A novel method for determining the resistivity of compressed superconducting materials

The measurement of resistivity in a compressed material within a diamond anvil cell presents significant challenges.The high-pressure exper-imental setup makes it difficult to directly measure the size changes induced by pressure in the three crystallographic directions of the sample.In this study,we introduce a novel and effective method that addresses these technical challenges.This method is anticipated to offer a valuable foundation for high-pressure investigations on quantum materials,particularly those with anisotropic layered structures.

Characterization of Aquifers in Crystalline and Crystallophyll Basement Zones Using the Electrical Resistivity Method (Trails and Electrical Soundings) in the Gagnoa Region, (Central-Western Côte d’Ivoire)

Introduction: Located in the central-western part of Côte d’Ivoire, the subsoil of the Gagnoa region is made up of sedimentary volcano formations and granitoids with developed fracturing. This complex Precambrian basement contains most of the region’s water resources. This is at the origin of the high failure rate during the various hydrogeological prospecting campaigns. Methodology: The database consists of resistivities from 42 holes and 51 trails drilled as part of the implementation of high-throughput drilling in the study area. The objective of this study is to deepen the knowledge of the fissured basement by interpreting profile curves and electrical soundings. It will be a question of classifying the different types of anomalies obtained on the profiles and their shapes. The orientation of the lineaments observed on the profiles was determined. Results: The interpretation of the geophysical data revealed various anomalies, the main ones being of the CC (Conductor Compartment) and CEDP (Contact between two bearings) types. These types of anomalies are mainly expressed in various forms: the “V”, “W” and “U” shapes. From these anomalies and the appearance of the electrical profiles, lineaments and their orientations were identified with N90-100, N130-140, N170-180 as major orientations. Conclusion: These results could contribute to a better understanding of the fractured environment of the Gagnoa region.

Resistivity tomography based on multichannel electrodes

With the constantly changing engineering construction sector,the detection accuracy of conventional electrical resistivity tomography(ERT)is no longer sufficient.A multichannel electrode design(MERT)-based ERT is introduced in this paper to address the growing need for resolution.The imaging accuracy of the ERT method is improved through the collection of apparent resistivity data in various directions by measuring the potential diff erence between diff erent channels.Numerical simulation results of the inclined high-resistivity anomaly model reveal that MERT is a precise representation of the shape,inclined direction,and buried depth of the anomaly,with thoroughfare M2N2 producing the most precise forward and inverse results.Based on the analysis results of the model resolution matrix,when the buried depth of power supply points and the gap between potential acquisition points are 30%-90%and 30%-60%of the electrode distance,respectively,the MERT approach yields superior detection outcomes.The detection eff ect of the MERT method on anomalous bodies with diff erent burial depths under the optimal parameters also indicates that the MERT method can obtain richer potential change information with higher resolution in deep areas compared to the ERT method.With the implementation of the MERT approach,the scope of applications for ERT is expanded,the accuracy of ERT detection is increased,and the progress of near-surface fine detection is positively infl uenced.

Experimental study on shear properties and resistivity change of soil-rock mixture

The deterioration of shear resistance in rock and soil masses has resulted in numerous severe natural disasters,highlighting the significance of long-term monitoring for disaster prevention and mitigation.This study explores the use of a non-destructive method to quickly and accurately evaluate the shear properties of soil-rock mixture.The shear stress,shear strain,and resistivity of the soil-rock mixture were tested simultaneously using a combination of direct shear and resistivity tests.The test results show that the resistivity of the soil-rock mixture gradually decreases with increasing shear strain.The resistivity of all specimens ranged approximately from 60 to 130Ω.m throughout the shear process.At the end of the shear test,the vertical failure resistivity showed an irregular“W”shape with increasing rock content.It exhibited a significant negative linear functional relationship with the shear strength.With reference to the determination of cohesion and internal friction angle on the shear strength envelope,the horizontal angle of the vertical failure resistivity-normal stress curve is defined as the resistivity angle,and the intercept of the curve is the resistivity at the initial moment of shear.It has been observed that the resistivity angle is negatively and linearly correlated with the internal friction angle.At the same time,there is a linear growth relationship between resistivity at the initial moment of shear and cohesion.It has been demonstrated that an increase in rock content contributes to a general escalation in both the average structure factor and average shape factor.Meanwhile,a decrease in the anisotropy coefficient has also been noted.These alterations are indicative of the extent of microstructural transformations occurring during the deformation process of the soil-rock mixture.The research results verify the feasibility of real-time deformation monitoring and characterization of shear strength parameters using resistivity.

