Surpass Streamline血流导向术对颅内动脉瘤的疗效

目的了解Surpass Streamline血流导向术对颅内动脉瘤的疗效。方法选取2020年1月至2022年1月安徽医科大学附属宿州医院68例接受Surpass Streamline血流导向装置治疗的颅内动脉瘤患者。收集临床资料,观察患者术前术后血流动力学参数变化,以及术前和术后3、6、12个月的改良Rankin量表(mRS)评分变化,分析患者的影像学资料,观察动脉瘤闭塞情况。结果与术前相比较,患者术后的WSS、瘤颈血流速度降低,LSA、RRT、载瘤动脉及患侧M1的血流速度增加(P<0.05),而患者术前、术后对侧M1血流速度比较差异无统计学意义(P>0.05)。术后,随着时间的延长,患者的mRS评分为低级别占比逐渐增高,差异有统计学意义(P<0.05)。术后6个月及12个月患者的支架内狭窄发生率分别为7.35%、8.82%,动脉瘤完全闭塞发生率分别为52.94%、63.24%,差异无统计学意义(P>0.05)。68例患者经Surpass Streamline血流导向术治疗后,4例出现缺血性并发症,其中2例表现为视物模糊、皮质盲,1例为肢体无力,1例支架内血栓,经干预治疗均得到有效缓解。结论采用Surpass Streamline血流导向术治疗颅内动脉瘤有较好的疗效,能改善血流动力学,术后动脉瘤完全闭塞率较高,且安全性较好,值得临床推广。

Numerical investigation on the aerodynamic drag reduction based on bottom deflectors and streamlined bogies of a high-speed train

The complex structure of the bottom of a high-speed train is an important source of train aerodynamic drag.Thus,improving the bottom structure is of great significance to reduce the aerodynamic drag of the train.In this study,computational fluid dynamics(CFD)based on three-dimensional steady incompressible Reynolds-average Naiver-Stokes(RANS)equations and Realizable k-ε turbulence model were utilized for numerical simulations.Inspired by the concept of streamlined design and the idea of bottom flow field control,this study iteratively designed the bogies in a streamlined shape and combined them with the bottom deflectors to investigate the joint drag reduction mechanism.Three models,i.e.,single-bogie model,simplified train model,and eight-car high-speed train model,were created and their aerodynamic characteristics were analyzed.The results show that the single-bogie model with streamlined design shows a noticeable drag reduction,whose power bogie and trailer bogie experience 13.92%and 7.63%drag reduction,respectively.The range of positive pressure area on the bogie is reduced.The aerodynamic drag can be further reduced to 15.01%by installing both the streamlined bogie and the deflector on the simplified train model.When the streamlined bogies and deflectors are used on the eight-car model together,the total drag reduction rate reaches 2.90%.Therefore,the proposed aerodynamic kit for the high-speed train bottom is capable to improve the flow structure around the bogie regions,reduce the bottom flow velocity,and narrow the scope of the train’s influence on the surrounding environment,achieving the appreciable reduction of aerodynamic drag.This paper can provide a new idea for the drag reduction of high-speed trains.

Mathematical Model of Hydrodynamic Torque Converter and Analytic Description of Streamline

The mathematical model of a 3-element centripetal-turbine hydrodynamic torque converter and analytic description of fluid flow inside the hydrodynamic torque converter are investigated. A new torus coordinate system is proposed so as to quantitatively describe fluid movement inside the hydrodynamic torque converter. The particle movement inside the hydrodynamic torque converter is decomposed into meridional component movement and torus component movement, and a universal meridional streamline equation is derived. According to the relationship between the converter wheel velocity polygon and its blade angle, a torus streamline differential equation is established. The universal meridional streamline equation is approximated with square polynomials. The approximation error curve is given and the percentage error is not greater than 0.86%. Considered as a function of polar angle, the blade angle cotangent of each converter wheel varies linearly with polar angle. By using integral calculus, torus streamline equations are obtained. As a result, the problem of difficult flow description of the hydrodynamic torque converter is solved and a new analytic research system is established.

