Kinetics and mechanism of the low-energy β-a phase transition of the second kind in 2,4-dinitroanisole

In this work, comprehensive studies of 2,4-dinitroanisole(2,4DNAN) were carried out using powder thermorentgenography of the internal standard. The time of the complete polymorphic transition in the solid phase β→a in 2,4DNAN under various combinations of conditions has been determined. It has been established that, regardless of the season of manufacture of the substance, when it is stored for 8-9months, with a change in ambient temperature from minus 30℃ to plus 30℃, a complete polymorphic transition β→a occurs. When stored in conditions below minus 5℃, polymorphic transition does not occur. When stored in conditions above plus 30℃ in a closed container, polymorphic transition occurs within 3 weeks. The polymorphic transition is accompanied by a decrease in density by 1.3%-1.5% and an increase in melting temperature by 10-12℃, depending on the degree of purity of the starting substance. The activation energy of the molecular rearrangement was 68-70 k J/mol(16.5 ± 3 kcal/mol). The mechanism of polymorphic transition has been evaluated, which is presumably based on internal homodiffusion and energy transfer to the surface of the mass of powder particles and the product. The average activation energy of the polymorphic transition process was 110 ± 6.2 k J/mol(26.2 kcal/mol). In an open container, reactions proceed by a homogeneous mechanism, and in a closed container by a heterogeneous mechanism involving the gas phase.

Low-temperature conformal vacuum deposition of OLED devices using close-space sublimation

Close-space sublimation(CSS)has been demonstrated as an alternative vacuum deposition technique for fabricating organic light-emitting diodes(OLEDs).CSS utilizes a planar donor plate pre-coated with organic thin films as an area source to rapidly transfer the donor film to a device substrate at temperatures below 200℃.CSS is also conformal and capable of depositing on odd-shaped substrates using flexible donor media.The evaporation behaviors of organic donor films under CSS were fully characterized using model OLED materials and CSS-deposited films exhibited comparable device performances in an OLED stack to films deposited by conventional point sources.The low temperature and conformal nature of CSS,along with its high material utilization and short process time,make it a promising method for fabricating flexible OLED displays.

Control Effect of Sublimed Sulfur Paired with Acaricide on Bee Mites

[Objective] This study aimed to compare the effects of sublimed sulfur and acaricide on controlling bee mites.[Method] Three independent experiments were carried out in the same apiary during 2007-2009.[Results] The results showed that this method is effective in eliminating mites settled on combs or hidden during pupae phase,but not in controlling the mites parasitized on adult bees.The control effect on killing Varroa destructor after treated appeared optimal in the first day and then decreased,and that on killing Tvopilaelaps clareae happened in the second day.The results indicated that the effect would be much better if the bees can be treated 1 time to 2 times again in the following 2-5 days after the first treatment.Back to data pool,we found that the treatment of sublimed sulfur paired with acaricide is effective in controlling V.destructor and T.clareae.[Conclusion] This technique could facilitate the apicultural production in the regions suffered from V.destructor and T.clareae.

A Preliminary Study of Yeats' Lyrics of Sublimation

Yeats' lyrics of sublimation is one of his major concerns in his later years. Sublimation for Yeats is essentially the transmutation and elevation of bitterness and tragic facts of being into happiness, into tranquility of mind, then into the emotionless emotion, as Yeats names it as "innocence". The process of sublimation enriches the creativity of Yeats as artist when he is confronted with severity of aging spiritually and physically.

STUDY ON THE HEAT AND MASS TRANSPORT PROPERTIES OF BEEF UNDERGOING FREEZE DRYING

This paper establishes the mathematical model in calculating the effective thermal conductivity and the effective mass diffusivity of dried layer of beef undergoing freeze drying process.First,experimental measurements are done on the dehydrated quantity as well as temperature variations at different locations of the beef steak.Then the effective thermal conductivity and the effective mass diffusivity are calculated by applying the above mathematical model on the data of the dehydrated quantity.These two coefficients are further used in the calculation of temperature distribution.The result is in agreement with the measurement,thus confirming the correctness of the model and the values of the coefficients.

