Polymyxin B is widely used antibiotic in the clinic for resistant Gram-negative infections. In addition, polymyxin B-immobilized hemoperfusion cartridge has been used for endotoxin removal therapy in patients with sep...Polymyxin B is widely used antibiotic in the clinic for resistant Gram-negative infections. In addition, polymyxin B-immobilized hemoperfusion cartridge has been used for endotoxin removal therapy in patients with septic shock. The aim of this study was to investigate the anti-fibrotic and anti-cellular hypertrophic effects of polymyxin B, and further to explore its possible mechanism. Polymyxin B (3, 10 μM) significantly inhibited stress fiber formation induced by angiotensin II (Ang II) in rat heart-derived H9c2 cells. Furthermore, polymyxin B (1 - 10 μM) showed a potent inhibitory effect on Ang II-induced cellular hypertrophy in H9c2 cells. Under the mechanism study, the inhibitory activities of polymyxin B against kinases involved in cellular hypertrophy such as AKT1, CAMK, GRK5, GSK3β, MLCK, PKC, PKD2, AMPK, ROCK2, p70S6K, SGK1were evaluated. Polymyxin B possesses a potent G protein related kinase 5 (GKR5) inhibitory activity with IC50 value of 1.1 μM, and has an ATP non-competitive inhibitory mode. Taken together, these results indicate that polymyxin B alleviates Ang II-induced stress fiber formation and cellular hypertrophy, and propose that one mechanism underlying these effects involves inhibition of the GRK5 pathway.展开更多
The equations for fiber suspensions in an evolving mixing layer were solved by the spectral method, and the trajectory and orientation of fibers were calculated based on the slender body theory. The calculated spatial...The equations for fiber suspensions in an evolving mixing layer were solved by the spectral method, and the trajectory and orientation of fibers were calculated based on the slender body theory. The calculated spatial and orientation distributions of fibers are consistent with the experimental ones that were performed in this paper. The relationship between the microstructure of fibers and additional stress was examined. The results show that the spatial and orientation distributions of fibers are heterogeneous because of the influence of coherent vortices in the flow, which leads to the heterogeneity of the additional stress. The degree of heterogeneity increases with the increasing of St number and fiber aspect ratio. The fibers in the flow make the momentum loss thickness of the mixing layer thicker and accelerate the vorticity dispersion.展开更多
The stress-resistance relationship of carbon fiber cement was studied.Attention has been paid to explore the improvement of the stress-resistance sensitivity under cycled stress restriction.The prismy carbon fiber cem...The stress-resistance relationship of carbon fiber cement was studied.Attention has been paid to explore the improvement of the stress-resistance sensitivity under cycled stress restriction.The prismy carbon fiber cement sensors were pre-fabricated.The factors such as contents of carbon fibers.silica fume,dispersant and the w/c were taken into account.The electrical resistance variations with the dynamic and static loads were simulated using a strain-controlled test machine.The test results show that there is an optimal fiber content,with which the compression-sensitivity achieves a high level.The addition of silica fume can improve the sensitivity.Under the optimal test conditions,the measured resistances can greatly correspond with the changes of the load.展开更多
Stress-induced birefringence and modal birefringence of single-mode specialty optical fibers with three stress regions are numerically analyzed by the vector finite element method. Stress distribution and stress-induc...Stress-induced birefringence and modal birefringence of single-mode specialty optical fibers with three stress regions are numerically analyzed by the vector finite element method. Stress distribution and stress-induced birefringence distribution of three kinds of optical fibers with different cross structures are presented and compared, and the influence on the stress- induced birefringence by temperature change are analyzed as well. The results show that the fibers with three-stress regions have a lower linear birefringence, which is very important for the fabrication of the circular polaxization-maintalning fiber with high performance drawn from the same fiber preform by using the spinning method.展开更多
