A large-scale pop-up structure occurs at the front of the northern Dabashan thrust belt (NDTB), bound by the NNE-dipping Chengkou fault to the south, and the SSW-dipping Gaoqiao fault to the north. The pop-up struct...A large-scale pop-up structure occurs at the front of the northern Dabashan thrust belt (NDTB), bound by the NNE-dipping Chengkou fault to the south, and the SSW-dipping Gaoqiao fault to the north. The pop-up structure shows different features along its strike as a direct reflection of the intensity of tectonic" activity. To the northwest, the structure is characterized by a two-directional thrust system forming a positive flower-like structure. In contrast, the southeastern part is composed of the vertical Chengkou fault and a series of N-directed backthrusts, showing a semi-flower-like structure. We present results from Ar-Ar dating of syntectonic microthermal metamorphic sericite which show that the Chengkou fault experienced intense deformation during the mid-Mesozoic Yanshanian epoch (about 143.3 Ma), causing rapid uplift and thrusting of the northern Dabashan thrust belt. During the propagation of this thrust, a series of backthrusts formed because of the obstruction from the frontier of Dabashan thrust belt, leading to the development of the pop-up structure.展开更多
The Yuxi (豫西) fold-thrust fracture belt is part of the gigantic fold-thrust fracture belt that extends NW in the southern North China plate. The contents of major elements of tectonites were analyzed by ICP-AES. T...The Yuxi (豫西) fold-thrust fracture belt is part of the gigantic fold-thrust fracture belt that extends NW in the southern North China plate. The contents of major elements of tectonites were analyzed by ICP-AES. The analysis of chemical compositions and new stress minerals indicates: extending from the surrounding country rocks to the center of the fracture belt, the Fe2O3 content gradually increases while the FeO content gradually decreases; regular increase, decrease or peak changes are shown for chemical compositions like SiO2, Al2O3, Fe2O3, MgO, CaO, FeO, loss on ignition, TIO:, K2O, Na2 O, etc.. New stress minerals are developed for the south branch and few for the north branch. The characteristics of chemical compositions and new stress minerals of the thrust fracture demonstrate that the fracture belt has undergone a process from a closed reducing environmental system to a relatively open. oxidizing environmental system, andcompressive fractures have resulted from compression in the late stages of evolution, and the dynamothermal metamorphism and thrusting intensities are different between the south and north branches of the belt, which is strong for the south branch but relatively weak for the north branch.展开更多
Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western sectio...Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western section of the foreland thrust belt in southern Junggar Basin are investigated. The target reservoirs are characterized by superimposition of conglomerates, sandy conglomerates and sandstones, with high content of plastic clasts. The reservoir space is mainly composed of intergranular pores. The reservoirs are overall tight, and the sandy conglomerate has the best physical properties. The coupling of short deep burial period with low paleotemperature gradient and formation overpressure led to the relatively weak diagenetic strength of the reservoirs. Specifically, the sandy conglomerates show relatively low carbonate cementation, low compaction rate and high dissolution porosity. The special stress-strain mechanism of the anticline makes the reservoirs at the top of the anticline turning point more reformed by fractures than those at the limbs, and the formation overpressure makes the fractures in open state. Moreover, the sandy conglomerates have the highest oil saturation. Typical anticline reservoirs are developed in deep part of the thrust belt, but characterized by "big trap with small reservoir". Significantly, the sandy conglomerates at the top of anticline turning point have better quality, lower in-situ stress and higher structural position than those at the limbs,with the internal hydrocarbons most enriched, making them high-yield oil/gas layers. The exponential decline of fractures makes hydrocarbon accumulation difficult in the reservoirs at the limbs. Nonetheless, plane hydrocarbon distribution is more extensive at the gentle limb than the steep limb.展开更多
The West Junggar Orogenic Belt(WJOB)in northwestern Xinjiang,China,is located in the core of the western part of the Central Asian Orogenic Belt(CAOB).It has suffered two stage tectonic evolutions in Phanerozoic,befor...The West Junggar Orogenic Belt(WJOB)in northwestern Xinjiang,China,is located in the core of the western part of the Central Asian Orogenic Belt(CAOB).It has suffered two stage tectonic evolutions in Phanerozoic,before and after the ocean–continental conversion in Late Paleozoic.The later on intracontinental deformation,characterized by the development of the NE-trending West Junggar sinistral strike-slip fault system(WJFS)since Late Carboniferous and Early Permian,and the NW-trending Chingiz-Junggar dextral strike-slip fault(CJF)in Mesozoic and Cenozoic,has an important significance for the tectonic evolution of the WJOB and the CAOB.In this paper,we conduct geometric and kinematic analyses of the WJOB,based on field geological survey and structural interpretation of remote sensing image data.Using some piercing points such as truncated plutons and anticlines,an average magnitude of^73 km for the left-lateral strike-slip is calculated for the Darabut Fault,a major fault of the WJFS.Some partial of the displacement should be accommodated by strike-slip fault-related folds developed during the strike-slip faulting.Circular and curved faults,asymmetrical folds,and irregular contribution of ultramafic bodies,implies potential opposite vertical rotation of the Miao’ergou and the Akebasitao batholiths,resulted from the sinistral strike-slipping along the Darabut Fault.Due to conjugate shearing set of the sinistral WJFS and the dextral CJF since Early Mesozoic,superimposed folds formed with N–S convergence in southwestern part of the WJOB.展开更多
