Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce d...Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce dehydration and/or aromatization to change the structure of cellulose/hemicellulose.This might interfere with evolution of structures of AC,which was investigated herein via thermal pretreatment of willow branch(WB)from 200 to 360℃and the subsequent activation with ZnCl_(2) at 550℃.The results showed that thermal pretreatment at 360℃(WB-360)could lead to substantial pyrolysis to form biochar,with a yield of 31.9%,accompanying with nearly complete destruction of cellulose crystals and remarkably enhanced aromatic degree.However,cellulose residual in WB-360 could still be activated to form AC-360 with specific surface area of 1837.9 m~2·g^(-1),which was lower than that in AC from activation of untreated WB(AC-blank,2077.8 m~2·g^(-1)).Nonetheless,the AC-200 from activation of WB-200 had more developed pores(2113.9 m~2·g^(-1))and superior capability for adsorption of phenol,due to increased permeability of ZnCl_(2) to the largely intact cellulose structure in WB-200.The thermal pretreatment did increase diameters of micropores of AC but reduced the overall yield of AC(26.8%for AC-blank versus 18.0%for AC-360),resulting from accelerated cracking but reduced intensity of condensation.In-situ infrared characterization of the activation showed that ZnCl_(2) mainly catalyzed dehydration,dehydrogenation,condensation,and aromatization but not cracking,suppressing the formation of derivatives of cellulose and lignin in bio-oil.The thermal pretreatment formed phenolic-OH and C=O with higher chemical innerness,which changed the reaction network in activation,shifting morphology of fibrous structures in AC-blank to“melting surface”in AC-200 or AC-280.展开更多
BACKGROUND Left bundle branch pacing(LBBP)is a novel pacing modality of cardiac resynchronization therapy(CRT)that achieves more physiologic native ventricular activation than biventricular pacing(BiVP).AIM To explore...BACKGROUND Left bundle branch pacing(LBBP)is a novel pacing modality of cardiac resynchronization therapy(CRT)that achieves more physiologic native ventricular activation than biventricular pacing(BiVP).AIM To explore the validity of electromechanical resynchronization,clinical and echocardiographic response of LBBP-CRT.METHODS Systematic review and Meta-analysis were conducted in accordance with the standard guidelines as mentioned in detail in the methodology section.RESULTS In our analysis,the success rate of LBBP-CRT was determined to be 91.1%.LBBP CRT significantly shortened QRS duration,with significant improvement in echocardiographic parameters,including left ventricular ejection fraction,left ventricular end-diastolic diameter and left ventricular end-systolic diameter in comparison with BiVP-CRT.CONCLUSION A significant reduction in New York Heart Association class and B-type natriuretic peptide levels was also observed in the LBBP-CRT group vs BiVP-CRT group.Lastly,the LBBP-CRT cohort had a reduced pacing threshold at follow-up as compared to BiVP-CRT.展开更多
[Objectives]To investigate the changes in soil organic matter,nitrogen and phosphorus content in the decomposition process of Korla fragrant pear branches by indoor mixed culture.[Methods]The branches of Korla fragran...[Objectives]To investigate the changes in soil organic matter,nitrogen and phosphorus content in the decomposition process of Korla fragrant pear branches by indoor mixed culture.[Methods]The branches of Korla fragrant pear in the orchard were collected and returned to the field for a period of 150 d for indoor mixed culture.[Results]Different ages of Korla fragrant pear branches have different effects on soil nutrient content during the simulated return to field decomposition process.Compared with the control in the same period,the treatment of returning to field reached a significant level(P<0.05).Compared with the control,the average values of organic matter,total nitrogen and available phosphorus content in treatment 1 and treatment 2 increased by 2.16 times and 1.93 times,61%and 59%,5.88 times and 6.88 times,respectively;compared with the control,the average increase performance of the alkaline hydrolysis nitrogen content of the two treatments was basically the same,and the treatment 2 was the best;compared with the control,the average total phosphorus content of treatment 1 and treatment 2 increased but not significantly.[Conclusions]The contents of soil organic matter,nitrogen and phosphorus were all increased during the decomposition of pear branches,and the overall improvement effect of 10-year-old trees was better than that of 5-year-old trees.Returning the pruned branches to the field can provide a reliable theoretical basis for solving the problem of organic fertilizer shortage in orchards,and also can ensure technical support for improving soil fertility and improving the rhizosphere micro-environment of pear trees.展开更多
[Objectives] To establish the quality standard of barberry branches. [Methods] Microscopic identification and thin layer identification were used to qualitatively identify barberry branches. Berberine content was dete...[Objectives] To establish the quality standard of barberry branches. [Methods] Microscopic identification and thin layer identification were used to qualitatively identify barberry branches. Berberine content was determined by HPLC method, and the content of water, total ash, acid insoluble ash and extract was detected according to the method of the Chinese Pharmacopoeia (2020 edition). [Results] The microscopic identification showed that the features were obvious, and stone cells, cork cells, epidermal cells, stomata, fibers and catheter with reticulated pores could be found. Berberine was detected in barberry branches by thin layer chromatography, and the characteristic spots were separated clearly. Moisture, total ash, and acid insoluble ash content shall not exceed 13%, 6%, and 3%, respectively, and extract content shall not be less than 10%. Berberine hydrochloride (C_(20)H_(18)ClNO_(4)) should be calculated in the branches of Berberis wilsonae Hemsley and Berberis aggregata C. K. Schneid., and berberine (C_(20)H_(17)NO_(4)) content should not be less than 0.05%. The linear relationship was good in the range of 0.002-0.240 mg/mL ( R^(2)=0.999 5). The average recovery was 89.63%, and RSD was 5.28%. [Conclusions] The method was simple, accurate and reproducible, and can be used for the quality control of barberry branches.展开更多
Left bundle branch area pacing(LBBAP)has emerged as a new physiological pacing mode.Previous studies have confirmed the feasibility and efficacy of LBBAP for cardiac resynchronization therapy(CRT)in heart failure(HF)p...Left bundle branch area pacing(LBBAP)has emerged as a new physiological pacing mode.Previous studies have confirmed the feasibility and efficacy of LBBAP for cardiac resynchronization therapy(CRT)in heart failure(HF)patients with left bundle branch block(LBBB)and a narrower QRS duration(QRSd)to have a higher percentage of super responders,and lower pacing thresholds than biventricular pacing(BiVP).展开更多
Dear Editor,I am Kunihiko Hirosawa of the Department of Ophthalmology at Juntendo University Hospital.I am writing to present a case of concomitant Coronavirus Disease 2019(COVID-19)with branch retinal artery occlusio...Dear Editor,I am Kunihiko Hirosawa of the Department of Ophthalmology at Juntendo University Hospital.I am writing to present a case of concomitant Coronavirus Disease 2019(COVID-19)with branch retinal artery occlusion(BRAO).BRAO presents as a sudden,painless loss of vision on the afflicted side and is most often focal in nature[1].展开更多
