The size of pores or the grille spacing of water–sediment separation structures directly affects their regulation effect on the debris flow performance.A suitable pore size or grille spacing can effectively improve t...The size of pores or the grille spacing of water–sediment separation structures directly affects their regulation effect on the debris flow performance.A suitable pore size or grille spacing can effectively improve the water–sediment separation ability of the structure.The new funnel-type grating water–sediment separation structure(FGWSS)combines vertical and horizontal structures and provides a satisfactory water–sediment separation effect.However,the regulation effect of the grille spacing of the structure on the debris flow performance has not been studied.The regulation effect of the structure grille spacing on the debris flow performance is studied through a flume test,and the optimal structure grille spacing is obtained.An empirical equation of the relationship between the relative grille spacing of the structure and the sediment separation rate is established.Finally,the influence of the water–sediment separation structure on the regulation effect of debris flows is examined from two aspects:external factors(properties of debris flows)and internal factors(structural factors).The experimental results show that the gradation characteristics of solid particles in debris flows constitute a key factor affecting the regulation effect of the structure on the debris flow performance.The optimum grille spacing of the FGWSS matches the particle size corresponding to the material distribution curves d85~d90 of the debris flow.The total separation rate of debris flow particles is related to the grille spacing of the structure and the content of coarse and fine particles in the debris flow.展开更多
A series of poly(dimethylsiloxane)(PDMS)-4,4′-diphenylmethanediisocyanate(MDI)-poly(ethylene glycol)(PEG) multiblock copolymers were synthesized by employing two-step growth polymerization and investigated by AFM,XPS...A series of poly(dimethylsiloxane)(PDMS)-4,4′-diphenylmethanediisocyanate(MDI)-poly(ethylene glycol)(PEG) multiblock copolymers were synthesized by employing two-step growth polymerization and investigated by AFM,XPS. contact angle system,protein adsorption and platelets adhesion measurements,respectively.It was found that as the molecular weight of PDMS increased,the surface of copolymers had increasing phase separation,while the increase in the molecular weight of PEG decreased the phase separation extents of the copolymer surface.XPS and contact angle measurements showed that the greater the phase separation extent was,the lower both the surface enrichment of PDMS and the surface free energy of the copolymer film were.The protein adsorption experiments indicated that the best phase separation did not exhibit the best biocompatibility.展开更多
The present paper covers the poly (ethylene oxide) macromer with vinyl benzyl terminal group (PEO-VB) prepared by deactivation of the alkoxide function of mono-functional 'living' PEO chains with vinyl benzyl ...The present paper covers the poly (ethylene oxide) macromer with vinyl benzyl terminal group (PEO-VB) prepared by deactivation of the alkoxide function of mono-functional 'living' PEO chains with vinyl benzyl chloride (VBC). The obtained macromers were subjected to careful purification and detailed characterization. A new kind of amphiphilic polystyrene-g-poly(ethylene oxide) (PS-g-PEO) with both mi-crophase separated and PEO side chains was synthesized from radical copolymerization of PEO-VB macromer with styrene monomer. An improved purification method, referred as 'selective dissolvation', was established for the isolation of graft copolymers from the grafting products, and the purity and yield of the purified copolymers were satisfactory. The well-defined structure of the purified copolymers was confirmed by IR, 1H NMR and GPC. The bulk composition of the graft copolymers was determined by a well-established first derivative UV spectrometry. Various experimental parameters controlling the copolymerization were also studied. The results indicate that the feed ratio of macromer to styrene (M/S) was the most important factor in determining the composition of the copolymers. Thus a series of PS-g-PEO with a wide range of bulk compositions were obtained simply by adjusting the value of M/S. As clearly indicated by transmission electron microscopy, this amphiphilic graft copolymers may readily form microphase separated structures.展开更多