Taking the Paleogene salt strata in the west of Kuqa foreland thrust belt as study object, the deformation features of salt structure in the compression direction and perpendicular to the compression direction were ex...Taking the Paleogene salt strata in the west of Kuqa foreland thrust belt as study object, the deformation features of salt structure in the compression direction and perpendicular to the compression direction were examined to find out the control factors and formation mechanisms of the salt structures. By using the three-dimensional discrete element numerical simulation method, the formation mechanisms of typical salt structures of western Kuqa foreland thrust belt in Keshen and Dabei work areas were comprehensively analyzed. The simulation results show that the salt deformation in Keshen and Dabei work areas is of forward spread type, with deformation concentrated in the piedmont zone;the salt deformation is affected by the early uplift near the compression end, pre-existing basement faults, synsedimentary process and the initial salt depocenter;in the direction perpendicular to the compression direction, salt rocks near the compression end have strong lateral mobility with the velocity component moving towards the middle part, and the closer to the middle, the larger the velocity will be, so that salt rocks will aggregate towards the middle and deform intensely, forming complex folds and separation of salt structures from salt source, and local outcrop with thrust faults. Compared with 2 D simulation, 3 D simulation can analyze salt structures in the principal stress direction and direction perpendicular to the principal stress, give us a full view of the formation mechanisms of salt structures, and guide the exploration of oil and gas reservoirs related to salt structures.展开更多
The northwestern Sichuan region has experienced multi-stage tectonic evolution including marine cratonic basin from the Sinian to the Middle Triassic and intra-continental basin from the Late Triassic to the Cenozoic....The northwestern Sichuan region has experienced multi-stage tectonic evolution including marine cratonic basin from the Sinian to the Middle Triassic and intra-continental basin from the Late Triassic to the Cenozoic. Several regional tectonic activities caused complicated stratigraphic distribution and structural deformations in the deep-buried layers. During the key tectonic periods, some characteristic sedimentary and deformation structures were formed, including the step-shaped marginal carbonate platform of Dengying Formation, the western paleo-high at the end of Silurian, and the passive continental margin of the Late Paleozoic–Middle Triassic. The Meso-Cenozoic intra-continental compressional tectonic processes since the Late Triassic controlled the formation of complex thrusting structures surrounding and inside the northwestern basin. The northern Longmenshan fold-thrust belt has a footwall in-situ thrust structure,which is controlled by two sets of detachments in the Lower Triassic and Lower Cambrian and presents as a multi-level deformation structure with the shallow folds, the middle thin-skin thrusts and the deeper basement-involved folds. The thrust belt in front of the Micangshan Mountain shows a double-layer deformation controlled by the Lower Triassic salt detachment, which is composed by the upper monocline and deep-buried imbricate thrust structures. The interior of the basin is characterized by several rows of large-scale basement-involved folds with NEE strike direction. From the perspective of structural geology, the favorable exploration reservoirs and belts in northwestern Sichuan have obvious zoning characteristics. The favorable exploration layers of Dengying Formation of Upper Sinian are mainly distributed in the eastern and northern areas of the northwestern Sichuan Basin, in which the Jiulongshan structural belt, Zitong syncline and Yanting slope are the most favorable. The Lower Paleozoic was transformed by Caledonian paleo-uplift and late Cenozoic folding, and the midwest area such as the Zitong syncline is a potential area for hydrocarbon exploration. The favorable part of the Upper Paleozoic is mainly distributed in the northern Longmenshan belt and its frontal area, where the deep-buried thin-skin thrust structures in the footwall are the key exploration targets.展开更多
Well Zhongqiu 1 obtained highly productive oil-gas stream in the footwall of Zhongqiu structure, marking the strategic breakthrough of Qiulitag structural belt in the Tarim Basin. However, the oil and gas sources in Z...Well Zhongqiu 1 obtained highly productive oil-gas stream in the footwall of Zhongqiu structure, marking the strategic breakthrough of Qiulitag structural belt in the Tarim Basin. However, the oil and gas sources in Zhongqiu structural belt and the reservoir formation process in Zhongqiu 1 trap remain unclear, so study on these issues may provide important basis for the next step of oil and gas exploration and deployment in Qiulitage structural belt. In this study, a systematic correlation of oil and gas source in Well Zhongqiu 1 has been carried out. The oil in Well Zhongqiu 1 is derived from Triassic lacustrine mudstone, while the gas is a typical coal-derived gas and mainly from Jurassic coal measures. The oil charging in Well Zhongqiu 1 mainly took place during the sedimentary period from Jidike Formation to Kangcun Formation in Neogene, and the oil was mainly contributed by Triassic source rock;large-scale natural gas charging occurred in the sedimentary period of Kuqa Formation in Neogene, and the coal-derived gas generated in the late Jurassic caused large-scale gas invasion to the early Triassic crude oil reservoirs. The Zhongqiu 1 trap was formed earlier than or at the same period as the hydrocarbon generation and expulsion period of Triassic-Jurassic source rocks. Active faults provided paths for hydrocarbon migration. The source rocks-faults-traps matched well in time and space. Traps in the footwall of the Zhongqiu structural fault have similar reservoir-forming conditions with the Zhongqiu 1 trap, so they are favorable targets in the next step of exploration.展开更多