Automatic segmentation of medical images provides a reliable scientific basis for disease diagnosis and analysis.Notably,most existing methods that combine the strengths of convolutional neural networks(CNNs)and Trans...Automatic segmentation of medical images provides a reliable scientific basis for disease diagnosis and analysis.Notably,most existing methods that combine the strengths of convolutional neural networks(CNNs)and Transformers have made significant progress.However,there are some limitations in the current integration of CNN and Transformer technology in two key aspects.Firstly,most methods either overlook or fail to fully incorporate the complementary nature between local and global features.Secondly,the significance of integrating the multiscale encoder features from the dual-branch network to enhance the decoding features is often disregarded in methods that combine CNN and Transformer.To address this issue,we present a groundbreaking dual-branch cross-attention fusion network(DCFNet),which efficiently combines the power of Swin Transformer and CNN to generate complementary global and local features.We then designed the Feature Cross-Fusion(FCF)module to efficiently fuse local and global features.In the FCF,the utilization of the Channel-wise Cross-fusion Transformer(CCT)serves the purpose of aggregatingmulti-scale features,and the Feature FusionModule(FFM)is employed to effectively aggregate dual-branch prominent feature regions from the spatial perspective.Furthermore,within the decoding phase of the dual-branch network,our proposed Channel Attention Block(CAB)aims to emphasize the significance of the channel features between the up-sampled features and the features generated by the FCFmodule to enhance the details of the decoding.Experimental results demonstrate that DCFNet exhibits enhanced accuracy in segmentation performance.Compared to other state-of-the-art(SOTA)methods,our segmentation framework exhibits a superior level of competitiveness.DCFNet’s accurate segmentation of medical images can greatly assist medical professionals in making crucial diagnoses of lesion areas in advance.展开更多
Aiming at high cost and low efficiency of conventional branch bending method in the modern intensive planting and labor-saving cultivation mode of young pear trees,this paper provides a new branch bending method with ...Aiming at high cost and low efficiency of conventional branch bending method in the modern intensive planting and labor-saving cultivation mode of young pear trees,this paper provides a new branch bending method with wide source of raw materials,cheap price and simple operation,which is also suitable for the management of low-age branches in the process of high grafting and upgrading of traditional big trees.展开更多
Two major problems facing agriculture at present are soil pollution and the disposal of solid wastes generated during plant growth. The method of preparing biochar from solid wastes produced by plants is a means of ma...Two major problems facing agriculture at present are soil pollution and the disposal of solid wastes generated during plant growth. The method of preparing biochar from solid wastes produced by plants is a means of maximizing the use of resources to combat the problem of soil pollution. In this study, we did not choose straw in the traditional sense but the waste branches from grape pruning, which has higher lignin cellulose, as the raw material. The biochar derived from grape branches pyrolyzed at 300˚C for two hours was utilized as a raw material to prepare modified biochar with varying concentrations of phosphoric acid. The adsorption performance and mechanism of Cd<sup>2 </sup> were explored through experiments involving different concentrations, addition amounts, reaction times, kinetic analyses, and isothermal adsorption tests. The findings indicated that the optimal adsorption of Cd<sup>2 </sup> occurred with a 20% phosphoric acid concentration, achieving the highest adsorption rate of 84.62%. At a dosage of 10 g/L, the maximum adsorption capacity reached 7.02 mg/g. The adsorption kinetics and isothermal adsorption of Cd<sup>2 </sup> on biochar modified with 0.2% phosphoric acid (0.2 PB) closely followed the pseudo-first-order kinetics model (R<sup>2</sup> > 0.98) and the Freundlich model (R<sup>2</sup> > 0.97), respectively. This suggests that the adsorption process involves both physical and chemical mechanisms. SEM and FTIR analyses revealed that phosphoric acid modification primarily increased the biochar’s specific surface area and enhanced certain original functional groups. The adsorption process predominantly involved rapid ion diffusion and chemical adsorption, as confirmed by kinetic analysis and isothermal adsorption model analysis. In summary, the adsorption efficiency of 0.2 PB significantly improved, showing potential and feasibility for heavy metal remediation in soil. This supports the environmentally friendly concept of “treating waste with waste”.展开更多
The deleterious effects of long-term right ventricular pacing necessitated the search for alternative pacing sites which could prevent or alleviate pacinginduced cardiomyopathy.Until recently,biventricular pacing(BiVP...The deleterious effects of long-term right ventricular pacing necessitated the search for alternative pacing sites which could prevent or alleviate pacinginduced cardiomyopathy.Until recently,biventricular pacing(BiVP)was the only modality which could mitigate or prevent pacing induced dysfunction.Further,BiVP could resynchronize the baseline electromechanical dssynchrony in heart failure and improve outcomes.However,the high non-response rate of around 20%-30%remains a major limitation.This non-response has been largely attributable to the direct non-physiological stimulation of the left ventricular myocardium bypassing the conduction system.To overcome this limitation,the concept of conduction system pacing(CSP)came up.Despite initial success of the first CSP via His bundle pacing(HBP),certain drawbacks including lead instability and dislodgements,steep learning curve and rapid battery depletion on many occasions prevented its widespread use for cardiac resynchronization therapy(CRT).Subsequently,CSP via left bundle branch-area pacing(LBBP)was developed in 2018,which over the last few years has shown efficacy comparable to BiVP-CRT in small observational studies.Further,its safety has also been well established and is largely free of the pitfalls of the HBP-CRT.In the recent metanalysis by Yasmin et al,comprising of 6 studies with 389 participants,LBBPCRT was superior to BiVP-CRT in terms of QRS duration,left ventricular ejection fraction,cardiac chamber dimensions,lead thresholds,and functional status amongst heart failure patients with left bundle branch block.However,there are important limitations of the study including the small overall numbers,inclusion of only a single small randomized controlled trial(RCT)and a small follow-up duration.Further,the entire study population analyzed was from China which makes generalizability a concern.Despite the concerns,the meta-analysis adds to the growing body of evidence demonstrating the efficacy of LBBP-CRT.At this stage,one must acknowledge that the fact that still our opinions on this technique are largely based on observational data and there is a dire need for larger RCTs to ascertain the position of LBBPCRT in management of heart failure patients with left bundle branch block.展开更多
The catalysis of olefin polymerization through the chain-walking process is a subject of great interest. In this contribution, the successful synthesis of a Brookhart-type unsymmetrical α-diimine nickel catalyst Ni, ...The catalysis of olefin polymerization through the chain-walking process is a subject of great interest. In this contribution, the successful synthesis of a Brookhart-type unsymmetrical α-diimine nickel catalyst Ni, which contains both dibenzhydryl and phenyl groups, was determined by X-ray crystallography. The compound has a pseudo-tetrahedral geometry at the Ni center, showing pseudo-C2-symmetry. Upon activation with modified methylaluminoxane (MMAO), Ni1 exhibits high catalytic activity up to 1.02 × 107 g PE (mol Ni h)−1 toward ethylene polymerization, enabling the synthesis of high molecular weight branched polyethylene. The molecular weights and branching densities could be tuned over a very wide range. The polymerization results indicated the possibility of precise microstructure control, depending on the polymerization temperature. The branching densities were decreased with increasing the polymerization temperature.展开更多