Well production optimization using streamline features-based objective function and Bayesian adaptive direct search algorithm

Well production optimization is a complex and time-consuming task in the oilfield development.The combination of reservoir numerical simulator with optimization algorithms is usually used to optimize well production.This method spends most of computing time in objective function evaluation by reservoir numerical simulator which limits its optimization efficiency.To improve optimization efficiency,a well production optimization method using streamline features-based objective function and Bayesian adaptive direct search optimization(BADS)algorithm is established.This new objective function,which represents the water flooding potential,is extracted from streamline features.It only needs to call the streamline simulator to run one time step,instead of calling the simulator to calculate the target value at the end of development,which greatly reduces the running time of the simulator.Then the well production optimization model is established and solved by the BADS algorithm.The feasibility of the new objective function and the efficiency of this optimization method are verified by three examples.Results demonstrate that the new objective function is positively correlated with the cumulative oil production.And the BADS algorithm is superior to other common algorithms in convergence speed,solution stability and optimization accuracy.Besides,this method can significantly accelerate the speed of well production optimization process compared with the objective function calculated by other conventional methods.It can provide a more effective basis for determining the optimal well production for actual oilfield development.

Streamline DEAE对蛋白酶复合物的吸附平衡研究

以人凝血酶原复合物(以下简称PCC)为目标产物,研究了扩张床用离子交换树脂Streamline DEAE对蛋白酶复合物的吸附平衡。测定了不同温度下的吸附等温线和吸附动力学曲线,并通过计算求得热力学和动力学参数。结果表明:Streamline DEAE对PCC的吸附符合Langmuir模型,吸附反应的焓热变为34.466 kJ/mol;吸附动力学曲线用拟二级速率方程拟和有着较好的吻合度。吸附过程中蛋白质分子在树脂颗粒内部的扩散为控制步骤,求得吸附反应的表观活化能为29.089 kJ/mol,表明此Streamline DEAE对PCC的吸附具有反应速率快,性能稳定等特点。

格调&自豪 斯堪尼亚全新Streamline系列登陆中国

2013年11月22日,斯堪尼亚揭开专为中国市场精心配置的全新Streamline长途运输车系列的神秘面纱,树立了燃油经济性新标准。之前斯堪尼亚推出的欧3系列堪称节能方面的市场领先产品,而与之相比,斯堪尼亚全新Streamline可将燃油经济性提高达7%。燃油经济性的改进甚至将车用尿素成本考虑在内,同时,废气排放水平符合欧4排放标准。彰显王者风范的Highline驾驶室,符合空气动力学的流线型设计,外观时尚、内部空间宽敞舒适。据悉,全新Streamline系列将于2014年初在中国正式上市。

Streamlines in the Two-Dimensional Spreading of a Thin Fluid Film: Blowing and Suction Velocity Proportional to the Spatial Gradient of the Height

The aim of this investigation is to determine the effect of fluid leak-off (suction) and fluid injection (blowing) at the horizontal base on the two-dimensional spreading under the gravity of a thin film of viscous incompressible fluid by studying the evolution of the streamlines in the thin film. It is assumed that the normal component of the fluid velocity at the base is proportional to the spatial gradient of the height of the film. Lie symmetry methods for partial differential equations are applied. The invariant solution for the surface profile is derived. It is found that the thin fluid film approximation is satisfied for weak to moderate leak-off and for the whole range of fluid injection. The streamlines are derived and plotted by solving a cubic equation numerically. For fluid injection, there is a dividing streamline originating at the stagnation point at the base which separates the flow into two regions, a lower region consisting mainly of rising fluid and an upper region consisting mainly of descending fluid. An approximate analytical solution for the dividing streamline is derived. It generates an approximate V-shaped surface along the length of the two-dimensional film with the vertex of each section the stagnation point. It is concluded that the fluid flow inside the thin film can be visualised by plotting the streamlines. Other models relating the fluid velocity at the base to the height of the thin film can be expected to contain a dividing streamline originating at a stagnation point and dividing the flow into a lower region of rising fluid and an upper region of descending fluid.

THE FINITE DIFFERENCE STREAMLINE DIFFUSION METHODS FOR TIME-DEPENDENT CONVECTION-DIFFUSION EQUATIONS

In this paper, two finite difference streamline diffusion (FDSD) schemes for solving two-dimensional time-dependent convection-diffusion equations are constructed. Stability and optimal order error estimati-ions for considered schemes are derived in the norm stronger than L^2-norm.