Abstract The nearly E-W-trending Aqqikkudug-Weiya zone, more than 1000 km long and about 30 km wide, is an important segment in the Central Asian tectonic framework. It is distributed along the northern margin of the ...Abstract The nearly E-W-trending Aqqikkudug-Weiya zone, more than 1000 km long and about 30 km wide, is an important segment in the Central Asian tectonic framework. It is distributed along the northern margin of the Central Tianshan belt in Xinjiang, NW China and is composed of mylonitized Early Palaeozoic greywacke, volcanic rocks, ophiolitic blocks as a mélange complex, HP/LT-type bleuschist blocks and mylonitized Neoproterozoic schist, gneiss and orthogneiss. Nearly vertical mylonitic foliation and sub-horizontal stretching lineation define its strike-slip feature; various kinematic indicators, such as asymmetric folds, non-coaxial asymmetric macro- to micro-structures and C-axis fabrics of quartz grains of mylonites, suggest that it is a dextral strike-slip ductile shear zone oriented in a nearly E-W direction characterized by “flower” strusture with thrusting or extruding across the zone toward the two sides and upright folds with gently plunging hinges. The Aqqikkudug-Weiya zone experienced at least two stages of ductile shear tectonic evolution: Early Palaeozoic north vergent thrusting ductile shear and Late Carboniferous-Early Permian strike-slip deformation. The strike-slip ductile shear likely took place during Late Palaeozoic time, dated at 269±5 Ma by the40Ar/39Ar analysis on neo-muscovites. The strike-slip deformation was followed by the Hercynian violent S-type granitic magmatism. Geodynamical analysis suggests that the large-scale dextral strike-slip ductile shearing is likely the result of intracontinental adjustment deformation after the collision of the Siberian continental plate towards the northern margin of the Tarim continental plate during the Late Carboniferous. The Himalayan tectonism locally deformed the zone, marked by final uplift, brittle layer-slip and step-type thrust faults, transcurrent faults and E-W-elongated Mesozoic-Cenozoic basins.展开更多
The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Ol...The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Oligocene-Quaternary supra-salt sequence. The salt sequence is composed mainly of light grey halite, gypsum, marl and brown elastics. A variety of salt-related structures have developed in the Kuqa foreland fold belt, in which the most fascinating structures are salt nappe complex. Based on field observation, seismic interpretation and drilling data, a large-scale salt nappe complex has been identified. It trends approximately east-west for over 200 km and occurs along the west Qiulitag Mountains. Its thrusting displacement is over 30 km. The salt nappe complex appears as an arcuate zone projecting southwestwards along the leading edge of the Kuqa foreland fold belt. The major thrust fault is developed along the Paleocene-Eocene salt beds. The allochthonous nappes comprise large north-dipping faulting monoclines which are made up of Paleocene-Pliocene sediments. Geological analysis and cross-section restoration revealed that the salt nappes were mainly formed at the late Himalayan stage (c.a. 1.64 Ma BP) and have been active until the present day. Because of inhomogeneous thrusting, a great difference may exist in thrust displacement, thrust occurrence, superimposition of allochthonous and autochthonous sequences and the development of the salt-related structures, which indicates the segmentation along the salt nappes. Regional compression, gravitational gliding and spreading controlled the formation and evolution of the salt nappe complex in the Kuqa foreland fold belt.展开更多
Recent discoveries of ophiolites indicate that there must be a Palaeotethyan geosuture zone bordering China and Vietnam, which separates the Vietbac block from the South China subcontinent. The Indosinian foreland fol...Recent discoveries of ophiolites indicate that there must be a Palaeotethyan geosuture zone bordering China and Vietnam, which separates the Vietbac block from the South China subcontinent. The Indosinian foreland fold-and-thrust belt bordering Yunnan and Guangxi provided further evidence for the palaeotethysides. The oceanic crust was subducted southwestwards while the magmatic arc migrated northeastwards, and the continent-arc collision occurred in the Late Triassic with the thrusting being extended towards the north or northeast. The features of thrust-nappe structure are discussed, which proved the continental margin of the Palaeotethyan ocean there to be a complicated one. A face-to-face collision occurred first along the NW-striking segment and then along the ENE-striking segment accompanied by transpression or oblique thrusting occurring along the NW-striking one.展开更多
