Modeling Blood Flow in Veins of Uniform Properties (Giraffe Jugular Vein)

This paper models the giraffe’s jugular veins as a uniform collapsible tube from a rigid skull. The equations governing one-dimensional steady flow through such a tube for various conditions have been developed. The effects of inertial and inclination angles that have not been discussed previously have been included. It has been shown that different flows for a uniform tube (vein) are possible. However, this flow matches that of a jugular vein which is supercritical, and the steady solution has been given by the balance between the driving forces of gravity and the viscous resistance to the flow at the right atrium of the heart must be sub-critical for a fixed right-atrium pressure which means that an elastic jump is required to return the flow to sub-critical from the supercritical flow upstream this type of relationship gives rise to flow limitation at the same time given any right atrium fixed pressure there exists a maximum flow rate which when exceeded the boundary conditions of the flow do not hold boundary conditions at the right atrium are not satisfied hence making the steady flow impossible this mechanism of flow limitation is slightly different from the other one in that causes airways through forced expiration from the observation made it is clearly shown that there is an intravascular pressure difference with a change in height.

Sensitivity of the area method with mono isotopic fission chambers to reactivity changes in subcritical nuclear reactors

High-level waste is an important safety issue in the development of nuclear power.A proposed solution is the transmutation of waste in fast reactors.The exclusion of the risk of supercriticality by using subcritical reactors is currently under development.Controlling the subcriticality level in such reactors presents difficulties.A problem is posed by the so-called space effect observed when using in reactors many neutron detectors in different locations of the core and reflector.Reactivity obtained from measure-ments,for example,by the Sjo¨strand method,differs by nonnegligible values.Numerical corrections can partially improve this situation.The use of a monoisotopic fission chamber set,designed for a given reactor,when each chamber is intended for a specific position in the system,can improve the situation.A question arises about the sensitivity of the results to reactivity changes.This issue is analyzed by computer simulation for possible fissionable and fissile nuclides for the total range of control rod insertion,changes in reactor fuel enrichment,and fuel temperature.The tested sensitivity was satisfactory at most levels from several dozen to several hundred pcm.A case study was conducted using the VENUS-F core model.

Amino Acids Production from Fish Proteins Hydrolysis in Subcritical Water

The hydrolysis technology and reaction kinetics for amino acids production from fish proteins in subcritical water reactor without catalysts were investigated in a reactor with volume of 400 ml under the conditions of reaction temperature from 180-320℃, pressure from 5-26 MPa, and time from 5-60 rain. The quality and quantity of amino acids in hydrolysate were determined by bioLiquid chromatography, and 17 kinds of amino acids were obtained. For the important 8 amino acids, the experiments were conducted to examine the effects of reaction temperature, pressure and time on amino acids yield. The optimum conditions for high yield are obtained from the experimental results. It is found that the nitrogen and carbon dioxide atmosphere should be used for leucine, isoleucine and histidine production while the air atmosphere might be used for other amino acids. The reaction time of 30 rain and the experimental temperature of 220℃, 240℃ and 260℃ were adopted for reaction kinetic research. The total yield of amino acids versus reaction time have been examined experimentally. According to these experimental data and under the condition of water excess, the macroscopic reaction kinetic equation of fish proteins hydrolysis was obtained with the hydrolysis reaction order of 1.615 and the rate constants being 0.0017, 0.0045 and 0.0097 at 220℃, 240℃ and 260℃ respectively. The activation energy is 145.1 kJ·mol^- 1.

Effect of Cryogenic Treatment on Property of 14Cr2Mn2V High Chromium Cast Iron Subjected to Subcritical Treatment

Effect of cryogenic treatment on the microstructure, hardening behavior and abrasion resistance of 14Cr2Mn2V high chromium cast iron （HCCI） subjected to subcritical treatment was investigated. The results show that cryogenic treatment after subcritical treatment can obviously improve the hardness and abrasion resistance of HCCI because abundant retained austenite is transformed into martensite and fine secondary carbides E（Fe, Cr）23 C6 ] precipitate. The amount of martensite and precipitated secondary carbide in HCCI experiencing subcritical treatment followed by cryogenic treatment was more than that experiencing the subcritical treatment followed by air cooling. When the abrasion resistance of HCCI reaches the maximum, its microstructure contains about 15 % retained austenite. Cryogenic treatment can further reduce the austenite content but the retained austenite cannot be transformed in to martensite completely.

