Assessment of Aged Offshore Jacket Type Platforms Considering Environmental Loads and Degradation Parameters

Offshore steel structures are a common investment in oil and gas industries operating in shallow to medium depth seas.These structures have become increasingly popular since the mid-19th century,with a typical design life of 30-50 years.Despite their popularity,the structural integrity of existing offshore structures remains a controversial topic.Environmental loads and material degradation have been identified as significant factors that can compromise the structural integrity of offshore structures.To address this issue,this study aims to investigate the reserved strength capacity of a selected offshore structure located in the Malaysian Seas.The study will explore the effect of oceanographic data,variations in vertical load,and corrosion on the structure’s main members.To determine the impact of each variable on the reserved strength ratio(RSR)of the structure,several pushover analyses were conducted with different variables.Previous literature has shown little or no relationship between seawater wave height,gravity loads,and corrosion allowance on submerged steel members and the RSR of offshore structures.However,this study aims tofill this gap in knowledge by examining these variables’effects on the RSR of offshore structures.The study’sfindings indicate that even a slight increase in wave height can significantly impact the structure’s RSR due to the increase in lateral loading,potentially leading to severe damage to structural components and the foundation model.Additionally,gravity loads had an adverse effect on the RSR of the structure when more than double the vertical load was added.Corrosion allowance was also found to impact the RSR,particularly when assuming significant wall thickness corrosion in primary members.Overall,thefindings of this study have important implications for the design and maintenance of offshore structures.The results suggest that engineers and operators should pay close attention to the potential impacts of environmental loads,such as wave height and gravity loads,and material degradation,such as corrosion allowance,on the structural integrity of offshore structures.This information can be used to optimize the design and maintenance of offshore structures,leading to safer and more efficient operations.

Investigation of Working Bodies of the Device for Separation of Fibers Suitable for Spinning from Cotton Waste

It is known that fiber wastes (lint, down and seeds) produced at ginneries contain fibers that are suitable for spinning and can be used in industry, and their separation significantly increases the level of fiber production (1.9% - 2.5%). Based on these analyzes, the study aimed to create a new device that separates long fibers from lint and down. As a result, the amount of fiber output in the enterprise will increase and the enterprise will have significant economic benefits. In addition, the introduction of the device will prevent the addition of long fibers (longer than 16 mm) that can be used in the textile industry to the waste. This article focuses on the creation of a fiber separation device suitable for the treatment and spinning of fibrous waste produced in ginneries. The study theoretically examined the main working bodies of the fiber separation device from waste. Theoretical research is devoted to the study of the strength of the main working body of the fiber separation device−the separating saw drum and its shaft. In the study, the sawdust drum is a more stressed steel coating, and it was found that the strength reserve of this drum is [δТ] = 2.03 (where δТ = 0.8 - 2.5) was found to be. As a result of calculating the resistance of the saw drum shaft to stiffness and vibration, it was determined that the shafts are resistant to vibration under periodic loading and that the oscillation frequency along its axis through the critical rotation frequency is vcr=10.3 Gts.

Determination of Technological Parameters of Fiber Separation Device from Cotton Waste

This article examines the technological parameters of the device for the separation of fibers suitable for spinning by processing fibrous waste from the technological processes of ginneries. Technological processes in the cotton ginning industry include a complex of physical and mechanical advantages, the successful study of which is possible only with the use of modern achievements in science and technology. Therefore, it is advisable to conduct scientific research based on mathematical modeling. To justify the effective operation of the selected design of the cotton fiber separation device, it is necessary to select its optimal technological parameters. Improving the efficiency of the process of separation of spinning fibers from the composition of fibrous waste depends directly on technological parameters. The application of mathematical methods in the planning and conduct of research allows for determining the individual effects of the interaction of several factors that characterize the combined parameters of the optimization parameters, in contrast to traditional computational methods of research. As a result, it will be possible to obtain a mathematical model of the object understudy in a relatively small number of tests, which will simultaneously serve to obtain optimal solutions.