According to the differences of structural deformation characteristics, the southern margin of the Junggar basin can be divided into two segments from east to west. Arcnate thrust-and-fold belts that protrude to the n...According to the differences of structural deformation characteristics, the southern margin of the Junggar basin can be divided into two segments from east to west. Arcnate thrust-and-fold belts that protrude to the north are developed in the eastern segment. There are three rows of en echelon thrust-and-fold belts in the western segment. Thrust and fold structures of basement-involved styles are developed in the first row, and decollement fold structures are formed from the second row to the third row. In order to study the factors controlling the deformation of structures, sand-box experiments have been devised to simulate the evolution of plane and profile deformation. The planar simulation results indicate that the orthogonal compression coming from Bogeda Mountain and the oblique compression with an angle of 75° between the stress and the boundary originating from North Tianshan were responsible for the deformation differences between the eastern part and the western part. The Miquan-Uriimqi fault in the basement is the pre-existing condition for generating fragments from east to west. The profile simulation results show that the main factors controlling the deformation in the eastern part are related to the decollement of Jurassic coal beds alone, while those controlling the deformation in the western segment are related to both the Jurassic coal beds and the Eogene clay beds. The total amount of shortening from the Yaomoshan anticline to the Gumudi anticline in the eastern part is -19.57 km as estimated from the simulation results, and the shortening rate is about 36.46%; that from the Qingshuihe anticline to the Anjihai anticline in the western part is -22.01 km as estimated by the simulation results, with a shortening rate of about 32.48%. These estimated values obtained from the model results are very close to the values calculated by means of the balanced cross section.展开更多
Through field geological investigation and seismic interpretation of the Longmen (龙门) Mountain thrust belt, we summarized the following structural styles: thrust belt, fault-related fold (fault bend fold, fault ...Through field geological investigation and seismic interpretation of the Longmen (龙门) Mountain thrust belt, we summarized the following structural styles: thrust belt, fault-related fold (fault bend fold, fault propagation fold, and fault decollement fold), pop-up, triangle zone, duplex, superimposed fold, ductile deformation structures, reverse thrust fault, klippe, decollement structure,etc.. These structural styles have evident distribution characteristics; they had zonation and segmentation in plane. The zonation presents as the thrust nappe tectonic zone to the west of Tongjichang (通济场) fault, fault-related folds between Tongjichang fault and Guankou (关口) fault, and low and mild folds to the east of Guankou fault. The segmentation is evidenced as the scale of reverse thrust faults was minor between Tongjichang No. 1 fault and Tongjichang No. 2 fault. The distance between these two faults became long in the Daynanbao (大园包) structure, and there developed typical fault propagation fold and pop-up between these two faults. Furthermore, the structures had stratifi-cation in profile. The salt layer of T21 provided good conditions for the formation and development of large listric thrust faults; the thrust fault slipped in the salt layer and formed decollement structures and fault-related fold. At the same time, there formed duplex and reverse thrust faults between the two decollement layers.展开更多
The west Kunlun fold-thrust belt (WKFTB) and the Altun fold-thrust belt (AFTB) are respectively located in the southern margin of the Tarim basin, NW China. The analyses of typical structures and regional dynamics of ...The west Kunlun fold-thrust belt (WKFTB) and the Altun fold-thrust belt (AFTB) are respectively located in the southern margin of the Tarim basin, NW China. The analyses of typical structures and regional dynamics of the fold-thrust belts reveal their different structural and pe-troleum features and mechanisms. WKFTB differs from AFTB by abundant fault-related folds and triangles zones, and was formed by northward extrusion of the west Kunlun orogen. AFTB was affected synchronously by northward extrusion of the Altun orogen and the sinistral strike-slipping of the Altun Fault, so it is characterized by the minor scale and the monotonous structural styles. The Aqike anticline and the Aqike fault, of which the strikes are orthogonal to the strike of the fold-thrust belts, are regarded as the adjustive structures between both of the fold-thrust belts. The oil-gas pools of WKFTB develop mainly in the faulted-related anticline traps, but the oil-gas pools of AFTB develop mainly in the low fault-block and anticlines traps related with the pa-leo-uplifts. There are different exploration countermeasures for both of the fold-thrust belts.展开更多
基金supported by NationaI Natural Science Foundation of China(No.40821002)major project of China Petrochemical Corporation(Sinopec Group) for fundamental research(ContinentaI Tectonics and Prospects of Marine Origin Hydrocarbon Resource in The Middle-Upper Yangtze Region, Southern China,No.YPH08001-01)
文摘A large-scale pop-up structure occurs at the front of the northern Dabashan thrust belt (NDTB), bound by the NNE-dipping Chengkou fault to the south, and the SSW-dipping Gaoqiao fault to the north. The pop-up structure shows different features along its strike as a direct reflection of the intensity of tectonic" activity. To the northwest, the structure is characterized by a two-directional thrust system forming a positive flower-like structure. In contrast, the southeastern part is composed of the vertical Chengkou fault and a series of N-directed backthrusts, showing a semi-flower-like structure. We present results from Ar-Ar dating of syntectonic microthermal metamorphic sericite which show that the Chengkou fault experienced intense deformation during the mid-Mesozoic Yanshanian epoch (about 143.3 Ma), causing rapid uplift and thrusting of the northern Dabashan thrust belt. During the propagation of this thrust, a series of backthrusts formed because of the obstruction from the frontier of Dabashan thrust belt, leading to the development of the pop-up structure.