Attribute reduction is a research hotspot in rough set theory. Traditional heuristic attribute reduction methods add the most important attribute to the decision attribute set each time, resulting in multiple redundan...Attribute reduction is a research hotspot in rough set theory. Traditional heuristic attribute reduction methods add the most important attribute to the decision attribute set each time, resulting in multiple redundant attribute calculations, high time consumption, and low reduction efficiency. In this paper, based on the idea of sequential three-branch decision classification domain, attributes are treated as objects of three-branch division, and attributes are divided into core attributes, relatively necessary attributes, and unnecessary attributes using attribute importance and thresholds. Core attributes are added to the decision attribute set, unnecessary attributes are rejected from being added, and relatively necessary attributes are repeatedly divided until the reduction result is obtained. Experiments were conducted on 8 groups of UCI datasets, and the results show that, compared to traditional reduction methods, the method proposed in this paper can effectively reduce time consumption while ensuring classification performance.展开更多
Roots play an important role in stabilizing and strengthening soil. This article aims to study the mechanical properties of the interface between soil and roots with branches, using the pullout test method in the labo...Roots play an important role in stabilizing and strengthening soil. This article aims to study the mechanical properties of the interface between soil and roots with branches, using the pullout test method in the laboratory. The mechanical properties of the soil-root with branches interface is determined through the pullout-force and root-slippage curve (F-S curve). The results of investigating 24 Pinus tabulaeformis single roots and 55 P. tabulaeformis roots with branches demonstrated three kinds of pullout test failures: breakage failure on branching root, breakage failure on branching node, and pullout failure. The branch angle had a remarkable effect on the failure mode of the roots with branches: the maximum pullout force increased with the sum of the branch diameters and the branch angle. The peak slippage and the initial force had a positive correlation with the sum of the branch diameter. The sig- nificance test of correlation between branch angle and the initial force, however, showed they had no correlation. Branch angle and branch root diameter affect the anchorage properties between root system and soil. Therefore, it is important to investigate the anchorage mechanics of the roots with branches to understand the mechanism of root reinforcement and anchorage.展开更多
The northwest of Jiaodong peninsula is characterized by its greatest gold concentration area, enormous gold reserves and limited time interval (115±5Ma) of gold mineralization in China. Studies show that the ea...The northwest of Jiaodong peninsula is characterized by its greatest gold concentration area, enormous gold reserves and limited time interval (115±5Ma) of gold mineralization in China. Studies show that the east area of north China began its mantle plume evolution since the Yanshanian movement, and the Laiyang sub-mantle plume and its surrounding mantle branches such as those in Guojiadian, Aishan and Panshidian were formed in the mineralization concentration area of northwestern Jiaodong peninsula. With the development of mantle plume →sub-mantle plume → mantle branch→ favorable expending structures, the deep-derived hydrothermal fluid moved up to the favorable places, such as brittle-ductile or ductile-brittle shearing zones, the internal and external contact zones of intrusions, dense fracturing zones and the contact zones between dikes and countryrocks, and concentrated into deposits. Then the gold mineralization concentration zones that are centralized on mantle branches were formed. This study takes Guojiadian mantle branch as an example to discuss their metallogenetism and conclude the metallogenetic mode.展开更多
Multiple-bud regeneration, i.e., multiple amplification, has been shown to exist in peripheral nerve regeneration. Multiple buds grow towards the distal nerve stump during proximal nerve fiber regeneration. Our previo...Multiple-bud regeneration, i.e., multiple amplification, has been shown to exist in peripheral nerve regeneration. Multiple buds grow towards the distal nerve stump during proximal nerve fiber regeneration. Our previous studies have verified the limit and validity of multiple ampli- fication of peripheral nerve regeneration using small gap sleeve bridging of small donor nerves to repair large receptor nerves in rodents. The present study sought to observe multiple ampli- fication of myelinated nerve fiber regeneration in the primate peripheral nerve. Rhesus monkey models of distal ulnar nerve defects were established and repaired using muscular branches of the right forearm pronator teres. Proximal muscular branches of the pronator teres were su- tured into the distal ulnar nerve using the small gap sleeve bridging method. At 6 months after suture, two-finger flexion and mild wrist flexion were restored in the ulnar-sided injured limbs of rhesus monkey. Neurophysiological examination showed that motor nerve conduction veloc- ity reached 22.63 _+ 6.34 m/s on the affected side of rhesus monkey. Osmium tetroxide staining demonstrated that the number of myelinated nerve fibers was 1,657 + 652 in the branches of pronator teres of donor, and 2,661 ~ 843 in the repaired ulnar nerve. The rate of multiple amplification of regenerating myelinated nerve fibers was 1.61. These data showed that when muscular branches of the pronator teres were used to repair ulnar nerve in primates, effective regeneration was observed in regenerating nerve fibers, and functions of the injured ulnar nerve were restored to a certain extent. Moreover, multiple amplification was subsequently detected in ulnar nerve axons.展开更多
Two-year field experiments were conducted at Linqing, Yellow River valley of China, to study the plant response to the removal of early fruiting branches in transgenic Bt (Bacillus thuringiensis) cotton (Gossypium ...Two-year field experiments were conducted at Linqing, Yellow River valley of China, to study the plant response to the removal of early fruiting branches in transgenic Bt (Bacillus thuringiensis) cotton (Gossypium hirsutum L.) from 2003 to 2004. Plants were undamaged and treated by removing two basal fruiting branches (FB) at squaring to form the control and the removal treatment, respectively. The plant height, leaf area (LA), dry weight of fruiting forms (DWFF), the number of fruiting nodes (NFN), photosynthetic (Pn) rate, and levels of leaf chlorophyll (Chl), N, P, K, and Cry lAc protein in main- stem leaves were measured at a 10- or 20-d interval after FB removal, and the sink/source ratio as indicated by NFN/LA and DWFF/LA was determined. FB removal significantly increased the plant height, LA, and plant biomass in both years. Lint yields were increased 7.5 and 5.2% by removal compared with their controls in 2003 and 2004, respectively. Significant increases in boll size (5.7 and 5.1%) were also observed in removal than in control for both years. Either NFN/LA or DWFF/LA was significantly reduced by removal before 40 d after removal; however, both NFN/LA and DWFF/LA were significantly enhanced by FB removal at 80 d after removal compared to the untreated control. There was no significant difference in fiber quality in the first two harvests between removal and control, but fiber strength and micronarie in the third harvest were significantly improved by FB removal. In terms of leaf Chl, Pn rate, levels of total N, P, and K in late season, leaf senescence was considerably delayed by FB removal. Levels of CrylAc protein in the fully expanded young leaves were considerably higher in FB-excised plants than in control, indicating FB removal enhanced CrylAc expression. It is suggested that the yield and quality improvement with FB removal may be attributed to the increased NFN/LA or DWFF/LA in late season and delayed leaf senescence, respectively. FB removal can be a potential practice incorporated into the intensive cultivation system for enhancing transgenic Bt cotton production.展开更多