Optimizing data for electrical resistivity tomography in hardened sites through the ratio method

To reduce the shielding effect of hardened layers on electrical resistivity tomography,a ratio method based on the distortion correction principle and the isolation coefficient is proposed.The effects of the resistivity and thickness of hardened concrete layers on the detection of target objects are explored.Both numerical simulations and indoor tank tests indicate that when the ratio method is employed to correct the original collected data,the maximum allowable error for the isolation coefficient should not exceed 1%.Notably,when the ratio of hardened layer thickness to electrode spacing does not exceed 1,correction through this method significantly enhances the recognition capability of target objects.However,when the hardened layer thickness is greater than the electrode spacing by a factor of 2 or more,the ratio method cannot achieve satisfactory results.The case study of flood control engineering detection in the Zhangxi section of the Huangpen River in Dongzhi County demonstrates that the detection effect after correction by the ratio method is comparable to that for the adjacent unhardened pavement,and the influence of the hardened layer is obviously weakened,resulting in more reliable results.

Study on theoretical model for electrical explosion resistivity of Al/Ni reactive multilayer foil

Al/Ni reactive multilayer foil(RMF)possesses excellent comprehensive properties as a promising substitute for traditional Cu bridge.A theoretical resistivity model of Al/Ni RMF was developed to guide the optimization of EFIs.Al/Ni RMF with different bilayer thicknesses and bridge dimensions were prepared by MEMS technology and electrical explosion tests were carried out.According to physical and chemical reactions in bridge,the electrical explosion process was divided into 5 stages:heating of condensed bridge,vaporization and diffusion of Al layers,intermetallic combination reaction,intrinsic explosion,ionization of metal gases,which are obviously shown in measured voltage curve.Effects of interface and grain boundary scattering on the resistivity of film metal were considered.Focusing on variations of substance and state,the resistivity was developed as a function of temperature at each stage.Electrical explosion curves were calculated by this model at different bilayer thicknesses,bridge dimensions and capacitor voltages,which showed an excellent agreement with experimental ones.

Cellular models of stress resistance may pave ways to fight neurodegenerative diseases

Alzheimer's disease(AD),the most common form of neurodegeneration,is characterized by selective neuronal vulnerability and brain regionselective neuron demise.The entorhinal cortex and hippoc,ampal CA1 projection neurons are at greater risk in AD whereas other regions display resistance to neurodegeneration.Interestingly,the cerebellum,a phylogenetically very old region,is affected only very late in the disease progression.

Understanding the link between type 2 diabetes mellitus and Parkinson's disease:role of brain insulin resistance

Type 2 diabetes mellitus and Parkinson's disease are chronic diseases linked to a growing pandemic that affects older adults and causes significant socio-economic burden.Epidemiological data supporting a close relationship between these two aging-related diseases have resulted in the investigation of shared pathophysiological molecular mechanisms.Impaired insulin signaling in the brain has gained increasing attention during the last decade and has been suggested to contribute to the development of Parkinson's disease through the dysregulation of several pathological processes.The contribution of type 2 diabetes mellitus and insulin resistance in neurodegeneration in Parkinson's disease,with emphasis on brain insulin resistance,is extensively discussed in this article and new therapeutic strategies targeting this pathological link are presented and reviewed.

Transient extreme insulin resistance in a critically ill patient:A case report

BACKGROUND Acute hyperglycemia due to insulin resistance is common in critically ill patients,typically managed with insulin infusion.However,the occurrence of transient extreme insulin resistance(EIR)requiring exceptional high-dose insulin is rare.CASE SUMMARY We present the case of a 68-year-old woman with pneumonia who suffered an out-of-hospital cardiac arrest,subsequently developing transient EIR following a new episode of sepsis.Remarkably,insulin resistance rapidly reversed when the insulin infusion rate peaked at 960 units/hour(a total of 18224 units on that day),and it was promptly titrated down to zero upon achieving the target glucose level.CONCLUSION Exceptional high-dose insulin infusion may be required in critically ill patients with stress-related EIR,which is typically transient.Clinicians should be aware of the phenomenon and cautious to avoid hypoglycemia and fluid overload during the steep titration of high-dose insulin infusion.

