Stream Function Wave Derived by Unified Variational Principle of Water Gravity Wave

Based on the linear wave, solitary wave and fifth order stokes wave derived by use of the Unified Variational Principle of Water Gravity Wave (UVPWGW), this paper derives stream function wave theory by using UVPWGW. This paper will handle the Kinematic Free Surface Boundary Condition (KFSBC) and Dynamic Free Surface Boundary Condition (DFSBC) directly and give the optimum solution, instead of the conditions Sigma(Q(av) - Q(i))(2) = min, and the related equations of stational condition. When the wave height H, period T and water depth D are given, the original stream function wave will be determined, and can not be adjusted if it does not agree with the real case; in the present method, the adjustment can be done by adding several constraint conditions, for example, the wave profile can be adjusted according to the condition of accurate peak position. The examples given in this paper show that for the original stream function wave, the DFSBC can be fairly well satisfied, but the KFSBC can not; however, the stream function wave derived by UVPWGW is better than the original one in the sense of minimum error squares in the aspect of the level at which KFSBC and DFSBC are satisfied.

Quality Stability of Multi-Station Assembly Process Based on Variation Stream

To analyze the physical structure of assembly process and assure product quality, the quality stability of multi-station assembly process was investigated. First, the assembly process was modeled as a one-dimensional discrete variant system by state space equation based on variation stream. Then, the criterion to judge whether the process is stable or not and the index, stability degree, to show the level of stability were proposed by analyzing the bounded-input bounded-output (BIBO) stability of system. Finally, a simulated example of a sheet metal assembly process with three stations, was provided to verify the effectiveness of the proposed method.

Seasonal and Spatial Variation in the Monitoring Parameters of Zomar Stream, Palestine during 2010

Levels of pollutants at Zomar stream, the only recreational area for the inhabitants of the northern part of the West Bank, Palestine, were recently determined, and have shown to be relatively high. Three bathing sites along the Zomar stream area were monitored for one year （fortnightly）. Wastewater samples were subjected to microbiological analysis （fecal coliforms, Escherichia coli, Pseudomonas, Enterococcus and Klebsiella）, physico-chemical analyses （water temperature, pH, electroconductivity and DO （dissolved oxygen））, biochemical oxygen demand, total Kjeldahl nitrogen and ammonia. The study results demonstrated seasonal and locational variations in all parameters studied. The highest levels of pollution were detected during summer, especially before a rainfall or after a discharge from onsite cesspits. Locations associated with sewage discharge were found to have the highest fecal indicator levels.

黄河上游近60年水沙变化特征及其影响因素

由于受人类活动及气候变化影响,黄河上游干流水沙特征发生显著变化。为探究黄河上游水沙变化情况,基于黄河上游5个水文站19642019年水沙、遥感影像等数据,利用Mann-Kendall检验法、滑动t检验法、累积距平曲线和双累积曲线等突变检验方法和小波分析法,对黄河上游水沙变化特征进行研究。利用水沙关系曲线及线性回归法等方法估算人类活动和气候对水沙变化的贡献率,并着重讨论梯级水库建设及土地利用变化对水沙的影响。结果表明:1)黄河上游玛曲-小川段流域内降雨量和径流量变化幅度不明显,贵德站、循化站、小川站19862019年年均输沙量分别减至19641985年的9.8%、24.6%、38.8%,输沙量大大减少。黄河上游玛曲-小川段径流量突变多在1986年,输沙量突变多在1969、1986、2004年,径流量存在8、16、22 a周期,输沙量存在4~8、18~21、27 a周期。2)1969年后,河流输沙能力增强,水沙关系显著改变。在不同时段内,人类活动对径流量变化在19872019年贡献率为66.3%,对输沙量变化在19701986、19872004、20052019年的贡献率为72.96%、70.73%、69.7%。人类活动对黄河上游干流水沙影响占据主导因素。3)刘家峡水库淤积最为严重,单库运行期水库淤积量为2.39亿t,排沙比变化范围为1.39%~10.7%。梯级水库联调使得径流量在19642004年间减少47.8%,19642019年间梯级水库减沙94.8%,梯级水库对输沙量影响远大于对径流量的影响。4)19802020年间,草地面积增加了1880.03 km 2,增幅3.1%,有利于减少输沙量,草地拦沙效益大于截流效益。