Specially designed fibers are widely used in engineering practice because the specially-designed shape can help to improve the bonding strength of the fiber and the interface. Studied in this paper is the interfacial ...Specially designed fibers are widely used in engineering practice because the specially-designed shape can help to improve the bonding strength of the fiber and the interface. Studied in this paper is the interfacial shear stress transfer behavior on both sides of the specially designed fiber when it is being pulled out; in which automatic analysis of three-dimensional photoelasticity is employed and the finite element method is adopted. The results show that the stress transfer occurs mainly in the region near the fiber's embedded end where the stress reaches its critical point, leading to debonding of the interface. Before debonding, as the pullout loading increases, the peak value of shear stress transfers along the fiber from the embedded end to the interior of the matrix, and then stops at the hooked part of the fiber because of its impediment. When the interface begins to debond as the load increases, the shear stress can be transferred to the hooked part.展开更多
In this paper the elastic stress transfer from the fiber to the matrix is analysed for fiber-reinforced composites when the fiber is loaded axially.The dependence of the elastic stress transfer on the as- pect ratio o...In this paper the elastic stress transfer from the fiber to the matrix is analysed for fiber-reinforced composites when the fiber is loaded axially.The dependence of the elastic stress transfer on the as- pect ratio of the fiber,the volume fraction of the fiber,the fiber-to-matrix elastic modulus ratio and the Poisson's ratio of the fiber and the matrix has been shown in detail.展开更多
In this paper we propose an analyzing of the response of a stress optical fiber sensor of which we proposed several design. We show that an optical fiber sensor with these designs can covenanting allow the measuring t...In this paper we propose an analyzing of the response of a stress optical fiber sensor of which we proposed several design. We show that an optical fiber sensor with these designs can covenanting allow the measuring the force/stress applied to a mechanical structure or which it is linked, by optimizing the uses of appropriate materials for constituting the sensor support. The experiment that we introduce to validate our approach based in principles includes design with a support bearing a multimode optical fiber organized in such a way that the transmitted light is attenuated when the fiber-bending angle coming from stitching in holes of the support is modified by the effects of the force/stress applied to the optical fiber sensor realized in this way. The tests realized concern the most relevant parameters that define the performances of the stress sensor that we propose. We present the problems that we to solved for the optimization of the sensor for selecting the more efficient material for the optical fiber sensor support related to a relevant choice of optical fibers.展开更多
The development of the cotton fiber is very sensitive to temperature variation, and high temperature stress often causes reduced fiber yield and fiber quality. Short-term high temperature stress often occurs during co...The development of the cotton fiber is very sensitive to temperature variation, and high temperature stress often causes reduced fiber yield and fiber quality. Short-term high temperature stress often occurs during cotton production, but little is known about the specific timing and duration of stress that affects fiber development. To make this clear, pot experiments were carried in 2014 and 2015 in a climate chamber using cotton cultivars HY370WR(less sensitive variety) and Sumian 15(heat sensitive variety), which present different temperature sensitivities. Changes of the most important fiber quality indices(i.e., fiber length, fiber strength and marcironaire) and three very important fiber development components(i.e., cellulose, sucrose and callose) were analyzed to define the time window and critical duration to the high temperature stress at 34°C(max38°C/min30°C). When developing bolls were subjected to 5 days of high temperature stress at different days post-anthesis(DPA), the changes(Δ%) of fiber length, strength and micronire, as a function of imposed time followed square polynomial eq. as y=a+bx+cx^2, and the time around 15 DPA was the most sensitive period for fiber quality development in response to heat stress. When 15 DPA bolls were heat-stressed for different durations(2, 3, 4, 5, 6, 7 days), the changes(Δ%) of fiber length, strength and micronire, as a function of stress duration followed logistic equations y=A_1-A_2/1+(x/x_0)~p+A_2. Referred to that 5, 10 and 15% are usually used as criteria to decide whether techniques are effective or changes are significant in crop culture practice and reguard to the fiber quality indices change range, we suggested that 5% changes of the major fiber quality indices(fiber length, fiber strength and micronaire) and 10% changes of fiber development components(cellulose, sucrose and callose) could be taken as criteria to judge whether fiber development and fiber quality have been significantly affected by high temperature stress. The key time window for cotton fiber development in response to the high temperature stress was 13–19 DPA, and the critical duration was about 5 days.展开更多
