A New Technology to Measure the Thermoelectric Performance of Nanowire Array Structure

Recently, the study on one-dimensional thermoelectric materials is getting more and more attention. For those one-dimensional thermoelectric materials with nanowire array structure fabricated with alumina film as template, its thickness is often in the range of 10 to several tens micrometers, and the conventional measurement cannot be used. The key difficulties of the thermoelectric performance measurement for nanowire array materials include two aspects: 1) How to heat the two sides of the specimen uniformly and keep the temperature difference constantly at the same time; 2) How to measure the temperature of the two sides of the specimen with the thickness of 10 to several tens micrometers. A new type heating and temperature measuring technology has been used, and it can be simply described as liquid heating and separate temperature measurement. According to this principle, a thermoelectric performance measurement system has been established.

Combined Insights from Leachate Structure and Microstructure Characteristics for Eating Quality of Convenience Rice Processed by Super-Heated and Pressurized Steam Technologies

Convenience rice has become widely popular due to its easy availability for cooking. This study investigated the starch structure and composition of leachate and the microstructure of reheated convenience rice using novel processing technologies: super-heated steaming(SHS), auto-electric cooking(AEC), and pressurized-steam cooking(PSC). Additionally, the effect of two different target water contents(58% and 63%) was also evaluated. The PSC_63% sample had the highest total solids and amylopectin amount in the leachate. The amylopectin amount in the leachate differed significantly based on the targeted water content. Morphological characterization revealed that the swelling of starch and the coated layer on the surface of rice grains were most pronounced in the PSC_63% sample due to the pressure processing. The textural hardness of the AEC_58% sample was much higher than that of the other samples. The PSC_63% sample had the highest textural adhesiveness value, which can be attributed to the highest amylopectin amount in the leachate. Sensory characterization showed that the PSC_63% sample had the highest glossiness, whiteness, moistness, and overall acceptability. The principal component analysis score plots presented substantial differences in the leachate and textural and sensory characteristics of reheated convenience rice among the different processing technologies.

Review and Prospect of Research on Structural Health Monitoring Technology for Bridges

As a crucial infrastructure in the transport system,the safe operation of bridges is directly related to all aspects of people’s daily lives.The development of bridge structural health monitoring technology and its application play an important role in ensuring the safety and extending the service life of bridges.This paper carries out in-depth research and analysis on the related technology of bridge structural health monitoring.Firstly,the existing monitoring technologies at home and abroad are sorted out,and the advantages and problems of various methods are compared and analyzed,including nondestructive testing,stress measurement,vibration characteristic identification,and other commonly used monitoring technologies.Secondly,the key technologies and equipment in the bridge health monitoring system,such as sensor technology,data acquisition,and processing technology,are introduced in detail.Finally,the development trend in the field of bridge health monitoring is prospected from both theoretical research and technical application.In the future,with the development of emerging technologies such as big data,cloud computing,and the Internet of Things,it is expected that bridge health monitoring with intelligent and systematic features will be more widely applied to provide a stronger guarantee for the safe and efficient operation of bridges.

Technology of structure damage monitoring based on multi-agent

The health monitoring for large-scale structures need to resolve a large number of difficulties,such as the data transmission and distributing information handling.To solve these problems,the technology of multi-agent is a good candidate to be used in the field of structural health monitoring.A structural health monitoring system architecture based on multi-agent technology is proposed.The measurement system for aircraft airfoil is designed with FBG,strain gage,and corresponding signal processing circuit.The experiment to determine the location of the concentrate loading on the structure is carried on with the system combined with technologies of pattern recognition and multi-agent.The results show that the system can locate the concentrate loading of the aircraft airfoil at the accuracy of 91.2%.

Hydraulic metal structure health diagnosis based on data mining technology

In conjunction with association rules for data mining, the connections between testing indices and strong and weak association rules were determined, and new derivative rules were obtained by further reasoning. Association rules were used to analyze correlation and check consistency between indices. This study shows that the judgment obtained by weak association rules or non-association rules is more accurate and more credible than that obtained by strong association rules. When the testing grades of two indices in the weak association rules are inconsistent, the testing grades of indices are more likely to be erroneous, and the mistakes are often caused by human factors. Clustering data mining technology was used to analyze the reliability of a diagnosis, or to perform health diagnosis directly. Analysis showed that the clustering results are related to the indices selected, and that if the indices selected are more significant, the characteristics of clustering results are also more significant, and the analysis or diagnosis is more credible. The indices and diagnosis analysis function produced by this study provide a necessary theoretical foundation and new ideas for the development of hydraulic metal structure health diagnosis technology.

