An 8×10 GHz receiver optical sub-assembly （ROSA） consisting of an 8-channel arrayed waveguide grating （AWG） and an 8-channel PIN photodetector （PD） array is designed and fabricated based on silica hybrid in...An 8×10 GHz receiver optical sub-assembly （ROSA） consisting of an 8-channel arrayed waveguide grating （AWG） and an 8-channel PIN photodetector （PD） array is designed and fabricated based on silica hybrid integration technology. Multimode output waveguides in the silica AWG with 2% refractive index difference are used to obtain fiat-top spectra. The output waveguide facet is polished to 45° bevel to change the light propagation direction into the mesa-type PIN PD, which simplifies the packaging process. The experimentM results show that the single channel I dB bandwidth of AWG ranges from 2.12nm to 3.06nm, the ROSA responsivity ranges from 0.097 A/W to 0.158A/W, and the 3dB bandwidth is up to 11 GHz. It is promising to be applied in the eight-lane WDM transmission system in data center interconnection.展开更多
The choice of the sequence in which parts or subass em blies are put together in the mechanical assembly of a product can drastical ly affect the efficiency of the assembly process. Unlike metal cutting operation s wh...The choice of the sequence in which parts or subass em blies are put together in the mechanical assembly of a product can drastical ly affect the efficiency of the assembly process. Unlike metal cutting operation s where computer aided system have been available for some 15 to 25 years to hel p manufacturing engineers in generating cutting sequences and NC programs, the m ajority of assembly planning tasks in automobile body design is still manually p erformed by assembly designers according to their past experiences. This has prolonged the production lead time and time to market. This paper describes a p rocedure to automatically derive all the feasible assembly sequences for automob ile body assembly. The procedure is based on a mathematical model of the automob ile body, obtained through the definitions of the connection matrix and contract ed matrix. These two matrices represent the precedence constraint knowledge amon g components and subassemblies. The possible subassemblies are automatically det ected by satisfying some mathematical conditions applicable to these matrices. F or each subassembly and the whole product, all the possible assembly sequences a re generated by rearranging the initial connection sub-matrix and the contracte d matrix. The procedure is applicable to compliant component assemblies, suc h as the automobile body assembly, aircraft frame assembly, and can solve the "combinatorial explosion" problem efficiently.展开更多
Based on the hybrid integration technology, an ultra-compact and low cost transmitter optical subassembly module is proposed. Four directly modulated lasers are combined with a coarse wavelength division multiplexer o...Based on the hybrid integration technology, an ultra-compact and low cost transmitter optical subassembly module is proposed. Four directly modulated lasers are combined with a coarse wavelength division multiplexer operated at the O-band. The bandwidth for all channels is measured to be approximately 3 GHz. The 112 Gb∕s transmission is experimentally demonstrated for a 10 km standard single mode fiber（SSMF）, in which an optical isolator is used for avoiding the back-reflected and scattered light to improve the bit error rate（BER） performance. A low BER and clear eye opening are achieved for 10 km transmission.展开更多
The establishment of an elastostatic stiffness model for over constrained parallel manipulators(PMs),particularly those with over constrained subclosed loops,poses a challenge while ensuring numerical stability.This s...The establishment of an elastostatic stiffness model for over constrained parallel manipulators(PMs),particularly those with over constrained subclosed loops,poses a challenge while ensuring numerical stability.This study addresses this issue by proposing a systematic elastostatic stiffness model based on matrix structural analysis(MSA)and independent displacement coordinates(IDCs)extraction techniques.To begin,the closed-loop PM is transformed into an open-loop PM by eliminating constraints.A subassembly element is then introduced,which considers the flexibility of both rods and joints.This approach helps circumvent the numerical instability typically encountered with traditional constraint equations.The IDCs and analytical constraint equations of nodes constrained by various joints are summarized in the appendix,utilizing multipoint constraint theory and singularity analysis,all unified within a single coordinate frame.Subsequently,the open-loop mechanism is efficiently closed by referencing the constraint equations presented in the appendix,alongside its elastostatic model.The proposed method proves to be both modeling and computationally efficient due to the comprehensive summary of the constraint equations in the Appendix,eliminating the need for additional equations.An example utilizing an over constrained subclosed loops demonstrate the application of the proposed method.In conclusion,the model proposed in this study enriches the theory of elastostatic stiffness modeling of PMs and provides an effective solution for stiffness modeling challenges they present.展开更多
The design and fabrication of a compact and low-cost 4×25-Gb/s transmitter optical sub-assembly(TOSA) and receiver optical sub-assembly(ROSA) using a hybrid integrated technique are reported. TOSA and ROSA are de...The design and fabrication of a compact and low-cost 4×25-Gb/s transmitter optical sub-assembly(TOSA) and receiver optical sub-assembly(ROSA) using a hybrid integrated technique are reported. TOSA and ROSA are developed without thermoelectric cooler for coarse wavelength division multiplexing applications. Physical dimension of the packaged optical subassembly is limited to 11.5 mm×5.4 mm×5.4 mm. The design of TOSA and ROSA is employed using a silica-based arrayed waveguide grating chip to select the specific channel wavelength at O-band. In TOSA, the wavelength of four 1.3-μm discrete directly modulated laser chips is well controlled based on the reconstruction equivalent chirp technique. In the back-to-back transmission test, bit error rates for all lanes of cascade of the TOSA and ROSA are small. A clear opening eye diagram is obtained.展开更多
基金Supported by the National High Technology Research and Development Program of China under Grant No 2015AA016902the National Natural Science Foundation of China under Grant Nos 61435013 and 61405188the K.C.Wong Education Foundation
文摘An 8×10 GHz receiver optical sub-assembly （ROSA） consisting of an 8-channel arrayed waveguide grating （AWG） and an 8-channel PIN photodetector （PD） array is designed and fabricated based on silica hybrid integration technology. Multimode output waveguides in the silica AWG with 2% refractive index difference are used to obtain fiat-top spectra. The output waveguide facet is polished to 45° bevel to change the light propagation direction into the mesa-type PIN PD, which simplifies the packaging process. The experimentM results show that the single channel I dB bandwidth of AWG ranges from 2.12nm to 3.06nm, the ROSA responsivity ranges from 0.097 A/W to 0.158A/W, and the 3dB bandwidth is up to 11 GHz. It is promising to be applied in the eight-lane WDM transmission system in data center interconnection.
