Resource allocation in the context of OFDMA-based systems is challenging, given a combinatorial nature of the problem. In the context of IEEE 802.16 systems this problem is further exacerbated by additional constraint...Resource allocation in the context of OFDMA-based systems is challenging, given a combinatorial nature of the problem. In the context of IEEE 802.16 systems this problem is further exacerbated by additional constraints that are faced with its two dimensional frame nature. The main challenges associated with resource allocation in these systems are: mapping the allocated bandwidth resources to users in this two dimensional frame, power and frequency allocation, and Qo S guarantee. This optimization problem can usually be solved by an iterative algorithm. The solutions proposed have a constant step size in iterations which causes a long convergence time. For this reason, the solutions proposed are not applicable in IEEE 802.16 systems. In this paper we propose a novel resource allocation algorithm in IEEE 802.16 systems which has an adaptive step size in iterations while taking into account the minimum rate guarantee for users.展开更多
This paper presents a comparative analysis of different parameters such as enthalpy, moderator temperature, moderator density, flow velocity, pressure, and fuel temperature profile at the fuel pin cell level of PWR. M...This paper presents a comparative analysis of different parameters such as enthalpy, moderator temperature, moderator density, flow velocity, pressure, and fuel temperature profile at the fuel pin cell level of PWR. Moreover, in this paper pitches to fuel pin radius ratio are varied from 2.3 to 4. The methods and implementation strategy are such that the coupled neutronic and thermal-hydraulic analysis is executed in a fully one dimensional (1D) manner. The thermal hydraulic is based on moderator/coolant mass and enthalpy equation together with one group diffusion equation for fuel pin. Modelling of fuel pin cell and subchannel is executed in two steps. First, the governing equations are derived assuming that all the parameters appearing in the equations are temperature independent. Fuel pin centerline temperature and radially averaged temperature equations are derived from Fourier laws of thermal conductivity. Finally, diffusion coefficient, fission cross-section and absorbing cross-section are evaluated with respect to the fuel pin temperature. The outcome will be helpful for further neutronics and thermal analysis of PWR. Thermal hydraulics parameter varies the maximum 30 percentage from the lowermost value.展开更多
Well-controlled resource allocation is crucial for promoting the performance of multiple input multiple output orthogonal frequency division multiplexing(MIMO-OFDM) systems. Recent studies have focused primarily on tr...Well-controlled resource allocation is crucial for promoting the performance of multiple input multiple output orthogonal frequency division multiplexing(MIMO-OFDM) systems. Recent studies have focused primarily on traditional centralized systems or distributed antenna systems(DASs), and usually assumed that one sub-carrier or sub-channel is exclusively occupied by one user. To promote system performance, we propose a sub-channel shared resource allocation algorithm for multiuser distributed MIMO-OFDM systems. Each sub-channel can be shared by multiple users in the algorithm, which is different from previous algorithms. The algorithm assumes that each user communicates with only two best ports in the system. On each sub-carrier, it allocates a sub-channel in descending order, which means one sub-channel that can minimize signal to leakage plus noise ratio(SLNR) loss is deleted until the number of remaining sub-channels is equal to that of receiving antennas. If there are still sub-channels after all users are processed, these sub-channels will be allocated to users who can maximize the SLNR gain. Simulations show that compared to other algorithms, our proposed algorithm has better capacity performance and enables the system to provide service to more users under the same capacity constraints.展开更多
Coordinated multi-point transmission and reception (CoMP) for single user, named as SU-CoMP, is considered as an efficient approach to mitigate inter-cell interference in orthogonal frequency division multiple acce...Coordinated multi-point transmission and reception (CoMP) for single user, named as SU-CoMP, is considered as an efficient approach to mitigate inter-cell interference in orthogonal frequency division multiple access (OFDMA) systems. Two prevalent approaches in SU-CoMP are coordinated scheduling (CS) and joint processing (JP). Although JP in SU-CoMP has been proved to achieve a great link performance improvement for the cell-edge user, efficient resource allocation (RA) on the system level is quite needed. However, so far limited work has been done considering JP, and most existing schemes achieved the improvement of cell-edge performance at cost of the cell-average performance degradation compared to the single cell RA. In this paper, a two-phase strategy is proposed for SU-CoMP networks. CS and JP are combined to improve both cell-edge and cell-average performance. Compared to the single cell RA, simulation results demonstrate that, the proposed strategy leads to both higher cell-average and cell-edge throughput.展开更多
文摘Resource allocation in the context of OFDMA-based systems is challenging, given a combinatorial nature of the problem. In the context of IEEE 802.16 systems this problem is further exacerbated by additional constraints that are faced with its two dimensional frame nature. The main challenges associated with resource allocation in these systems are: mapping the allocated bandwidth resources to users in this two dimensional frame, power and frequency allocation, and Qo S guarantee. This optimization problem can usually be solved by an iterative algorithm. The solutions proposed have a constant step size in iterations which causes a long convergence time. For this reason, the solutions proposed are not applicable in IEEE 802.16 systems. In this paper we propose a novel resource allocation algorithm in IEEE 802.16 systems which has an adaptive step size in iterations while taking into account the minimum rate guarantee for users.