多工序制造中的误差流模型及其应用研究进展

航空发动机结构件、汽车车身等复杂产品通常为多工序制造件,其制造过程中多种误差的产生和累积会对产品质量产生耦合影响,使产品质量控制处于暗箱状态。将误差流理论与精度控制理论、工程数据处理方法相结合,构建对误差的传递、累积、湮灭进行描述和分析的误差流模型对于多工序制造复杂产品质量控制具有重要意义。因此,总结和归纳了误差流模型的构建方法及其应用研究,提出了多工序制造的误差流模型质量控制总体框架,从小数据驱动的时间序列数学解析模型和大数据驱动的复杂网络统计分析模型两个方面对多工序制造的误差流模型进行了分类综述。最后,展望了误差流模型在高端装备和复杂产品等未来多工序制造领域中的发展趋势。

基于偏差流分析法(SOVA)的二维多工位装配顺序规划的研究

针对目前产品装配顺序通常从装配时间和装配成本角度来考虑而难以保证装配质量的情形,应用偏差流分析法,以提高装配质量为目标,提出一种新的二维多工位装配顺序优化方法。以多工位装配过程为研究对象,分析影响装配质量的偏差源,建立偏差及其传递的数学模型,应用装配稳健度概念来评价装配工艺流程方案的优劣。以汽车侧围的4个零件装配为例,运用装配稳健度分析、比较了三种不同的装配顺序,得到了较优的装配方案。实例分析和仿真表明,应用装配稳健度可以分析选择装配顺序方案,为优化设计多工位装配工艺流程提供了新的途径。

松花江干流粪大肠菌群时空变化研究

粪大肠菌群普遍存在于人类和温血动物的粪便中,在水环境和水处理过程中与病原体具有相似的稳定性,水质监测中一般选择粪大肠菌群来表征水体微生物安全状况。对2012年-2019年松花江干流开展粪大肠菌群分布特征的研究,结果表明,粪大肠菌群的数量在2.0×10^(2)~2.4×10^(5)MPN/L之间,月达标率69.1%,2012年-2018年达标率呈现上升趋势,2019年略有下降。各断面年际变化规律不一致,总体上2018年和2019年粪大肠菌群数量明显下降。不同水期数量变化规律不同,沿程数量变化呈现“M”型,表现出粪大肠菌群指标受城市生活污水影响明显。存在一定的季节因素影响,自然衰减不明显,人为因素是污染主要原因。2018年后微生物安全基本得到保证,水体的卫生学状况明显改善。

Interannual Meridional Displacement of the East Asian Upper-tropospheric Jet Stream in Summer

On the interannual timescale, the meridional displacement of the East Asian upper-tropospheric jet stream (EAJS) is significantly associated with the rainfall anomalies in East Asia in summer. In this study, using the data from the National Centers for Environmental Prediction-Department of Energy (NCEP/DOE) reanalysis-2 from 1979 to 2002, the authors investigate the interannual variations of the EAJS's meridional displacement in summer and their associations with the variations of the South Asian high (SAH) and the western North Pacific subtropical high (WNPSH), which are dominant circulation features in the upper and lower troposhere, respectively. The result from an EOF analysis shows that the meridional displacement is the most remarkable feature of the interannual variations of the EAJS in each month of summer and in summer as a whole. A composite analysis indicates that the summer (June-July-August, JJA) EAJS index, which is intended to depict the interannual meridional displacement of the EAJS, is not appropriate because the anomalies of the zonal wind at 200 hPa (U200) in July and August only, rather than in June, significantly contribute to the summer EAJS index. Thus, the index for each month in summer is defined according to the location of the EAJS core in each month. Composite analyses based on the monthly indexes show that corresponding to the monthly equatorward displacement of the EAJS, the South Asian high (SAH) extends southeastward clearly in July and August, and the western North Pacific subtropical high (WNPSH) withdraws southward in June and August.

