Investigation of hydroxyl-terminated polybutadiene propellant breaking characteristics and mechanism impacted by submerged cavitation water jet

A submerged cavitation water jet(SCWJ)is an effective method to recycle solid propellant from obsolete solid engines by the breaking method.Solid propellant's breaking modes and mechanical process under SCWJ impact are unclear.This study aims to understand those impact breaking mechanisms.The hydroxyl-terminated polybutadiene(HTPB)propellant was chosen as the research material,and a self-designed test system was used to conduct impact tests at four different working pressures.The high-speed camera characterized crack propagation,and the DIC method calculated strain change during the impact process.Besides,micro and macro fracture morphologies were characterized by scanning electron microscope(SEM)and computed tomography(CT)scanning.The results reveal that the compressive strain concentration region locates right below the nozzle,and the shear strain region distributes symmetrically with the jet axis,which increases to 4% at first 16th ms,the compressive strain rises to 2% and 6% in the axial and transverse direction,respectively.The two tensile cracks formed first at the compression strain concentrate region,and there generate many shear cracks around the tensile cracks,and those shear cracks that develop and aggregate cause the cracks to become wider and cut through the tensile cracks,forming the tensile-shear cracks and the impact parts eventually fail.The HTPB propellant forms a breaking hole shaped conical after impact 10 s.The mass loss increases by 17 times at maximum,with the working pressure increasing by three times.Meanwhile,the damage value of the breaking hole remaining on the surface increases by 7.8 times while 2.9 times in the depth of the breaking hole.The breaking efficiency is closely affected by working pressures.The failure modes of HTPB impacted by SCWJ are classified as tensile crack-dominated and tensile-shear crack-dominated damage mechanisms.

Vital contribution of brassinosteroids to hypoxia-stimulated coleoptile elongation in submerged rice

The rapid elongation of rice(Oryza sativa)coleoptile is pivotal for the plant plumule to evade hypoxia stress induced by submergence,a condition often arising from overirrigation,ponding,rainstorms,or flooding.While brassinosteroids(BRs)are recognized for their diverse roles in plant growth and development,their influence on coleoptile elongation under hypoxic conditions remains largely unexplored.In this study,we demonstrate the significant requirement of BRs for coleoptile elongation in deep water.During coleoptile development,Glycogen Synthase Kinase3-Like Kinase2(GSK2),the central inhibitor of BR signaling in rice,undergoes substantial suppression in deep water but induction in air.In contrast,the dephosphorylated form of BRASSINAZOLE RESISTANT1(OsBZR1),representing the active form of the key BR signaling transcription factor,is induced in water but suppressed in air.Remarkably,the knockout of GSK3-like kinase genes significantly enhances coleoptile elongation in deep water,strongly indicating a vital contribution of BR response to hypoxia-stimulated coleoptile elongation.Transcriptome analysis uncovers both BR-associated and BR-independent hypoxia responses,implicating substance metabolism,redox reactions,abiotic stress responses,and crosstalk with other hormones in the regulation of BR-induced hypoxia responses.In summary,our findings suggest that rice plumules rapidly elongate coleoptiles through the activation of BR response in deep water,enabling them to escape from submergence-induced hypoxia stress.

The UDP-glycosyltransferase OsUGT706D2 positively regulates cold and submergence stress tolerance in rice

In a genome-wide association study,we identified a rice UDP-glycosyltransferase gene,OsUGT706D2,whose transcription was activated in response to cold and submergence stress and to exogenous abscisic acid(ABA).OsUGT706D2 positively regulated the biosynthesis of tricin-4’-O-(syringyl alcohol)ether-7-O-glucoside at both the transcriptional and metabolic levels.OsUGT706D2 mediated cold and submergence tolerance by modulating the expression of stress-responsive genes as well as the abscisic acid(ABA)signaling pathway.Gain of function of OsUGT706D2 increased cold and submergence tolerance and loss of function of OsUGT706D2 reduced cold tolerance.ABA positively regulated OsUGT706D2-mediated cold tolerance but reduced submergence tolerance.These findings suggest the potential use of OsUGT706D2 for improving abiotic stress tolerance in rice.

