Differences of Hydrocarbon Enrichment between the Upper and the Lower Structural Layers in the Tazhong Paleouplift

The Tazhong paleouplift is divided into the upper and the lower structural layers, bounded by the unconformity surface at the top of the Ordovician carbonate rock. The reservoirs in the two layers from different parts vary in number, type and reserves, but the mechanism was rarely researched before. Therefore, an explanation of the mechanism will promote petroleum exploration in Tazhong paleouplift. After studying the evolution and reservoir distribution of the Tazhong paleouplift, it is concluded that the evolution in late Caledonian, late Hercynian and Himalayan periods resulted in the upper and the lower structural layers. It is also defined that in the upper structural layer, structural and stratigraphic overlap reservoirs are developed at the top and the upper part of the paleouplift, which are dominated by oil reservoirs, while for the lower structural layer, lithological reservoirs are developed in the lower part of the paleouplift, which are dominated by gas reservoirs, and more reserves are discovered in the lower structural layer than the upper. Through a comparative analysis of accumulation conditions of the upper and the lower structural layers, the mechanism of enrichment differences is clearly explained. The reservoir and seal conditions of the lower structural layer are better than those of the upper layer, which is the reason why more reservoirs have been found in the former. The differences in the carrier system types, trap types and charging periods between the upper and the lower structural layers lead to differences in the reservoir types and distribution. An accumulation model is established for the Tazhong paleouplift. For the upper structural layer, the structural reservoirs and the stratigraphic overlap reservoirs are formed at the upper part of the paleouplift, while for the lower structural layer, the weathering crust reservoirs are formed at the top, the reef-flat reservoirs are formed on the lateral margin, the karst and inside reservoirs are formed in the lower part of the paleouplift.

A STUDY OF THE STRUCTURAL LAYERS OF COUPLING AGENTS AND THE MICROSCOPIC RHEOLOGY IN THE INTERFACES OF GF/UP SYSTEMS

The coupling agents content and thickness on glass fiber (GF) surfaces which have been treated with silanes and titanates under different conditions are tested by means of XRF (X-Ray Fluorescent spectrometry). And the rheological characteristics of the dispersed systems prepared from the above glass fibers combined with unsaturated polyester resin (UP) are discussed. The results show that the rigidity of the internal layers of silane coupling agent absorbed by glass surfaces is greater than the one of the external layers; while the effect of the titanate coupling agents on the rheolo- gical characteristics of the system is approximately the same in each structural layer, that is due to the fact that both the internal and external layers of titanates on glass surfaces have the similar flexible structures.

Layered Structural PBAT Composite Foams for Efficient Electromagnetic Interference Shielding

The utilization of eco-friendly,lightweight,high-efficiency and high-absorbing electromagnetic interference(EMI)shielding composites is imperative in light of the worldwide promotion of sustainable manufacturing.In this work,magnetic poly(butyleneadipate-coterephthalate)(PBAT)microspheres were firstly synthesized via phase separation method,then PBAT composite foams with layered structure was constructed through the supercritical carbon dioxide foaming and scraping techniques.The merits of integrating ferroferric oxideloaded multi-walled carbon nanotubes(Fe3O4@MWCNTs)nanoparticles,a microcellular framework,and a highly conductive silver layer have been judiciously orchestrated within this distinctive layered configuration.Microwaves are consumed throughout the process of“absorption-reflection-reabsorption”as much as possible,which greatly declines the secondary radiation pollution.The biodegradable PBAT composite foams achieved an EMI shielding effectiveness of up to 68 dB and an absorptivity of 77%,and authenticated favorable stabilization after the tape adhesion experiment.

Reversible Mn^(2+)/Mn^(4+)double-electron redox in P3-type layer-structured sodium-ion cathode

The balance between cationic redox and oxygen redox in layer-structured cathode materials is an important issue for sodium batteries to obtain high energy density and considerable cycle stability.Oxygen redox can contribute extra capacity to increase energy density,but results in lattice instability and capacity fading caused by lattice oxygen gliding and oxygen release.In this work,reversible Mn^(2+)/Mn^(4+)redox is realized in a P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)cathode material with high specific capacity and structure stability via Co substitution.The contribution of oxygen redox is suppressed significantly by reversible Mn^(2+)/Mn^(4+)redox without sacrificing capacity,thus reducing lattice oxygen release and improving the structure stability.Synchrotron X-ray techniques reveal that P3 phase is well maintained in a wide voltage window of 1.5-4.5 V vs.Na^(+)/Na even at 10 C and after long-term cycling.It is disclosed that charge compensation from Co/Mn-ions contributes to the voltage region below 4.2 V and O-ions contribute to the whole voltage range.The synergistic contributions of Mn^(2+)/Mn^(4+),Co^(2+)/Co^(3+),and O^(2-)/(O_n)^(2-)redox in P3-Na_(0.65)Li_(0.2)Co_(0.05)Mn_(0.75)O_(2)lead to a high reversible capacity of 215.0 m A h g^(-1)at 0.1 C with considerable cycle stability.The strategy opens up new opportunities for the design of high capacity cathode materials for rechargeable batteries.