Design and R＆D Progress of China Lead-Based Reactor for ADS Research Facility

In 2011,the Chinese Academy of Sciences launched an engineering project to develop an acceleratordriven subcritical system(ADS)for nuclear waste transmutation.The China Lead-based Reactor(CLEAR),proposed by the Institute of Nuclear Energy Safety Technology,was selected as the reference reactor for ADS development,as well as for the technology development of the Generation IV lead-cooled fast reactor.The conceptual design of CLEAR-I with 10 MW thermal power has been completed.KYLIN series lead-bismuth eutectic experimental loops have been constructed to investigate the technologies of the coolant,key components,structural materials,fuel assembly,operation,and control.In order to validate and test the key components and integrated operating technology of the lead-based reactor,the lead alloy-cooled non-nuclear reactor CLEAR-S,the lead-based zero-power nuclear reactor CLEAR-0,and the lead-based virtual reactor CLEAR-V are under realization.

Test of subcritical crack growth and fracture toughness under water-rock interaction in three types of rocks

The subcritical crack growth and fracture toughness in peridotite, lherzolite and amphibolite were investigated with double torsion test. The results show that water-rock interaction has a significant influence on subcritical crack growth. With water-rock interaction, the crack velocity increases, while the stress intensity factor declines, which illustrates that water-rock interaction can decrease the strength of rocks and accelerate the subcritical crack growth. Based on Charlse theory and Hilling & Charlse theory, the test data were analyzed by regression and the correlation coefficients were all higher than 0.7, which shows the correlation is significant. This illustrates that both theories can explain the results of tests very well. Therefore, it is believed that the subcritical crack growth attributes to the breaking of chemical bond, which is caused by the combined effect of the tensile stress and the chemical reaction between the material at crack tip and the corrosive agent. Meanwhile, water-rock interaction has a vital effect on fracture toughness. The fracture toughness of samples under atmospheric environment is higher than that of samples immersed in water. And water-rock interaction has larger influence on fracture toughness in amphibolite than that in peridotite and lherzolite.

Physical studies of minor actinide transmutation in the accelerator-driven subcritical system

The accelerator-driven subcritical system (ADS) with a hard neutron energy spectrum was used to study transmutation of minor actinides (MAs). The aim of the study was to improve the efficiency of MA transmutation while ensuring that variations in the effective multiplication factor (keff) remained within safe margins during reactor operation. All calculations were completed using code COUPLE3.0. The subcritical reactor was operated at a thermal power level of 800 MW, and a mixture of mononitrides of MAs and plutonium (Pu) was used as fuel. Zirconium nitride (ZrN) was used as an inert matrix in the fuel elements. The initial mass composition in terms of weight percentages in the heavy metal component (IHM) was 30.6% Pu/IHM and 69.4% MA/IHM. To verify the feasibility of this MA loading scheme, variations in keff, the amplification factor of the core, maximum power density and the content of MAs and Pu were calculated over six refueling cycles. Each cycle was of 600 days duration, and therefore, there were 3600 effective full power days. Results demonstrated that the effective transmutation support ratio of MAs was approximately 28, and the ADS was able to efficiently transmute MAs. The changes in other physical parameters were also within their normal ranges.It is concluded that the proposed MA transmutation scheme for an ADS core is reasonable.

HOPF BIFURCATION OF AN OSCILLATOR WITH QUADRATIC AND CUBIC NONLINEARITIES AND WITH DELAYED VELOCITY FEEDBACK

This paper studies the local dynamics of an SDOF system with quadratic and cubic stiffness terms,and with linear delayed velocity feedback.The analysis indicates that for a sufficiently large velocity feedback gain,the equilibrium of the system may undergo a number of stability switches with an increase of time delay,and then becomes unstable forever.At each critical value of time delay for which the system changes its stability,a generic Hopf bifurcation occurs and a periodic motion emerges in a one-sided neighbourhood of the critical time delay.The method of Fredholm alternative is applied to determine the bifurcating periodic motions and their stability.It stresses on the effect of the system parameters on the stable regions and the amplitudes of the bifurcating periodic solutions.

