Based on simplified axisymmetrical forming model, a elasto-plastic FEM simulation system of multi-pass conventional spinning is developed. Taking the typical draw-spinning as the study object, and establishing reasona...Based on simplified axisymmetrical forming model, a elasto-plastic FEM simulation system of multi-pass conventional spinning is developed. Taking the typical draw-spinning as the study object, and establishing reasonable mechanics model, research on the first pass of spinning process is carried out with FEM system developed. The distributions of the stress and strain are obtained by three types of roller-trace curves: straight line, involute curves and quadratic curves. The results are as follows: (1) The values of equivalent stress and strain are the lowest under involute curve compared to other two curves, and they change relatively small and decrease with the increase of radius. The values of equivalent stress and strain is the highest under quadratic curves, and increase with the increase of radius. (2) The value of radial stress is smallest under involute curve, and is the largest under straight line. Value of radial stress is often used as the criterion of cracking limit, so its distribution laws can provide references for studying the condition of cracking in multi-pass conventional spinning under different roller-trace. (3) Tangential stress is compressive stress. Absolute value of tangential stress is the smallest under involute curve, and values of tangential stress are close between other two curves. The distribution laws of tangential stress can serve as a significant guide to research the critical condition of wrinkling in multi-pass conventional spinning under different roller-trace. (4) The reduction of thickness is the smallest under involute curve. The distribution of the thickness strain is very unequal under quadratic curves. The results obtained can provide references for selecting reasonable roller-trace in multi-pass conventional spinning.展开更多
For TA15 titanium alloy, slip is the dominant plastic deformation mechanism because of relatively high Al content. In order to reveal the grain-scale stress field and geometrically necessary dislocation（GND） density...For TA15 titanium alloy, slip is the dominant plastic deformation mechanism because of relatively high Al content. In order to reveal the grain-scale stress field and geometrically necessary dislocation（GND） density distribution around the slip traces and phase boundaries where the slip lines are blocked due to Burgers orientation relationship（OR） missing. We experimentally investigated tensile deformation on TA15 titanium alloy up to 2.0% strain at room temperature. The slip traces were observed and identified using high resolution scanning electron microscopy（SEM） and electron backscatter diffraction（EBSD） measurements. The grain-scale stress fields around the slip traces and phase boundaries were calculated by the cross-correlationbased method. Based on strain gradient theories, the density of GND was calculated and analyzed. The results indicate that the grain-scale stress is significantly concentrated at phase/grain boundaries and slip traces. Although there is an obvious GND accumulation in the vicinity of phase and subgrain boundaries, no GND density accumulation appears near the slip traces.展开更多
针对焊接锚垫板齿板锚固区配筋,提出了一种锚固区新型拉压杆模型。首先对齿板锚固区6种典型效应、主应力迹线以及力流平衡关系进行分析并建立新型拉压杆模型,其次通过美国国家公路与运输官员协会(American Association of State Highway...针对焊接锚垫板齿板锚固区配筋,提出了一种锚固区新型拉压杆模型。首先对齿板锚固区6种典型效应、主应力迹线以及力流平衡关系进行分析并建立新型拉压杆模型,其次通过美国国家公路与运输官员协会(American Association of State Highway and Transportation Officials,AASHTO)Load-and-resistance Factor Design Bridge Design Specifications、Building Code Requirements for Structural Concrete and Commentary(ACI 318-19)、《公路钢筋混凝土及预应力混凝土桥涵设计规范》(JTG 3362—2018)和欧洲设计建议Practical Design of Structural Concrete进行拉压杆模型参数定量化设计,根据拉压杆几何关系推导出焊接锚垫板齿板锚固区劈裂力计算式,利用有限元分析,拟合出焊接锚垫板下齿板锚固区劈裂力合力重心计算式。最后通过算例分析,按本文建议的拉压杆方法进行焊接锚垫板齿板锚固区结构配筋设计,能较好地控制锚下典型效应问题,相比《公路钢筋混凝土及预应力混凝土桥涵设计规范》(JTG 3362—2018)给出的设计方法,拉压杆模型法能较好地反映结构传力机制且具备可行性和可应用性,可为焊接锚垫板齿板锚固区配筋设计提供参考。展开更多
In this paper, the author reported the effect of maifanite on the learning and memory of rats suffering Cd poisoning by step-down and step-through test, analyzed the content of MDA, MT, SOD, and GSH-Px in the hippocam...In this paper, the author reported the effect of maifanite on the learning and memory of rats suffering Cd poisoning by step-down and step-through test, analyzed the content of MDA, MT, SOD, and GSH-Px in the hippocampus of rats respectively, and assayed the content of Fe, Cu, Zn, Mn, Se, and Cd in the hippocampus of rats. In the step-down test, it is found that maifanite can reduce the number of electric shock, prolong step-down latency, and cut down error times when rats are exposed to Cd 24 h. In the step-through test, maifanite can obviously prolong the latency of entering the dark cabin of rats suffering Cd poisoning. The exogenous Cd can lead to the decrease of SOD and GSH-Px activity and the increase of MDA and MT content. The alternation of maifanite and Cd by the gavage can significantly increase the SOD and GSH-Px activity as well as MT content, while lessening the MDA content. The accumulation of exogenous Cd in hippocampus causes the increase of Zn, Fe, Mn, and Cd content, and the decrease of Cu and Se content. The intake of maifanite can regulate the imbalance of metals content and make its content near to the of level control group. The research shows that maifanite can improve the ability of learning and memory of rats suffering Cd poisoning, increase MT formation and lower hyperoxidative damage. Maifanite has the function of balancing the content of trace elements in rats suffering Cd poisoning, and meanwhile can alleviate the toxicity of Cd effectively.展开更多