Fasciclin-like arabinogalactan proteins(FLAs),a subclass of arabinogalactan proteins(AGPs),are usually involved in cell development in plants.To investigate the expression profiling as well
Running composite insulators are prone to failure due to their harsh surrounding work environment, which directly affects the safe operation of transmission lines. This paper puts forward the method of using fiber Bra...Running composite insulators are prone to failure due to their harsh surrounding work environment, which directly affects the safe operation of transmission lines. This paper puts forward the method of using fiber Bragg grating(FBG) as the monitors to parameters correlated with thermal and stress of the composite insulators in transmission lines at working status. Firstly, monitoring points are found out by the mechanical test on composite insulator samples. Secondly, based on the monitoring theory, this paper introduces the feasibility design frame of the composite insulator with FBG implanted in the rod and the online monitor system. At last, it describes applications of this monitor system in the field of transmission lines.展开更多
A landslide monitoring application is presented by using a high-resolution distributed fiber optic stress sensor. The sensor is used to monitor the intra-stress distribution and variations in landslide bodies, and can...A landslide monitoring application is presented by using a high-resolution distributed fiber optic stress sensor. The sensor is used to monitor the intra-stress distribution and variations in landslide bodies, and can be used for the early warning of the occurrence of the landslides. The principle of distributed fiber optic stress sensing and the intra-stress monitoring method for landslides are described in detail. By measuring the distributed polarization mode coupling in the polarization-maintaining fiber, the distributed fiber stress sensor with stress measuring range 0 to 15 MPa, spatial resolution 10 cm and measuring range 0.5 km, is designed. The warning system is also investigated experimentally in the field trial.展开更多
Aim: In this study, we explored the effects of dietary fiber on athletic performance. Methods: Twenty healthy college athletes (male/female, 1/1) consumed 6 grams of dietary fiber (Fiberpro, Taiyo Lab Inc., Tokyo) dai...Aim: In this study, we explored the effects of dietary fiber on athletic performance. Methods: Twenty healthy college athletes (male/female, 1/1) consumed 6 grams of dietary fiber (Fiberpro, Taiyo Lab Inc., Tokyo) daily for four weeks and were evaluated for their athletic performance, salivary biomarkers of stress (α-amylase activity pre-post exercise, cortisol, melatonin, and secretory immunoglobulin A (SIgA) levels), and mood/affect using the Profile of Mood State 2nd edition (POMS 2®). Measurements were taken at baseline (before supplementation), at Week 4 (after 4 weeks of supplementation), and at Week 8 (4 weeks after the completion of supplementation). Results: Results showed that athletic performance and exercise-induced elevation in salivary α-amylase activity improved with Fiberpro supplementation in both men and women. Further, the Anger-Hostility scale in POMS was significantly elevated in men;in women, an increase in Vigor-Activity score, a single index of positive mood, was noted. These findings suggest that Fiberpro may induce differential affective responses in men and women. Meanwhile, Fiberpro did not affect the normal diurnal changes in salivary melatonin and SIgA levels, but it appeared to augment the normal circadian patterns of cortisol, an effect that persisted for a month without Fiberpro intake. We propose that boosting fiber intake in young, healthy athletes may improve gut microbiota and confer resilience against stress.展开更多
The modified shear lag model proposed recently was applied to calculate thermal residual stresses and subsequent stress distributions under tensile and compressive loadings. The expressions for the elastic moduli and ...The modified shear lag model proposed recently was applied to calculate thermal residual stresses and subsequent stress distributions under tensile and compressive loadings. The expressions for the elastic moduli and the yield strengths under tensile and compressive loadings were derived which take account of thermal residual stresses. The asymmetries in the elastic modulus and the yield strength were interpreted using the derived expressions and the obtained results of the stress calculations. The model predictions have exhibited good agreements with the experimental results and also with the other theoretical predictions展开更多