Raising the in situ decomposition rate of natural gas hydrate and increasing the decomposition contact area are two main ways to raise the productivity of hydrate. An exploitation technique based on large borehole wit...Raising the in situ decomposition rate of natural gas hydrate and increasing the decomposition contact area are two main ways to raise the productivity of hydrate. An exploitation technique based on large borehole with multi-lateral branches (LB & MB) was proposed in this paper. This technique is mainly intended for the clayey silt hydrate reservoir in the South China Sea, and its main purpose is to alleviate the sand output from formation for maintaining the stability of the reservoir and to greatly increase the gas productivity of the reservoir. In this paper, the following aspects were mainly expounded: definition of the basic geometric parameters for layout of multi-lateral branches in clayey silt hydrate reservoir, simulation of the stimulation effect of a typical well profile with two branches, and prediction and simulation of the reservoir failure risk in a well profile with eight branches. The results show that the LB & MB effectively improves the flow field in the formation, raises the productivity of the reservoir and may also help to decrease the produced water-gas ratio (WGR). When the lateral branches spacing is too small, the failure zones around adjacent lateral branches overlap each other, possibly causing reservoir failure in a larger range. Therefore, the geometric parameters of multi-lateral branches depend on the dual control of the productivity and geotechnical risk factor of reservoir. Further study is being carried out, so as to obtain the optimal combination of parameters of multi-lateral branches.展开更多
Rotor vibration characteristics are first analyzed, which are that the rotor vibration of fundamental frequency will increase due to rotor winding inter-turn short circuit fault, air-gap dynamic eccentricity fault, or...Rotor vibration characteristics are first analyzed, which are that the rotor vibration of fundamental frequency will increase due to rotor winding inter-turn short circuit fault, air-gap dynamic eccentricity fault, or imbalance fault, and the vibration of the second frequency will increase when the air-gap static eccentricity fault occurs. Next, the characteristics of the stator winding parallel branches circulating current are analyzed, which are that the second harmonics circulating current will increase when the rotor winding inter-turn short circuit fault occurs, and the fundamental circulating current will increase when the air-gap eccentricity fault occurs, neither being strongly affected by the imbalance fault. Considering the differences of the rotor vibration and circulating current characteristics caused by different rotor faults, a method of generator vibration fault diagnosis, based on rotor vibration and circulating current characteristics, is developed. Finally, the rotor vibration and circulating current of a type SDF-9 generator is measured in the laboratory to verify the theoretical analysis presented above.展开更多
[Objectives] This study was conducted to use the feeding value of wolfberry branches and to provide a basis for the rational use of its active ingredients and nutrients and the development of new feed resources. [Meth...[Objectives] This study was conducted to use the feeding value of wolfberry branches and to provide a basis for the rational use of its active ingredients and nutrients and the development of new feed resources. [Methods] Wolfberry branches and whole-plant corn were used to make mixed silage of wolfberry branches, which replaced different proportions of whole-plant corn silage for feeding hybrid mutton sheep, and the feeding effect of the mixed silage of wolfberry branches on hybrid mutton sheep was analyzed, which provides a technical basis for rational utilization of mulberry resources to ruminants. A single factor feeding comparison experiment was carried out. 32 hybrid mutton sheep of 8 months old with conform gender, age, body weight, physiological state and feeding management level were selected and divided into two groups, 16 in each group. [Results] The gross output value of weight gain of the experimental group was 18.06 yuan, which was higher than the CK(12.97 yuan) by 5.09 yuan. [Conclusions] The addition of the mixed silage of wolfberry branches to the diet had a positive effect on the increase of the weight gain of the hybrid mutton sheep and the reduction of the feed conversion ratio compared with the single whole-plant corn silage.展开更多
In this study,magnetohydrodynamic(MHD)three-dimensional(3D)flow of alumina(Al2O3)and copper(Cu)nanoparticles of an electrically conducting incompressible fluid in a rotating frame has been investigated.The shrinking s...In this study,magnetohydrodynamic(MHD)three-dimensional(3D)flow of alumina(Al2O3)and copper(Cu)nanoparticles of an electrically conducting incompressible fluid in a rotating frame has been investigated.The shrinking surface generates the flow that also has been examined.The single-phase(i.e.,Tiwari and Das)model is implemented for the hybrid nanofluid transport phenomena.Results for alumina and copper nanomaterials in the water base fluid are achieved.Boundary layer approximations are used to reduce governing partial differential(PDEs)system into the system of the ordinary differential equations(ODEs).The three-stage Lobatto IIIa method in bvp4c solver is applied for solutions of the governing model.Graphical results have been shown to examine how velocity and temperature fields are influenced by various applied parameters.It has been found that there are two branches for certain values of the suction/injection parameter b:The rise in copper volumetric concentration improved the velocity of hybrid nanofluid in the upper branch.The heat transfer rate improved for the case of hybrid nanofluid as compared to the viscous fluid and simple nanofluid.展开更多
基金supported by the National Natural Science Foundation of China(52276195)Program for Supporting Innovative Research from Jinan(202228072)Program of Agricultural Development from Shandong(SD2019NJ015)。
文摘Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce dehydration and/or aromatization to change the structure of cellulose/hemicellulose.This might interfere with evolution of structures of AC,which was investigated herein via thermal pretreatment of willow branch(WB)from 200 to 360℃and the subsequent activation with ZnCl_(2) at 550℃.The results showed that thermal pretreatment at 360℃(WB-360)could lead to substantial pyrolysis to form biochar,with a yield of 31.9%,accompanying with nearly complete destruction of cellulose crystals and remarkably enhanced aromatic degree.However,cellulose residual in WB-360 could still be activated to form AC-360 with specific surface area of 1837.9 m~2·g^(-1),which was lower than that in AC from activation of untreated WB(AC-blank,2077.8 m~2·g^(-1)).Nonetheless,the AC-200 from activation of WB-200 had more developed pores(2113.9 m~2·g^(-1))and superior capability for adsorption of phenol,due to increased permeability of ZnCl_(2) to the largely intact cellulose structure in WB-200.The thermal pretreatment did increase diameters of micropores of AC but reduced the overall yield of AC(26.8%for AC-blank versus 18.0%for AC-360),resulting from accelerated cracking but reduced intensity of condensation.In-situ infrared characterization of the activation showed that ZnCl_(2) mainly catalyzed dehydration,dehydrogenation,condensation,and aromatization but not cracking,suppressing the formation of derivatives of cellulose and lignin in bio-oil.The thermal pretreatment formed phenolic-OH and C=O with higher chemical innerness,which changed the reaction network in activation,shifting morphology of fibrous structures in AC-blank to“melting surface”in AC-200 or AC-280.