Numerical simulation on effect of heterogeneity on modeΙfracture characteristics of rock

Rock is more sensitive to tensile loading than compressive loading,since the tensile strength of rock is much lower than compressive strength.The fracture characteristics of rock in the tensile state are of great significance to the understanding of rock failure mechanisms.To this end,we have conducted numerical simulation researches on modeⅠcracking process of rock with varying homogeneity,using the Realistic Failure Process Analysis program.With the increase of homogeneity,cracks are concentrating to the ligament area with a decreasing number of crack bifurcations,and the main crack path is becoming smooth.Crack behaviors and mechanical properties are influenced significantly when the homogeneity index is in the range of 1.5 to 5.When the homogeneity index is greater than 30,they are not affected by rock homogeneity and the rock can be considered as essentially homogeneous.It is considered that the global and local strengths are affected by the distribution of rock mechanical properties at mesoscale,which influence the crack behaviors and mechanical characteristics.

Extraction of Astaxanthin from Euphausia pacific Using Subcritical 1,1,1,2-tetrafluoroethane

Euphausia pacific is an important source of natural astaxanthin. Studies were carried out to assess the extractability of astaxanthin from E. pacific using subcritical 1, 1, 1,2-tetrafluoroethane （R134a）. To examine the effects of multiple process variables on the extraction yield, astaxanthin was extracted under various conditions of pressure （30-150bar）, temperature （303-343 K）, time （10-50rain）, flow rate （2-10gmin-1）, moisture content （5.5%-63.61%）, and particle size （0.25-0.109mm）. The results showed that the extraction yield increased with temperature, pressure, time and flow rate, but decreased with moisture content and particle size. A maximum yield of 87.74% was obtained under conditions of 100bar, 333K, and 30min with a flow rate of 6gmin-1 and a moisture content of 5.5%. The substantial astaxanthin yield obtained under low-pressure conditions demonstrates that subcritical R134a is a good alternative to CO2 for extraction of astaxanthin from E. pacific.

Preparation and verification of mixed high-energy neutron crosssection library for ADS

An accelerator-driven subcritical system(ADS)is driven by an external spallation neutron source, which is generated from a heavy metal spallation target to maintain stable operation of the subcritical core, where the energy of the spallation neutrons can reach several hundred megaelectron volts. However, the upper neutron energy limit of nuclear cross-section databases, which are widely used in critical reactor physics calculations, is generally 20 MeV.This is not suitable for simulating the transport of highenergy spallation neutrons in the ADS. We combine the Japanese JENDL-4.0/HE high-energy evaluation database and the ADS-HE and ADS 2.0 libraries from the International Atomic Energy Agency and process all the data files for nuclides with energies greater than 20 MeV. We use the continuous pointwise cross-section program NJOY2016 to generate the ACE-formatted cross-section data library IMPC-ADS at multiple temperature points. Using the IMPC-ADS library, we calculate 10 critical benchmarks of the International Criticality Safety Benchmark Evaluation Project manual, the 14-MeV fixed-source problem of the Godiva sphere, and the neutron flux of the ADS subcritical core by MCNPX. To verify the correctness of the IMPCADS, the results were compared with those calculated using the ENDF/B-VII.0 library. The results showed thatthe IMPC-ADS is reliable in effective multiplication factor and neutron flux calculations, and it can be applied to physical analysis of the ADS subcritical reactor core.

Neutronics analysis of a stacked structure for a subcritical system with LEU solution driven by a D-T neutron source for~(99)Mo production

The utilization of neutrons markedly affects the medical isotope yield of a subcritical system driven by an external D-T neutron source.The general methods to improve the utilization of neutrons include moderating multiplying,and reflecting neutrons,which ignores the use of neutrons that backscatter to the source direction.In this study,a stacked structure was formed by assembling the multiplier and the low-enriched uranium solution to enable the full use of neutrons that backscatter to the source direction and further improve the utilization of neutrons.A model based on SuperMC was used to evaluate the neutronics and safety behavior of the subcritical system,such as the neutron effective multiplication factor,neutron energy spectrum,medical isotope yield,and heat deposition.Based on the calculation results,when the intensity of the neutron source was 59×10^(13)n/s,the optimized design with a stacked structure could increase the yield of ^(99)Mo to182 Ci/day,which is approximately 16% higher than that obtained with a single-layer structure.The inlet H_(2)O coolant velocity of 1.0 m/s and initial temperature of 20℃ were also found to be sufficient to prevent boiling of the fuel solution.

