The strength loss mechanism of the phosphate bonded sand mold/core was studied. The morphology and composition of phosphate membrane on the surface of sands was analyzed with electron probe X-ray microanalyzer. Result...The strength loss mechanism of the phosphate bonded sand mold/core was studied. The morphology and composition of phosphate membrane on the surface of sands was analyzed with electron probe X-ray microanalyzer. Results show that magnesium causes cracks in cured phosphate membrane and results in the decrease of sand molds/cores strength. However, the addition of magne-sium significantly enhanced hygroscopy resistance of phosphate membrane. In addition, the phosphate binder added with the magnesium modifier has more rapid hardening reaction speed compared that without or with low magnesium binder. It can be concluded that the phosphate binder with the addition of magnesium modifier is favorably used in high humid and cold circumstance.展开更多
Sandstone is widely distributed in cold regions and the freeze-thaw deterioration of them has caused many geological engineering disasters.As an important and direct index of frost resistance,the strength loss of sand...Sandstone is widely distributed in cold regions and the freeze-thaw deterioration of them has caused many geological engineering disasters.As an important and direct index of frost resistance,the strength loss of sandstones under freeze-thaw actions should be investigated to provide a guidance for the stability assessment of geological engineering.In this research,the UCS(Uniaxial compressive strength)loss of six typical sandstones with different water contents after 0,20,40 and 60 freeze-thaw cycles was measured in the laboratory.The experimental results indicated that the freeze-thaw damage was more serious in sandstones containing high water contents,and the critical saturations for causing a significant loss of UCS under freeze-thaw were 60%-80%for these sandstones.Below this critical saturation,the UCS loss of the sandstones was mainly caused by water weakening rather than freeze-thaw damage.Besides,a developed strength prediction model was proposed by combining the exponential decay function and multiple linear regression method.The initial porosity,elastic modulus and tensile strength of fresh sandstones were a good parameter combination to accurately determine the decay constant in this developed model.The main novelty of this model is that it can accurately and easily estimate the UCS loss of sandstones after any freeze-thaw cycle only using the initial parameters of fresh sandstones,but it does not need to perform freeze-thaw and mechanical strength experiments.This study not only provides an accurate prediction model of UCS under freeze-thaw,but also makes a contribution to better understanding the frost resistance mechanism of sandstones.展开更多
In this experimental work, three groups of cement-slag mortars namely OPC, OPC-slag, and slag mortars were made. All were cured in both water and air under room temperature. Strength development was studied up to 90 d...In this experimental work, three groups of cement-slag mortars namely OPC, OPC-slag, and slag mortars were made. All were cured in both water and air under room temperature. Strength development was studied up to 90 days. The mortars were prepared using 0%, 50%, and 100% replacement with slag. The sensitivity for all groups was obtained against the curing regime with the highest being attributed to the slag mortars. The highest and lowest strengths at early ages were attributed to OPC and slag mortars when both were cured in water. The highest and lowest strengths were attributed to OPC-slag and slag mortars at later ages, respectively. The highest strengths for OPC-slag, OPC, and slag mortars were as 72.0, 64.0, and 21.5 MPa at 90 days when the specimens cured in water, respectively. Strength loss was observed for all groups at later ages when cured in air under room temperature. The maximum and minimum, of about 8.0% and 1.3%, occurred at 56 and 90 days for slag and OPC-slag mortars, respectively.展开更多
基金Funded by the Natural Science Foundation of Hubei Province (No. 2005ABA056)
文摘The strength loss mechanism of the phosphate bonded sand mold/core was studied. The morphology and composition of phosphate membrane on the surface of sands was analyzed with electron probe X-ray microanalyzer. Results show that magnesium causes cracks in cured phosphate membrane and results in the decrease of sand molds/cores strength. However, the addition of magne-sium significantly enhanced hygroscopy resistance of phosphate membrane. In addition, the phosphate binder added with the magnesium modifier has more rapid hardening reaction speed compared that without or with low magnesium binder. It can be concluded that the phosphate binder with the addition of magnesium modifier is favorably used in high humid and cold circumstance.
基金supported by National Natural Science Foundation of China(Nos.42072300 and 41702291).
文摘Sandstone is widely distributed in cold regions and the freeze-thaw deterioration of them has caused many geological engineering disasters.As an important and direct index of frost resistance,the strength loss of sandstones under freeze-thaw actions should be investigated to provide a guidance for the stability assessment of geological engineering.In this research,the UCS(Uniaxial compressive strength)loss of six typical sandstones with different water contents after 0,20,40 and 60 freeze-thaw cycles was measured in the laboratory.The experimental results indicated that the freeze-thaw damage was more serious in sandstones containing high water contents,and the critical saturations for causing a significant loss of UCS under freeze-thaw were 60%-80%for these sandstones.Below this critical saturation,the UCS loss of the sandstones was mainly caused by water weakening rather than freeze-thaw damage.Besides,a developed strength prediction model was proposed by combining the exponential decay function and multiple linear regression method.The initial porosity,elastic modulus and tensile strength of fresh sandstones were a good parameter combination to accurately determine the decay constant in this developed model.The main novelty of this model is that it can accurately and easily estimate the UCS loss of sandstones after any freeze-thaw cycle only using the initial parameters of fresh sandstones,but it does not need to perform freeze-thaw and mechanical strength experiments.This study not only provides an accurate prediction model of UCS under freeze-thaw,but also makes a contribution to better understanding the frost resistance mechanism of sandstones.
文摘In this experimental work, three groups of cement-slag mortars namely OPC, OPC-slag, and slag mortars were made. All were cured in both water and air under room temperature. Strength development was studied up to 90 days. The mortars were prepared using 0%, 50%, and 100% replacement with slag. The sensitivity for all groups was obtained against the curing regime with the highest being attributed to the slag mortars. The highest and lowest strengths at early ages were attributed to OPC and slag mortars when both were cured in water. The highest and lowest strengths were attributed to OPC-slag and slag mortars at later ages, respectively. The highest strengths for OPC-slag, OPC, and slag mortars were as 72.0, 64.0, and 21.5 MPa at 90 days when the specimens cured in water, respectively. Strength loss was observed for all groups at later ages when cured in air under room temperature. The maximum and minimum, of about 8.0% and 1.3%, occurred at 56 and 90 days for slag and OPC-slag mortars, respectively.