In-situ additive manufacturing of high strength yet ductility titanium composites with gradient layered structure using N_(2)

It has always been challenging work to reconcile the contradiction between the strength and plasticity of titanium materials.Laser powder bed fusion(LPBF) is a convenient method to fabricate innovative composites including those inspired by gradient layered materials.In this work,we used LPBF to selectively prepare Ti N/Ti gradient layered structure(GLSTi)composites by using different N_(2)–Ar ratios during the LPBF process.We systematically investigated the mechanisms of in-situ synthesis Ti N,high strength and ductility of GLSTi composites using microscopic analysis,TEM characterization,and tensile testing with digital image correlation.Besides,a digital correspondence was established between the N_(2) concentration and the volume fraction of LPBF in-situ synthesized Ti N.Our results show that the GLSTi composites exhibit superior mechanical properties compared to pure titanium fabricated by LPBF under pure Ar.Specifically,the tensile strength of GLSTi was more than 1.5times higher than that of LPBF-formed pure titanium,reaching up to 1100 MPa,while maintaining a high elongation at fracture of 17%.GLSTi breaks the bottleneck of high strength but low ductility exhibited by conventional nanoceramic particle-strengthened titanium matrix composites,and the hetero-deformation induced strengthening effect formed by the Ti N/Ti layered structure explained its strength-plasticity balanced principle.The microhardness exhibits a jagged variation of the relatively low hardness of 245 HV0.2 for the pure titanium layer and a high hardness of 408 HV0.2 for the N_(2) in-situ synthesis layer.Our study provides a new concept for the structure-performance digital customization of 3D-printed Ti-based composites.

Difficulties, strategies, and recent research and development of layered sodium transition metal oxide cathode materials for high-energy sodium-ion batteries

Energy-storage systems and their production have attracted significant interest for practical applications.Batteries are the foundation of sustainable energy sources for electric vehicles(EVs),portable electronic devices(PEDs),etc.In recent decades,Lithium-ion batteries(LIBs) have been extensively utilized in largescale energy storage devices owing to their long cycle life and high energy density.However,the high cost and limited availability of Li are the two main obstacles for LIBs.In this regard,sodium-ion batteries(SIBs) are attractive alternatives to LIBs for large-scale energy storage systems because of the abundance and low cost of sodium materials.Cathode is one of the most important components in the battery,which limits cost and performance of a battery.Among the classified cathode structures,layered structure materials have attracted attention because of their high ionic conductivity,fast diffusion rate,and high specific capacity.Here,we present a comprehensive review of the classification of layered structures and the preparation of layered materials.Furthermore,the review article discusses extensively about the issues of the layered materials,namely(1) electrochemical degradation,(2) irreversible structural changes,and(3) structural instability,and also it provides strategies to overcome the issues such as elemental phase composition,a small amount of elemental doping,structural design,and surface alteration for emerging SIBs.In addition,the article discusses about the recent research development on layered unary,binary,ternary,quaternary,quinary,and senary-based O3-and P2-type cathode materials for high-energy SIBs.This review article provides useful information for the development of high-energy layered sodium transition metal oxide P2 and O3-cathode materials for practical SIBs.

Charge Density Wave States and Structural Transition in Layered Chalcogenide TaSe_(2-x)Te_x

The structural features and three-dimensional nature of the charge density wave （CDW） state of the layered chalcogenide 1T-TaSe2-xTex （0≤x≤2.0） are characterized by Cs-corrected transmission electron microscopy measurements. Notable changes of both average structure and the CDW state arising from Te substitution for Se are clearly demonstrated in samples with x〉0.3. The commensurate CDW state characterized by the known star-of-David clustering in the 1T-TaSe2 crystal becomes visibly unstable with Te substitution and vanishes when x=0.3. The 1T-TaSe2-xTex （0.3≤x≤1.3） samples generally adopt a remarkable incommensurate CDW state with monoclinic distortion, which could be fundamentally in correlation with the strong qq-dependent electron-phonon coupling-induced period-lattice-distortion as identified in TaTe22. Systematic analysis demonstrates that the occurrence of superconductivity is related to the suppression of the commensurate CDW phase and the presence of discommensuration is an evident structural feature observed in the superconducting samples.