A n-type small molecule DC-IDT2E with 4,4,9,9-tetrakis(4-hexylphenyl)-indaceno[1,2-b:5,6-bt]dithiophene as a central building block, furan as rr-bridges, and 1,1 -dicyanomethylene-3-indanone as end acceptor groups,...A n-type small molecule DC-IDT2E with 4,4,9,9-tetrakis(4-hexylphenyl)-indaceno[1,2-b:5,6-bt]dithiophene as a central building block, furan as rr-bridges, and 1,1 -dicyanomethylene-3-indanone as end acceptor groups, was synthesized and used as an electron acceptor in solution-processed organic solar cells (OSCs). DC-IDT2F exhibited good thermal stability, broad and strong absorption in 500-850 rim, a narrow bandgap of 1.54 eV, LUMO of-3.88 eV, HOMO of-5.44 eV and an electron mobility of 6.5 × 10-4 cm2/(V.s). DC-IDT2F-based OSCs with conventional and inverted structures exhibited power conversion efficiencies of 2.26 and 3.08% respec- tively. The effect of vertical phase separation and morphology of the active layer on the device performance in the two structures was studied.展开更多
For the poor adaptability of the original repeating pattern, an improved music separation method of multi-repeating structure of Mel cepstrum coefficient (MFCC) is proposed. Firstly, the MFCC coefficient matrix (39...For the poor adaptability of the original repeating pattern, an improved music separation method of multi-repeating structure of Mel cepstrum coefficient (MFCC) is proposed. Firstly, the MFCC coefficient matrix (39-dimensional data) of the music signal was extracted. Then the cosine characteristic was applied to the count of similarity matrix of MFCC, and the fragments with consistent similarity are putted together. Next different repeating patterns are built for different groups. Thereby the spectrums of the background music and vocal were separated combined with ideal binary masking (IBM), and the corresponding time domain signals were obtained by inverse Fourier transform. Fnally, the improved method was tested on the music database of different types and length, and the separation results were compared with repeating method of Rafii and the non-negative matrix factorization based on flexible framework method of Ozerov. The experimental results showed that the separation performance of improved method was improved about 3 dB, and the performance of music with melody changed larger was significantly improved. Experiments verified that the improved method was an effective music separation algorithm and more stability.展开更多
For solving minimization problems whose objective function is the sum of two functions without coupled variables and the constrained function is linear, the alternating direction method of multipliers (ADMM) has exh...For solving minimization problems whose objective function is the sum of two functions without coupled variables and the constrained function is linear, the alternating direction method of multipliers (ADMM) has exhibited its efficiency and its convergence is well understood. When either the involved number of separable functions is more than two, or there is a nonconvex function~ ADMM or its direct extended version may not converge. In this paper, we consider the multi-block sepa.rable optimization problems with linear constraints and absence of convexity of the involved component functions. Under the assumption that the associated function satisfies the Kurdyka- Lojasiewicz inequality, we prove that any cluster point of the iterative sequence generated by ADMM is a critical point, under the mild condition that the penalty parameter is sufficiently large. We also present some sufficient conditions guaranteeing the sublinear and linear rate of convergence of the algorithm.展开更多
Solvothermal reaction of 3-aminoisonicotinic acid(Haina) and Cu(NO_3)_2·2.5H_2O gave a novel twodimensional(2D) microporous metal–organic framework, [Cu(aina)_2(DMF)]·DMF(1, DMF = N,N-dimethylfor...Solvothermal reaction of 3-aminoisonicotinic acid(Haina) and Cu(NO_3)_2·2.5H_2O gave a novel twodimensional(2D) microporous metal–organic framework, [Cu(aina)_2(DMF)]·DMF(1, DMF = N,N-dimethylformamide). Single-crystal X-ray crystallographic study of compound 1 revealed that Cu(II)ions are linked by ainaàligands forming square grid-like layers, which stack together via multiple hydrogen bonding interactions. The solvent-free framework of 1a displayed considerable porosity(void = 46.5%) with one-dimensional(1D) open channels(4.7 ? ? 4.8 ?) functionalized by amino groups.Gas sorption measurements of 1 revealed selective carbon dioxide(CO_2) and acetylene(C_2H_2) adsorption over methane(CH_4) and nitrogen(N_2) at ambient temperature.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.42027806 and 42041006)。