Microstructure and Wear/corrosion Resistance of Stainless Steel Laser-alloyed with Mn+W_(2)C, Mn+NiWC and Mn+SiC

In-situ formed high Mn steel coating reinforced by carbides was formed by laser surface alloying(LSA).Laser alloyed layers on 1Cr18Ni9Ti steel with Mn+W_(2)C(specimen A),Mn+NiWC(specimen B)and Mn+SiC(specimen C)powders were fabricated to improve the wear and corrosion behavior of 1Cr18Ni9Ti steel blades in high speed mixers.Microstructure evolution,phases,element distribution,microhardness,wear and corrosion behavior of the laser alloyed layers were investigated.Results indicated that high Mn steel matrix composites with undissolved W_(2)C,WC and other in-situ formed carbides were formed by LSA with Mn+W_(2)C and Mn+NiWC while SiC totally dissolved into the high Mn matrix when adding Mn+SiC.Ni as the binding phase in Ni-WC powder decreased the crack sensitivity of the alloyed layer as compared with the addition of W_(2)C powder.An improvement in average microhardness was achieved in the matrix in specimen A,B and C,with the value of 615,602 and 277 HV_(0.5),while that of the substrate was 212 HV_(0.5).The increase of microhardness,wear and corrosion resistance is highly corelated to microstructure,formed phases,type and content of carbides,micro-hardness and toughness of the alloyed layers.

Combined BRAF G469A mutation and echinoderm microtubule associated protein like-4-anaplastic lymphoma kinase rearrangement with resistance:A case report and review of literature

BACKGROUND Through deeper understanding of targetable driver mutations in non-small-cell lung cancer(NSCLC)over the past years,some patients with driver mutations have benefited from the targeted molecular therapies.Although the anaplastic lymphoma kinase and BRAF mutations are not frequent subtypes in NSCLC,the availability of several targeted-drugs has been confirmed through a series of clinical trials.But little is clear about the proper strategy in rare BRAF G469A mutation,not to mention co-exhibition of anaplastic lymphoma kinase and BRAF G469A mutations,which is extremely rare in NSCLC.CASE SUMMARY We present a patient to stage IVA lung adenocarcinoma with coexisting echinoderm microtubule associated protein like-4 rearrangement and BRAF G469A mutation.She received several targeted drugs with unintended resistance and suffered from unbearable adverse events.CONCLUSION Due to the rarity of co-mutations,the case not only enriches the limited literature on NSCLC harbouring BRAF G469A and echinoderm microtubule associated protein like-4 mutations,but also suggests the efficacy and safety of specific multiple-drug therapy in such patients.

Influence of laser shock peening on microstructure and high-temperature oxidation resistance of Ti45Al8Nb alloy fabricated via laser melting deposition

Laser shock peening(LSP)was used to enhance the high-temperature oxidation resistance of laser melting deposited Ti45Al8Nb alloy.The microstructure and high-temperature oxidation behavior of the as-deposited Ti45Al8Nb alloy before and after LSP were investigated by scanning electron microscopy,X-ray diffraction,and electron backscatter diffraction.The results indicated that the rate of mass gain in the as-deposited sample after LSP exhibited a decrease when exposed to an oxidation temperature of 900℃,implying that LSP-treated samples exhibited superior oxidation resistance at high temperatures.A gradient structure with a fine-grain layer,a deformed-grain layer,and a coarse-grain layer was formed in the LSP-treated sample,which facilitated the diffusion of the Al atom during oxidation,leading to the formation of a dense Al_(2)O_(3)layer on the surface.The mechanism of improvement in the oxidation resistance of the as-deposited Ti45Al8Nb alloy via LSP was discussed.

Corrosion resistance and antibacterial properties of Ti−3Cu alloy prepared by selective laser melting

The corrosion resistance and antibacterial properties of Ti−3Cu alloy prepared by selective laser melting were evaluated using electrochemical experiments and a variety of antibacterial characterization.It is found that the charge transfer resistance of Ti−3Cu alloy was 4.89×10^(5)Ω∙cm^(2),which was doubled the data obtained by CP-Ti alloy.The antibacterial rates of Ti−3Cu alloy against S.mutans and P.gingivalis were 45.0%and 54.5%.And the antibacterial rates increased with the prolongation of cultivation time,reaching up to 62.8%and 68.6%,respectively.The in-situ nano Ti_(2)Cu precipitates were homogeneously distributed in the matrix of the Ti−3Cu alloy,which was the key reason of increasing the corrosion resistance.Additionally,the microscale electric fields between theα-Ti matrix and the Ti_(2)Cu was responsible for the enhancement of the antibacterial properties.