Numerical simulations of compressible mixing layers with a discontinuous Galerkin method

Discontinuous Galerkin（DG） method is known to have several advantages for flow simulations,in particular,in fiexible accuracy management and adaptability to mesh refinement. In the present work,the DG method is developed for numerical simulations of both temporally and spatially developing mixing layers. For the temporally developing mixing layer,both the instantaneous fiow field and time evolution of momentum thickness agree very well with the previous results. Shocklets are observed at higher convective Mach numbers and the vortex paring manner is changed for high compressibility. For the spatially developing mixing layer,large-scale coherent structures and self-similar behavior for mean profiles are investigated. The instantaneous fiow field for a three-dimensional compressible mixing layer is also reported,which shows the development of largescale coherent structures in the streamwise direction. All numerical results suggest that the DG method is effective in performing accurate numerical simulations for compressible shear fiows.

THE EFFECTS OF VELOCITY RATIO ON THE LARGE SCALE COHERENT STRUCTURES IN FREE SHEAR LAYERS

The velocity ratio of a free shear layer has an important influence on the spatial development of the large scale coherent structures in the layer. In this study, numerical simulations are performed to get an insight into this problem. The obtained numerical results agree quite well with those of a linear inviscid stability theory and the available experimental data.

DISCRETE SINGULAR CONVOLUTION METHOD WITH PERFECTLY MATCHED ABSORBING LAYERS FOR THE WAVE SCATTERING BY PERIODIC STRUCTURES

A new computational algorithm is introduced for solving scattering problem in periodic structure. The PML technique is used to deal with the difficulty on truncating the unbounded domain while the DSC algorithm is utilized for the spatial discretization. The present study reveals that the method is efficient for solving the problem.

Nacre-inspired interface structure design of polymer bonded explosives toward significantly enhanced mechanical performance

Realizing effective enhancement to the structure of interface region between explosive crystals and polymer binder plays a key role in improving the mechanical properties of the current polymer bonded explosives(PBXs).Herein,inspired by the structure of natural nacre which possesses outstanding mechanical performance,a kind of nacre-like structural layer is constructed in the interface region of PBXs composites,making use of two-dimensional graphene sheets and one-dimensional bio-macromolecules of cellulose as inorganic and organic building blocks,respectively.Our results reveal that the constructed nacre-like structural layer can effectively improve the interfacial strength and then endow the PBXs composites with significantly enhanced mechanical properties involving of creep resistance,Brazilian strength and fracture toughness,demonstrating the obvious advantage of such bioinspired interface structure design strategy.In addition,the thermal conduction performance of PBXs composites also exhibits noticeable enhancement due to the remarkable phonon transport capability endowed by the asdesigned nacre-like structural layer.We believe this work provides a novel design route to conquer the issue of weak interfacial strength in PBXs composites and greatly increase the comprehensive properties for better meeting the higher requirements proposed to the explosive part of weapon equipment in new era.

Crystal growth of CeMn_(0.85)Sb_(2):Absence of magnetic order of Ce-sublattice

Single crystals of CeMn_(0.85)Sb_(2) have been successfully synthesized by using the Bi as flux.Analysis of single crystal x-ray diffraction data confirms that CeMn_(0.85)Sb_(2) crystallizes in the HfCuSi_(2)-type structure with the space group P4/nmm(No.129).In the case of H‖c,CeMn_(0.85)Sb_(2) displays a robust antiferromagnetic transition at~160 K for Mn-sublattice,and there is no sign of magnetic order regarding Ce-sublattice.In the case of the Mn-sublattice shows signs of magnetic order at 160 K and 116 K,indicating a possible spin reorientation.There is no sign of magnetic order for the Cesublattice either,but,alternating current magnetic susceptibility measurements reveal a spin glass state below 18 K in the case of H⊥c.Isothermal magnetization curves measured below magnetic order with H⊥c show saturation and even large hysteresis at 2 K,indicating the presence of a ferromagnetic component.In addition,a field-induced spin-flop transition is observed in the case of H⊥c,indicating a field-induced spin reorientation of Mn spins.Electrical resistivity measurements indicate a metallic nature for CeMn_(0.85)Sb_(2) and large anisotropy which is consistent with its quasi-two-dimensional layered structure.

