Photocatalytic hydrogen-evolution dimerization of styrenes to synthesize 1,2-dihydro-1-arylnaphthalene derivatives using Acr^+-Mes and cobaloxime catalysts

We report a hydrogen-evolution dimerization of styrenes via the synergistic merger of Acr＋-Mes photocatalyst and cobaloxime proton reduction catalysts. By utilizing this dual catalyst system, 1,2-dihydro-1-arylnaphthalene derivatives can be directly constructed from commercially available styrenes. Our reaction proceeds smoothly under mild conditions without the need for oxidants or hydrogen atom transfer reagents, and the sole byproduct is hydrogen gas. Mechanistic investigation suggests that the reaction is initiated by photoinduced electron transfer under visible-light irradiation.

Poly Ethylene Glycols as Efficient Media for the Synthesis of <i>β</i>-Nitro Styrenes from <i>α</i>, <i>β</i>-Unsaturated Carboxylic Acids and Metal Nitrates under Conventional and Non-Conventional Conditions

Poly ethylene glycols (PEG-200, 400, 600, 4000 and 6000) supported reactions were conducted with certain α, β-unsaturated acids in presence of metal nitrates under solvent free (solid state) and mineral acid free conditions. The reactants were ground in a mortar with a pestle for about 30 minutes. The aromatic acids underwent nitro decarboxylation and afforded β-nitro styrene derivatives in very good yield while α, β-unsaturated aliphatic carboxylic acids gave corresponding nitro derivatives. Addition of PEG accelerated rate of the reaction enormously. Reaction times substantially decreased from several hours to few minutes followed by highly significant increase in the product yield. Among the several PEGs PEG-300 has been found to be much more effective than other PEGs.

Room-Temperature Electroreductiveα-Alkylation of N-Heteroarenes with Styrenes

Despite their interesting applications,direct and diverse syntheses of aryl-fused 2-alkyl cyclic amines still remain challenging.Here,the concept of incorporating a C–C coupling process into the N-heteroaryl reduction was successfully applied to fulfill such a synthetic purpose.Due to our use of controllable electroreduction coupled with proton abstraction,we can report a room-temperature reductiveα-alkylation of the inert N-heteroarenes with abundantly available styrenes in an undivided Zn(+)/C(−)cell.This proceeds with good substrate compatibility and operational simplicity,utilizes cost-effective sacrificial Zn-anode,exhibits high selectivity,and does not need pressurized H2 gas and transition-metal catalysts.This current work offers a useful platform for direct construction of valuable aryl-fused 2-alkyl cyclic amines that are difficult to access with conventional methods.

Nickel-Catalyzed Regiodivergent Acylzincation of Styrenes with Organozincs and CO

Transition metal-catalyzed carbometallation of unsaturated hydrocarbons constitutes one of the most efficient synthetic methodologies for the construction of C—C bond.Recently,the incorporation of organometallic reagent with the CO gas as a nucleophilic acyl synthon could enable the acylmetallation reaction,which greatly increases the horizon of carbometallation chemistry.Herein,we report a nickel-catalyzed regiodivergent acylzincation of o-cyano cinnamate ester and o-cyano styrene,in which the cyano moiety intramolecularly captures zinc intermediates to trigger the tandem cyclization process.This protocol features mild conditions,broad substrate scope and excellent functional group tolerance,thus affording a diverse array of highly functionalized carbocyclic compounds.

Metal-free tetra-n-butylammonium bromide-mediated aerobic oxidative synthesis of β-ketosulfones from styrenes

An efficient and broadly applicable protocol for the aerobic coupling of styrenes with sulfonylhydrazides has been developed that affords P-ketosulfones bearing various functional groups in moderate to excellent yields.The preliminary experimental results support the involvement of active benzyl radical species,and a radical pathway was therefore proposed for the reaction.