Residual thermal stresses (RTS) of SCS-6 SiC/Ti-24Al-11Nb composite were analyzed by using finite element method (FEM). Three models of fiber array in the composite and the effect of fiber distance on the RTS were dis...Residual thermal stresses (RTS) of SCS-6 SiC/Ti-24Al-11Nb composite were analyzed by using finite element method (FEM). Three models of fiber array in the composite and the effect of fiber distance on the RTS were discussed. In all the three models compressive stress was found in the radial direction and tensile stress in the tangential direction. It is pointed out that, in real composite system, hexagonal fiber geometry is superior because the distribution and the magnitude of the residual stress are similar to those in single fiber model. In square fiber geometry, it is easier to make the matrix crack due to the larger residual tangential stress. RTS becomes very large and changes violently when the fiber distance is less than 15 μm or so, therefore too high fiber volume is apt to result in matrix crack.展开更多
By employing the elastic and elastic plastic finite element method(FEM), the effects of matrix feature on the stress transfer mechanisms of short fiber composites are studied. In the calculation, the variations in ma...By employing the elastic and elastic plastic finite element method(FEM), the effects of matrix feature on the stress transfer mechanisms of short fiber composites are studied. In the calculation, the variations in matrix modulus, yield strength and hardening modulus are considered. It is concluded that large deformation of matrix is harmful to the improvement of the mechanical performances of the composites.展开更多
Through the experiments of 7 T-section composite beams, steel fiber reinforced self-stressing concrete (SFRSC) as the composite beam in the composite layer was studied under the hogging bending. The tests simulated ...Through the experiments of 7 T-section composite beams, steel fiber reinforced self-stressing concrete (SFRSC) as the composite beam in the composite layer was studied under the hogging bending. The tests simulated composite layer tensile strain under the hogging bending of inverted loading composite beams, giving the relationship under the different fatigue stress ratios between fatigue cycles and steel bar’s stress range, crack width, stiffness loss and damage, etc., in composite layer. This article established fatigue life equation, and analyzed SFRSC reinforced mechanism to crack width and stiffness loss. The results show that SFRSC as the composite beam concrete has excellent properties of crack resistance and tensile, can reinforce the fatigue crack width and stiffness loss of composite beams, and improve the durability and in normal use of composite beams in the hogging bending zone.展开更多
This work aims to describe the behavior of the interface using the method of load transfer between fiber and matrix in a composite material. Our contribution is to track the Evolution of the thermomechanical behavior ...This work aims to describe the behavior of the interface using the method of load transfer between fiber and matrix in a composite material. Our contribution is to track the Evolution of the thermomechanical behavior by establishing a new mathematical model that describes the variation of shear stress along the interface. This model has been implemented in code in C++. The results revealed that the shear of the interface increases with temperature. This increase is partly due to the difference in expansion coefficient between fiber and matrix. The composite studied is T300/914;Carbon-Epoxy.展开更多
文摘Polymyxin B is widely used antibiotic in the clinic for resistant Gram-negative infections. In addition, polymyxin B-immobilized hemoperfusion cartridge has been used for endotoxin removal therapy in patients with septic shock. The aim of this study was to investigate the anti-fibrotic and anti-cellular hypertrophic effects of polymyxin B, and further to explore its possible mechanism. Polymyxin B (3, 10 μM) significantly inhibited stress fiber formation induced by angiotensin II (Ang II) in rat heart-derived H9c2 cells. Furthermore, polymyxin B (1 - 10 μM) showed a potent inhibitory effect on Ang II-induced cellular hypertrophy in H9c2 cells. Under the mechanism study, the inhibitory activities of polymyxin B against kinases involved in cellular hypertrophy such as AKT1, CAMK, GRK5, GSK3β, MLCK, PKC, PKD2, AMPK, ROCK2, p70S6K, SGK1were evaluated. Polymyxin B possesses a potent G protein related kinase 5 (GKR5) inhibitory activity with IC50 value of 1.1 μM, and has an ATP non-competitive inhibitory mode. Taken together, these results indicate that polymyxin B alleviates Ang II-induced stress fiber formation and cellular hypertrophy, and propose that one mechanism underlying these effects involves inhibition of the GRK5 pathway.