Issues in Freeze Drying of Aqueous Solutions

Freeze drying or lyophilization of aqueous solutions is widely used in pharmaceutical industry. The in-creased importance Of the process is gaining a worldwide interest of research. A growing body of literature has demonstrated that the scientific approach can result in improved product quality with minimum trial and error em-piricism. Formulation and process development need a systematical understanding of the physical chemistry of freezing and freeze drying, material science and mechanisms of heat and mass transfer. This paper presents an overview on freeze ding of aqueous solutions based on publications in the past few decades. The important issuesof the process are analyzed.

Low-Angle Grain Boundaries in Sublimation Grown 6H-SiC Crystals

High-resolution X-ray diffractometry(HRXRD)was used to assess the quality of 6H-SiC crystals grown by sublimation method.The results show the occurrence of low-angle grain boundaries(LB)is close relative to the inclination of the crystal interface.At the central faceted region with 0°inclination the crystal is of high structural perfection.However,at the region close to the facet with less than 5°inclination LB occurs slightly and at the region close to the peripheral polytype ring with more than 5°inclination LB defect occurs heavily.The density of LB can be drastically reduced by decreasing radial temperature gradient that determines the shape of the crystal growth interface.

Preparation of Al2O3–SiO2 composite aerogels and their Cu2+absorption properties

In order to remediate heavy metal ions from waste water,Al2O3–SiO2 composite aerogels are prepared via a sol–gel and an organic solvent sublimation drying method.Various characterisation techniques have been employed including X-ray diffraction(XRD),Fourier transform infrared spectrometry(FTIR),scanning electron microscope(SEM),Energy-dispersion X-ray spectroscopy(EDX),Brunauer–Emmett–Teller(BET)N2 adsoprtion isotherm,and atomic absorption spectrometer(AAS).XRD and FTIR suggest that the aerogels are composed of mainly Al2O3 and minor SiO2.They have a high specific surface area(827.544 m^2/g)and high porosity(86.0%)with a pore diameter of~20 nm.Their microstructures show that the distribution of Al,Si,and O is homogeneous.The aerogels can remove~99%Cu^2+within~40 min and then reach the equilibrium uptake(~69 mg/g).Preliminary calculations show that the Cu2+uptake by the aerogels follows pseudo second-order kinetics where chemical sorption may take effect owing largely to the high surface area,high porosity,and abundant functional groups,such as Al–OH and Si–OH,in the aerogel network.The prepared aerogels may serve as efficient absorbents for Cu^2+removal.

Influence of anode temperature on ignition performance of the IRIT4-2D iodine-fueled radio frequency ion thruster

This paper reports the ignition performance of the iodine-fueled radio frequency(RF)ion thruster(IRIT)at different anode temperaturesT_(a0).The experimental results show that the anode temperature plays important role on the ignition process of the IRIT.There were two characteristic temperatures related to the anode:the minimum ignition temperatureT_(i0)and the stable ignition temperatureT_(is),which were much lower than the pipeline temperature and the storage tank temperature.AtT_(a0)<T_(i0),it failed to discharge.WhenT_(i0)≤T_(a0)<T_(is),it was ignited with dramatical oscillations.AtT_(a0)≥T_(is),the discharge was stable in a large anode temperature range.The analysis showed that the different discharge phenomena at different anode temperatures were attributed to the change of iodine flow rate during the process of the iodine deposition-clogging and sublimation-clearing inside the thruster.The research helps improve the preheating design of the iodine-fueled electric thruster.

Preparation and Properties of CdTe Polycrystalline Films for Solar Cells

The structure and characteristics of CdTe thin filrns are closely dependent on the whole deposition process in close-space sublimation （CSS）. The physical mechanism of CSS was analyzed aud the temperature distribution in CSS system was measured, and the influences of the increasing-temperature process and pressure on the preliminary nucleus creation were studied. The resuits indicate ： tire samples deposited at different pressures hare a cubical structure of CdTe and the diffraction peaks of CdS and SnO2 ： F. As the atmosphere pressure increases, the crystal size of CdTe decreases, the rate of the transparency of the thin film decreases and the absorption side moves towards the short-wave direction. After a 4-minute depositing process with a substrate teraw.rature of 500℃ and a source temperature of 620 ℃, the polycostallinc thin films can be mmade , so the production of high-quality integrated cell with StrO2： F/ CdS/ CdTe/ Au structure is hopeful.