Selenoprotein P1 as a biomarker of insulin resistance in pediatric obesity:Insights and implications

This editorial discusses the findings of Elbarky et al on the role of selenoprotein P1(SEPP1)in pediatric obesity and insulin resistance.Their study uncovered si-gnificantly lower SEPP1 Levels in children who were obese compared with hea-lthy peers,demonstrating a negative correlation between SEPP1 levels and mea-sures of adiposity and insulin resistance.These findings suggest that SEPP1 is a biomarker useful in the early identification of insulin resistance in pediatric populations.This editorial emphasizes the clinical implications of the study and calls for further research to validate and explore the role of SEPP1 in metabolic health.

Efficacy of antimicrobials in preventing resistance in solid organ transplant recipients:A systematic review of clinical trials

BACKGROUND In the absence of effective antimicrobials,transplant surgery is not viable,and antirejection immunosuppressants cannot be administered,as resistant infections compromise the life-saving goal of organ transplantation.AIM To evaluate the efficacy of antimicrobials in preventing resistance in solid organ transplant recipients.METHODS A systematic review was conducted using a search methodology consistent with the preferred reporting items for systematic reviews and meta-analyses.This review included randomized clinical trials that evaluated the efficacy of antimicrobial agents(prophylactic or therapeutic)aimed at preventing antimicrobial resistance.The search strategy involved analyzing multiple databases,including PubMed/MEDLINE,Web of Science,Embase,Scopus,and SciELO,as well as examining gray literature sources on Google Scholar.A comprehensive electronic database search was conducted from the databases’inception until May 2024,with no language restrictions.RESULTS After the final phase of the eligibility assessment,this systematic review ultimate-ly included 7 articles.A total of 2318 patients were studied.The most studied microorganisms were cytomegalovirus,although vancomycinresistant enterococci,Clostridioides difficile,and multidrug-resistant Enterobacterales were also analyzed.The antimicrobials used in the interventions were mainly maribavir,valganciclovir,gancic-lovir,and colistin-neomycin.Of concern,all clinical trials showed significant proportions of resistant microorga-nisms after the interventions,with no statistically significant differences between the groups(mean resistance 13.47%vs 14.39%),except for two studies that demonstrated greater efficacy of maribavir and valganciclovir(mean resistance 22.2%vs 41.1%in the control group;P<0.05).The total reported deaths in three clinical trials were 75,and there were 24 graft rejections in two studies.CONCLUSION All clinical trials reported significant proportions of antimicrobial-resistant microorganisms following interventions.More high-quality randomized clinical trials are needed to corroborate these results.

Advances in genotypic antimicrobialresistance testing: a comprehensive review

Antimicrobial resistance(AMR)represents a substantial threat to global public health,complicating the treatment of common infections and leading to prolonged illness and escalated healthcare expenses.To effectively combat AMR,timely and accurate detection is crucial for AMR surveillance and individual-based therapy.Phenotypic antibiotic resistance testing(AST)has long been considered the gold standard in clinical applications,serving as the foundation for clinical AMR diagnosis and optimized therapy.It has significantly contributed to ensuring patients′health and the development of novel antimicrobials.Despite advancements in automated culture-based AST technologies,inherent limitations impede the widespread use of phenotypic AST in AMR surveillance.Genotypic AST technologies offer a promising alternative option,exhibiting advantages of rapidity,high sensitivity,and specificity.With the continuous advancement and expanding applications of genotypic AST technologies,such as microfluidics,mass spectrometry,and high-resolution melting curve analysis,new vigor has been injected into the development and clinical implementation of genotypic AST technologies.In this narrative review,we discuss the principles,applications,and advancements of emerging genotypic AST methods in clinical settings.The comprehensive review aims to highlight the significant scientific potential of emerging genotypic AST technologies in clinical AMR diagnosis,providing insights to enhance existing methods and explore novel approaches.

Research Progress of Massage Therapy for Obesity-Induced Insulin Resistance

By searching the relevant literature in recent ten years,this paper summarizes the research progress of massage in the treatment of obesity-induced insulin resistance,in order to provide more basis for massage in the treatment of obesity-induced insulin resistance.

