Focal mechanism solutions and centroid depths of 312 M≥4 aftershocks from the 2008 Wenchuan earthquake sequence have been derived by CAP （Cut and Paste） method from broadband waveform data with relatively high sign...Focal mechanism solutions and centroid depths of 312 M≥4 aftershocks from the 2008 Wenchuan earthquake sequence have been derived by CAP （Cut and Paste） method from broadband waveform data with relatively high signal-to-noise ratio （SNR）. Following this, we have analyzed the distribution of focal depths and the stress tensors, as well as the types of focal mechanisms. The major results are： （1） different cross-sections show that the depth ranges of the aftershocks at the southern and northern ends of the aftershock area along the Longmenshan fault zone are wider than those on the central segment, where rare M≥4 aftershocks occurred at depths shallower than 10 kin. The main faults trend to the NW on the southern and central segments, and for the northern segment, no dominant trend direction has been determined; （2） stress tensor distribution demonstrates that the majority of the aftershock areas on the cross-section along the major axis are mainly under compressive stress perpendicular to the profile; however, for the areas near Lixian, Beichuan, Qingchuan and the shallow parts of its northern segment, large principal stress components are parallel to the major axis profile direction. On the cross-sections perpendicular to the major axis, the three areas above can be divided into two parts： one with dominantly compressional stress near the major faults of the Longmenshan fault zone on the SE side, and the other with NE-direction push along the fault zone on the NW side; （3） the stress tensor distribution in map view is very similar to those on the vertical cross-sections. In map view, the orientation of the principal compressional stress axis $1 on the central segment of the aftershock area presents an SE-trending arc shape; （4） the stress tensor slices at different depths show that the orientation of S1 axis mainly changes on the central segment and at the northern end, indicating that the two segments have different seismogenic structures at different depths; （5） with the exception of the northern end of the aftershock region, the orientation of the $1 axis changes little during the early and late stages, illustrating the seismogenic structures are relatively stable; （6） preliminary analyses for the seismogenic structures at the northern end indicated that deeper strike-slip quakes occurred on the ENE-striking branch at first, and then the NNE-striking branch faults at the northern end were activated and generated a series of relatively shallow strike-slip earthquakes due to subsequent stress-triggering; （7） the aftershock triggering mechanism that occurred near Lixian is different between the shallow and deep depths, and between the early and late stages, indicating that the main faults and the branch faults responsible for aftershocks are at different depths. Consequently, the relaxation effect of the main shock particularIy impacts the branch faults.展开更多
Based on the spatial orientation and slip direction of the fault plane solutions, we present the expression of corresponding mechanical axis tensor in geographic coordinate system, and then put forward a method for ca...Based on the spatial orientation and slip direction of the fault plane solutions, we present the expression of corresponding mechanical axis tensor in geographic coordinate system, and then put forward a method for calculating average mechanical axis tensor and its eigenvalues, which involves solving the corresponding eigenequation. The method for deducing mean stress field from T, B, and P axes parameters of a number of focal mechanism solutions has been verified by inverting data of mean stress fields in Fuyun region and in Tangshan region with fitting method of slip direction, and both results are consistent. To study regional average stress field, we need to choose a population of focal mechanism solutions of earthquakes in the massifs where there are significant tectonic structures. According to the focal mechanism solutions of 256 moderate-strong earthquakes occurred in 13 seismic zones of Sichuan-Yunnan region, the quantitative analysis results of stress tensor in each seismic zone have been given. The algorithm of such method is simple and convenient, which makes the method for analyzing tectonic stress field with large amount of focal mechanism solution data become quantified.展开更多
Two earthquakes of Ms=6.0 and Ms=6. 1 consecutively occurred on December 31, 1994 and January 10, 1995 in Beibuwan region, China. By using the generalized reflection-transmission coefficient matrix and the discrete sl...Two earthquakes of Ms=6.0 and Ms=6. 1 consecutively occurred on December 31, 1994 and January 10, 1995 in Beibuwan region, China. By using the generalized reflection-transmission coefficient matrix and the discrete slowness integration method in the calculation of Green's functions, we obtained the focal mechanisms of these earthquakes using long-period waveforms of regional body waves recorded by the China Digital Seismograph Network (CDSN) by means of moment tensor inversion method in frequency domain. The results inverted indicate that the focal mechanisms of these two earthquakes were similar to each other. Their principal compressional stresses are in NW-SE direction and principal tensional stresses are in NE-SW direction. It turns out that the occurrence of the two earthquakes was controlled by the same tectonic environment related to the collision of the Philippine Plate and the Eurasian Plates. On the other hand, the results imply that the stress field in the seismogenic region has a significant change after the Ms=6.0 earthquake. It may be proposed that the occurrence of the Ms=6. 1 earthquake could be related to the stress field adjustment caused by the Ms=6.0 earthquake.展开更多