Numerical investigation on freeze-drying of aqueous material frozen with pre-built pores

Freeze-drying of the initially porous frozen material with pre-built pores from liquid material was found experimentally to save drying time by over 30% with an initial saturation being 0.28 compared with the conventional operation with the initial saturation being 1, using mannitol as the solid material. In order to understand the mass and heat transfer phenomena of this novel process, a two-dimensional mathematical model of coupled mass and heat transfer was derived with reference to the cylindrical coordinate system. Three adsorption–desorption equilibrium relationships between the vapour pressure and saturation value namely, power-law, Redhead's style and Kelvin's style equation, were tested. Kelvin's style in exponential form of adsorption equilibrium relation gave an excellent agreement between the model prediction and experimental measurement when the equation parameter, γ, of 5000 was applied. Analyses of temperature and ice saturation profiles show that additional heat needs to be supplied to increase the sample temperature in order to promote the desorption process. Simulation also shows that there is a threshold initial porosity after which the drying time decreased with the increase in the initial porosity. Enhanced freeze-drying is expected to be achieved by simultaneously enhancing mass and heat transfer of the process.

Role of blowing snow in snow processes in Qilian Mountainous region

Blowing snow is an important part of snow hydrologic processes in mountainous region, however the related researches were rare for the Qilian mountainous region where blowing snow is frequent. Using the observation dataset in 2008 snow season in Binggou wa- tershed in Qilian mountainous region, we systematically studied the energy and mass processes of blowing snow by field observation and model simulation. The results include the analysis of snow observation, the occurrence probability of blowing snow, blowing snow transport and blowing snow sublimation. It was found that blowing snow was obvious in high altitude region （4,146 m）, the snow redislribution phenomena was remarkable. In Yakou station in the study region, blowing snow was easily occurred in midwinter and early spring when no snowmelt, the blowing snow transport was dominated in this period; when snowmelt beginning, the occur- rence probability of blowing snow decreased heavily because of the increasing air temperature, melt, and refrozen phenomena. The blowing snow sublimation accounted for 41.5% of total snow sublimation at Yakou station in 2008 snow season.

Physical Properties in Drying of Food Products with Combined Sublimation and Evaporation

Drying is an important unit operation in processing of biological resources. The drying process may influence the product properties and quality, which may shrink, break or undergo rheological, physical and biochemical changes. The important parameters responsible for such changes are drying conditions, type of drying technology and residence drying time. Thermal conductivity, thermal-mass diffusivity, enthalpy, porosity and density are the main material property and heat-mass transfer parameters, which are essential for understanding the changes in product quality and for designing and dimensioning the drying processes. In this paper physical properties of food products undergoing a combined sublimation and evaporation were studied. Pieces of vegetables and potatoes were dried in a heat pump fluidized bed dryer at combined modes with temperatures below the freezing point in the beginning and a final drying step at temperatures above the freezing point. Samples of products were tested at different moisture contents with respect to physical properties. Physical properties of leek and potato samples were measured and mass diffusivities were determined from drying kinetic data. Based on bulk density and rehydration measurements it was clearly observed that drying temperature and modes influenced the final product physical properties. The potato cube run dried with initial atmospheric freeze-drying step had rehydration ability 430%above a run dried only above the freezing point. The average effective mass diffusivity for 5 mm slabs of leek was 0.5 x 10-11m2·s-1 for the sublimation stage and 2.2 x 10-11m2·s-1 for the evaporation stage.

Effects of Post-Thermal Treatment on Quality of SiC Grown by PVT Method

We report the effects of post-thermal treatment on the quality of 2-inch 6H-SiC wafer cut from a crystal boule grown by physical vapour transportation method. The full widths at half maximum of x-ray diffraction rocking curves measured on sites across the 2-inch wafer become narrower, indicating the quality improvement after a three-step post-thermal treatment. It is found that the most common defects such as micropipes and inclusions can be significantly reduced after the treatment. Our results show that the post-thermal treatment is an effective route to improve the quality of SiC single crystals.