Numerical simulation of two-phase flow in fractured porous media using streamline simulation and IMPES methods and comparing results with a commercial software

Streamline simulation is developed to simulate waterflooding in fractured reservoirs. Conventional reservoir simulation methods for fluid flow simulation in large and complex reservoirs are very costly and time consuming. In streamline method, transport equations are solved on one-dimensional streamlines to reduce the computation time with less memory for simulation. First, pressure equation is solved on an Eulerian grid and streamlines are traced. Defining the "time of flight", saturation equations are mapped and solved on streamlines. Finally, the results are mapped back on Eulerian grid and the process is repeated until the simulation end time. The waterflooding process is considered in a fractured reservoir using the dual porosity model. Afterwards, a computational code is developed to solve the same problem by the IMPES method and the results of streamline simulation are compared to those of the IMPES and a commercial software. Finally, the accuracy and efficiency of streamline simulator for simulation of two-phase flow in fractured reservoirs has been proved.

Study of the mechanisms of streamline-adjustment-assisted heterogeneous combination flooding for enhanced oil recovery for post-polymer-flooded reservoirs

Streamline-adjustment-assisted heterogeneous combination flooding is a new technology for enhanced oil recovery for post-polymer-flooded reservoirs.In this work,we first carried out a series of 2D visualization experiments for different chemical flooding scenarios after polymer flooding.Then,we explored the synergistic mechanisms of streamline-adjustment-assisted heterogeneous combination flooding for enhanced oil recovery and the contribution of each component.Test results show that for single heterogeneous combination flooding,the residual oil in the main streamline area after polymer flooding is ready to be driven,but it is difficult to be recovered in the non-main streamline area.Due to the effect of drainage and synergism,the streamline-adjustment-assisted heterogeneous combination flooding diverts the injected chemical agent from the main streamline area to the non-main streamline area,which consequently expands the active area of chemical flooding.Based on the results from the single-factor contribution of the quantitative analysis,the contribution of temporary plugging and profile control of branched preformed particle gels ranks in the first place and followed by the polymer profile control and the effect of streamline adjustment.On the contrary,the surfactant contributes the least to enhance the efficiency of oil displacement.

STREAMLINE DIFFUSION F.E.M. FOR SOBOLEV EQUATIONS WITH CONVECTION DOMINATED TERM

In this paper,a streamline diffusion F.E.M. for linear Sobolev equations with convection dominated term is given.According to the range of space time F.E mesh parameter h ,two choices for artifical diffusion parameter δ are presented,and for the corresponding computation schemes the stability and error estimates in suitable norms are estabilished.

Effect of Streamlined Nose Length on the Aerodynamic Performance of a 800 km/h Evacuated Tube Train

The aerodynamic resistance of a train running in the open air limits the maximum speed that can be attained by the train.For this reason,evacuated tube trains(ETT)are being considered as valid alternatives to be implemented in the future.The atmosphere in the tube,the so-called blocking ratio and the length of the streamlined nose are the key factors affecting the aerodynamic performances of these trains.In the present work,we investigate evacuated tube trains with different lengths of the streamline nose on the basis of computational fluid dynamics(CFD).The three-dimensional steady compressible Navier-Stokes equations are solved.The running speed of the ETT is 800 km/h and the blocking ratio is 0.2.Results show that with the increase of the streamlined nose length,the aerodynamic drag and lift forces of the head car decrease gradually,and the drag and lift forces of the middle car change slightly.For the tail car,the drag force decreases,whereas the absolute value of the lift force increases.At a speed of 800 km/h,a slight shock wave appears at the rear of the tail car,which affects the aerodynamic forces acting on the train.

Influence of aerodynamic configuration of a streamline box girder on bridge flutter and vortex-induced vibration

Streamline box girders are widely applied in the design and construction of long-span bridges all over the world. In order to study the influence of modifications of aerodynamic configuration and accessory components on flutter and vortex-induced vibration （VIV）, more than 60 cases were tested through a 1：50 scale section model. The test results indicates that the aerodynamic configuration and accessory components of streamline box girders can signifi- cantly affect the wind-induced vibration of bridge, which is in good agreement with the experience of past researchers. From the tests carried out, it is observed that if the horizontal angle of the inclined web of the streamline box girder is below 16°, the critical flutter wind speed of bridge will increase remarkably, and the VIV will diminish. The test results also show that the 15° inclined web can restrain the formation of vortex near the tail, and consequently improve the performance of aerodynamic stability of long-span bridges. Finally, a new streamline box girder with 15° inclined web was presented and strongly recommended in the aerodynamic configuration design of long-span bridges.

Study on increasing calculation precision and convergence speed of streamline strip element method

The calculation precision and convergence speed of streamline strip element method are increased by (using) the method whose initial value of the exit lateral displacement is determined with strip element variation method, and the accurate tension lateral distribution model is adopted based on the original third power spline function streamline strip element method. The basic theory of the strip element method is developed. The calculated results by the improved streamline strip element method and the original streamline strip element method are compared with the measured results, showing that the calculated results of the improved method are in good agreement with the measured results.

