSIZED TWINS

An ultrafine-grained Cu sample with a high density of growth twins was synthesized by means of pulsed electrodeposition technique. The strain rate sensitivity of the Cu sample was measured by strain rate cycling tests under tension. The effects of grain size as well as twin density on the strength and strain rate sensitivity were discussed.

Electric-magnetic-force characteristics of rare earth barium copper oxide superconductor high-field coils based on screening effect and strain sensitivity

Rare earth barium copper oxide(REBCO)is the most researched and commercialized second-generation high-temperature superconducting material.Due to the anisotropic structure,strong deformation sensitivity,and central field errors caused by screening current effects,it is still a challenge for commercialization applications.In this study,the transversely isotropic constitutive relationship is selected as the mechanical model based on the structural characteristics of REBCO tapes,and suitable microelements are selected to equate the elastic constants using their average stress-strain relationships.Then,a two-dimensional axisymmetric model for coils wound by single-layer tapes is constructed to analyze the dependence of the electric-magnetic-force distribution in the tape on the strain.Finally,the anisotropic approximation of the homogenized bulk method is used to equate large-turn high-field coils,and the electric-magnetic-force distribution characteristics of the coils with/without screening effects and mechanical strain conditions are investigated,respectively.The results reveal that the mechanical strain has a weakening effect on the electromagnetic field distribution of superconducting tapes,but causes a significant enhancement in the force field distribution.In the presence of 0.5% mechanical strain,the maximum weakening of the peak value of the current density and the critical current density inside the high-field coil can reach about 8% and 13%,respectively,with a nearly 5 times increase in the peak stress.The screening current makes the current field distribution inside the coil improve by about 10 times.The screening current induced magnetic field can reach up to 0.8 T,making the relative error of the high-field coil center up to 7.8%.

O^6-METHYLGUANINE-DNA METHYLTRANSFERASE ACTIVITY AND SENSITIVITY OF 20 CHINESE TUMOR CELL STRAINS TO 1-(4-AMINO-2-METHYL-5-PYRIMIDINYL) METHYL-3-(2-CHLOROETHYL)-3-NITROSOUREA

O6-methylguanine-DNA methyltransferase (MGMT) plays an important role in repairing alkylated DNA. MGMT activity as well as cellular sensitivity to 1- ( 4- amino- 2-methyl-5-pyrimidinyl) methyl-3- ( 2-chloroethyl)-3-nitrosourea (ACNU) of 20 Chinese tumor cell strains were assayed. A linear response between MGMT activity and ACNU sensitivity (D10) was observed. The lower the MGMT activity In the cells, the more the sensitivity to ACNU killing. It suggested that assay of MGMT activity in tumor biopsy could be used as a guide to predict the effectiveness of ACNU treatment in chemotherapy of human cancer.

Strain rate sensitivity and activation volume of electrodeposited nanocrystalline Ni and Ni-Co alloys

Tensile deformation behaviors of the electrodeposited 40 nm grain sized Ni,25 nm Ni-1.7 wt.%Co,and 13 nm Ni-8.6 wt.%Co alloys at various strain rates and room temperature were reviewed with emphasis on strain rate sensitivity and activation volume,respectively.It is found that the strain rate sensitivity and activation volume were strongly grain size dependent.An analytic model based on the bow out of a single dislocation well predicted the relationship between the strain rate sensitivity and the activation volumes for these nanocrystaline metals.

Effect of Strain－Rate Sensitivity on Deformation Localization in Porous Materials

The deformation localization in strain-rate sensitive porous materials is analyzed based on the lower bound approach proposed by the author. The retarding effect of material viscosity on deformation localization and the influence of the material strain-rate sensitivity factor on the critical strain to localized necking and the shear localization are investigated. Consideration concerning the material inhomogeneity and the void nucleation effect is also given. Finally the fracture strains of the plane strain tension specimens of AISI4340 steels are calculated and the results are compared with those of the experiment and of Gurson's equations.