Advances in cycloaddition and hydroaddition reaction of α -(trifluoromethyl)styrenes without defluorination: An alternative approach to CF_(3) -containing compounds

α-(Trifluoromethyl)styrene and its derivatives have found wide applications in the fields of pharmaceuti-cals,agrochemicals,and advanced materials.They are also versatile trifluoromethyl-containing building blocks for the preparation of various trifluoromethyl-containing,fluorine-containing or nonfluorinated compounds.Recently,great efforts have been made to develop diverse reactions for rapidly accessing a wide range of valuable gem–difluoroalkenes and gem–difluoroalkylated compounds via defluorinative re-action or the defluorinative ipso-functionalization reaction ofα-(trifluoromethyl)styrenes,respectively.In contrast,α-(trifluoromethyl)styrenes remain notably underdeveloped with respect to their use in cycload-dition and hydroaddition reaction with retaining of three C–F bonds.This short review herein is aimed to summarize the recent progress on the cycloaddition and hydroaddition reaction including nucleophilic,radical and transition metal-catalyzed addition ofα-(trifluoromethyl)styrenes without accompanying de-fluorination.

Copper-Catalyzed Ligand-Controlled Selective Borocarbonylation of α-Substituted Styrenes Toward β-Boryl Aldehydes and Cyclopropyl Boronate Esters

We report a copper-catalyzed ligand-controlled selective carbonylative borofunctionalization ofα-substituted styrenes.This reaction provides a general and versatile procedure to synthesize a variety of synthetically usefulβ-boryl quaternary aldehydes and cyclopropyl boronate esters bearing a quaternary carbon center.With NHC(IMes=1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene)as the ligand,the carbene intermediate reacts with O-H bond of alcohol while the carbene intermediate would undergo C-H bond insertion when using phosphine ligand[1,2-bis(diphenylphospino)ethane]as the ligand.Formation of a carbene intermediate has been proposed as the key step for this transformation.

Fluorescence quenching of para-substitutedstyrenes by tetramethylethylene. Correlationanalysis of the quenching coefficient KSV and thequenching rate constant k_q by the dual-parameter equation with polar and spin-delocalization substituent constants

The fluorescence quenching coefficient (Ksv) and the quenching rate constant kq of ten para-substituted styrenes (1-Ys) have been measured and correlation-analyzed by both the dual-parameter equation (Eq. 1) with (ρxσx+ρ'σ') and the single-parameter equation (Eq. 2) with ρxσx. Ex-cellent results have been obtained for the correlation of KSV against (ρxσmb+ρ'σ'JJ) or (ρxσ+ +ρ'σ'JJ). Our results suggest that, possibly, there might be no need to use excited-state substituent constant for the fluorecence quenching process of excited states of styrenes.

Et_(3)N-Catalyzed Cycloaddition Reactions ofα-(Trifluoromethyl)styrenes with 2,2,2-Trifluorodiazoethane to Access Bis(trifluoromethyl)-Substituted Pyrazolines

A novel and practical method for the synthesis of 3,5-bis(trifluoromethyl)-4,5-dihydro-1H-pyrazoles by [3+2] cycloaddition reactions of α-(trifluoromethyl)styrenes with 2,2,2-trifluorodiazoethane (CF3CHN2) has been developed. The cyclization reaction proceeds smoothly in the presence of a catalytic amount of Et_(3)N, affording a variety of bis(trifluoromethyl)-substituted 2-pyrazolines in good to excellent yields. This method also exhibits a broad substrate scope and tolerates various functional groups.

1,1-Regioselective alkenylboration of styrenes enabled by palladium catalysis

Despite the 1,2-difunctionalization reactions of styrenes have been well developed, the 1,1-regioselective addition reaction remains challenging. We disclose herein a palladium-catalyzed, highly 1,1-regioselective alkenylboration of styrenes by using alkenyl triflates and a diboron reagent as the coupling partners. A wide scope of styrenes derivatives and alkenyl triflates participate this reaction to provide the corresponding allyl boronates with high regioisomeric ratios. The success of this reaction is ascribed to the application of 1,10-phenanthroline-derivated ligand and the addition of ammonium chloride salt. Moreover, acrylate esters can also selectively afford the 1,1-alkenylboration products under the same reaction conditions.