基金This paper is supported by the Key Basic Research Project funded by theChinese Academy of Sciences (No . KZCX2-SW-117) .
文摘The Yuxi (豫西) fold-thrust fracture belt is part of the gigantic fold-thrust fracture belt that extends NW in the southern North China plate. The contents of major elements of tectonites were analyzed by ICP-AES. The analysis of chemical compositions and new stress minerals indicates: extending from the surrounding country rocks to the center of the fracture belt, the Fe2O3 content gradually increases while the FeO content gradually decreases; regular increase, decrease or peak changes are shown for chemical compositions like SiO2, Al2O3, Fe2O3, MgO, CaO, FeO, loss on ignition, TIO:, K2O, Na2 O, etc.. New stress minerals are developed for the south branch and few for the north branch. The characteristics of chemical compositions and new stress minerals of the thrust fracture demonstrate that the fracture belt has undergone a process from a closed reducing environmental system to a relatively open. oxidizing environmental system, andcompressive fractures have resulted from compression in the late stages of evolution, and the dynamothermal metamorphism and thrusting intensities are different between the south and north branches of the belt, which is strong for the south branch but relatively weak for the north branch.
基金Supported by the National Natural Science Foundation of China (41902118)Natural Science Foundation of Xinjiang Uygur Autonomous Region (2022D01B141)+1 种基金Natural Science Foundation of Heilongjiang Province (LH2021D003)Heilongjiang Postdoctoral Fund (No.LBH-Z20045)。
文摘Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western section of the foreland thrust belt in southern Junggar Basin are investigated. The target reservoirs are characterized by superimposition of conglomerates, sandy conglomerates and sandstones, with high content of plastic clasts. The reservoir space is mainly composed of intergranular pores. The reservoirs are overall tight, and the sandy conglomerate has the best physical properties. The coupling of short deep burial period with low paleotemperature gradient and formation overpressure led to the relatively weak diagenetic strength of the reservoirs. Specifically, the sandy conglomerates show relatively low carbonate cementation, low compaction rate and high dissolution porosity. The special stress-strain mechanism of the anticline makes the reservoirs at the top of the anticline turning point more reformed by fractures than those at the limbs, and the formation overpressure makes the fractures in open state. Moreover, the sandy conglomerates have the highest oil saturation. Typical anticline reservoirs are developed in deep part of the thrust belt, but characterized by "big trap with small reservoir". Significantly, the sandy conglomerates at the top of anticline turning point have better quality, lower in-situ stress and higher structural position than those at the limbs,with the internal hydrocarbons most enriched, making them high-yield oil/gas layers. The exponential decline of fractures makes hydrocarbon accumulation difficult in the reservoirs at the limbs. Nonetheless, plane hydrocarbon distribution is more extensive at the gentle limb than the steep limb.