基金The project supported by the Doctoral Program of Higher Education in China(20030335001)
文摘The equations for fiber suspensions in an evolving mixing layer were solved by the spectral method, and the trajectory and orientation of fibers were calculated based on the slender body theory. The calculated spatial and orientation distributions of fibers are consistent with the experimental ones that were performed in this paper. The relationship between the microstructure of fibers and additional stress was examined. The results show that the spatial and orientation distributions of fibers are heterogeneous because of the influence of coherent vortices in the flow, which leads to the heterogeneity of the additional stress. The degree of heterogeneity increases with the increasing of St number and fiber aspect ratio. The fibers in the flow make the momentum loss thickness of the mixing layer thicker and accelerate the vorticity dispersion.
文摘The stress-resistance relationship of carbon fiber cement was studied.Attention has been paid to explore the improvement of the stress-resistance sensitivity under cycled stress restriction.The prismy carbon fiber cement sensors were pre-fabricated.The factors such as contents of carbon fibers.silica fume,dispersant and the w/c were taken into account.The electrical resistance variations with the dynamic and static loads were simulated using a strain-controlled test machine.The test results show that there is an optimal fiber content,with which the compression-sensitivity achieves a high level.The addition of silica fume can improve the sensitivity.Under the optimal test conditions,the measured resistances can greatly correspond with the changes of the load.
基金Project supported by the Shanghai Leading Academic Discipline Project (Grant No.S30108)the Science and Technology Commission of Shanghai Municipality (Grant No.08DZ2231100)
文摘Stress-induced birefringence and modal birefringence of single-mode specialty optical fibers with three stress regions are numerically analyzed by the vector finite element method. Stress distribution and stress-induced birefringence distribution of three kinds of optical fibers with different cross structures are presented and compared, and the influence on the stress- induced birefringence by temperature change are analyzed as well. The results show that the fibers with three-stress regions have a lower linear birefringence, which is very important for the fabrication of the circular polaxization-maintalning fiber with high performance drawn from the same fiber preform by using the spinning method.
基金supported by the National Natural Science Foundation of China(10662005)
文摘Specially designed fibers are widely used in engineering practice because the specially-designed shape can help to improve the bonding strength of the fiber and the interface. Studied in this paper is the interfacial shear stress transfer behavior on both sides of the specially designed fiber when it is being pulled out; in which automatic analysis of three-dimensional photoelasticity is employed and the finite element method is adopted. The results show that the stress transfer occurs mainly in the region near the fiber's embedded end where the stress reaches its critical point, leading to debonding of the interface. Before debonding, as the pullout loading increases, the peak value of shear stress transfers along the fiber from the embedded end to the interior of the matrix, and then stops at the hooked part of the fiber because of its impediment. When the interface begins to debond as the load increases, the shear stress can be transferred to the hooked part.
文摘In this paper the elastic stress transfer from the fiber to the matrix is analysed for fiber-reinforced composites when the fiber is loaded axially.The dependence of the elastic stress transfer on the as- pect ratio of the fiber,the volume fraction of the fiber,the fiber-to-matrix elastic modulus ratio and the Poisson's ratio of the fiber and the matrix has been shown in detail.
文摘In this paper we propose an analyzing of the response of a stress optical fiber sensor of which we proposed several design. We show that an optical fiber sensor with these designs can covenanting allow the measuring the force/stress applied to a mechanical structure or which it is linked, by optimizing the uses of appropriate materials for constituting the sensor support. The experiment that we introduce to validate our approach based in principles includes design with a support bearing a multimode optical fiber organized in such a way that the transmitted light is attenuated when the fiber-bending angle coming from stitching in holes of the support is modified by the effects of the force/stress applied to the optical fiber sensor realized in this way. The tests realized concern the most relevant parameters that define the performances of the stress sensor that we propose. We present the problems that we to solved for the optimization of the sensor for selecting the more efficient material for the optical fiber sensor support related to a relevant choice of optical fibers.