CONSTRUCTION OF UNDERGROUND HYDRAULIC STRUCTURES AND TBM TECHNOLOGY IN CHINA

This paper deals with the construction of underground hydraulic structures and TBM technology in China——past,present and future. China ranks number one in the world in water power. But,the ratio of developed to potential hydropower is only about 20%. The exploitable water power in West China,where is featured by high mountain and complex geology,accounts for 83% of the total for China. Most of the project structures have to be located underground. The projected length of hydraulic underground openings per year is about 180 km. Several underground projects completed,under execution and planned are highlighted in this paper. Finally,general information about the development of TBM technology in hydraulic construction in China is outlined.

Analysis of the Development Structure on Non-governmental Enterprises of Science and Technology

Based on the development of the non-governmental enterprises of science and technology in the past twenty years, this paper applied an interpretive structure model (ISM) to make a research on the regular development pattern of these enterprises and to probe into the interior development mechanism theoretically. The studying results supply ideas underlying the scientific decision for the governments at all levels and show the direction of the development of the non-governmental enterprises of science and technology in the future.

Information Technology and Paradigm Shifting in Organizational Structure and Strategy

This paper examines the impacts of information technology (IT) on LDCs' competitive conditions, especially the impacts on intra-organization's linkage and technology capability formation via innovation, as the rising of the new paradigms of system integration. And some strategic implications are made.

Research on the process of fabricating a multi-layer metal micro-structure based on UV-LIGA overlay technology

In this paper,we report the study of the process of fabricating a multi-layermetal micro-structure using UV-LIGA overlay technology,includingmask fabrication,substrate treatment,and UV-LIGA overlay processes.To solve the process problems in the masking procedure,the swelling problemof the first layer of SU-8 thick photoresist was studied experimentally.The 5μmline-width compensation and closed 20μmand 30μmisolation strips were designed and fabricated around the micro-structure pattern.The pore problemin the Ni micro-electroforming layer was analyzed and the electroforming parameters were improved.The pH value of the electroforming solution should be controlled between 3.8 and 4.4 and the current density should be below 3 A/dm^2.To solve the problems of high inner stress and incomplete development of the micro-cylinder hole array with a diameter of 30μm,the lithography process was optimized.The pre-baking temperature was increased via gradient heating and rose every 5℃ from 65℃ to 85℃ and then remained at 85℃ for 50 min–1 h.In addition,the full contact exposure was used.Finally,a multi-layer metal micro-structure with high precision and good quality of microelectroforming layer was fabricated using UV-LIGA overlay technology.

Mechanism of realizing industrial structure upgrading through technology-driven regional innovation capacity

Based on the analysis of the formation process of regional innovation capacity, this paper expatiates that the technology is the basis for industrial structure upgrading, while technological innovation is the power of regional innovation capacity. It points out that the essential of regional industrial structure upgrading is the transition of regional technology structure from one balance to another. The mechanism of realizing industrial structure upgrading through technology-driven regional innovation capacity is also discussed briefly.

Analysis on Construction Quality Control Technology of Reinforced Concrete Shear Wall Structure

In the process of continuous development of construction enterprises, new requirements have been put forward for construction projects. By strengthening the construction quality control of reinforced concrete shear wall structure, the construction level of reinforced concrete can be continuously improved, the construction quality can be guaranteed, and the construction project can be successfully completed, which is worthy of extensive application and promotion in construction enterprises, thus providing a broader development space for construction enterprises.

Application of BIM Technology in Building Structure Design

With the emergence of BIM technology,the design concepts and methods of building structures have also changed.For construction design work,it is necessary to reasonably control the various elements of building structure design and scientifically and rationally design the building structure to facilitate onsite construction.Based on this situation,the current BIM technology plays an increasingly important role in the process of building structure design and plays an active role in promoting optimal building structure design.

Study on Cognitive Optical Network Structure and Self-optimization with the Application of Artificial Intelligence Technology

Cognitive optical network is the intermediate to combine artificial intelligence technology with network,and also the important network technology to promote network intelligence level constantly.In the paper,it analyzes the cognitive optical network structure with the application of artificial intelligence technology by starting from the basic conditions of cognitive network and cognitive optional network on the basis of fully understanding the connotation of cognitive network and cognitive optical network,and explores its self-governance functions,so as to better realize the self-optimization and self-configuration of network.