A streamline diffusion nonconforming finite element method for the time-dependent linearized Navier-Stokes equations

A nonconforming finite element method of finite difference streamline diffusion type is proposed to solve the time-dependent linearized Navier-Stokes equations. The backward Euler scheme is used for time discretization. Crouzeix-Raviart nonconforming finite element approximation, namely, nonconforming （P1）2 - P0 element, is used for the velocity and pressure fields with the streamline diffusion technique to cope with usual instabilities caused by the convection and time terms. Stability and error estimates are derived with suitable norms.

AN APPLICATION OF TOPOLOGICAL ANALYSIS TO STUDYING THE THREE-DIMENSIONAL FLOW IN CASCADES;PART I—TOPOLOGICAL RULES FOR SKIN-FRICTION LINES AND SECTION STREAMLINES

Based on the working of Lighthill and Hunt et al., in the present paper the author has established the topological rules adapting to analysing the skin-friction lines and the section streamlines in cascades. These rules are (1) for a rotor cascade without shroud band, the total number of nodal points equals that the saddle points on the skin-friction line vector fields in eachpitch range; (2) for an annular or straight cascade with no-clearances at blade ends, the total number of saddle points is two more than that of nodal points on the skin-friction line fields in a pitch; (3) the total number of saddles in the secondary flow fields on cross-sections in cascade is one less than that of nodes; (4) in the section streamline vector fields on a meridian surface penetrating a flow passage, and on leading and trailing edge sections, the total number of nodes is equal to that of saddles; (5) on the streamline vector fields of a blade-to-blade surface, the total number of nodes is one less than that of saddles.

Finite difference streamline diffusion method using nonconforming space for incompressible time-dependent Navier-Stokes equations

This paper proposes a new nonconforming finite difference streamline diffusion method to solve incompressible time-dependent Navier-Stokes equations with a high Reynolds number. The backwards difference in time and the Crouzeix-Raviart （CR） element combined with the P0 element in space are used. The result shows that this scheme has good stabilities and error estimates independent of the viscosity coefficient.

Streamline upwind finite element method using 6-node triangular element with adaptive remeshing technique for convective-diffusion problems

A streamline upwind finite element method using 6-node triangular element is presented. The method is applied to the convection term of the governing transport equation directly along local streamlines. Several convective-diffusion examples are used to evaluate efficiency of the method. Results show that the method is monotonic and does not produce any oscillation. In addition, an adaptive meshing technique is combined with the method to further increase accuracy of the solution, and at the same time, to minimize computational time and computer memory requirement.

Streamline upwind finite element method for conjugate heat transfer problems

This paper presents a combined finite element method for solving conjugate heat transfer problems where heat conduction in a solid is coupled with heat convection in viscous fluid flow. The streamline upwind finite element method is used for the analysis of thermal viscous flow in the fluid region, whereas the analysis of heat conduction in solid region is performed by the Galerkin method. The method uses the three-node triangular element with equal-order interpolation functions for all the variables of the velocity components, the pressure and the temperature. The main advantage of the proposed method is to consistently couple heat transfer along the fluid-solid interface. Three test cases, i.e. conjugate Couette flow problem in parallel plate channel, counter-flow in heat exchanger, and conjugate natural convection in a square cavity with a conducting wall, are selected to evaluate the efficiency of the present method.

Design and Experiment of Streamlined Piezoelectric Pump with Low Vortex and Large Flow Rate

Valveless piezoelectric pump is widely used in the medical,however,there is a general and difficult problem to be solved:Low vortex and large flow rate are not compatible,resulting in the blood prone to thrombosis during blood delivery.In this paper,a new valveless piezoelectric(PZT)pump with streamlined flow tubes(streamlined pump)is proposed.The design method and the working principle of the pump are analyzed.The velocity streamlines are simulated,and the results demonstrate that there are no obvious vortexes in the flow tube of the streamlined pump.Five prototype pumps(two cone pumps and three streamlined pumps)are designed and fabricated to perform flow rate and flow resistance experiments.The experimental results illustrate that the maximum flow rate of the streamlined pump is 142 mL/min,which is 179%higher than that of the cone piezoelectric pump,demonstrating that the streamlined pump has a large flow rate performance.This research provides an inspiration for future research on simple structure,low vortex and large flow rate volume-type pumps,and also provides a useful solution for thrombosis preventing.