Electrochemical Oxidative [4+2] Annulation of Different Styrenes toward the Synthesis of 1,2-Dihydronaphthalenes

A[4+2]annulation of two different styrenes to construct polysubstituted 1,2-dihydronaphthalenes was achieved.This transformation proceeded smoothly under electrochemical oxidative conditions without metal catalysts and external oxidants.A series of polysubstituted 1,2-dihydronaphthalenes were obtained with high regioselectivity and diastereoselectivity.Moreover,polysubstituted 1,2-dihydronaphthalenes were further transformed to polysubstituted 1,2,3,4-tetrahydronaphthalenes and polysubstituted naphthalenes,which show great potential in synthetic applications.

Enantioselective Arylcyanation of Styrenes via Copper-Catalyzed Radical Relay

The first copper-catalyzed enantioselective arylcyanation of styrenes has been developed using readily available anilines as aryl radical precursors under mild conditions,which enables easy access to chiral 2,3-diaryl propionitriles with moderate to good enantiose-lectivities.This operationally straightforward reaction exhibits broad substrate scope and functional group tolerance.Notably,this method has been applied to the synthesis of chiral AlEgen as well as estrogen receptor-B agonist(R)-diarylpropionitrile(DPN).

Selective Dealkenylative Functionalization of Styrenes via C-C Bond Cleavage

As a readily available feedstock,styrene with about 25 million tons of global annual production serves as an important building block and organic synthon for the synthesis of fine chemicals,polystyrene plastics,and elastomers.Thus,in the past decades,many direct transformations of this costless styrene feedstock were disclosed for the preparation of high-value chemicals,which to date,generally performed on the functionalization of styrenes through the allylic C-H bond,C(sp2)-H bond,or the C=C double bond cleavage.However,the dealkenylative functionalization of styrenes via the direct C-C single bond cleavage is so far challenging and still unknown.Herein,we report the novel and efficient C-C amination and hydroxylation reactions of styrenes for the synthesis of valuable aryl amines and phenols via the site-selective C(Ar)-C(alkenyl)single bond cleavage.This chemistry unlocks the new transformation and application of the styrene feedstock and provides an efficient protocol for the late-stage modification of substituted styrenes with the site-directed dealkenylative amination and hydroxylation.

Cobalt-Catalyzed Difunctionalization of Styrenes via Ligand Relay Catalysis

Here,we report a cobalt-catalyzed sequential dehydrogenative Heck silylation/hydroamination of styrenes with hydrosilane and diazo compound to access 1-amino-2-silyl compounds with excellent regioselectivity.This difunctionalization reaction could undergo smoothly using 1 mol%catalyst loading with good functional group tolerance.Not only di-and tri-substituted hydrosilanes,but also alkoxysilane is suitable,which does explore the scope of the family of 1-amino-2-silyl compounds.The ligand relay phenomenon between neutral tridentate NNN ligand and anionic NNN ligand is observed for the first time via absorption spectral analysis in this one-pot,two-step transformations.The primary mechanism has been proposed based on the control experiments.

Rhenium-Catalyzed Decarboxylative Tri-/Difluoromethylation of Styrenes with Fluorinated Carboxylic Acid-Derived Hypervalent Iodine Reagents

Summary of main observation and conclusion Herein,unprecedented rhenium-catalyzed decarboxylative oxytri-/difluoromethylation and Heck-type trifluoromethylation of styrenes have been developed by using hypervalent iodine(Ⅲ)reagents derived from cheap,stable,and easy-handling fluorinated carboxylic acids.Mechanistic studies revealed a radical decarboxylative trifluoromethylation pathway occurring in these reactions.