THE COMPARISON OF CHINESE AND EUROPEAN STREAM RUNOFF

This paper compares stream stream runoff in China in terms of drainage basin, water balance, and regional distribution and regime of stream runoff with that in Europe. European stream runoff resources are more abundant than that of China. Europe has 28 rivers with runoff volume exceeding 10 km3, and China only has 19.But Europe has no rivers like those in China which are long andhave abundant waer volume such as Changiiang (Yangtze River) and Zhujiang. Heat conditions of the European water-abundant and water-sufficient zones are poor and their agiculture are not flourishing.In China these zones have very good heat conditions and are main farm production regions. The interannual and annual variation of stream runoff are the sane to the irrespective feedings in Europe and China.

Mineralogy and geochemistry of fine-grained Dahab stream sediments, Southeastern Sinai, Egypt: emphasis on the intergrowths of Fe–Ti oxides

Mineralogical and geochemical characteristics of stream sediments collected from 30 stations in the Dahab-Wadi Kid area(southeastern Sinai,Egypt)are presented.The studied sediments contain considerable amounts of heavy minerals,including abundant Fe–Ti oxides,with up to 25.94%index figure that measures the relative abundance of heavy minerals to light minerals.Immaturity of the sediments and nature of Fe–Ti oxide intergrowths,in addition to some non-opaque heavy minerals,indicate multiple provenances with contributions from a variety of Neoproterozoic mafic to felsic intrusions.Appreciable amounts of heavy minerals are derived from schists that belong to the so-called Wadi Kid volcanosedimentary group.Owing to the considerable contribution of the felsic intrusions represented by within-plate granites,the sediments are enriched in REE-bearing minerals(e.g.,monazite,cerianite,La-cerianite and allanite),V-bearing thorite,zircon,and a ZrO_(2) phase.The majority of Fe–Ti oxides are derived from the mafic intrusions,and they show evidence of pre-,syn-and post-depositional phases of alteration and formation of intergrowths.As to the geochemical signature of the bulk silt fraction,there is remarkable enrichment of LREEs with distinct negative Eu anomaly,and this supports dominance of a provenance dominated by felsic intrusions(i.e.,the A-type within-plate granite and associated pegmatites).Also,the felsic provenance is responsible for slight abnormality of ∑PU+Th content(up to~37 ppm)and few anomalous samples bear uraniferous zircon and Ce-type monazite.The present paper sheds light on the fertility of the Dahab stream sediments in some economic minerals for possible future exploitation,not for gold only,but for potential REEbearing minerals that are needed for a wide spectrum of modern technological industries.

Machining Error Control by Integrating Multivariate Statistical Process Control and Stream of Variations Methodology

For aircraft manufacturing industries, the analyses and prediction of part machining error during machining process are very important to control and improve part machining quality. In order to effectively control machining error, the method of integrating multivariate statistical process control （MSPC） and stream of variations （SoV） is proposed. Firstly, machining error is modeled by multi-operation approaches for part machining process. SoV is adopted to establish the mathematic model of the relationship between the error of upstream operations and the error of downstream operations. Here error sources not only include the influence of upstream operations but also include many of other error sources. The standard model and the predicted model about SoV are built respectively by whether the operation is done or not to satisfy different requests during part machining process. Secondly, the method of one-step ahead forecast error （OSFE） is used to eliminate autocorrelativity of the sample data from the SoV model, and the T2 control chart in MSPC is built to realize machining error detection according to the data characteristics of the above error model, which can judge whether the operation is out of control or not. If it is, then feedback is sent to the operations. The error model is modified by adjusting the operation out of control, and continually it is used to monitor operations. Finally, a machining instance containing two operations demonstrates the effectiveness of the machining error control method presented in this paper.