Study on the Load Characteristics of Submerged Body Under Internal Solitary Waves on the Continental Shelf and Slope

Based on the high-quality observation data and the numerical simulation,the evolution characteristics of internal solitary waves(ISWs)and the load on the suspend submerged body are studied on the continental shelf and slope separately.The observed ISWs exhibit the first mode depression ISWs.The amplitudes of ISWs on the shelf and slope areas reach 50 m and 80 m,respectively.The upper layer velocity in the westward direction is about 0.8 m/s on the continental shelf and 0.9 m/s on the continental slope during the passing through of ISWs.The lower layer is dominated by the eastward compensating flow.In the vertical direction,the water in front of the wave flows downward,while the water behind the wave flows upward,and the maximum vertical velocity exceeds 0.2 m/s.Numerical simulation results show that the larger the amplitude of ISWs,the larger the load on the submerged body.The force on the submerged body by ISWs is dominated by the vertical force,and the corresponding maximum vertical forces on the continental shelf and slope are−25 kN and −27 kN.The submerged body is subjected to a large counterclockwise moment and the sudden change of the moment will also cause the submerged body to capsize.This paper not only gives a deeper understanding of the characteristics of ISWs from the deep continental slope to the shallow continental shelf,but also has a certain guiding value for the prediction of ISWs and for marine military activities.

Experimental Study on Hydrodynamic Load Characteristics for A Typical Cross-Section of A Submerged Floating Tunnel

The typical cross-sectional form of a submerged floating tunnel plays a significant role in the dynamic response of the tunnel itself,which directly affects the overall design.In this work,a series of experiments involving wave action on a submerged floating tube cross section is reported to study its hydrodynamic load characteristics.Two typical cross section tube cylinders,circular and rectangular,are chosen.Experiments are carried out in a wave flume with waves of relatively low Keulegan-Carpenter(KC)numbers.Three relative depths of submergence of 0,0.25 and 0.5 are chosen.The measured wave forces in regular waves are used to analyze the horizontal force,vertical force and torque,and then the drag coefficient(Cd)and inertia coefficient(Cm)are derived.The results show that the drag coefficients at low KC numbers are large and decrease sharply with increasing KC number.The inertial coefficient Cm values in the vertical direction are about 70%larger than those in the horizontal direction.With an increase in aspect ratio(the ratio of the height to width of the structure),the ratio of inertia coefficient in the horizontal direction to that in the vertical direction increases remarkably.The inertia force coefficient is very sensitive to the submerged water depth and aspect ratio.The existing results may overestimate the actual force value.

Global Dynamic Responses and Progressive Failure of Submerged Floating Tunnel Under Cable Breakage Conditions

The Submerged Floating Tunnel(SFT)relies on a tensioned mooring system for precise positioning.The sudden breakage of a single cable can trigger an immediate alteration in the constraint conditions of the tube,inducing a transient heave response within the structure along with a transient increase in cable tension experienced by adjacent cables.In more severe cases,this may even lead to a progressive failure culminating in the global destruction of the SFT.This study used ANSYS/AQWA to establish a numerical model of the entire length SFT for the hydrodynamic response analysis,and conducted a coupled calculation of the dynamic responses of the SFT-mooring line model based on Orca Flex to study the global dynamic responses of the SFT at the moment of cable breakage and the redistribution of cable internal forces.The most unfavorable position for SFT cable breakage was identified,the influence mechanism of cable breakage at different positions on the global dynamic response was revealed,and the progressive chain failure pattern caused by localized cable breakage are also clarified.

Numerical study of submerged bending vegetation under unidirectional flow

Submerged vegetation commonly grows and plays a vital role in aquatic ecosystems,but it is also regarded as a barrier to the passing flow.Numerical simulations of flow through and over submerged vegetation were carried out to investigate the effect of vegetation density on flow field.Numerical simulations were computationally set up to replicate flume experiments,in which vegetation was mimicked with flexible plastic strips.The fluid-structure interaction between flow and flexible vegetation was solved by coupling the two modules of the COMSOL packages.Two cases with different vegetation densities were simulated,and the results were successfully validated against the experimental data.The contours of the simulated time-averaged streamwise velocity and Reynolds stress were extracted to highlight the differences in mean and turbulent flow statistics.The turbulence intensity was found to be more sensitive to vegetation density than the time-averaged velocity.The developing length increased with the spacing between plants.The snapshots of the bending vegetation under instantaneous velocity and vorticity revealed that flexible vegetation responded to the effects of eddies in the shear layer by swaying periodically.The first two rows of vegetation suffered stronger approaching flow and were prone to more streamlined postures.In addition,the origin of tip vortices was investigated via the distribution of vorticity.The results reveal the variation of flow properties with bending submerged vegetation and provide useful reference for optimizationofrestorationprojects.