Testing study of subcritical crack growth velocity and fracture toughness of marble

Subcritical crack growth of double torsion specimens made of marble was studied using Instron1342 type electro hydraulic servo test machine. The relations of the mode-I stress intensity factor KI versus the subcritical crack growth velocity V and the fracture toughness KIC were obtained by the double torsion constant displacement load relaxation method. The behavior of subcritical crack growth was analyzed. The results show that lgKI-lgV relations of marble measured by this method accord with linear rule, i.e. the relations between subcritical crack growth velocity V and stress intensity factor KI have a power law, which is in good agreement with Charles theory. The testing results provide a basis for time-dependency of rock engineering stability.

Effect of quenching process on mechanical properties and ductile-brittle transition behavior of 28CrMnMoV steel

Effect of quenching process on the microstrucmre and mechanical properties of a kind of seamless tubes of steel 28CrMnMoV was investigated. Then, an investigation on the influence of two different quenching processes on the ductile-brittle transition behavior of this steel was undertaken. The ductile-brittle transition temperatures of the steel by two different quenching processes were also determined. The results show that a good combination of mechanical properties can be obtained through austenitizing experimental steel at 800 ℃ or 890 ℃ followed by tempering at 630 ℃. Ductile-to-brittle transition temperature of 28CrMnMoV steel austenitized at 800 ℃ followed by tempering at 640 ℃ is about -73 ℃, which is much lower than the value -37 ℃ when the steel was austenitized at 890℃ and then tempered at 650 ℃. This indicates that subcritical quenching process could decrease largely the ductile-to-brittle transition temperature of 28CrMnMoV steel.

Analytical study of subcritical crack growth under mode I loading to estimate the roof durability in underground excavation

The long-term stability of the roof is particularly important in designing underground rock structures.To estimate the durability of roof strata in underground excavation,a computation scheme of subcritical crack growth is proposed in this study.By adopting the proposed method,the potential collapse location of strata is derivable in accordance with a static model,the durability of roof strata can be estimated,a dynamic time step control strategy is achieved to balance the accuracy and speed of computing,and the initial crack size of rock can be estimated.In addition to the above,a mechanical model of underground excavation with non-uniformly distributed loads and partially yielded foundation is presented as the prototypical case.A set of case studies is carried out that showcase a power correlation between applied stress and roof durability.The allowable applied tensile stress for a 100-year life cycle is about 76%of the tensile strength.By using the proposed subcritical crack growth computation scheme,the roof stability in an underground excavation can be identified not only from the spatial view but also from the temporal perspective.

Application of FLUKA and OpenMC in coupled physics calculation of target and subcritical reactor for ADS

The study of accelerator-driven subcritical reactor systems(ADSs) has been an important research topic in the field of nuclear energy for years. The main code applied in ADS research is MCNPX, which was developed by Los Alamos National Laboratory. We studied the application of the open-source Monte Carlo codes FLUKA and OpenMC to a coupled ADS calculation. The FLUKA code was used to simulate the reaction of highenergy protons with the nucleus of the target material in the ADS, which produces spallation neutrons. Information on the spallation neutrons, such as their energy, position,direction, and weight, can be recorded by a user-defined routine called FLUSCW provided by FLUKA. Then, the information was stored in an external neutron source file in HDF5 format by using a conversion code, as required by the OpenMC calculation. Finally, the fixed-source calculation function of OpenMC was applied to simulate the transport of spallation neutrons and obtain the distribution of the neutron flux in the core region. In the coupled calculation, the high-energy cross-section library JENDL4.0/HE in ACE format produced by NJOY2016 was applied in the OpenMC transport simulation. The OECD–ADS benchmark problem was calculated, and the results were compared with those obtained using MCNPX. It was found that the flux calculations performed by FLUKA–OpenMC and MCNPX were in agreement, so the coupling calculation method for ADS is reasonable and feasible.