文摘Based on simplified axisymmetrical forming model, a elasto-plastic FEM simulation system of multi-pass conventional spinning is developed. Taking the typical draw-spinning as the study object, and establishing reasonable mechanics model, research on the first pass of spinning process is carried out with FEM system developed. The distributions of the stress and strain are obtained by three types of roller-trace curves: straight line, involute curves and quadratic curves. The results are as follows: (1) The values of equivalent stress and strain are the lowest under involute curve compared to other two curves, and they change relatively small and decrease with the increase of radius. The values of equivalent stress and strain is the highest under quadratic curves, and increase with the increase of radius. (2) The value of radial stress is smallest under involute curve, and is the largest under straight line. Value of radial stress is often used as the criterion of cracking limit, so its distribution laws can provide references for studying the condition of cracking in multi-pass conventional spinning under different roller-trace. (3) Tangential stress is compressive stress. Absolute value of tangential stress is the smallest under involute curve, and values of tangential stress are close between other two curves. The distribution laws of tangential stress can serve as a significant guide to research the critical condition of wrinkling in multi-pass conventional spinning under different roller-trace. (4) The reduction of thickness is the smallest under involute curve. The distribution of the thickness strain is very unequal under quadratic curves. The results obtained can provide references for selecting reasonable roller-trace in multi-pass conventional spinning.
基金Funded by National Natural Science Foundation of China(No.51401226)
文摘For TA15 titanium alloy, slip is the dominant plastic deformation mechanism because of relatively high Al content. In order to reveal the grain-scale stress field and geometrically necessary dislocation（GND） density distribution around the slip traces and phase boundaries where the slip lines are blocked due to Burgers orientation relationship（OR） missing. We experimentally investigated tensile deformation on TA15 titanium alloy up to 2.0% strain at room temperature. The slip traces were observed and identified using high resolution scanning electron microscopy（SEM） and electron backscatter diffraction（EBSD） measurements. The grain-scale stress fields around the slip traces and phase boundaries were calculated by the cross-correlationbased method. Based on strain gradient theories, the density of GND was calculated and analyzed. The results indicate that the grain-scale stress is significantly concentrated at phase/grain boundaries and slip traces. Although there is an obvious GND accumulation in the vicinity of phase and subgrain boundaries, no GND density accumulation appears near the slip traces.
文摘针对焊接锚垫板齿板锚固区配筋,提出了一种锚固区新型拉压杆模型。首先对齿板锚固区6种典型效应、主应力迹线以及力流平衡关系进行分析并建立新型拉压杆模型,其次通过美国国家公路与运输官员协会(American Association of State Highway and Transportation Officials,AASHTO)Load-and-resistance Factor Design Bridge Design Specifications、Building Code Requirements for Structural Concrete and Commentary(ACI 318-19)、《公路钢筋混凝土及预应力混凝土桥涵设计规范》(JTG 3362—2018)和欧洲设计建议Practical Design of Structural Concrete进行拉压杆模型参数定量化设计,根据拉压杆几何关系推导出焊接锚垫板齿板锚固区劈裂力计算式,利用有限元分析,拟合出焊接锚垫板下齿板锚固区劈裂力合力重心计算式。最后通过算例分析,按本文建议的拉压杆方法进行焊接锚垫板齿板锚固区结构配筋设计,能较好地控制锚下典型效应问题,相比《公路钢筋混凝土及预应力混凝土桥涵设计规范》(JTG 3362—2018)给出的设计方法,拉压杆模型法能较好地反映结构传力机制且具备可行性和可应用性,可为焊接锚垫板齿板锚固区配筋设计提供参考。
文摘In this paper, the author reported the effect of maifanite on the learning and memory of rats suffering Cd poisoning by step-down and step-through test, analyzed the content of MDA, MT, SOD, and GSH-Px in the hippocampus of rats respectively, and assayed the content of Fe, Cu, Zn, Mn, Se, and Cd in the hippocampus of rats. In the step-down test, it is found that maifanite can reduce the number of electric shock, prolong step-down latency, and cut down error times when rats are exposed to Cd 24 h. In the step-through test, maifanite can obviously prolong the latency of entering the dark cabin of rats suffering Cd poisoning. The exogenous Cd can lead to the decrease of SOD and GSH-Px activity and the increase of MDA and MT content. The alternation of maifanite and Cd by the gavage can significantly increase the SOD and GSH-Px activity as well as MT content, while lessening the MDA content. The accumulation of exogenous Cd in hippocampus causes the increase of Zn, Fe, Mn, and Cd content, and the decrease of Cu and Se content. The intake of maifanite can regulate the imbalance of metals content and make its content near to the of level control group. The research shows that maifanite can improve the ability of learning and memory of rats suffering Cd poisoning, increase MT formation and lower hyperoxidative damage. Maifanite has the function of balancing the content of trace elements in rats suffering Cd poisoning, and meanwhile can alleviate the toxicity of Cd effectively.