CdTe Films Deposited by Closed-space Sublimation

CdTe films are prepared by closed-space sublimation technology. Dependence of film crystalline on substrate materials and substrate temperature is investigated. It is found that films exhibit higher crystallinity at substrate temperature higher than 400 ℃. And the CdTe films deposited on CdS films with higher crystallinity have bigger crystallite and higher uniformity. Treatment with CdCl 2 methanol solution promotes the crystallite growth of CdTe films during annealing.

Characterization of foreign grain on 6H-SiC facet

6H-SiC single crystals were grown by sublimation method. It is found that foreign grains occur frequently on the facets of the crystals. To characterize the foreign grain, a longitudinal and a sectional cut samples were prepared by standard mechanical processing method. Raman spectrum confirms that the foreign grain is actually a mis-oriented 6H-SiC grain. The surface structure of the foreign grain was studied by chemical etching and optical microscopy. It is shown that etch pits in foreign grain region take the shape of isosceles triangle, which are different from those in mono-crystalline region, and high density stacking faults are observed on the surface of the foreign grain. The orientation of foreign grain surface is determined to be （10]-4） plane by back-scattering X-ray Laue image. The X-ray powder diffraction reveals that the powder is partly graphitized after a long crystal growth rim. Therefore it is believed that the loss of Si results in the formation of C inclusions, which is responsible for the nucleation of foreign grain in the facet region.

The ligand coordination approach for improving the stability of low-mercury catalyst in the hydrochlorination of acetylene

Mercuric chloride supported on activated carbon(HgCl_2/AC) is used as an industrial catalyst for the hydrochlorination of acetylene. Loss of HgCl_2 by sublimating from the surface of activated carbon causes the irreversible deactivation of mercury catalyst and environmental pollution. In this work, a ligand coordination approach based on the Principle of Hard and Soft Acids and Bases(HSAB) was employed to design more stable lowmercury catalyst. The low-mercury catalysts(4% HgCl_2 loading) were prepared by using HgCl_2 and potassium halides(KX, X = Cl, I) as precursors. The HgCl_2-4KI/AC catalyst showed best catalytic stability than HgCl_2/AC and HgCl_2-4KCl/AC in the hydrochloriantion of acetylene. HgCl_2 could form more stable complex with KI,K_2HgI_4 as the main active component of the HgCl_2-4KI/AC catalyst. The characterizations of XRD and EDX analysis illustrated that the active component of HgCl_2-4KI/AC was highly dispersed on the surface of activated carbon.The sublimation rates of HgCl_2 from the catalysts verified that the active component with larger stability constant had better thermal stability. Using Hg(Ⅱ) complexes with high stability constant as the active component may be the research direction of developing highly stable low-mercury catalyst for the hydrochlorination of acetylene.

Novel Nanosized Adsorbing Composite Cathode Materials for the Next Generational Lithium Battery

A novel carbon-sulfur nano-composite material was synthesized by heating sublimed sulfur and high surface area activated carbon （HSAAC） under certain conditions. The physical and chemical per- formances of the novel carbon-sulfur nano-composite were characterized by scanning electron microscopy （SEM）, Brunauer-Emmett-Teller （BET） and X-ray diffraction （XRD）. The electrochemical performances of nano-composite were characterized by charge-discharge characteristic, cyclic voltammetry and electrochemical impendence spectroscopy （EIS）. The experimental results indicate that the electrochemical capability of nano- composite material was superior to that of traditional S-containing composite material. The cathode made by carbon-sulfur nano-composite material shows a good cycle ability and a high specific charge-discharge capacity. The HSAAC shows a vital role in adsorbing sublimed sulfur and the polysulfides within the cathode and is an excellent electric conductor for a sulfur cathode and prevents the shuttle behavior of the lithium-sulfur battery.

从“崇高”与“sublime”侧看我国的近代化

"崇高"是康德《判断力批判》的核心词之一,该词的基本涵义东西方有很大的差异。不同的文化有着各自规范的价值观念,也就意味着,不同文化的不同民族,观察世界的角度和思维方式不同,这种不同导致中西方在"国家的大思维"上有一定差异。

Toward Sublime: the Comparison of Sea Poems in Chinese and English Literature

This essay briefly discusses different reflections of western and Chinese philosophy towards sea in poems.By the comparison of the evaluation of sea in Chinese and English poems,this essay reaches the conclusion that both cultures have sublime understanding towards sea.