基金supported by the China Geological Survey (Grant Nos. DD20160083, DD20160344-05)the Chinese Academy of Geological Sciences Research Fund (Grant No. CAGS-YWF201706)
文摘The West Junggar Orogenic Belt(WJOB)in northwestern Xinjiang,China,is located in the core of the western part of the Central Asian Orogenic Belt(CAOB).It has suffered two stage tectonic evolutions in Phanerozoic,before and after the ocean–continental conversion in Late Paleozoic.The later on intracontinental deformation,characterized by the development of the NE-trending West Junggar sinistral strike-slip fault system(WJFS)since Late Carboniferous and Early Permian,and the NW-trending Chingiz-Junggar dextral strike-slip fault(CJF)in Mesozoic and Cenozoic,has an important significance for the tectonic evolution of the WJOB and the CAOB.In this paper,we conduct geometric and kinematic analyses of the WJOB,based on field geological survey and structural interpretation of remote sensing image data.Using some piercing points such as truncated plutons and anticlines,an average magnitude of^73 km for the left-lateral strike-slip is calculated for the Darabut Fault,a major fault of the WJFS.Some partial of the displacement should be accommodated by strike-slip fault-related folds developed during the strike-slip faulting.Circular and curved faults,asymmetrical folds,and irregular contribution of ultramafic bodies,implies potential opposite vertical rotation of the Miao’ergou and the Akebasitao batholiths,resulted from the sinistral strike-slipping along the Darabut Fault.Due to conjugate shearing set of the sinistral WJFS and the dextral CJF since Early Mesozoic,superimposed folds formed with N–S convergence in southwestern part of the WJOB.
基金Supported by the China National Science and Technology Major Project(2016ZX05033002,2016ZX05033001).
文摘Taking the Paleogene salt strata in the west of Kuqa foreland thrust belt as study object, the deformation features of salt structure in the compression direction and perpendicular to the compression direction were examined to find out the control factors and formation mechanisms of the salt structures. By using the three-dimensional discrete element numerical simulation method, the formation mechanisms of typical salt structures of western Kuqa foreland thrust belt in Keshen and Dabei work areas were comprehensively analyzed. The simulation results show that the salt deformation in Keshen and Dabei work areas is of forward spread type, with deformation concentrated in the piedmont zone;the salt deformation is affected by the early uplift near the compression end, pre-existing basement faults, synsedimentary process and the initial salt depocenter;in the direction perpendicular to the compression direction, salt rocks near the compression end have strong lateral mobility with the velocity component moving towards the middle part, and the closer to the middle, the larger the velocity will be, so that salt rocks will aggregate towards the middle and deform intensely, forming complex folds and separation of salt structures from salt source, and local outcrop with thrust faults. Compared with 2 D simulation, 3 D simulation can analyze salt structures in the principal stress direction and direction perpendicular to the principal stress, give us a full view of the formation mechanisms of salt structures, and guide the exploration of oil and gas reservoirs related to salt structures.
基金Supported by the China National Science and Technology Major Project(2016ZX05003-001)PetroChina Science and Technology Project(2016E-0601,2016B-0501)
文摘The northwestern Sichuan region has experienced multi-stage tectonic evolution including marine cratonic basin from the Sinian to the Middle Triassic and intra-continental basin from the Late Triassic to the Cenozoic. Several regional tectonic activities caused complicated stratigraphic distribution and structural deformations in the deep-buried layers. During the key tectonic periods, some characteristic sedimentary and deformation structures were formed, including the step-shaped marginal carbonate platform of Dengying Formation, the western paleo-high at the end of Silurian, and the passive continental margin of the Late Paleozoic–Middle Triassic. The Meso-Cenozoic intra-continental compressional tectonic processes since the Late Triassic controlled the formation of complex thrusting structures surrounding and inside the northwestern basin. The northern Longmenshan fold-thrust belt has a footwall in-situ thrust structure,which is controlled by two sets of detachments in the Lower Triassic and Lower Cambrian and presents as a multi-level deformation structure with the shallow folds, the middle thin-skin thrusts and the deeper basement-involved folds. The thrust belt in front of the Micangshan Mountain shows a double-layer deformation controlled by the Lower Triassic salt detachment, which is composed by the upper monocline and deep-buried imbricate thrust structures. The interior of the basin is characterized by several rows of large-scale basement-involved folds with NEE strike direction. From the perspective of structural geology, the favorable exploration reservoirs and belts in northwestern Sichuan have obvious zoning characteristics. The favorable exploration layers of Dengying Formation of Upper Sinian are mainly distributed in the eastern and northern areas of the northwestern Sichuan Basin, in which the Jiulongshan structural belt, Zitong syncline and Yanting slope are the most favorable. The Lower Paleozoic was transformed by Caledonian paleo-uplift and late Cenozoic folding, and the midwest area such as the Zitong syncline is a potential area for hydrocarbon exploration. The favorable part of the Upper Paleozoic is mainly distributed in the northern Longmenshan belt and its frontal area, where the deep-buried thin-skin thrust structures in the footwall are the key exploration targets.