文摘The size of pores or the grille spacing of water–sediment separation structures directly affects their regulation effect on the debris flow performance.A suitable pore size or grille spacing can effectively improve the water–sediment separation ability of the structure.The new funnel-type grating water–sediment separation structure(FGWSS)combines vertical and horizontal structures and provides a satisfactory water–sediment separation effect.However,the regulation effect of the grille spacing of the structure on the debris flow performance has not been studied.The regulation effect of the structure grille spacing on the debris flow performance is studied through a flume test,and the optimal structure grille spacing is obtained.An empirical equation of the relationship between the relative grille spacing of the structure and the sediment separation rate is established.Finally,the influence of the water–sediment separation structure on the regulation effect of debris flows is examined from two aspects:external factors(properties of debris flows)and internal factors(structural factors).The experimental results show that the gradation characteristics of solid particles in debris flows constitute a key factor affecting the regulation effect of the structure on the debris flow performance.The optimum grille spacing of the FGWSS matches the particle size corresponding to the material distribution curves d85~d90 of the debris flow.The total separation rate of debris flow particles is related to the grille spacing of the structure and the content of coarse and fine particles in the debris flow.
基金supported by the Shanghai Special Nano Foundation and Shanghai Sci.& Tech.Foundation.
文摘A series of poly(dimethylsiloxane)(PDMS)-4,4′-diphenylmethanediisocyanate(MDI)-poly(ethylene glycol)(PEG) multiblock copolymers were synthesized by employing two-step growth polymerization and investigated by AFM,XPS. contact angle system,protein adsorption and platelets adhesion measurements,respectively.It was found that as the molecular weight of PDMS increased,the surface of copolymers had increasing phase separation,while the increase in the molecular weight of PEG decreased the phase separation extents of the copolymer surface.XPS and contact angle measurements showed that the greater the phase separation extent was,the lower both the surface enrichment of PDMS and the surface free energy of the copolymer film were.The protein adsorption experiments indicated that the best phase separation did not exhibit the best biocompatibility.
基金Supported by the National Natural Science Foundation of China The State Education Commission of China
文摘The present paper covers the poly (ethylene oxide) macromer with vinyl benzyl terminal group (PEO-VB) prepared by deactivation of the alkoxide function of mono-functional 'living' PEO chains with vinyl benzyl chloride (VBC). The obtained macromers were subjected to careful purification and detailed characterization. A new kind of amphiphilic polystyrene-g-poly(ethylene oxide) (PS-g-PEO) with both mi-crophase separated and PEO side chains was synthesized from radical copolymerization of PEO-VB macromer with styrene monomer. An improved purification method, referred as 'selective dissolvation', was established for the isolation of graft copolymers from the grafting products, and the purity and yield of the purified copolymers were satisfactory. The well-defined structure of the purified copolymers was confirmed by IR, 1H NMR and GPC. The bulk composition of the graft copolymers was determined by a well-established first derivative UV spectrometry. Various experimental parameters controlling the copolymerization were also studied. The results indicate that the feed ratio of macromer to styrene (M/S) was the most important factor in determining the composition of the copolymers. Thus a series of PS-g-PEO with a wide range of bulk compositions were obtained simply by adjusting the value of M/S. As clearly indicated by transmission electron microscopy, this amphiphilic graft copolymers may readily form microphase separated structures.