In the theory of general relativity, the finding of the Einstein Field Equation happens in a complex mathematical operation, a process we don’t need any more. Through a new theory in vector analysis, we’ll see that ...In the theory of general relativity, the finding of the Einstein Field Equation happens in a complex mathematical operation, a process we don’t need any more. Through a new theory in vector analysis, we’ll see that we can calculate the components of the Ricci tensor, Ricci scalar, and Einstein Field Equation directly in an easy way without the need to use general relativity theory hypotheses, principles, and symbols. Formulating the general relativity theory through another theory will make it easier to understand this relativity theory and will help combining it with electromagnetic theory and quantum mechanics easily.展开更多
Using the moment tensor inversion method, we calculate the focal mechanisms of the aftershock sequence of the Ms=6.1 Lulong earthquake occurred on October 19, 1982 in Hebei Province. We found that the pressure axis in...Using the moment tensor inversion method, we calculate the focal mechanisms of the aftershock sequence of the Ms=6.1 Lulong earthquake occurred on October 19, 1982 in Hebei Province. We found that the pressure axis in Lulong basin is nearly in the east-west direction with an azimuth of N74°E. However, in the north of the basin the stress axis changes to N43°E; and in some places near the center of the basin it changes to the northwest that is almost perpendicular to the P axis obtained by us from those events around the basin. This feature illuminates that in Lulong earthquake sequence, the stress direction is different in different parts of crustal structure, which shows that the tectonic movement in Lulong region is complex. This is because that Lulong is located in the eastern part of Chinese mainland and is subject to the compression of Japanese Sea Basin driven by the Pacific Plate. On the other hand, nipped by the Yanshan and North China blocks, Lulong is obviously restricted by the block boundaries.展开更多
基金supported by the projects from Ministry of National Science and Technology of China(Grant No. 2012BAK19B01-01)National Basic Research Program of China (Grant No. 2008CB425701)
文摘Focal mechanism solutions and centroid depths of 312 M≥4 aftershocks from the 2008 Wenchuan earthquake sequence have been derived by CAP （Cut and Paste） method from broadband waveform data with relatively high signal-to-noise ratio （SNR）. Following this, we have analyzed the distribution of focal depths and the stress tensors, as well as the types of focal mechanisms. The major results are： （1） different cross-sections show that the depth ranges of the aftershocks at the southern and northern ends of the aftershock area along the Longmenshan fault zone are wider than those on the central segment, where rare M≥4 aftershocks occurred at depths shallower than 10 kin. The main faults trend to the NW on the southern and central segments, and for the northern segment, no dominant trend direction has been determined; （2） stress tensor distribution demonstrates that the majority of the aftershock areas on the cross-section along the major axis are mainly under compressive stress perpendicular to the profile; however, for the areas near Lixian, Beichuan, Qingchuan and the shallow parts of its northern segment, large principal stress components are parallel to the major axis profile direction. On the cross-sections perpendicular to the major axis, the three areas above can be divided into two parts： one with dominantly compressional stress near the major faults of the Longmenshan fault zone on the SE side, and the other with NE-direction push along the fault zone on the NW side; （3） the stress tensor distribution in map view is very similar to those on the vertical cross-sections. In map view, the orientation of the principal compressional stress axis $1 on the central segment of the aftershock area presents an SE-trending arc shape; （4） the stress tensor slices at different depths show that the orientation of S1 axis mainly changes on the central segment and at the northern end, indicating that the two segments have different seismogenic structures at different depths; （5） with the exception of the northern end of the aftershock region, the orientation of the $1 axis changes little during the early and late stages, illustrating the seismogenic structures are relatively stable; （6） preliminary analyses for the seismogenic structures at the northern end indicated that deeper strike-slip quakes occurred on the ENE-striking branch at first, and then the NNE-striking branch faults at the northern end were activated and generated a series of relatively shallow strike-slip earthquakes due to subsequent stress-triggering; （7） the aftershock triggering mechanism that occurred near Lixian is different between the shallow and deep depths, and between the early and late stages, indicating that the main faults and the branch faults responsible for aftershocks are at different depths. Consequently, the relaxation effect of the main shock particularIy impacts the branch faults.