基金Supported by the China National Science and Technology Major Project(2016ZX05007-003)the National Natural Science Foundation of China(41802138)
文摘Well Zhongqiu 1 obtained highly productive oil-gas stream in the footwall of Zhongqiu structure, marking the strategic breakthrough of Qiulitag structural belt in the Tarim Basin. However, the oil and gas sources in Zhongqiu structural belt and the reservoir formation process in Zhongqiu 1 trap remain unclear, so study on these issues may provide important basis for the next step of oil and gas exploration and deployment in Qiulitage structural belt. In this study, a systematic correlation of oil and gas source in Well Zhongqiu 1 has been carried out. The oil in Well Zhongqiu 1 is derived from Triassic lacustrine mudstone, while the gas is a typical coal-derived gas and mainly from Jurassic coal measures. The oil charging in Well Zhongqiu 1 mainly took place during the sedimentary period from Jidike Formation to Kangcun Formation in Neogene, and the oil was mainly contributed by Triassic source rock;large-scale natural gas charging occurred in the sedimentary period of Kuqa Formation in Neogene, and the coal-derived gas generated in the late Jurassic caused large-scale gas invasion to the early Triassic crude oil reservoirs. The Zhongqiu 1 trap was formed earlier than or at the same period as the hydrocarbon generation and expulsion period of Triassic-Jurassic source rocks. Active faults provided paths for hydrocarbon migration. The source rocks-faults-traps matched well in time and space. Traps in the footwall of the Zhongqiu structural fault have similar reservoir-forming conditions with the Zhongqiu 1 trap, so they are favorable targets in the next step of exploration.
文摘Abstract The nearly E-W-trending Aqqikkudug-Weiya zone, more than 1000 km long and about 30 km wide, is an important segment in the Central Asian tectonic framework. It is distributed along the northern margin of the Central Tianshan belt in Xinjiang, NW China and is composed of mylonitized Early Palaeozoic greywacke, volcanic rocks, ophiolitic blocks as a mélange complex, HP/LT-type bleuschist blocks and mylonitized Neoproterozoic schist, gneiss and orthogneiss. Nearly vertical mylonitic foliation and sub-horizontal stretching lineation define its strike-slip feature; various kinematic indicators, such as asymmetric folds, non-coaxial asymmetric macro- to micro-structures and C-axis fabrics of quartz grains of mylonites, suggest that it is a dextral strike-slip ductile shear zone oriented in a nearly E-W direction characterized by “flower” strusture with thrusting or extruding across the zone toward the two sides and upright folds with gently plunging hinges. The Aqqikkudug-Weiya zone experienced at least two stages of ductile shear tectonic evolution: Early Palaeozoic north vergent thrusting ductile shear and Late Carboniferous-Early Permian strike-slip deformation. The strike-slip ductile shear likely took place during Late Palaeozoic time, dated at 269±5 Ma by the40Ar/39Ar analysis on neo-muscovites. The strike-slip deformation was followed by the Hercynian violent S-type granitic magmatism. Geodynamical analysis suggests that the large-scale dextral strike-slip ductile shearing is likely the result of intracontinental adjustment deformation after the collision of the Siberian continental plate towards the northern margin of the Tarim continental plate during the Late Carboniferous. The Himalayan tectonism locally deformed the zone, marked by final uplift, brittle layer-slip and step-type thrust faults, transcurrent faults and E-W-elongated Mesozoic-Cenozoic basins.
基金This research received financial supports from the National Natural Science Foundation of China(grant 40172076)the National Major Fundamental Research and Development Project(grant G1999043305)the National Key Project of the Ninth Five—Year Plan(grant 99—1111)
文摘The tectono-stratigraphic sequences of the Kuqa foreland fold-thrust belt in the northern Tarim basin, northwest China, can be divided into the Mesozoic sub-salt sequence, the Paleocene-Eocene salt sequence and the Oligocene-Quaternary supra-salt sequence. The salt sequence is composed mainly of light grey halite, gypsum, marl and brown elastics. A variety of salt-related structures have developed in the Kuqa foreland fold belt, in which the most fascinating structures are salt nappe complex. Based on field observation, seismic interpretation and drilling data, a large-scale salt nappe complex has been identified. It trends approximately east-west for over 200 km and occurs along the west Qiulitag Mountains. Its thrusting displacement is over 30 km. The salt nappe complex appears as an arcuate zone projecting southwestwards along the leading edge of the Kuqa foreland fold belt. The major thrust fault is developed along the Paleocene-Eocene salt beds. The allochthonous nappes comprise large north-dipping faulting monoclines which are made up of Paleocene-Pliocene sediments. Geological analysis and cross-section restoration revealed that the salt nappes were mainly formed at the late Himalayan stage (c.a. 1.64 Ma BP) and have been active until the present day. Because of inhomogeneous thrusting, a great difference may exist in thrust displacement, thrust occurrence, superimposition of allochthonous and autochthonous sequences and the development of the salt-related structures, which indicates the segmentation along the salt nappes. Regional compression, gravitational gliding and spreading controlled the formation and evolution of the salt nappe complex in the Kuqa foreland fold belt.