文摘This paper presents a comparative analysis of different parameters such as enthalpy, moderator temperature, moderator density, flow velocity, pressure, and fuel temperature profile at the fuel pin cell level of PWR. Moreover, in this paper pitches to fuel pin radius ratio are varied from 2.3 to 4. The methods and implementation strategy are such that the coupled neutronic and thermal-hydraulic analysis is executed in a fully one dimensional (1D) manner. The thermal hydraulic is based on moderator/coolant mass and enthalpy equation together with one group diffusion equation for fuel pin. Modelling of fuel pin cell and subchannel is executed in two steps. First, the governing equations are derived assuming that all the parameters appearing in the equations are temperature independent. Fuel pin centerline temperature and radially averaged temperature equations are derived from Fourier laws of thermal conductivity. Finally, diffusion coefficient, fission cross-section and absorbing cross-section are evaluated with respect to the fuel pin temperature. The outcome will be helpful for further neutronics and thermal analysis of PWR. Thermal hydraulics parameter varies the maximum 30 percentage from the lowermost value.
基金Project supported by the National High-Tech R&D Program(863) of China(Nos.2012AA01A502 and 2012AA01A505)
文摘Well-controlled resource allocation is crucial for promoting the performance of multiple input multiple output orthogonal frequency division multiplexing(MIMO-OFDM) systems. Recent studies have focused primarily on traditional centralized systems or distributed antenna systems(DASs), and usually assumed that one sub-carrier or sub-channel is exclusively occupied by one user. To promote system performance, we propose a sub-channel shared resource allocation algorithm for multiuser distributed MIMO-OFDM systems. Each sub-channel can be shared by multiple users in the algorithm, which is different from previous algorithms. The algorithm assumes that each user communicates with only two best ports in the system. On each sub-carrier, it allocates a sub-channel in descending order, which means one sub-channel that can minimize signal to leakage plus noise ratio(SLNR) loss is deleted until the number of remaining sub-channels is equal to that of receiving antennas. If there are still sub-channels after all users are processed, these sub-channels will be allocated to users who can maximize the SLNR gain. Simulations show that compared to other algorithms, our proposed algorithm has better capacity performance and enables the system to provide service to more users under the same capacity constraints.
基金supported by the National Natural Science Foundation of China (61001116)State Emphasis Special Project 2009ZX03003-011-02+1 种基金the Hi-Tech Research and Development Program of China (2009AA011506)International Scientific and Technological Cooperation Program (2010DFA11060)
文摘Coordinated multi-point transmission and reception (CoMP) for single user, named as SU-CoMP, is considered as an efficient approach to mitigate inter-cell interference in orthogonal frequency division multiple access (OFDMA) systems. Two prevalent approaches in SU-CoMP are coordinated scheduling (CS) and joint processing (JP). Although JP in SU-CoMP has been proved to achieve a great link performance improvement for the cell-edge user, efficient resource allocation (RA) on the system level is quite needed. However, so far limited work has been done considering JP, and most existing schemes achieved the improvement of cell-edge performance at cost of the cell-average performance degradation compared to the single cell RA. In this paper, a two-phase strategy is proposed for SU-CoMP networks. CS and JP are combined to improve both cell-edge and cell-average performance. Compared to the single cell RA, simulation results demonstrate that, the proposed strategy leads to both higher cell-average and cell-edge throughput.