文摘BACKGROUND Left bundle branch pacing(LBBP)is a novel pacing modality of cardiac resynchronization therapy(CRT)that achieves more physiologic native ventricular activation than biventricular pacing(BiVP).AIM To explore the validity of electromechanical resynchronization,clinical and echocardiographic response of LBBP-CRT.METHODS Systematic review and Meta-analysis were conducted in accordance with the standard guidelines as mentioned in detail in the methodology section.RESULTS In our analysis,the success rate of LBBP-CRT was determined to be 91.1%.LBBP CRT significantly shortened QRS duration,with significant improvement in echocardiographic parameters,including left ventricular ejection fraction,left ventricular end-diastolic diameter and left ventricular end-systolic diameter in comparison with BiVP-CRT.CONCLUSION A significant reduction in New York Heart Association class and B-type natriuretic peptide levels was also observed in the LBBP-CRT group vs BiVP-CRT group.Lastly,the LBBP-CRT cohort had a reduced pacing threshold at follow-up as compared to BiVP-CRT.
基金Supported by Key R&D Program of Hainan Province in 2021(ZDYF2021XDNY152).
文摘[Objectives]To investigate the changes in soil organic matter,nitrogen and phosphorus content in the decomposition process of Korla fragrant pear branches by indoor mixed culture.[Methods]The branches of Korla fragrant pear in the orchard were collected and returned to the field for a period of 150 d for indoor mixed culture.[Results]Different ages of Korla fragrant pear branches have different effects on soil nutrient content during the simulated return to field decomposition process.Compared with the control in the same period,the treatment of returning to field reached a significant level(P<0.05).Compared with the control,the average values of organic matter,total nitrogen and available phosphorus content in treatment 1 and treatment 2 increased by 2.16 times and 1.93 times,61%and 59%,5.88 times and 6.88 times,respectively;compared with the control,the average increase performance of the alkaline hydrolysis nitrogen content of the two treatments was basically the same,and the treatment 2 was the best;compared with the control,the average total phosphorus content of treatment 1 and treatment 2 increased but not significantly.[Conclusions]The contents of soil organic matter,nitrogen and phosphorus were all increased during the decomposition of pear branches,and the overall improvement effect of 10-year-old trees was better than that of 5-year-old trees.Returning the pruned branches to the field can provide a reliable theoretical basis for solving the problem of organic fertilizer shortage in orchards,and also can ensure technical support for improving soil fertility and improving the rhizosphere micro-environment of pear trees.
基金Supported by the National Key Research and Development Plan(2018YFC-06101)Sichuan Provincial Natural Science Foundation(2022NSFSC1605)+2 种基金Traditional Chinese Medicine(Ethnic Medicine)Standard Improvement of Sichuan Medical Products Administration(510201202102305)Leading Talents Support Plan of National Ethnic Affairs Commission in 2022Special Project for the University-Level Innovation Team in the Fundamental Research Funds for the Central Universities(ZYN2022067).
文摘[Objectives] To establish the quality standard of barberry branches. [Methods] Microscopic identification and thin layer identification were used to qualitatively identify barberry branches. Berberine content was determined by HPLC method, and the content of water, total ash, acid insoluble ash and extract was detected according to the method of the Chinese Pharmacopoeia (2020 edition). [Results] The microscopic identification showed that the features were obvious, and stone cells, cork cells, epidermal cells, stomata, fibers and catheter with reticulated pores could be found. Berberine was detected in barberry branches by thin layer chromatography, and the characteristic spots were separated clearly. Moisture, total ash, and acid insoluble ash content shall not exceed 13%, 6%, and 3%, respectively, and extract content shall not be less than 10%. Berberine hydrochloride (C_(20)H_(18)ClNO_(4)) should be calculated in the branches of Berberis wilsonae Hemsley and Berberis aggregata C. K. Schneid., and berberine (C_(20)H_(17)NO_(4)) content should not be less than 0.05%. The linear relationship was good in the range of 0.002-0.240 mg/mL ( R^(2)=0.999 5). The average recovery was 89.63%, and RSD was 5.28%. [Conclusions] The method was simple, accurate and reproducible, and can be used for the quality control of barberry branches.
文摘Left bundle branch area pacing(LBBAP)has emerged as a new physiological pacing mode.Previous studies have confirmed the feasibility and efficacy of LBBAP for cardiac resynchronization therapy(CRT)in heart failure(HF)patients with left bundle branch block(LBBB)and a narrower QRS duration(QRSd)to have a higher percentage of super responders,and lower pacing thresholds than biventricular pacing(BiVP).
