The effects of dissolved organic matter （DOM） on the removal of nitrate-nitrogen from the model contaminated water have been investigated utilizing the strong base anion exchange resins. With the increase of gallic ...The effects of dissolved organic matter （DOM） on the removal of nitrate-nitrogen from the model contaminated water have been investigated utilizing the strong base anion exchange resins. With the increase of gallic acid concentration from 0 to 400 mg/L, the adsorption amount of nitrate-nitrogen on the commercial resins, including D201, Purolite A 300 （A300） and Purolite A 520E （A520E）, would significantly decrease. However, the presence of tannin acid has little impact on nitrate-nitrogen adsorption on them. Compared to D201 and A300 resins, A520E resin exhibited more preferable adsorption ability toward nitrate-nitrogen in the presence of competing organic molecules, such as gallic acid and tannin acid at greater levels in aqueous solution. Attractively, the equilibrium data showed that the adsorption isotherm of nitrate-nitrogen on A520E resin was in good agreement with Langmuir and Fretmdlich equations. The rate parameters for the intra particle diffusion have been estimated for the different initial concentrations. In batch adsorption processes, nitrate-nitrogen diffuse in porous adsorbent and rate process usually depends on t1/2 rather than the contact time. The pseudo first- and the second-order kinetic models fit better for nitrate-nitrogen adsorption onto A520E resin. The observations reported herein illustrated that A520E resin will be an excellent adsorbent for enhanced removal of nitrate-nitrogen from contaminated groundwater.展开更多
A fibrous strong base anion exchanger （QAPPS） was prepared for the first time via chloromethylation and quaternary amination reaction of polyphenylene sulfide fiber （PPS）, and its physical-chemical structure and a...A fibrous strong base anion exchanger （QAPPS） was prepared for the first time via chloromethylation and quaternary amination reaction of polyphenylene sulfide fiber （PPS）, and its physical-chemical structure and adsorption behavior for Cr（VI） were characterized by FT- IR, Energy Dispersive Spectrometry, TG-DTG, elemental analysis and batch adsorptive technique, respectively. The novel fibrous adsorbent could effectively adsorb Cr（VI） over the pH range 1-12, the maximum adsorption capacity was 166.39 mg/g at pH 3.5, and the adsorption behavior could be described well by Langmuir isotherm equation model. The adsorption kinetics was studied using pseudo first-order and pseudo second-order models, and the 4/2 and equilibrium adsorption time were 5 and 20 min respectively when initial Cr（VI） concentration was 100 mg/L. The saturated fibers could be regenerated rapidly by a mixed solution of 0.5 mol/L NaOH and 0.5 mol/L NaCl, and the adsorption capacity was well maintained after six adsorption-desorption cycles.展开更多
研究了采用ZGA351大孔强碱性阴离子交换树脂从粗钨酸铵溶液中吸附分离钼的工艺方法,考察了树脂型号、料液硫含量、料液陈化时间、料液陈化温度、料液pH值、吸附流速、吸附温度对树脂吸附分离钼效果的影响。结果表明:使用100 mL ZGA351...研究了采用ZGA351大孔强碱性阴离子交换树脂从粗钨酸铵溶液中吸附分离钼的工艺方法,考察了树脂型号、料液硫含量、料液陈化时间、料液陈化温度、料液pH值、吸附流速、吸附温度对树脂吸附分离钼效果的影响。结果表明:使用100 mL ZGA351树脂进行动态吸附试验,在料液硫含量为理论量1.1倍、料液陈化时间48 h、料液陈化温度40℃、料液pH值10.0、吸附流速15 mL/h、吸附温度40℃的最优条件下,料液钨损失率仅为0.54%,树脂钼穿透容量为107.77 g/L_(湿树脂),相比目前工业生产应用的HBDM-1树脂钼穿透容量提高了3.15倍。另外,重复试验稳定性良好,ZGA351树脂吸附后得到的纯钨酸铵溶液平均钼钨比为0.88×10^(-4),满足工业生产APT产品用纯钨酸铵溶液钼钨比小于2×10^(-4)的需求。综合而言,采用强碱性阴离子交换树脂从粗钨酸铵溶液中分离钼具有钼穿透容量高、钨损失率低、钨钼分离效率高等优势,为工业化应用提供了一种有效技术参考。展开更多
基金supported by the Program for Changjiang Scholars Innovative Research Team in University and NS-FC (No.50938004,51178215,51008152)the Jiangsu Nature Science Foundation for Distinguished Scientists(No.BK2010006, BK2011032)the Scientific Research Starting Found for Postdoctors,Nanjing University(No.0211003046, 021114340069)
文摘The effects of dissolved organic matter （DOM） on the removal of nitrate-nitrogen from the model contaminated water have been investigated utilizing the strong base anion exchange resins. With the increase of gallic acid concentration from 0 to 400 mg/L, the adsorption amount of nitrate-nitrogen on the commercial resins, including D201, Purolite A 300 （A300） and Purolite A 520E （A520E）, would significantly decrease. However, the presence of tannin acid has little impact on nitrate-nitrogen adsorption on them. Compared to D201 and A300 resins, A520E resin exhibited more preferable adsorption ability toward nitrate-nitrogen in the presence of competing organic molecules, such as gallic acid and tannin acid at greater levels in aqueous solution. Attractively, the equilibrium data showed that the adsorption isotherm of nitrate-nitrogen on A520E resin was in good agreement with Langmuir and Fretmdlich equations. The rate parameters for the intra particle diffusion have been estimated for the different initial concentrations. In batch adsorption processes, nitrate-nitrogen diffuse in porous adsorbent and rate process usually depends on t1/2 rather than the contact time. The pseudo first- and the second-order kinetic models fit better for nitrate-nitrogen adsorption onto A520E resin. The observations reported herein illustrated that A520E resin will be an excellent adsorbent for enhanced removal of nitrate-nitrogen from contaminated groundwater.
基金support of the National Natural Science Foundation of China (No. 20574063,21004055)
文摘A fibrous strong base anion exchanger （QAPPS） was prepared for the first time via chloromethylation and quaternary amination reaction of polyphenylene sulfide fiber （PPS）, and its physical-chemical structure and adsorption behavior for Cr（VI） were characterized by FT- IR, Energy Dispersive Spectrometry, TG-DTG, elemental analysis and batch adsorptive technique, respectively. The novel fibrous adsorbent could effectively adsorb Cr（VI） over the pH range 1-12, the maximum adsorption capacity was 166.39 mg/g at pH 3.5, and the adsorption behavior could be described well by Langmuir isotherm equation model. The adsorption kinetics was studied using pseudo first-order and pseudo second-order models, and the 4/2 and equilibrium adsorption time were 5 and 20 min respectively when initial Cr（VI） concentration was 100 mg/L. The saturated fibers could be regenerated rapidly by a mixed solution of 0.5 mol/L NaOH and 0.5 mol/L NaCl, and the adsorption capacity was well maintained after six adsorption-desorption cycles.
