Stretch bending defect control of L-section SUS301L stainless-steel components with variable contour curvatures

The stretch bending of L-section variable-curvature SUS301L stainless-steel roof bending beams for metro vehicles was numerically simulated.The causes of defects such as wrinkling,section distortion,and poor contour accuracy were analysed,and the corresponding control methods were proposed.The simulation results demonstrated that wrinkling in the small-arc segment could be eliminated by setting the die clearance and adjusting the elongation reasonably.Owing to the sidewall shrinkage of the profile in the process of stretch bending,the die groove depth was correspondingly reduced.Each section of the profile was effectively supported by the bottom of the die groove,and the section distortion could be controlled.Springback was the main reason for the poor contour accuracy,which could be compensated by modifying the die surface based on the springback value.Using the above defect control methods,forming experiments were performed on a new type of stretch bending die with variable die clearance and groove depth developed in this work.Finally,high-quality components were obtained,which verified the efficacy of the defect control methods.

Determining knots by optimizing the bending and stretching energies

For a given set of data points in the plane, a new method is presented for computing a parameter value（knot） for each data point. Associated with each data point, a quadratic polynomial curve passing through three adjacent consecutive data points is constructed. The curve has one degree of freedom which can be used to optimize the shape of the curve. To obtain a better shape of the curve, the degree of freedom is determined by optimizing the bending and stretching energies of the curve so that variation of the curve is as small as possible. Between each pair of adjacent data points, two local knot intervals are constructed, and the final knot interval corresponding to these two points is determined by a combination of the two local knot intervals. Experiments show that the curves constructed using the knots by the new method generally have better interpolation precision than the ones constructed using the knots by the existing local methods.

Geochemical signatures of potassium metasomatism in anthracite from the Himalayan fold‑thrust belts of Sikkim,India

The present study focuses on the inorganic geochemical features of the bituminous coal samples from the Raniganj and the Jharia Basins,as well as the anthracite samples from the Himalayan fold-thrust belts of Sikkim,India.The SiO_(2)content(48.05 wt%to 65.09 wt%and 35.92 wt%to 50.11 wt%in the bituminous and anthracite samples,respectively)and the ratio of Al_(2)O_(3)/TiO_(2)(6.97 to 17.03 in the bituminous coal samples and 10.34 to 20.07 in the anthracite samples)reveal the intermediate igneous source rock composition of the minerals.The ratio of the K_(2)O/Al_(2)O_(3)in the ash yield of the bituminous coal samples(0.03 to 0.09)may suggest the presence of kaolinite mixed with montmorillonite,while its range in the ash yield of the anthracite samples(0.16 to 0.27)may imply the presence of illite mixed with kaolinite.The chemical index of alteration values may suggest the moderate to strong chemical weathering of the source rock under sub-humid to humid climatic conditions.The plot of the bituminous coal samples in the A–CN–K diagram depicts the traditional weathering trend of parent rocks,but the anthracite samples plot near the illite feld and are a bit ofset from the weathering trend.This may imply the plausible infuences of the potassium-metasomatism at post coalifcation stages,which is further supported by high K_(2)O/Na_(2)O ratio(29.88–80.13).The Fourier transform infrared spectra further reveal the hydroxyl stretching intensity of illite in the anthracite samples substantiating the efect of the epigenetic potassium-metasomatism.The decrease in total kaolinite intensity/compound intensity of quartz and feldspar may provide additional evidence towards this epigenetic event.

High-order harmonic generation of CO_2 with different vibrational modes in an intense laser field

We apply the strong-field Lewenstein model to demonstrate the high-order harmonic generation of CO2 with three vibrational modes（balance vibration,bending vibration,and stretching vibration） driven by an intense laser field.The results show that the intensity of harmonic spectra is sensitive to molecular vibrational modes,and the high harmonic efficiency with stretching vibrational mode is the strongest.The underlying physical mechanism of the harmonic emission can be well explained by the corresponding ionization yield and the time-frequency analysis.Finally,we demonstrate the attosecond pulse generation with different vibrational modes and an isolated attosecond pulse with a duration of about 112 as is generated.