The optimization method of industrial robot arm structure based on green manufacturing technology

In order to realize the optimal design of the industrial robot arm structure,an optimization method of the industrial robot arm structure based on green manufacturing technology is proposed.The stability of arm structure parameter acquisition can be controlled.The quantitative adjustment model of structural optimization parameters is constructed.The differential fusion control of the arm structure is realized.This paper analyzes the structure parameter law of the robot arm.We use dynamic parameter prediction and output torque parameter compensation method to control the arm structure.According to the adaptive iterative processing results,the arm structure parameter identification is realized.According to the identification results,the cutting parameter optimization method is adopted for the analytical control of the arm structure,and finally the optimized design of the industrial robot arm structure is realized through the green manufacturing technology.The simulation test results show that for the accuracy of the industrial robot arm structure design,this method is better,the output stability is higher,and the arm motion trajectory has a low deviation from the actual motion trajectory,which improves the optimization control and design capabilities of the industrial robot arm structure.

Discussion on Construction Technology and Welding Deformation of High-Rise Steel Frame Structure

Because of urbanization,land resources in China’s cities has become increasingly scarce.Therefore,modern buildings are becoming taller,making high-rise steel frame structures the new favorite of the construction industry.However,the construction of high-rise steel frame structures requires advanced technology.If the construction technology is effectively implemented and the welding techniques of the construction personnel align with the requirements for high-rise steel frame structures,it can help mitigate deformations in the steel structure,thus preserving the overall construction quality of high-rise steel frame structures.To enhance the applicability of steel frame structures in high-rise buildings,this paper focuses on analyzing the optimization path for the construction process of high-rise steel frame structures.It introduces a tailored approach to control welding-induced deformations in steel frame structures,aiming to make a valuable contribution to the advancement of China’s construction industry.

BIM Technology in Application of Structure Construction in Hubei Olympic Sports Center

With the rapid development of modern large-span and large-complex steel structure buildings,at present the Building Information Modeling(BIM)technology plays an important role from the design to the construction of a building.This study takes the Comprehensive Gymnasium of Hubei Olympic Sports Center as the carrier and introduce the BIM technology from two aspects;The technology;and the management.Further,the optimal application of BIM technology in the complex component nodes,the technical guidance of component processing,and the correction and verification of drawings were emphatically analyzed in this paper.An engineering practice shows that the application of BIM technology has greatly improved the production efficiency,shortened the construction period,reduced unnecessary cost,and lastly laid a solid foundation for the smooth completion of the project.

Research on Construction Technology of Prefabricated Structure Based on BIM Technology

Building information modeling(BIM)technology simulates visual information data by integrating the information data of construction projects.The presentation of information parameters allows better collaborative management of the construction process.BIM technology is applied to integrate information data during the construction of prefabricated structures,analyze the source of information data of construction projects,and build a digital information model.BIM technology consists of information integration function,information data simulation,cross-region coordination and more.Therefore,this paper applies it to the process of prefabricated structure design,puts forward relevant technical research strategies,establishes relevant models,ensures the accuracy of drawing,and simulates the final construction effect according to the combination of arranged relevant parameters.

Analysis on Construction Technology of Concrete Structure in Civil Engineering

The rapid development of science and technology puts forward higher requirements for new building construction,especially in civil engineering construction.The construction quality of construction engineering is the core management and the testing link.The Concrete structure is an important safety and quality guarantee in the project and is the top priority in the civil engineering.In civil engineering,the concrete structure has an important social impact on the continuous research and development,and application of construction technology.This paper,discuss the advantage and disadvantage of using concrete in building construction.

The Construction Technology of Freeform Surface Spatial Bending-Torsion Steel Structure

Taking the construction project of the National Cybersecurity Talents and Innovation Base as an example,this paper studies the construction technology of freeform surface spatial bending-torsion steel structure based on structural design model transformation,including the parametric modeling of deepening design model,computer-aided bending and torsion frame production,flexible docking in the bending-torsion combination unit,and welding stress deformation,in hope to provide reference for similar projects in the future.

Analysis of Soundproof Technology of Assembled Steel Structure Houses

The problem of noise has always been highlighted in assembled steel structure houses.Therefore,it is necessary to use effective soundproof measures where steel beams intersect with the reserved line pipe openings,doors,windows,elevator shafts,and other locations.In this paper,we will investigate the areas with subpar soundproof performance in an assembled steel structure residential project and propose suitable noise control measures to address this issue.