Construction of laser-induced graphene/silver nanowire composite structures for low-strain,high-sensitivity flexible wearable strain sensors

Sandwich-structured flexible sensors based on graphene have high sensitivity and stability.When graphene is combined with a flexible substrate in a sandwich structure,the weak bonding between them compromises the sensor's stability and sensitivity at low strains.This presents challenges in monitoring subtle physiological activities,such as hand bending and pulse rate.For this purpose,laser-induced graphene(LIG)is proposed to be used to prepare flexible sensors in order to improve the sensitivity and stability of the sensors at low strains.Polydimethylsiloxane(PDMS)with low modulus and polyimide(PI)with rich carbon content are selected as precursor materials for LIG,and graphene is formed through laser induction.Subsequently,silver nanowires(Ag NWs)solution is added to LIG to give the sensor low strain and high sensitivity performance.When the PI/PDMS ratio is 1:3,the Ag NWs/LIG flexible strain sensor exhibits excellent sensitivity(GF=778.468)over a small strain range(8.76%-11.25%).Meanwhile,the sensor still shows excellent stability after 2000 cycle experiments.The Ag NWs/LIG flexible strain sensor shows good performance when placed on the back of the hand,around the eyes,etc.It is demonstrated that Ag NWs/LIG flexible strain sensors have good application potential in human physiological activity monitoring,health management and medical fields,and provide a low-strain,high-sensitivity sensor design strategy for flexible wearable devices.

A switchable high-sensitivity strain sensor based on piezotronic resonant tunneling junctions

Developing emerging technologies in Internet of Things and artificial intelligence requires high-speed, low-power, high-sensitivity, and switchable-functionality strain sensors capable of sensing subtle mechanical stimuli in complex ambience. Resonant tunneling diodes (RTDs) are the good candidate for such sensing applications due to the ultrafast transport process, lower tunneling current, and negative differential resistance. However, notably enhancing sensing sensitivity remains one of the greatest challenges for RTD-related strain sensors. Here, we use piezotronic effect to improve sensing performance of strain sensors in double-barrier ZnO nanowire RTDs. This strain sensor not only possesses an ultrahigh gauge factor (GF) 390 GPa^(−1), two orders of magnitude higher than these reported RTD-based strain sensors, but also can switch the sensitivity with a GF ratio of 160 by adjusting bias voltage in a small range of 0.2 V. By employing Landauer–Büttiker quantum transport theory, we uncover two primary factors governing piezotronic modulation of resonant tunneling transport, i.e., the strain-mediated polarization field for manipulation of quantized subband levels, and the interfacial polarization charges for adjustment of space charge region. These two mechanisms enable strain to induce the negative differential resistance, amplify the peak-valley current ratio, and diminish the resonant bias voltage. These performances can be engineered by the regulation of bias voltage, temperature, and device architectures. Moreover, a strain sensor capable of electrically switching sensing performance within sensitive and insensitive regimes is proposed. This study not only offers a deep insight into piezotronic modulation of resonant tunneling physics, but also advances the RTD towards highly sensitive and multifunctional sensor applications.

Highly sensitive and stretchable piezoelectric strain sensor enabled wearable devices for real-time monitoring of respiratory and heartbeat simultaneously

The World Health Organization has declared COVID-19 a pandemic.The demand for devices or systems to diagnose and track COVID-19 infections noninvasively not only in hospitals but also in home settings has led to increased interest in consumer-grade wearables.A common symptom of COVID-19 is dyspnea,which may manifest as an increase in respiratory and heart rates.In this paper,a novel piezoelectric strain sensor is presented for real-time monitoring of respiratory and heartbeat signals.A highly sensitive and stretchable piezoelectric strain sensor is fabricated using a piezoelectric film with a serpentine layout.The thickness of the patterned PVDF flexible piezoelectric strain sensor is only 168μm,and the voltage sensitivity reaches 0.97 mV/με.The effective modulus is 13.5 MPa,which allows the device to fit to the skin and detect the small strain exhibited by the human body.Chest vibrations are captured by the piezoelectric sensor,which produces an electrical output voltage signal conformally mapped with respiratory–cardiac activities.The separate heart activity and respiratory signals are extracted from the mixed respiratory–cardiac signal by an empirical mode decomposition data processing algorithm.By detecting vital signals such as respiratory and heart rates,the proposed device can aid early diagnosis and monitoring of respiratory diseases such as COVID-19.

Material embrittlement in high strain-rate loading

Material embrittlement is often encountered in machining,heat treatment,hydrogen and lowtemperature conditions among which machining is strain-rate related.More strain-rate evoked embrittlement is expected in material loading processes,such as in high-speed machining and projectile penetration.In order to understand the fundamental mechanisms of the strain-rate evoked material embrittlement,this study is concerned with the material responses to loading at high strain-rates.It then explores the strain-rate evoked material embrittlement and fragmentation during high strain-rate loading processes and evaluates various empirical and physical models from different researchers for the assessment of the material embrittlement.The study proposes strain-rate sensitivity for the characterization of material embrittlement and the concept of the pseudo embrittlement for material responses to very high strain-rates.A discussion section is arranged to explore the underlying mechanisms of the strain-rate evoked material embrittlement and fragmentation based on dislocation kinetics.