基金funded by the National Natural Science Foundation of China(31271654,31471444)the Natural Science Foundation of Jiangsu Province,China(BK20131318)
文摘The development of the cotton fiber is very sensitive to temperature variation, and high temperature stress often causes reduced fiber yield and fiber quality. Short-term high temperature stress often occurs during cotton production, but little is known about the specific timing and duration of stress that affects fiber development. To make this clear, pot experiments were carried in 2014 and 2015 in a climate chamber using cotton cultivars HY370WR(less sensitive variety) and Sumian 15(heat sensitive variety), which present different temperature sensitivities. Changes of the most important fiber quality indices(i.e., fiber length, fiber strength and marcironaire) and three very important fiber development components(i.e., cellulose, sucrose and callose) were analyzed to define the time window and critical duration to the high temperature stress at 34°C(max38°C/min30°C). When developing bolls were subjected to 5 days of high temperature stress at different days post-anthesis(DPA), the changes(Δ%) of fiber length, strength and micronire, as a function of imposed time followed square polynomial eq. as y=a+bx+cx^2, and the time around 15 DPA was the most sensitive period for fiber quality development in response to heat stress. When 15 DPA bolls were heat-stressed for different durations(2, 3, 4, 5, 6, 7 days), the changes(Δ%) of fiber length, strength and micronire, as a function of stress duration followed logistic equations y=A_1-A_2/1+(x/x_0)~p+A_2. Referred to that 5, 10 and 15% are usually used as criteria to decide whether techniques are effective or changes are significant in crop culture practice and reguard to the fiber quality indices change range, we suggested that 5% changes of the major fiber quality indices(fiber length, fiber strength and micronaire) and 10% changes of fiber development components(cellulose, sucrose and callose) could be taken as criteria to judge whether fiber development and fiber quality have been significantly affected by high temperature stress. The key time window for cotton fiber development in response to the high temperature stress was 13–19 DPA, and the critical duration was about 5 days.
文摘Fasciclin-like arabinogalactan proteins(FLAs),a subclass of arabinogalactan proteins(AGPs),are usually involved in cell development in plants.To investigate the expression profiling as well
基金supported by National High-tech Research and Development Program of China (863 Program) (2013AA030701)Science and Technology Project of the State Grid Xinjiang Electric Power Corporation (5230DK15009L)
文摘Running composite insulators are prone to failure due to their harsh surrounding work environment, which directly affects the safe operation of transmission lines. This paper puts forward the method of using fiber Bragg grating(FBG) as the monitors to parameters correlated with thermal and stress of the composite insulators in transmission lines at working status. Firstly, monitoring points are found out by the mechanical test on composite insulator samples. Secondly, based on the monitoring theory, this paper introduces the feasibility design frame of the composite insulator with FBG implanted in the rod and the online monitor system. At last, it describes applications of this monitor system in the field of transmission lines.
基金supported by the National Natural Science Foundation of China under Grant No. 60377021partially supported by Program for New Century Excellent Talents in University under Grant. No. NCET-07-0152Sichuan Scientific Funds for Young Researchers under Grant No. 08ZQ026-012.
文摘A landslide monitoring application is presented by using a high-resolution distributed fiber optic stress sensor. The sensor is used to monitor the intra-stress distribution and variations in landslide bodies, and can be used for the early warning of the occurrence of the landslides. The principle of distributed fiber optic stress sensing and the intra-stress monitoring method for landslides are described in detail. By measuring the distributed polarization mode coupling in the polarization-maintaining fiber, the distributed fiber stress sensor with stress measuring range 0 to 15 MPa, spatial resolution 10 cm and measuring range 0.5 km, is designed. The warning system is also investigated experimentally in the field trial.
