The effect of cooling rate after 40% hot deformation on structure and mechanical properties of low alloy wear resistance cast iron was investigated by metallographic, scanning electron microscopes and detection of pro...The effect of cooling rate after 40% hot deformation on structure and mechanical properties of low alloy wear resistance cast iron was investigated by metallographic, scanning electron microscopes and detection of properties. The results show that for the cast steel after deformed, the amount of granular carbides of precipitation during the cooling decreased with the increase of the cooling rate, but the hardness was obviously enhanced, as a result, better mechanical properties will be obtained by force air cooling(cooling rate is about 7 ℃·s-1). And the reason of the change for structure and mechanical properties of the cast steel were analyzed.展开更多
This paper deals with the characteristics of silicon modification with lanthanum of Al-Si eutectic alloy in sand mold and metal mold with optical microscopy,scanning electron microscopy,electron microprobe and X-ray d...This paper deals with the characteristics of silicon modification with lanthanum of Al-Si eutectic alloy in sand mold and metal mold with optical microscopy,scanning electron microscopy,electron microprobe and X-ray diffractometer.It is found that the amount of lanthanum,liquid alloy condition,holding time and stir- ring liquid influence the modification of silicon.The modification of silicon with lanthanum is of long effectiveness and has a“incubation time”.The modification can improve the ductility(δ_s)and tensile strength (σ_b)of the alloy,but their maximum values are not corresponding to the same amount of lanthanum.展开更多
文摘The effect of cooling rate after 40% hot deformation on structure and mechanical properties of low alloy wear resistance cast iron was investigated by metallographic, scanning electron microscopes and detection of properties. The results show that for the cast steel after deformed, the amount of granular carbides of precipitation during the cooling decreased with the increase of the cooling rate, but the hardness was obviously enhanced, as a result, better mechanical properties will be obtained by force air cooling(cooling rate is about 7 ℃·s-1). And the reason of the change for structure and mechanical properties of the cast steel were analyzed.
文摘This paper deals with the characteristics of silicon modification with lanthanum of Al-Si eutectic alloy in sand mold and metal mold with optical microscopy,scanning electron microscopy,electron microprobe and X-ray diffractometer.It is found that the amount of lanthanum,liquid alloy condition,holding time and stir- ring liquid influence the modification of silicon.The modification of silicon with lanthanum is of long effectiveness and has a“incubation time”.The modification can improve the ductility(δ_s)and tensile strength (σ_b)of the alloy,but their maximum values are not corresponding to the same amount of lanthanum.