Bio-Based Waterborne Poly(Vanillin-Butyl Acrylate)/MXene Coatings for Leather with Desired Warmth Retention and Antibacterial Properties

This study presents a solvent-free,facile synthesis of a bio-based green antibacterial agent and aromatic monomer methacrylated vanillin(MV)using vanillin.The resulting MV not only imparted antibacterial properties to coatings layered on leather,but could also be employed as a green alternative to petroleum-based carcinogen styrene(St).Herein,MV was copolymerized with butyl acrylate(BA)to obtain waterborne bio-based P(MV-BA)miniemulsion via miniemulsion polymerization.Subsequently,MXene nanosheets with excellent photothermal conversion performance and antibacterial properties,were introduced into the P(MV-BA)miniemulsion by ultrasonic dispersion.During the gradual solidification of P(MV-BA)/MXene nanocomposite miniemulsion on the leather surface,MXene gradually migrated to the surface of leather coatings due to the cavitation effect of ultrasonication and amphiphilicity of MXene,which prompted its full exposure to light and bacteria,exerting the maximum photothermal conversion efficiency and significant antibacterial efficacy.In particular,when the dosage of MXene nanosheets was 1.4 wt%,the surface temperature of P(MV-BA)/MXene nanocomposite miniemulsioncoated leather(PML)increased by about 15℃ in an outdoor environment during winter,and the antibacterial rate against Escherichia coli and Staphylococcus aureus was nearly 100%under the simulated sunlight treatment for 30 min.Moreover,the introduction of MXene nanosheets increased the air permeability,water vapor permeability,and thermal stability of these coatings.This study provides a new insight into the preparation of novel,green,and waterborne bio-based nanocomposite coatings for leather,with desired warmth retention and antibacterial properties.It can not only realize zerocarbon heating based on sunlight in winter,reducing the use of fossil fuels and greenhouse gas emissions,but also improve ability to fight off invasion by harmful bacteria,viruses,and other microorganisms.

Fe-Al络合催化苯乙烯-马来酸酐交替共聚

应用Ｆｅ（ａｃａｃ）３Ａｌ（ｉＢｕ）３（ａｃａｃ＝乙酰丙酮）催化苯乙烯马来酸酐共聚，制得富于交替的白色粉末共聚物．共聚反应动力学研究表明，共聚反应与单体浓度呈一级关系，表观活化能为４８６ｋＪ／ｍｏｌ．

One-pot synthesis of ordered mesoporous Cu-KIT-6 and its improved catalytic behavior for the epoxidation of styrene:Effects of the pH value of the initial gel

The heterogeneously copper-catalyzed oxidative cleavage of styrene was studied using copper-doped mesoporous KIT-6（CU-KIT-6_x） prepared via pH adjustment（where x is the pH：1.43,2.27,3.78,3.97,4.24 or 6.62）.Variations in the catalyst structure and morphology with pH values were characterized by X-ray power diffraction,nitrogen adsorption-desorption analysis,transmission electron microscopy and X-ray photoelectron spectroscopy.As the pH value applied during the initial synthesis,the resulting Cu-KIT-6_x exhibited different structural,textural and surface characteristics,especially in terms of specific copper species and copper content At a pH value of 3.78,approximately 4.6 wt%copper（Ⅱ） was successfully incorporated into the framework of the initial KIT-6,in the form of-Cu-O-Si- groups.The catalytic performance of each catalyst was evaluated by following the epoxidation of styrene,employing tert-butyl hydroperoxide as the oxidant and CH_3CN as the solvent.A significant styrene conversion of 43.5%with 86.6%selectivity for the desired styrene epoxide was obtained over the Cu-KIT-63.78.A higher Cu content,an ordered cubic laid mesoporous architecture and various specific textural characteristics all combined to endow the Cu-KIT-63.78 with high catalytic activity and good stability.

An Investigation on the Polymerization of Styrene by Fluorescence Probe Technique

The polymerization of styrene is monitored by pyrene excimer formation. The ratio of monomer to excimer intensities ( I m/ I e) of pyrene increases as polymerization proceeds. The increase of I m/ I e is ascribed to the increase of microviscosity surrounding the probes forming excimer during polymerization. The linear relationship between the changing rate of I m/ I e and the polymerization rate of styrene is obtained. Therefore, I m/ I e may be used to monitor the progress of the polymerization of styrene.