文摘Recent discoveries of ophiolites indicate that there must be a Palaeotethyan geosuture zone bordering China and Vietnam, which separates the Vietbac block from the South China subcontinent. The Indosinian foreland fold-and-thrust belt bordering Yunnan and Guangxi provided further evidence for the palaeotethysides. The oceanic crust was subducted southwestwards while the magmatic arc migrated northeastwards, and the continent-arc collision occurred in the Late Triassic with the thrusting being extended towards the north or northeast. The features of thrust-nappe structure are discussed, which proved the continental margin of the Palaeotethyan ocean there to be a complicated one. A face-to-face collision occurred first along the NW-striking segment and then along the ENE-striking segment accompanied by transpression or oblique thrusting occurring along the NW-striking one.
基金financially supported by the National Natural Science Foundation of China(No.40972091)
文摘According to the differences of structural deformation characteristics, the southern margin of the Junggar basin can be divided into two segments from east to west. Arcnate thrust-and-fold belts that protrude to the north are developed in the eastern segment. There are three rows of en echelon thrust-and-fold belts in the western segment. Thrust and fold structures of basement-involved styles are developed in the first row, and decollement fold structures are formed from the second row to the third row. In order to study the factors controlling the deformation of structures, sand-box experiments have been devised to simulate the evolution of plane and profile deformation. The planar simulation results indicate that the orthogonal compression coming from Bogeda Mountain and the oblique compression with an angle of 75° between the stress and the boundary originating from North Tianshan were responsible for the deformation differences between the eastern part and the western part. The Miquan-Uriimqi fault in the basement is the pre-existing condition for generating fragments from east to west. The profile simulation results show that the main factors controlling the deformation in the eastern part are related to the decollement of Jurassic coal beds alone, while those controlling the deformation in the western segment are related to both the Jurassic coal beds and the Eogene clay beds. The total amount of shortening from the Yaomoshan anticline to the Gumudi anticline in the eastern part is -19.57 km as estimated from the simulation results, and the shortening rate is about 36.46%; that from the Qingshuihe anticline to the Anjihai anticline in the western part is -22.01 km as estimated by the simulation results, with a shortening rate of about 32.48%. These estimated values obtained from the model results are very close to the values calculated by means of the balanced cross section.
基金supported by the National Natural Sci-ence Foundation of China (Nos. 40472107, 40172076)the Major Fundamental Research and Development Project (No. 2005CB422107)+1 种基金the Open Project of Key Laboratory for Hy-drocarbon Accumulation Mechanism (No. 2003-03)the Project of Southwest Division Company, SINOPEC (No. GJ-51-0602)
文摘Through field geological investigation and seismic interpretation of the Longmen (龙门) Mountain thrust belt, we summarized the following structural styles: thrust belt, fault-related fold (fault bend fold, fault propagation fold, and fault decollement fold), pop-up, triangle zone, duplex, superimposed fold, ductile deformation structures, reverse thrust fault, klippe, decollement structure,etc.. These structural styles have evident distribution characteristics; they had zonation and segmentation in plane. The zonation presents as the thrust nappe tectonic zone to the west of Tongjichang (通济场) fault, fault-related folds between Tongjichang fault and Guankou (关口) fault, and low and mild folds to the east of Guankou fault. The segmentation is evidenced as the scale of reverse thrust faults was minor between Tongjichang No. 1 fault and Tongjichang No. 2 fault. The distance between these two faults became long in the Daynanbao (大园包) structure, and there developed typical fault propagation fold and pop-up between these two faults. Furthermore, the structures had stratifi-cation in profile. The salt layer of T21 provided good conditions for the formation and development of large listric thrust faults; the thrust fault slipped in the salt layer and formed decollement structures and fault-related fold. At the same time, there formed duplex and reverse thrust faults between the two decollement layers.
文摘The west Kunlun fold-thrust belt (WKFTB) and the Altun fold-thrust belt (AFTB) are respectively located in the southern margin of the Tarim basin, NW China. The analyses of typical structures and regional dynamics of the fold-thrust belts reveal their different structural and pe-troleum features and mechanisms. WKFTB differs from AFTB by abundant fault-related folds and triangles zones, and was formed by northward extrusion of the west Kunlun orogen. AFTB was affected synchronously by northward extrusion of the Altun orogen and the sinistral strike-slipping of the Altun Fault, so it is characterized by the minor scale and the monotonous structural styles. The Aqike anticline and the Aqike fault, of which the strikes are orthogonal to the strike of the fold-thrust belts, are regarded as the adjustive structures between both of the fold-thrust belts. The oil-gas pools of WKFTB develop mainly in the faulted-related anticline traps, but the oil-gas pools of AFTB develop mainly in the low fault-block and anticlines traps related with the pa-leo-uplifts. There are different exploration countermeasures for both of the fold-thrust belts.