磷在农田溪流中的动态变化

磷是水体富营养化的限制因子 ,河流系统是农业非点源污染物的主要运移通道 ,污染物在河流中的持留控制着污染物向受纳水体的输出 .本次研究对象是巢湖流域一个长约 1 8km的农田源头溪流六岔河 ,河流由 4个渠道型、1个水塘型和 3个河口型断面构成 ,长度分别为 1 3km、0 1 5km和 0 36km .在河流上设置 9个监测点研究总磷、磷酸盐和悬浮物在六岔河中的持留空间特征 ,评价人为严重干扰下的农田溪流在农业非点源污染物运移中的生态功能 .结果表明 :总磷、磷酸盐、悬浮物在溪流中的持留和释放受溪流的渠道型、水塘型和河口型断面控制 ,水塘型和河口型断面是污染物持留的主要区域 ,总磷、磷酸盐和悬浮物在水塘型、河口型断面内的持留量分别占溪流持留量的 5 8%、77%和 5 8% ;污染物在降雨 径流过程中的持留是溪流持留的主要部分 ,总磷、磷酸盐和悬浮物的持留分别占溪流持留量的 96 %、98%和 93% ;渠道型断面是溪流最主要的内在污染源 ,总磷、磷酸盐和悬浮物的释放分别占溪流释放量的 93%、99%和 94 % ;养分和悬浮物在渠道型断面中具有不同的持留特性 ,而位于水塘前的渠道型断面在基流和降雨 径流过程中均能有效地持留污染物 .

典型岩溶地下河系统暴雨条件下水文水化学动态变化研究

利用HOBO小型自动气象站、WGZ21型光电数字水位计和CTDP300型在线水质监测仪,对典型岩溶槽谷地下河系统暴雨条件下水文水化学动态变化进行了连续监测,运用WATSPAC软件计算方解石饱和指数(SIc)和CO2分压(PCO2)。分析了降雨过程中,地下河系统水文水化学动态变化特征。结果表明:在降雨过程中,地下河系统总体以稀释效应为主,对降雨的响应速度快。其中,地下河入口水化学变化受降雨稀释效应和外界环境因素共同影响,变化复杂。出口水化学变化以稀释效应为主,较入口规律。强降雨初期主要由来自中下游岩溶裂隙和洼地对地下河管道的快速补给;降雨后期和降雨过程结束后主要由来自上游岩口落水洞的注入补给。青木关流域岩溶发育程度高,岩溶管道流畅通性良好。强降雨形成的短时地表产流集中注入、降雨入渗经裂隙的快速补给对地下河水质的好坏造成直接影响。

多工位薄板装配偏差流传递的状态空间模型

借鉴控制理论中的状态空间方法,研究多工位薄板装配过程中偏差流传递、变换和累积关系的状态空间模型。以零件偏差为状态矢量,夹具偏差为控制矢量,研究夹具偏差和零件偏差之间的对应关系以及零件在工位间转换过程中的重定位偏差,建立多工位装配过程偏差流传递的状态方程;以零件测量偏差为输出矢量,建立表征测点位置和数量的输出方程。最后通过实际零件的装配过程说明该模型的应用方法。

轿车车体装配尺寸偏差控制技术

基于偏差流理论 ,针对夹具的优化设计及鲁棒设计、柔性件装配偏差分析与综合、制造过程在线测量、故障诊断和偏差在线补偿 ,从设计和制造并行角度对车体偏差控制进行了系统综述 ,论述了面向设计和面向制造的偏差控制的辩证统一关系。结合所提出的偏差流库和偏差流检测站的概念 ,给出了偏差流控制的系统模型 ,丰富了偏差流理论。

基于误差流理论的多工位装配过程质量稳定性

为适应质量控制对象由产品转向过程的趋势,对多工位装配过程中的质量稳定性问题进行研究。将多工位装配过程视为一维离散时变系统,采用状态空间方程对其进行建模,模型中的系统矩阵包含了装配过程中的物理结构信息。通过对比理想状态和实际情况下的模型,得到装配过程的误差流模型。在此基础上,根据有界输入有界输出(BIBO)稳定性的概念,通过分析过程误差流模型可得到判断过程是否质量稳定的判定条件,并进一步提出衡量质量稳定性优劣的指标—稳定度这一新概念。以汽车白车身装配过程中一个三工位薄壁件装配为例,对所提出的判据和稳定度概念进行仿真验证。