文摘The choice of the sequence in which parts or subass em blies are put together in the mechanical assembly of a product can drastical ly affect the efficiency of the assembly process. Unlike metal cutting operation s where computer aided system have been available for some 15 to 25 years to hel p manufacturing engineers in generating cutting sequences and NC programs, the m ajority of assembly planning tasks in automobile body design is still manually p erformed by assembly designers according to their past experiences. This has prolonged the production lead time and time to market. This paper describes a p rocedure to automatically derive all the feasible assembly sequences for automob ile body assembly. The procedure is based on a mathematical model of the automob ile body, obtained through the definitions of the connection matrix and contract ed matrix. These two matrices represent the precedence constraint knowledge amon g components and subassemblies. The possible subassemblies are automatically det ected by satisfying some mathematical conditions applicable to these matrices. F or each subassembly and the whole product, all the possible assembly sequences a re generated by rearranging the initial connection sub-matrix and the contracte d matrix. The procedure is applicable to compliant component assemblies, suc h as the automobile body assembly, aircraft frame assembly, and can solve the "combinatorial explosion" problem efficiently.
基金supported by the National Natural Science Foundation of China(NSFC)(Nos.61575186,61635001,61727815,and 61625504)
文摘Based on the hybrid integration technology, an ultra-compact and low cost transmitter optical subassembly module is proposed. Four directly modulated lasers are combined with a coarse wavelength division multiplexer operated at the O-band. The bandwidth for all channels is measured to be approximately 3 GHz. The 112 Gb∕s transmission is experimentally demonstrated for a 10 km standard single mode fiber（SSMF）, in which an optical isolator is used for avoiding the back-reflected and scattered light to improve the bit error rate（BER） performance. A low BER and clear eye opening are achieved for 10 km transmission.
基金Supported by National Natural Science Foundation of China (Grant No.52275036)Key Research and Development Project of the Jiaxing Science and Technology Bureau (Grant No.2022BZ10004)。
文摘The establishment of an elastostatic stiffness model for over constrained parallel manipulators(PMs),particularly those with over constrained subclosed loops,poses a challenge while ensuring numerical stability.This study addresses this issue by proposing a systematic elastostatic stiffness model based on matrix structural analysis(MSA)and independent displacement coordinates(IDCs)extraction techniques.To begin,the closed-loop PM is transformed into an open-loop PM by eliminating constraints.A subassembly element is then introduced,which considers the flexibility of both rods and joints.This approach helps circumvent the numerical instability typically encountered with traditional constraint equations.The IDCs and analytical constraint equations of nodes constrained by various joints are summarized in the appendix,utilizing multipoint constraint theory and singularity analysis,all unified within a single coordinate frame.Subsequently,the open-loop mechanism is efficiently closed by referencing the constraint equations presented in the appendix,alongside its elastostatic model.The proposed method proves to be both modeling and computationally efficient due to the comprehensive summary of the constraint equations in the Appendix,eliminating the need for additional equations.An example utilizing an over constrained subclosed loops demonstrate the application of the proposed method.In conclusion,the model proposed in this study enriches the theory of elastostatic stiffness modeling of PMs and provides an effective solution for stiffness modeling challenges they present.
基金Project supported by the National Natural Science Foundation of China(Nos.61635001 and 61575186)the National High-Tech R&D Program of China(863 Program)(No.2013AA014201)
文摘The design and fabrication of a compact and low-cost 4×25-Gb/s transmitter optical sub-assembly(TOSA) and receiver optical sub-assembly(ROSA) using a hybrid integrated technique are reported. TOSA and ROSA are developed without thermoelectric cooler for coarse wavelength division multiplexing applications. Physical dimension of the packaged optical subassembly is limited to 11.5 mm×5.4 mm×5.4 mm. The design of TOSA and ROSA is employed using a silica-based arrayed waveguide grating chip to select the specific channel wavelength at O-band. In TOSA, the wavelength of four 1.3-μm discrete directly modulated laser chips is well controlled based on the reconstruction equivalent chirp technique. In the back-to-back transmission test, bit error rates for all lanes of cascade of the TOSA and ROSA are small. A clear opening eye diagram is obtained.