Numerical Analysis of the Influence of the Impinging Distance on the Scouring Efficiency of Submerged Jets

Water jet technology is widely used in submerged buried pipes as a non-traditional trenching process,often invol-ving a complex sediment response.An important adjustable and influential engineering variable in this technol-ogy is represented by the impinging distance.In this study,the FLOW-3D software was used to simulate the jet scouring of sand beds in a submerged environment.In particular,four sets of experimental conditions were con-sidered to discern the relationship between the maximum scour depth and mass and the impinging distance.As shown by the results,a critical impinging distance h0 exists by which the static scour depth can be maximized;the scour mass ratio between dynamic and static conditions decreases as the impinging distance increases.Moreover,the profile contours are similar when the erosion parameter Ec is in the range 0.35<Ec<2.Empirical equations applicable for predicting the jet trenching contour under both dynamic and static scour modes are also provided in this study.

Experimental and Three-Dimensional Numerical Simulation of Phenomena Induced by Submerged Oblique Jet Scouring

Scouring experiments were conducted using a three-dimensional laser scanning technology for angles of the jet spanning the interval from 0°to 30°,and the characteristics of the scour hole in equilibrium conditions were investigated accordingly.The results indicate that the optimal scouring effects occur when the jet angle is in the ranges between 15°and 20°.Moreover,the dimensionless profiles of the scour hole exhibit a high degree of similarity at different jet angles.Numerical simulations conducted using the Flow-3D software to investigate the bed shear stress along the jet impingement surface have shown that this stress is influenced by both the resultant force and the jet impingement surface area.It reaches its maximum value when the jet is vertical,decreases rapidly as the jet starts to tilt,then increases slightly,and decreases again significantly when the angle exceeds 20°.

Application of Thermodynamic Database to Corrosion of ZrO_(2) Containing Submerged Entry Nozzle in Steel Continuous Casting Process

The CALPHAD thermodynamic databases are very useful to analyze the complex chemical reactions happening in high temperature material process.The FactSage thermodynamic database can be used to calculate complex phase diagrams and equilibrium phases involving refractories in industrial process.In this study,the FactSage thermodynamic database relevant to ZrO_(2)-based refractories was reviewed and the application of the database to understanding the corrosion of continuous casting nozzle refractories in steelmaking was presented.

Flow and penetration behavior of submerged side-blown gas

To assess the widely used submerged side-blowing in pyrometallurgy,a high-speed camera-digital image processing-statistical approach was used to systematically investigate the effects of the gas flow rate,nozzle diameter,and inclination angle on the space-time distribution and penetration behavior of submerged side-blown gas in an air-water system.The results show that the gas motion gradually changes from a bubbling regime to a steady jetting regime and the formation of a complete jet structure as the flow rate increases.When the flow rate is low,a bubble area is formed by large bubbles in the area above the nozzle.When the flow rate and the nozzle diameter are significant,a bubble area is formed by tiny bubbles in the area above the nozzle.The increased inclination angle requires a more significant flow rate to form a complete jet structure.In the sampling time,the dimensionless horizontal and vertical penetration depths are Gaussian distributed.Decreasing the nozzle diameter and increasing the flow rate or inclination angle will increase the distribution range and discreteness.New correlations for a penetration depth with an error of±20%were obtained through dimensional analysis.The dimensionless horizontal penetration depth of an argon-melt system in a 120 t converter calculated by the correlation proposed by the current study is close to the result calculated by a correlation in the literature and a numerical simulation result in the literature.