Genome-wide investigation of defensin genes in apple(Malus×domestica Borkh.) and in vivo analyses show that MdDEF25 confers resistance to Fusarium solani

Apple replant disease is a complex soil syndrome that occurs when the same fields are repeatedly utilized for apple orchard cultivation.It can be caused by various pathogens,and Fusarium solani is the main pathogen.Fusarium solani disrupts the structure and function of the orchard soil ecosystem and inhibits the growth and development of apple trees,significantly impacting the quality and yield of apples.In this study,we conducted a transcriptome comparison between uninoculated apple saplings and those inoculated with F:solani.The differentially expressed genes were mainly enriched in processes such as response to symbiotic fungus.Plant defensins are antimicrobial peptides,but their roles during F.solani infection remain unclear.We performed a genome-wide identification of apple defensin genes and identified 25 genes with the conserved motif of eight cysteine residues.In wildtype apple rootstock inoculated with F.solani,the root surface cells experienced severe damage,and showed significant differences in the total root length,total root projection area,root tips,root forks,and total root surface area compared to the control group.qRT-PCR analysis revealed that MdDEF3 and MdDEF25 were triggered in response to F.solani infection in apples.Subcellular localization showed specific expression of the MdDEF3-YFP and MdDEF25-YFP proteins on the cell membrane.Overexpressing theMdDEF25-YFP fusiongene enhanced resistance against F.solani in apple,providing a new strategy for the future prevention and biological control of apple replantdisease.

Application of myxovirus resistance protein A in the etiological diagnosis of infections in adults

BACKGROUND: Inappropriate antibiotic treatment for patients with viral infections has led to a surge in antimicrobial resistance, increasing mortality and healthcare costs. Viral and bacterial infections are often difficult to distinguish. Myxovirus resistance protein A(MxA), an essential antiviral factor induced by interferon after viral infection, holds promise for distinguishing between viral and bacterial infections. This study aimed to determine the ability of Mx A to distinguish viral from bacterial infections.METHODS: We quantified MxA in 121 infected patients via dry immunofluorescence chromatography. The Kruskal-Wallis test and receiver operating characteristic(ROC) curve analysis were used to determine the diagnostic value of Mx A, either alone or in combination with C-reactive protein(CRP) or procalcitonin(PCT), in patients with viral, bacterial, or co-infections.RESULTS: The value of MxA(ng/mL) was significantly higher in patients with viral infections than in those with bacterial and co-infections(82.3 [24.5–182.9] vs. 16.4 [10.8–26.5], P<0.0001)(82.3 [24.5–182.9] vs. 28.5 [10.2–106.8], P=0.0237). The area under the curve(AUC) of the ROC curve for distinguishing between viral and bacterial infections was 0.799(95% confidence interval [95% CI] 0.696–0.903), with a sensitivity of 68.9%(95% CI 54.3%–80.5%) and specificity of 90.0%(95% CI 74.4%–96.5%) at the threshold of 50.3 ng/mL. Combining the MxA level with the CRP or PCT level improved its ability. MxA expression was low in cytomegalovirus(15.8 [9.6–47.6] ng/mL) and Epstein-Barr virus(12.9 [8.5–21.0] ng/mL) infections.CONCLUSION: Our study showed the diagnostic efficacy of Mx A in distinguishing between viral and bacterial infections, with further enhancement when it was combined with CRP or PCT. Moreover, EpsteinBarr virus and human cytomegalovirus infections did not elicit elevated Mx A expression.

Construction of attapulgite-based one-dimensional nanonetwork composites with corrosion resistance for high-efficiency microwave absorption

Exploring high-efficiency and broadband microwave absorption(MA)materials with corrosion resistance and low cost is ur-gently needed for wide practical applications.Herein,the natural porous attapulgite(ATP)nanorods embedded with TiO_(2)and polyaniline(PANI)nanoparticles are synthesized via heterogeneous precipitation and in-situ polymerization.The obtained PANI-TiO_(2)-ATP one-di-mensional(1D)nanostructures can intertwine into three-dimensional(3D)conductive network,which favors energy dissipation.The min-imum reflection loss(RL_(min))of the PANI-TiO_(2)-ATP coating(20wt%)reaches-49.36 dB at 9.53 GHz,and the effective absorption band-width(EAB)can reach 6.53 GHz with a thickness of 2.1 mm.The excellent MA properties are attributed to interfacial polarization,mul-tiple loss mechanisms,and good impedance matching induced by the synergistic effect of PANI-TiO_(2)nanoparticle shells and ATP nanor-ods.In addition,salt spray and Tafel polarization curve tests reveal that the PANI-TiO_(2)-ATP coating shows outstanding corrosion resist-ance performance.This study provides a low-cost and high-efficiency strategy for constructing 1D nanonetwork composites for MA and corrosion resistance applications using natural porous ATP nanorods as carriers.