文摘Aim: In this study, we explored the effects of dietary fiber on athletic performance. Methods: Twenty healthy college athletes (male/female, 1/1) consumed 6 grams of dietary fiber (Fiberpro, Taiyo Lab Inc., Tokyo) daily for four weeks and were evaluated for their athletic performance, salivary biomarkers of stress (α-amylase activity pre-post exercise, cortisol, melatonin, and secretory immunoglobulin A (SIgA) levels), and mood/affect using the Profile of Mood State 2nd edition (POMS 2®). Measurements were taken at baseline (before supplementation), at Week 4 (after 4 weeks of supplementation), and at Week 8 (4 weeks after the completion of supplementation). Results: Results showed that athletic performance and exercise-induced elevation in salivary α-amylase activity improved with Fiberpro supplementation in both men and women. Further, the Anger-Hostility scale in POMS was significantly elevated in men;in women, an increase in Vigor-Activity score, a single index of positive mood, was noted. These findings suggest that Fiberpro may induce differential affective responses in men and women. Meanwhile, Fiberpro did not affect the normal diurnal changes in salivary melatonin and SIgA levels, but it appeared to augment the normal circadian patterns of cortisol, an effect that persisted for a month without Fiberpro intake. We propose that boosting fiber intake in young, healthy athletes may improve gut microbiota and confer resilience against stress.
文摘The modified shear lag model proposed recently was applied to calculate thermal residual stresses and subsequent stress distributions under tensile and compressive loadings. The expressions for the elastic moduli and the yield strengths under tensile and compressive loadings were derived which take account of thermal residual stresses. The asymmetries in the elastic modulus and the yield strength were interpreted using the derived expressions and the obtained results of the stress calculations. The model predictions have exhibited good agreements with the experimental results and also with the other theoretical predictions
文摘Residual thermal stresses (RTS) of SCS-6 SiC/Ti-24Al-11Nb composite were analyzed by using finite element method (FEM). Three models of fiber array in the composite and the effect of fiber distance on the RTS were discussed. In all the three models compressive stress was found in the radial direction and tensile stress in the tangential direction. It is pointed out that, in real composite system, hexagonal fiber geometry is superior because the distribution and the magnitude of the residual stress are similar to those in single fiber model. In square fiber geometry, it is easier to make the matrix crack due to the larger residual tangential stress. RTS becomes very large and changes violently when the fiber distance is less than 15 μm or so, therefore too high fiber volume is apt to result in matrix crack.
文摘By employing the elastic and elastic plastic finite element method(FEM), the effects of matrix feature on the stress transfer mechanisms of short fiber composites are studied. In the calculation, the variations in matrix modulus, yield strength and hardening modulus are considered. It is concluded that large deformation of matrix is harmful to the improvement of the mechanical performances of the composites.
基金Project supported by the Science and Technology of Department of Communications of Liaoning Province (Grant No.200514)the Science and Technology of Department of Education of Liaoning Province (Grant No.L2010378)
文摘Through the experiments of 7 T-section composite beams, steel fiber reinforced self-stressing concrete (SFRSC) as the composite beam in the composite layer was studied under the hogging bending. The tests simulated composite layer tensile strain under the hogging bending of inverted loading composite beams, giving the relationship under the different fatigue stress ratios between fatigue cycles and steel bar’s stress range, crack width, stiffness loss and damage, etc., in composite layer. This article established fatigue life equation, and analyzed SFRSC reinforced mechanism to crack width and stiffness loss. The results show that SFRSC as the composite beam concrete has excellent properties of crack resistance and tensile, can reinforce the fatigue crack width and stiffness loss of composite beams, and improve the durability and in normal use of composite beams in the hogging bending zone.
文摘This work aims to describe the behavior of the interface using the method of load transfer between fiber and matrix in a composite material. Our contribution is to track the Evolution of the thermomechanical behavior by establishing a new mathematical model that describes the variation of shear stress along the interface. This model has been implemented in code in C++. The results revealed that the shear of the interface increases with temperature. This increase is partly due to the difference in expansion coefficient between fiber and matrix. The composite studied is T300/914;Carbon-Epoxy.