Development and validation of the code COUPLE3.0 for the coupled analysis of neutron transport and burnup in ADS

The analysis of the fuel depletion behavior is critical for maintaining the safety of accelerator-driven subcritical systems(ADSs). The code COUPLE2.0 coupling 3-D neutron transport and point burnup calculation was developed by Tsinghua University. A Monte Carlo method is used for the neutron transport analysis, and the burnup calculation is based on a deterministic method. The code can be used for the analysis of targets coupled with a reactor in ADSs. In response to additional ADS analysis requirements at the Institute of Modern Physics at the Chinese Academy of Sciences, the COUPLE3.0 version was developed to include the new functions of(1) a module for the calculation of proton irradiation for the analysis of cumulative behavior using the residual radionuclide operating history,(2) a fixed-flux radiation module for hazard assessment and analysis of the burnable poison, and(3) a module for multi-kernel parallel calculation, which improves the radionuclide replacement for the burnup analysis to balance the precision level and computational efficiency of the program. This paper introduces thevalidation of the COUPLE3.0 code using a fast reactor benchmark and ADS benchmark calculations. Moreover,the proton irradiation module was verified by a comparison with the analytic method of calculating the210 Po accumulation results. The results demonstrate that COUPLE3.0 is suitable for the analysis of neutron transport and the burnup of nuclides for ADSs.

Scattering Process of Internal Waves Propagating over a Subcritical Strait Slope onto a Shelf Region

The scattering process, which means the redistribution of energy fluy in modenumber space, is analyzed for internal waves propagating from the abyssal ocean onto a subcritical strait slope and then a shelf region. In light of Wunsch＇s work, the waves are analytically expressed as superimposition of eigensolutions distribution of energy flux in the shelf region： one is the ratio of water depth in and the other is the ratio of the slope of the internal tide rays to the topographic energy flux distribution： the energy flux is focused around one modenumber or case, the range of modenumbers where energy flux is distributed is narrow. Two parameters have evident effects on the the shelf region to that in the abyssal ocean slope. Generally, there are two patterns of focused around two modenumbers. In any case, the range of modenumbers where energy flux is distributed is narrow.

Toluene oxidization to benzaldehyde in subcritical water

Effects of reaction parameter on yield of benzaldehyde produced from toluene oxidization using hydrogen peroxide in subcritical water are investigated. The experimental results show that if the molar ratio of hydrogen peroxide to toluene is controlled within a reasonable range, the by-products may be neglected. The optimum technology of toluene oxidization to benzaldehyde is reaction time 60 min, reaction temperature 350℃, molar ratio of hydrogen peroxide to toluene 3.5. The yield of benzaldehyde can reach 17.2 % under the optimum condition. Research results of chemical reaction kinetics show that the consecutive reaction consists of two first-order reaction, and activation energy of these two reactions are 89 kJ·mol^-1 and 76 kJ·mol^-1 respectively,

Seismicity acceleration model and its application to several earthquake regions in China

With the theory of subcritical crack growth, we can deduce the fundamental equation of regional seismicity acceleration model. Applying this model to intraplate earthquake regions, we select three earthquake subplates: North China Subplate, Chuan Dian Block and Xinjiang Subplate, and divide the three subplates into seven researched regions by the difference of seismicity and tectonic conditions. With the modified equation given by Sornette and Sammis (1995), we analysis the seismicity of each region. To those strong earthquakes already occurred in these region, the model can give close fitting of magnitude and occurrence time, and the result in this article indicates that the seismicity acceleration model can also be used for describing the seismicity of intraplate. In the article, we give the magnitude and occurrence time of possible strong earthquakes in Shanxi, Ordos, Bole Tuokexun, Ayinke Wuqia earthquake regions. In the same subplate or block, the earthquake periods for each earthquake region are similar in time interval. The constant α in model can be used to describe the intensity of regional seismicity, and for the Chinese Mainland, α is 0.4 generally. To the seismicity in Taiwan and other regions with complex tectonic conditions, the model does not fit well at present.