文摘Dear Editor,I am Kunihiko Hirosawa of the Department of Ophthalmology at Juntendo University Hospital.I am writing to present a case of concomitant Coronavirus Disease 2019(COVID-19)with branch retinal artery occlusion(BRAO).BRAO presents as a sudden,painless loss of vision on the afflicted side and is most often focal in nature[1].
基金supported by the National Key R&D Program of China(2018AAA0102100)the National Natural Science Foundation of China(No.62376287)+3 种基金the International Science and Technology Innovation Joint Base of Machine Vision and Medical Image Processing in Hunan Province(2021CB1013)the Key Research and Development Program of Hunan Province(2022SK2054)the Natural Science Foundation of Hunan Province(No.2022JJ30762,2023JJ70016)the 111 Project under Grant(No.B18059).
文摘Automatic segmentation of medical images provides a reliable scientific basis for disease diagnosis and analysis.Notably,most existing methods that combine the strengths of convolutional neural networks(CNNs)and Transformers have made significant progress.However,there are some limitations in the current integration of CNN and Transformer technology in two key aspects.Firstly,most methods either overlook or fail to fully incorporate the complementary nature between local and global features.Secondly,the significance of integrating the multiscale encoder features from the dual-branch network to enhance the decoding features is often disregarded in methods that combine CNN and Transformer.To address this issue,we present a groundbreaking dual-branch cross-attention fusion network(DCFNet),which efficiently combines the power of Swin Transformer and CNN to generate complementary global and local features.We then designed the Feature Cross-Fusion(FCF)module to efficiently fuse local and global features.In the FCF,the utilization of the Channel-wise Cross-fusion Transformer(CCT)serves the purpose of aggregatingmulti-scale features,and the Feature FusionModule(FFM)is employed to effectively aggregate dual-branch prominent feature regions from the spatial perspective.Furthermore,within the decoding phase of the dual-branch network,our proposed Channel Attention Block(CAB)aims to emphasize the significance of the channel features between the up-sampled features and the features generated by the FCFmodule to enhance the details of the decoding.Experimental results demonstrate that DCFNet exhibits enhanced accuracy in segmentation performance.Compared to other state-of-the-art(SOTA)methods,our segmentation framework exhibits a superior level of competitiveness.DCFNet’s accurate segmentation of medical images can greatly assist medical professionals in making crucial diagnoses of lesion areas in advance.
基金Technology Innovation Special Project of Hebei Academy of Agriculture and Forestry Sciences(2022KJCXZX-CGS-7,2023KJCXZX-CGS-11)Key Research and Development Program of Hebei Province(21326308D-1-2)+1 种基金Hebei Agriculture Research System(HBCT2024170406)China Agricultural(Pear)Research System(CARS-28-27).
文摘Aiming at high cost and low efficiency of conventional branch bending method in the modern intensive planting and labor-saving cultivation mode of young pear trees,this paper provides a new branch bending method with wide source of raw materials,cheap price and simple operation,which is also suitable for the management of low-age branches in the process of high grafting and upgrading of traditional big trees.
文摘Two major problems facing agriculture at present are soil pollution and the disposal of solid wastes generated during plant growth. The method of preparing biochar from solid wastes produced by plants is a means of maximizing the use of resources to combat the problem of soil pollution. In this study, we did not choose straw in the traditional sense but the waste branches from grape pruning, which has higher lignin cellulose, as the raw material. The biochar derived from grape branches pyrolyzed at 300˚C for two hours was utilized as a raw material to prepare modified biochar with varying concentrations of phosphoric acid. The adsorption performance and mechanism of Cd<sup>2 </sup> were explored through experiments involving different concentrations, addition amounts, reaction times, kinetic analyses, and isothermal adsorption tests. The findings indicated that the optimal adsorption of Cd<sup>2 </sup> occurred with a 20% phosphoric acid concentration, achieving the highest adsorption rate of 84.62%. At a dosage of 10 g/L, the maximum adsorption capacity reached 7.02 mg/g. The adsorption kinetics and isothermal adsorption of Cd<sup>2 </sup> on biochar modified with 0.2% phosphoric acid (0.2 PB) closely followed the pseudo-first-order kinetics model (R<sup>2</sup> > 0.98) and the Freundlich model (R<sup>2</sup> > 0.97), respectively. This suggests that the adsorption process involves both physical and chemical mechanisms. SEM and FTIR analyses revealed that phosphoric acid modification primarily increased the biochar’s specific surface area and enhanced certain original functional groups. The adsorption process predominantly involved rapid ion diffusion and chemical adsorption, as confirmed by kinetic analysis and isothermal adsorption model analysis. In summary, the adsorption efficiency of 0.2 PB significantly improved, showing potential and feasibility for heavy metal remediation in soil. This supports the environmentally friendly concept of “treating waste with waste”.
文摘The deleterious effects of long-term right ventricular pacing necessitated the search for alternative pacing sites which could prevent or alleviate pacinginduced cardiomyopathy.Until recently,biventricular pacing(BiVP)was the only modality which could mitigate or prevent pacing induced dysfunction.Further,BiVP could resynchronize the baseline electromechanical dssynchrony in heart failure and improve outcomes.However,the high non-response rate of around 20%-30%remains a major limitation.This non-response has been largely attributable to the direct non-physiological stimulation of the left ventricular myocardium bypassing the conduction system.To overcome this limitation,the concept of conduction system pacing(CSP)came up.Despite initial success of the first CSP via His bundle pacing(HBP),certain drawbacks including lead instability and dislodgements,steep learning curve and rapid battery depletion on many occasions prevented its widespread use for cardiac resynchronization therapy(CRT).Subsequently,CSP via left bundle branch-area pacing(LBBP)was developed in 2018,which over the last few years has shown efficacy comparable to BiVP-CRT in small observational studies.Further,its safety has also been well established and is largely free of the pitfalls of the HBP-CRT.In the recent metanalysis by Yasmin et al,comprising of 6 studies with 389 participants,LBBPCRT was superior to BiVP-CRT in terms of QRS duration,left ventricular ejection fraction,cardiac chamber dimensions,lead thresholds,and functional status amongst heart failure patients with left bundle branch block.However,there are important limitations of the study including the small overall numbers,inclusion of only a single small randomized controlled trial(RCT)and a small follow-up duration.Further,the entire study population analyzed was from China which makes generalizability a concern.Despite the concerns,the meta-analysis adds to the growing body of evidence demonstrating the efficacy of LBBP-CRT.At this stage,one must acknowledge that the fact that still our opinions on this technique are largely based on observational data and there is a dire need for larger RCTs to ascertain the position of LBBPCRT in management of heart failure patients with left bundle branch block.