Evolution of Meteorological Conditions during a Heavy Air Pollution Event under the Influence of Shallow Foehn in Urumqi, China

The air pollution in Urumqi which is located on the northern slope of the Tianshan Mountains in northwestern China,is very serious in winter.Of particular importance is the influence of terrain-induced shallow foehn,known locally as elevated southeasterly gale(ESEG).It usually modulates atmospheric boundary layer structure and wind field patterns and produces favorable meteorological conditions conducive to hazardous air pollution.During 2013-17,Urumqi had an average of 50 d yr-1 of heavy pollution(daily average PM2.5 concentration>150μg m-3),of which 41 days were in winter.The majority(71.4%)of heavy pollution processes were associated with the shallow foehn.Based on microwave radiometer,wind profiler,and surface observations,the surface meteorological fields and boundary layer evolution during the worst pollution episode in Urumqi during 16-23 February 2013 are investigated.The results illustrate the significant role of shallow foehn in the building,strengthening,and collapsing of temperature inversions.There were four wind field patterns corresponding to four different phases during the whole pollution event.The most serious pollution phase featured shallow foehn activity in the south of Urumqi city and the appearance of an intense inversion layer below 600 m.Intense convergence caused by foehn and mountain-valley winds was sustained during most of the phase,resulting in pollutants sinking downward to the lower boundary layer and accumulating around urban area.The key indicators of such events identified in this study are highly correlated to particulate matter concentrations and could be used to predict heavy pollution episodes in the feature.

Investigation on the properties of compacted silty clay subjected to electro-osmosis using bender element

The moisture content of subgrade soil in seasonally frozen regions is often higher than its optimum value,leading to a decline in mechanical properties and a reduction in subgrade bearing capacity.Electro-osmosis has shown promise as a technology for controlling subgrade moisture,but significant heterogeneity has also been observed in treated soil.This study investigates the impact of electro-osmosis on soil stiffness through a series of bender element tests of compacted clay.The effects of dry density and supply voltage on the performance of electroosmosis treatment and the layered structure and anisotropy of the soil were analyzed.The results show that electro-osmosis treatment increased the shear wave velocity of the soil by 140% compared to untreated saturated soil and by 70% compared to soil with optimum water content.It has also been found that layered compaction of soil resulted in a layered structure,with electro-osmosis having a more prominent impact on soil near the cathode,resulting in a more pronounced layered structure.Besides,electro-osmosis was found to enhance soil anisotropy,particularly near the anode.Increasing the dry density and voltage levels can help improve soil uniformity.These findings provide insights into the potential use of electro-osmosis in improving soil stiffness,which could benefit various engineering applications.

Layer stacked SiO_(x) microparticle with disconnected interstices enables stable interphase and particle integrity for lithium-ion batteries

Severe mechanical fractu re and unstable interphase,associated with the large volumetric expansion/contraction,significantly hinder the application of high-capacity SiO_(x)materials in lithium-ion batteries.Herein,we report the design and facile synthesis of a layer stacked SiO_(x)microparticle(LS-SiO_(x))material,which presents a stacking structure of SiO_(x)layers with abundant disconnected interstices.This LS-SiO_(x)microparticle can effectively accommodate the volume expansion,while ensuring negligible particle expansion.More importantly,the interstices within SiO_(x)microparticle are disconnected from each other,which efficiently prevent the electrolyte from infiltration into the interior,achieving stable electrode/-electrolyte interface.Accordingly,the LS-SiO_(x)material without any coating delivers ultrahigh average Coulombic efficiency,outstanding cycling stability,and full-cell applicability.Only 6 cycles can attain>99.92%Coulombic efficiency and the capacity retention at 0.05 A g^(-1)for 100 cycles exceeds99%.After 800 cycles at 1 A g^(-1),the thickness swelling of LS-SiO_(x)electrode is as low as 0.87%.Moreover,the full cell with pure LS-SiO_(x)anode exhibits capacity retention of 91.2%after 300 cycles at 0.2 C.This work provides a novel concept and effective approach to rationally design silicon-based and other electrode materials with huge volume variation for electrochemical energy storage applications.