High sensitive fiber strain sensor using suspended-core fibers

A novel fiber strain sensor is proposed, based on the two-mode interference of a suspended-core fiber. A fullvectorial finite difference mode solver is employed as the numerical tool for characterizing the proposed strain sensor. The numerical results show that the proposed strain sensor has an estimated sensitivity of 0.05 rad/（m-με）, higher than that of the strain sensors using conventional multimode fibers, while the temperature sensitivity of the proposed sensor is relatively low.

STRAIN RATE SENSITIVTTY OF POLYCRYSTALLINE AND SINGLE CRYSTAL NiAl

The compressive and tensile strain rate sensitivities of polycrystalline and single crystal NiAl have been evaluated at 877 ℃ which is well above DBTT. Samples were prepared to specific sizes by hot press consolidation of appropriate powder sizes and minimizing past consolidation thermal exposures. NiAl single crystals were grown in the [100]orientation using a modified Bridgeman technique. The yield and tensile strength of polycrystalline NiAl as a function of grain size generally follows a Hall-Petch type relationship . A tensile strain rate effect was found at strain rate of 1 to 10-4 sec-1. The strain rate sensitivity coefficient, m,in the equation of σ = Kε is in the range of 0. 10 to 0. 13. The highest strain rate (1 sec-1) resulted in significantly higher strengths and little or no observed ductility. Compressive strain rate testing al strain rate of 10-5to 10-2 sec-1 and at temperature of 1050°to 1250°K was conducted both for polycrystalline and for single crystal NiAl. The calculated stress exponents and the activation energy for creep were compared with the reference data.

A QUASI-FLOW CONSTITUTIVE MODEL WITH STRAIN-RATE DEPENDENCE

In this paper,the proposed is a quasi-flow constitutive model with strain-rate sen- sitivity for elastic plastic large deformation.The model is based on the Quasi-flow Corner theory, and is suitable for the sheet metal forming process simulation with a variable punch machine velocity. Uniaxial tensile tests and deep-drawing tests of a circular blank with square punch are carried out and numerically simulated.The consistency between the experimental and the numerically simulated results shows the validity of the present new constitutive model.

Expression of cyclooxygenase-2 mRNA in drug-sensitive cell and drug-resistant strains of ovarian cancer cell lines

Objective： To investigate the expression of cyclooxygenase-2 （COX-2） mRNA in drug-sensitive cell and drugresistant clones of ovarian cancer cell lines. Methods： RT-PCR and immunocytochemistry were used to investigate the expression of cyclooxygenase-2 in 3 clones drug-sensitive and 5 clones drug-resistant ovarian cancer cell. Results： Strong COX-2 mRNA expressions were detected in 3 clones of drug-sensitive cell and weak expressions were detected in 5 clones of drug-resistant cell. The protein expression of COX-2 in drug-sensitive cell was strongly positive reaction in immunocytochemistry stain and there was a weak positive reaction in 5 clones of drug-resistant cell. Conclusion： The expression of COX-2 mRNA in drug-sensitive cell strains is much higher than that in drugresistant strains of ovarian cancer cell lines, providing a basis of the chemoprevention for ovarian cancer.

Advanced test methods of material property characterization:high strain-rate testing and experimental simulation of multiaxial stress states

Optimum utilization of the loading capability of engineering materials is an important and active contribution to protect nature's limited resources,and it is the key for economic design methods.In order to make use of the materials' resources,those must be known very well;but conventional test methods will offer only limited informational value.The range of questions raised is as wide as the application of engineering materials,and partially they are very specific.The development of huge computer powers enables numeric modelling to simulate structural behaviour in rather complex loading environments-so the real material behaviour is known under the given loading conditions.Here the art of material testing design starts.To study the material behaviour under very distinct and specific loading conditions makes it necessary to simulate different temperature ranges,loading speeds, environments etc.and mostly there doesn't exist any commonly agreed test standard.In this contribution two popular,non-standard test procedures and test systems will be discussed on the base of their application background,special design features as well as test results and typically gained information:The demand for highspeed tests up to 1000 s^(-1) of strain rate is very specific and originates primarily in the automotive industry and the answers enable CAE analysis of crashworthiness of vehicle structures under crash conditions.The information on the material behaviour under multiaxial loading conditions is a more general one.Multiaxial stress states can be reduced to an equivalent stress,which allows the evaluation of the material's constraint and criticality of stress state.Both discussed examples shall show that the open dialogue between the user and the producer of testing machines allows custom-tailored test solutions.