文摘The catalysis of olefin polymerization through the chain-walking process is a subject of great interest. In this contribution, the successful synthesis of a Brookhart-type unsymmetrical α-diimine nickel catalyst Ni, which contains both dibenzhydryl and phenyl groups, was determined by X-ray crystallography. The compound has a pseudo-tetrahedral geometry at the Ni center, showing pseudo-C2-symmetry. Upon activation with modified methylaluminoxane (MMAO), Ni1 exhibits high catalytic activity up to 1.02 × 107 g PE (mol Ni h)−1 toward ethylene polymerization, enabling the synthesis of high molecular weight branched polyethylene. The molecular weights and branching densities could be tuned over a very wide range. The polymerization results indicated the possibility of precise microstructure control, depending on the polymerization temperature. The branching densities were decreased with increasing the polymerization temperature.
文摘Attribute reduction is a research hotspot in rough set theory. Traditional heuristic attribute reduction methods add the most important attribute to the decision attribute set each time, resulting in multiple redundant attribute calculations, high time consumption, and low reduction efficiency. In this paper, based on the idea of sequential three-branch decision classification domain, attributes are treated as objects of three-branch division, and attributes are divided into core attributes, relatively necessary attributes, and unnecessary attributes using attribute importance and thresholds. Core attributes are added to the decision attribute set, unnecessary attributes are rejected from being added, and relatively necessary attributes are repeatedly divided until the reduction result is obtained. Experiments were conducted on 8 groups of UCI datasets, and the results show that, compared to traditional reduction methods, the method proposed in this paper can effectively reduce time consumption while ensuring classification performance.
基金financially supported by the Fundamental Research Funds for the Central Universities(No.YX2010-20)the National Natural Science Foundation of China(No.31570708,No.30901162)the Open Projects Foundation of Key Laboratory of Soil and Water Conservation&Desertification Combat(Beijing Forestry University),Ministry of Education of China(No.201002)
文摘Roots play an important role in stabilizing and strengthening soil. This article aims to study the mechanical properties of the interface between soil and roots with branches, using the pullout test method in the laboratory. The mechanical properties of the soil-root with branches interface is determined through the pullout-force and root-slippage curve (F-S curve). The results of investigating 24 Pinus tabulaeformis single roots and 55 P. tabulaeformis roots with branches demonstrated three kinds of pullout test failures: breakage failure on branching root, breakage failure on branching node, and pullout failure. The branch angle had a remarkable effect on the failure mode of the roots with branches: the maximum pullout force increased with the sum of the branch diameters and the branch angle. The peak slippage and the initial force had a positive correlation with the sum of the branch diameter. The sig- nificance test of correlation between branch angle and the initial force, however, showed they had no correlation. Branch angle and branch root diameter affect the anchorage properties between root system and soil. Therefore, it is important to investigate the anchorage mechanics of the roots with branches to understand the mechanism of root reinforcement and anchorage.
基金financially supported by "Key Laboratory of Gold Mineralization Processes and Resource Utilization Subordinated to the Ministry of Land and Resources (2013001)", "Key Laboratory of Metallogenic Geological Process and Resources Utilization in Shandong Province (2013001)""the Scientific Base Research Program of China’s Typical Metallic Ore Deposits (200911007)"
文摘The northwest of Jiaodong peninsula is characterized by its greatest gold concentration area, enormous gold reserves and limited time interval (115±5Ma) of gold mineralization in China. Studies show that the east area of north China began its mantle plume evolution since the Yanshanian movement, and the Laiyang sub-mantle plume and its surrounding mantle branches such as those in Guojiadian, Aishan and Panshidian were formed in the mineralization concentration area of northwestern Jiaodong peninsula. With the development of mantle plume →sub-mantle plume → mantle branch→ favorable expending structures, the deep-derived hydrothermal fluid moved up to the favorable places, such as brittle-ductile or ductile-brittle shearing zones, the internal and external contact zones of intrusions, dense fracturing zones and the contact zones between dikes and countryrocks, and concentrated into deposits. Then the gold mineralization concentration zones that are centralized on mantle branches were formed. This study takes Guojiadian mantle branch as an example to discuss their metallogenetism and conclude the metallogenetic mode.
基金supported by grants from the National Program on Key Basic Research Project of China(973 Program),No.2014CB542200the National Natural Science Foundation of China,No.31271284,81171146,31100860+1 种基金Program for Innovative Research Team in University of Ministry of Education of China,No.IRT1201the Natural Science Foundation of Beijing of China,No.7142164
文摘Multiple-bud regeneration, i.e., multiple amplification, has been shown to exist in peripheral nerve regeneration. Multiple buds grow towards the distal nerve stump during proximal nerve fiber regeneration. Our previous studies have verified the limit and validity of multiple ampli- fication of peripheral nerve regeneration using small gap sleeve bridging of small donor nerves to repair large receptor nerves in rodents. The present study sought to observe multiple ampli- fication of myelinated nerve fiber regeneration in the primate peripheral nerve. Rhesus monkey models of distal ulnar nerve defects were established and repaired using muscular branches of the right forearm pronator teres. Proximal muscular branches of the pronator teres were su- tured into the distal ulnar nerve using the small gap sleeve bridging method. At 6 months after suture, two-finger flexion and mild wrist flexion were restored in the ulnar-sided injured limbs of rhesus monkey. Neurophysiological examination showed that motor nerve conduction veloc- ity reached 22.63 _+ 6.34 m/s on the affected side of rhesus monkey. Osmium tetroxide staining demonstrated that the number of myelinated nerve fibers was 1,657 + 652 in the branches of pronator teres of donor, and 2,661 ~ 843 in the repaired ulnar nerve. The rate of multiple amplification of regenerating myelinated nerve fibers was 1.61. These data showed that when muscular branches of the pronator teres were used to repair ulnar nerve in primates, effective regeneration was observed in regenerating nerve fibers, and functions of the injured ulnar nerve were restored to a certain extent. Moreover, multiple amplification was subsequently detected in ulnar nerve axons.