High-Throughput Growth of Hexagonal Boron Nitride Film Using Porous-Structure Isolation Layer

Chemical vapor deposition is considered as the most hopeful method for the synthesis of large-area high-quality hexagonal boron nitride on the substrate of catalytic metal. However, the size the hexagonal boron nitride films are limited to the size of growth chamber, which indicates a lower production efficiency. In this paper, the utilization efficiency of growth chamber is highly improved by alternately stacking multiple pieces of Cu foils and carbon fiber surface felt with porous structure. Uniform and continuous hexagonal boron nitride films are prepared on Cu foils through chemical vapor deposition utilizing ammonia borane as the precursor. This work develops a simple and practicable method for high-throughput preparation of hexagonal boron nitride films, which could contribute to the industrial application of hexagonal boron nitride. .

Characteristics of the Boundary Layer Structure of Sea Fog on the Coast of Southern China

Using boundary layer data with regard to sea fog observed at the Science Experiment Base for Marine Meteorology at Bohe,Guangdong Province,the structure of the atmospheric boundary layer and the characteristics of the tops of the fog and the clouds were analyzed.In addition,the effects of advection,radiation,and turbulence during sea fog were also investigated.According to the stability definition of saturated,wet air,the gradient of the potential pseudo-equivalent temperature equal to zero was defined as the thermal turbulence interface.There is evidence to suggest that two layers of turbulence exist in sea fog.Thermal turbulence produced by long-wave radiation is prevalent above the thermal turbulence interface,whereas mechanical turbulence aroused by wind shear is predominant below the interface.The height of the thermal turbulence interface was observed between 180 m and 380 m.Three important factors are closely related to the development of the top of the sea fog：（1） the horizontal advection of the water vapor,（2） the long-wave radiation of the fog top,and（3） the movement of the vertical turbulence.Formation,development,and dissipation are the three possible phases of the evolution of the boundary-layer structure during the sea fog season.In addition,the thermal turbulence interface is the most significant turbulence interface during the formation and development periods;it is maintained after sea fog rises into the stratus layer.

Wave localization in randomly disordered periodic layered piezoelectric structures

Considering the mechnoelectrical coupling, the localization of SH-waves in disordered periodic layered piezoelectric structures is studied. The waves propagating in directions normal and tangential to the layers are considered. The transfer matrices between two consecutive unit cells are obtained according to the continuity conditions. The expressions of localization factor and localization length in the disordered periodic structures are presented. For the disordered periodic piezoelectric structures, the numerical results of localization factor and localization length are presented and discussed. It can be seen from the results that the frequency passbands and stopbands appear for the ordered periodic structures and the wave localization phenomenon occurs in the disordered periodic ones, and the larger the coefficient of variation is, the greater the degree of wave localization is. The widths of stopbands in the ordered periodic structures are very narrow when the properties of the consecutive piezoelectric materials are similar and the intervals of stopbands become broader when a certain material parameter has large changes. For the wave propagating in the direction normal to the layers the localization length has less dependence on the frequency, but for the wave propagating in the direction tangential to the layers the localization length is strongly dependent on the frequency.

Well-ordered layered LiNi0.8Co0.1Mn0.1O2 submicron sphere with fast electrochemical kinetics for cathodic lithium storage

Nickel-rich layered oxides have drawn sustainable attentions for lithium ion batteries owing to their higher theoretical capacities and lower cost.However,nickel-rich layered oxides also have exposed several defects for commercial application,such as uncontrollable ordered layered structure,which leads to higher energy barrier for Li+diffusion.In addition,suffering from structural mutability,the bulk nickelrich cathode materials likely trigger overall volumetric variation and intergranular cracks,thus obstructing the lithium ion diffusion path and shortening the service life of the whole device.Herein,we report wellordered layered Li Ni0.8Co0.1Mn0.1O2 submicron spheroidal particles via an optimized co-precipitation and investigated as LIBs cathodes for high-performance lithium storage.The as-fabricated Li Ni0.8Co0.1Mn0.1O2 delivers high initial capacity of 228 mAh g–1,remarkable energy density of 866 Wh kg–1,rapid Li ion diffusion coefficient(10–9cm2s–1)and low voltage decay.The remarkable electrochemical performance should be ascribed to the well-ordered layered structure and uniform submicron spheroidal particles,which enhance the structural stability and ameliorate strain relaxation via reducing the parcel size and shortening Li-ion diffusion distance.This work anticipatorily provides an inspiration to better design particle morphology for structural stability and rate capability in electrochemistry energy storage devices.