基金State Key Basic Research Development Program (2004CB418404) and the Joint Seismological Science Foundation of China (105004).
文摘Based on the spatial orientation and slip direction of the fault plane solutions, we present the expression of corresponding mechanical axis tensor in geographic coordinate system, and then put forward a method for calculating average mechanical axis tensor and its eigenvalues, which involves solving the corresponding eigenequation. The method for deducing mean stress field from T, B, and P axes parameters of a number of focal mechanism solutions has been verified by inverting data of mean stress fields in Fuyun region and in Tangshan region with fitting method of slip direction, and both results are consistent. To study regional average stress field, we need to choose a population of focal mechanism solutions of earthquakes in the massifs where there are significant tectonic structures. According to the focal mechanism solutions of 256 moderate-strong earthquakes occurred in 13 seismic zones of Sichuan-Yunnan region, the quantitative analysis results of stress tensor in each seismic zone have been given. The algorithm of such method is simple and convenient, which makes the method for analyzing tectonic stress field with large amount of focal mechanism solution data become quantified.
文摘Two earthquakes of Ms=6.0 and Ms=6. 1 consecutively occurred on December 31, 1994 and January 10, 1995 in Beibuwan region, China. By using the generalized reflection-transmission coefficient matrix and the discrete slowness integration method in the calculation of Green's functions, we obtained the focal mechanisms of these earthquakes using long-period waveforms of regional body waves recorded by the China Digital Seismograph Network (CDSN) by means of moment tensor inversion method in frequency domain. The results inverted indicate that the focal mechanisms of these two earthquakes were similar to each other. Their principal compressional stresses are in NW-SE direction and principal tensional stresses are in NE-SW direction. It turns out that the occurrence of the two earthquakes was controlled by the same tectonic environment related to the collision of the Philippine Plate and the Eurasian Plates. On the other hand, the results imply that the stress field in the seismogenic region has a significant change after the Ms=6.0 earthquake. It may be proposed that the occurrence of the Ms=6. 1 earthquake could be related to the stress field adjustment caused by the Ms=6.0 earthquake.
文摘In the theory of general relativity, the finding of the Einstein Field Equation happens in a complex mathematical operation, a process we don’t need any more. Through a new theory in vector analysis, we’ll see that we can calculate the components of the Ricci tensor, Ricci scalar, and Einstein Field Equation directly in an easy way without the need to use general relativity theory hypotheses, principles, and symbols. Formulating the general relativity theory through another theory will make it easier to understand this relativity theory and will help combining it with electromagnetic theory and quantum mechanics easily.
基金National Natural Science Foundation of China(40234038)
文摘Using the moment tensor inversion method, we calculate the focal mechanisms of the aftershock sequence of the Ms=6.1 Lulong earthquake occurred on October 19, 1982 in Hebei Province. We found that the pressure axis in Lulong basin is nearly in the east-west direction with an azimuth of N74°E. However, in the north of the basin the stress axis changes to N43°E; and in some places near the center of the basin it changes to the northwest that is almost perpendicular to the P axis obtained by us from those events around the basin. This feature illuminates that in Lulong earthquake sequence, the stress direction is different in different parts of crustal structure, which shows that the tectonic movement in Lulong region is complex. This is because that Lulong is located in the eastern part of Chinese mainland and is subject to the compression of Japanese Sea Basin driven by the Pacific Plate. On the other hand, nipped by the Yanshan and North China blocks, Lulong is obviously restricted by the block boundaries.