文摘Two-year field experiments were conducted at Linqing, Yellow River valley of China, to study the plant response to the removal of early fruiting branches in transgenic Bt (Bacillus thuringiensis) cotton (Gossypium hirsutum L.) from 2003 to 2004. Plants were undamaged and treated by removing two basal fruiting branches (FB) at squaring to form the control and the removal treatment, respectively. The plant height, leaf area (LA), dry weight of fruiting forms (DWFF), the number of fruiting nodes (NFN), photosynthetic (Pn) rate, and levels of leaf chlorophyll (Chl), N, P, K, and Cry lAc protein in main- stem leaves were measured at a 10- or 20-d interval after FB removal, and the sink/source ratio as indicated by NFN/LA and DWFF/LA was determined. FB removal significantly increased the plant height, LA, and plant biomass in both years. Lint yields were increased 7.5 and 5.2% by removal compared with their controls in 2003 and 2004, respectively. Significant increases in boll size (5.7 and 5.1%) were also observed in removal than in control for both years. Either NFN/LA or DWFF/LA was significantly reduced by removal before 40 d after removal; however, both NFN/LA and DWFF/LA were significantly enhanced by FB removal at 80 d after removal compared to the untreated control. There was no significant difference in fiber quality in the first two harvests between removal and control, but fiber strength and micronarie in the third harvest were significantly improved by FB removal. In terms of leaf Chl, Pn rate, levels of total N, P, and K in late season, leaf senescence was considerably delayed by FB removal. Levels of CrylAc protein in the fully expanded young leaves were considerably higher in FB-excised plants than in control, indicating FB removal enhanced CrylAc expression. It is suggested that the yield and quality improvement with FB removal may be attributed to the increased NFN/LA or DWFF/LA in late season and delayed leaf senescence, respectively. FB removal can be a potential practice incorporated into the intensive cultivation system for enhancing transgenic Bt cotton production.
基金This research was supported by Project of Distinguished Experts of Taishan Scholars (ts201712079)Youth Foundation of National Natural Science Foundation of China (41606078)+1 种基金Open Foundation of Pilot National Laboratory for Marine Science and Technology (QNLM2016ORP0207)Marine Geological Survey Program (DD20190231). Anonymous reviewers and Dr. Hao Zi-guo and Dr. Yang Yan were grateful for their constructive suggestions on the manuscript.
文摘Raising the in situ decomposition rate of natural gas hydrate and increasing the decomposition contact area are two main ways to raise the productivity of hydrate. An exploitation technique based on large borehole with multi-lateral branches (LB & MB) was proposed in this paper. This technique is mainly intended for the clayey silt hydrate reservoir in the South China Sea, and its main purpose is to alleviate the sand output from formation for maintaining the stability of the reservoir and to greatly increase the gas productivity of the reservoir. In this paper, the following aspects were mainly expounded: definition of the basic geometric parameters for layout of multi-lateral branches in clayey silt hydrate reservoir, simulation of the stimulation effect of a typical well profile with two branches, and prediction and simulation of the reservoir failure risk in a well profile with eight branches. The results show that the LB & MB effectively improves the flow field in the formation, raises the productivity of the reservoir and may also help to decrease the produced water-gas ratio (WGR). When the lateral branches spacing is too small, the failure zones around adjacent lateral branches overlap each other, possibly causing reservoir failure in a larger range. Therefore, the geometric parameters of multi-lateral branches depend on the dual control of the productivity and geotechnical risk factor of reservoir. Further study is being carried out, so as to obtain the optimal combination of parameters of multi-lateral branches.
基金This project is supported by Provincial Science Foundation of Education Office of Hebei(No.Z2004455)Youth Research Fundation of State Power of China(No.SPQKJ02-10).
文摘Rotor vibration characteristics are first analyzed, which are that the rotor vibration of fundamental frequency will increase due to rotor winding inter-turn short circuit fault, air-gap dynamic eccentricity fault, or imbalance fault, and the vibration of the second frequency will increase when the air-gap static eccentricity fault occurs. Next, the characteristics of the stator winding parallel branches circulating current are analyzed, which are that the second harmonics circulating current will increase when the rotor winding inter-turn short circuit fault occurs, and the fundamental circulating current will increase when the air-gap eccentricity fault occurs, neither being strongly affected by the imbalance fault. Considering the differences of the rotor vibration and circulating current characteristics caused by different rotor faults, a method of generator vibration fault diagnosis, based on rotor vibration and circulating current characteristics, is developed. Finally, the rotor vibration and circulating current of a type SDF-9 generator is measured in the laboratory to verify the theoretical analysis presented above.
基金Supported by Ningxia Key R&D Program(2019BBF02016)Special Fund for Agricultural Science and Technology Independent Innovation of Ningxia Academy of Agriculture and Forestry Sciences
文摘[Objectives] This study was conducted to use the feeding value of wolfberry branches and to provide a basis for the rational use of its active ingredients and nutrients and the development of new feed resources. [Methods] Wolfberry branches and whole-plant corn were used to make mixed silage of wolfberry branches, which replaced different proportions of whole-plant corn silage for feeding hybrid mutton sheep, and the feeding effect of the mixed silage of wolfberry branches on hybrid mutton sheep was analyzed, which provides a technical basis for rational utilization of mulberry resources to ruminants. A single factor feeding comparison experiment was carried out. 32 hybrid mutton sheep of 8 months old with conform gender, age, body weight, physiological state and feeding management level were selected and divided into two groups, 16 in each group. [Results] The gross output value of weight gain of the experimental group was 18.06 yuan, which was higher than the CK(12.97 yuan) by 5.09 yuan. [Conclusions] The addition of the mixed silage of wolfberry branches to the diet had a positive effect on the increase of the weight gain of the hybrid mutton sheep and the reduction of the feed conversion ratio compared with the single whole-plant corn silage.
基金Researchers Supporting Project number(RSP-2020/33),King Saud University,Riyadh,Saudi ArabiaThis research is also supported by Universiti Utara Malaysia。
文摘In this study,magnetohydrodynamic(MHD)three-dimensional(3D)flow of alumina(Al2O3)and copper(Cu)nanoparticles of an electrically conducting incompressible fluid in a rotating frame has been investigated.The shrinking surface generates the flow that also has been examined.The single-phase(i.e.,Tiwari and Das)model is implemented for the hybrid nanofluid transport phenomena.Results for alumina and copper nanomaterials in the water base fluid are achieved.Boundary layer approximations are used to reduce governing partial differential(PDEs)system into the system of the ordinary differential equations(ODEs).The three-stage Lobatto IIIa method in bvp4c solver is applied for solutions of the governing model.Graphical results have been shown to examine how velocity and temperature fields are influenced by various applied parameters.It has been found that there are two branches for certain values of the suction/injection parameter b:The rise in copper volumetric concentration improved the velocity of hybrid nanofluid in the upper branch.The heat transfer rate improved for the case of hybrid nanofluid as compared to the viscous fluid and simple nanofluid.