基金supported by the National Natural Science Foundation of China(91433114,51261130582,21025418)the 973 Program(2011CB808401)the Chinese Academy of Sciences
文摘A n-type small molecule DC-IDT2E with 4,4,9,9-tetrakis(4-hexylphenyl)-indaceno[1,2-b:5,6-bt]dithiophene as a central building block, furan as rr-bridges, and 1,1 -dicyanomethylene-3-indanone as end acceptor groups, was synthesized and used as an electron acceptor in solution-processed organic solar cells (OSCs). DC-IDT2F exhibited good thermal stability, broad and strong absorption in 500-850 rim, a narrow bandgap of 1.54 eV, LUMO of-3.88 eV, HOMO of-5.44 eV and an electron mobility of 6.5 × 10-4 cm2/(V.s). DC-IDT2F-based OSCs with conventional and inverted structures exhibited power conversion efficiencies of 2.26 and 3.08% respec- tively. The effect of vertical phase separation and morphology of the active layer on the device performance in the two structures was studied.
基金supported by the National Natural Science Foundation of China(61371164,61275099,61102131)the Project of Key Laboratory of Signal and Information Processing of Chongqing(CSTC2009CA2003)+3 种基金the Chongqing Distinguished Youth Fundation(CSTC2011jjjq40002)the Natural Science Foundation of Chongqing(CSTC2012JJA40008)the Research Project of Chongqing Educational Commission(KJ120525,KJ130524)Graduate Research and Innovation Projects of Chongqing(CYS14140)
文摘For the poor adaptability of the original repeating pattern, an improved music separation method of multi-repeating structure of Mel cepstrum coefficient (MFCC) is proposed. Firstly, the MFCC coefficient matrix (39-dimensional data) of the music signal was extracted. Then the cosine characteristic was applied to the count of similarity matrix of MFCC, and the fragments with consistent similarity are putted together. Next different repeating patterns are built for different groups. Thereby the spectrums of the background music and vocal were separated combined with ideal binary masking (IBM), and the corresponding time domain signals were obtained by inverse Fourier transform. Fnally, the improved method was tested on the music database of different types and length, and the separation results were compared with repeating method of Rafii and the non-negative matrix factorization based on flexible framework method of Ozerov. The experimental results showed that the separation performance of improved method was improved about 3 dB, and the performance of music with melody changed larger was significantly improved. Experiments verified that the improved method was an effective music separation algorithm and more stability.
文摘For solving minimization problems whose objective function is the sum of two functions without coupled variables and the constrained function is linear, the alternating direction method of multipliers (ADMM) has exhibited its efficiency and its convergence is well understood. When either the involved number of separable functions is more than two, or there is a nonconvex function~ ADMM or its direct extended version may not converge. In this paper, we consider the multi-block sepa.rable optimization problems with linear constraints and absence of convexity of the involved component functions. Under the assumption that the associated function satisfies the Kurdyka- Lojasiewicz inequality, we prove that any cluster point of the iterative sequence generated by ADMM is a critical point, under the mild condition that the penalty parameter is sufficiently large. We also present some sufficient conditions guaranteeing the sublinear and linear rate of convergence of the algorithm.
基金supported by the grant AX-1593(JCGZ)and AX1730(BC)from the Welch Foundation
文摘Solvothermal reaction of 3-aminoisonicotinic acid(Haina) and Cu(NO_3)_2·2.5H_2O gave a novel twodimensional(2D) microporous metal–organic framework, [Cu(aina)_2(DMF)]·DMF(1, DMF = N,N-dimethylformamide). Single-crystal X-ray crystallographic study of compound 1 revealed that Cu(II)ions are linked by ainaàligands forming square grid-like layers, which stack together via multiple hydrogen bonding interactions. The solvent-free framework of 1a displayed considerable porosity(void = 46.5%) with one-dimensional(1D) open channels(4.7 ? ? 4.8 ?) functionalized by amino groups.Gas sorption measurements of 1 revealed selective carbon dioxide(CO_2) and acetylene(C_2H_2) adsorption over methane(CH_4) and nitrogen(N_2) at ambient temperature.