高寒森林溪流微生物群落结构的季节性变化

高寒森林溪流不仅是区域河流的源头,而且是联系陆地与水域的生态纽带。微生物活动可能成为控制溪流生态系统过程的关键因子,但其结构与动态过程缺乏必要关注。因此,结合同步温度动态监测,采用实时荧光定量PCR和DGGE技术,在2014年到2015年冻融季节和生长季节关键时期对比研究了川西高寒森林溪流和森林林下土壤中微生物群落的动态特征。研究结果发现,高寒森林溪流具有较低的真菌和细菌群落丰度;与森林土壤相同,溪流在冻融季节表现出相对生长季节更高的真菌/细菌比,而且从冻融季节到生长季节,溪流微生物丰度动态也表现出明显的季节性变化特征。与森林土壤不同的是,溪流中细菌和真菌的丰度及其Shannon-Wiener多样性指数的最高值均出现在生长季节而不是冬季冻融季节,并且溪流中细菌丰度在季节性变化的不同时期具有显著差异(P<0.05)。此外,森林土壤细菌类群以芽孢杆菌属(Bacillus sp.)比例相对较高,真菌类群则以格孢菌属(Pleosporales sp.)、曲霉属(Aspergillus sp.)和其他一些子囊菌门(Ascomycota)的类群为优势;而溪流细菌类群以红球菌属(Rhodococcus sp.)为主,真菌类群则以曲霉属和空团菌属(Cenococcum sp.)为主。同时,季节性变化中温度、p H、水溶性有机碳和溶解氧等环境因子可显著影响溪流微生物群落结构及其组成,这些环境因子在高寒森林溪流微生物群落的季节性变化过程中具有重要的作用。

水文模型系统在峨嵋河流域洪水模拟中的应用

研究目的是采用水文模型系统(HMS)模拟峨嵋河流域暴雨水文过程,并为长江上游地区气候和水文响应研究提供可靠的信息。HMS是一种分布式水文模型可用于研究各种气候因子和地表覆盖变化而引起的水文过程响应,该系统(HMS)利用气象、土壤类型、土地利用和地表覆盖、数字高程(DEM)和降雨径流等资料,研究气候、陆面、地表水和地下水的相互作用机理。在本次研究中,采用SCS Curve Number(CN)和Green-Ampt(GA)方法来计算径流过程,用GIS来数字化DEM、土壤、土地利用和陆地覆盖数据。通过用不同时间间隔的降雨和不同计算方法的水力参数模拟水文过程,来检验降雨的时间尺度效应和水力参数的空间变异性对水文过程的影响。结果表明,HMS对峨嵋河流域暴雨洪水的模拟及预测具有较好的适用性。

基于状态空间模型的航天器装配角偏误差研究

装配过程的误差建模是分析装配误差的重要手段之一。通过分析影响航天器装配结果的尺寸和形位误差、装夹定位误差,将其装配的偏差源分为夹具装夹误差和舱段制造误差两类。并将不同形式的误差通过虚拟夹具的概念进行了统一的表达,进而基于误差流理论针对航天器舱段建立其误差传播的状态空间模型,求出了该过程的状态空间表达式,应用该模型对装配过程中的角偏误差进行了分析。将分析得到的结果同蒙特卡洛仿真的结果进行了比较,两种方法的相对误差小于3%,说明了该方法的可行性。该方法的优势在于它不仅可以分析复杂装配过程,还可以对各工位的装配效果进行观测,从而进行向后分析。

近50年来淮河干流径流演变规律分析

基于淮河干流1956-2008年的实测径流资料,从不均匀性和集中程度等方面分析了径流年内分配的时空变化特征,并采用Mann-Kendall非参数检验和距平累积等方法对径流年际变化的趋势性与阶段性进行定性和定量分析。结果表明:(1)淮河干流径流年内分配极不均衡,年际变化较为剧烈。汛期径流量约占年径流量的63%,而最小年径流量仅占多年平均径流量的14.0%～18.2%。1980年以后,径流年内分配不均匀性与集中程度进一步加剧,空间差异有所减小,而集中期则延迟于7月份。(2)年径流量总体表现出递减的变化趋势,且中游递减趋势较上游明显,但均不显著。四季径流量变化趋势与变化幅度不尽相同,息县站和王家坝站仅在春季呈现递减趋势,而鲁台子站与吴家渡站在春、秋季均呈现递减趋势。总体而言,枯水期径流量的进一步减少将加剧流域水资源的供需矛盾。(3)年径流量序列中存在2个持续丰水时段和3个持续枯水时段,且持续枯水时段较持续丰水时段要长。在1996-2008年间,年径流量丰枯交替变化频繁,这主要与该时段流域内降水量年际变化大、旱涝交替出现有关。