Experimental Study of Submergence Ratio on Local Scour Around a Square Pile in Steady Flow

Scour around a submerged square pile was realized experimentally in a steady flow to study the effects of flow depth on local scour.Flow depth to pile height ratios ranging from 1.5 to 5 in uniform sand and 2 to 5 in non-uniform sand were tested in the approaching flow velocity to critical velocity(larger than which the sediment particle is motivated)ratios of 0.56 and 1.03,respectively.The influences of flow depth were investigated on the basis of analysis of the three-dimensional topography,temporal maximum scour depth,bed profile development,and equilibrium scour depth.Results showed that the maximum scour depth was at the upstream corners of the pile other than at the stagnation point.The evolutions of the maximum scour depth data in non-uniform sand were well fitted with a recent exponential function,which characterized the initial,developing,and equilibrium stages of scour depth.The scour hole slopes upstream of the pile were found to be parallel to each other in the process of each test and were mainly governed by the sediment repose underwater.The equilibrium scour depth varied slightly with flow depth when the submergence ratio was larger than 1 in uniform sand while it was 2 in non-uniform sand.The armoring effects of coarse sediment particles markedly reduced the sediment transport in non-uniform sand despite the 0.34 increment in non-uniformity.

Research on the Dynamic Response of Submerged Floating Tunnels to Wave Currents and Traffic Load

Submerged floating tunnel(SFTs)are typically subjected to complex external environmental and internal loads such as wave currents and traffic load.In this study,this problem is investigated through a finite element method able to account for fluid-structure interaction.The obtained results show that increasing the number of vehicles per unit length enhances the transverse vibrational displacements of the SFT cross sections.Under ultimate traffic load condition,one-way and two-way syntropic distributions can promote the dynamic responses of SFTs whereas two-way reverse distributions have the opposite effect.

Effect of light and nutrients on interspecific interactions between submerged macrophytes:implications for restoration of multispecies aquatic vegetation in eutrophic lakes

Constructing multispecies submerged vegetation systems and maintaining stable seasonal succession is crucial for restoring shallow eutrophic lakes.However,little is known about the interactions between successional and existing species of different growth forms,particularly under the low light and high nutrient conditions of eutrophic lakes.We measured the functional traits of mature Vallisneria natans(Lour.)Hara plants and Potamogeton crispus L.shoots in monoculture and mosaic patterns under different light and nutrient conditions.The effect of light on functional traits of the submerged macrophyte species was more significant than that of nutrients,but the reverse was true for P.crispus biomass allocation.Moreover,interspecific interactions affected only the submerged macrophytes under the low light condition and varied with species.Specifically,the interaction of P.crispus to V.natans was biased towards competition,while the interaction of V.natans to P.crispus was converted from facilitation to competition by eutrophication,particularly in the homogenous mosaic growth pattern.This study demonstrates that sufficient light is a prerequisite and patch planting is an effective means to form a multispecies submerged vegetation system.In addition,we emphasize that the coexistence of eutrophication and low light will likely result in a competition between submerged macrophytes thus simplifying the vegetation,even if their growth forms and growing seasons are different.These findings help explain the collapse of multispecies submerged vegetation and guide the restoration of aquatic plants in eutrophic lakes.

Temporal characteristics of algae-denitrifying bacteria co-occurrence patterns and denitrifier assembly in epiphytic biofilms on submerged macrophytes in Caohai Lake,SW China

Denitrifying bacteria in epiphytic biofilms play a crucial role in nitrogen cycle in aquatic habitats.However,little is known about the connection between algae and denitrifying bacteria and their assembly processes in epiphytic biofilms.Epiphytic biofilms were collected from submerged macrophytes(Patamogeton lucens and Najas marina L.)in the Caohai Lake,Guizhou,SW China,from July to November 2020 to:(1)investigate the impact of abiotic and biotic variables on denitrifying bacterial communities;(2)investigate the temporal variation of the algae-denitrifying bacteria co-occurrence networks;and(3)determine the contribution of deterministic and stochastic processes to the formation of denitrifying bacterial communities.Abiotic and biotic factors influenced the variation in the denitrifying bacterial community,as shown in the Mantel test.The co-occurrence network analysis unveiled intricate interactions among algae to denitrifying bacteria.Denitrifying bacterial community co-occurrence network complexity(larger average degrees representing stronger network complexity)increased continuously from July to September and decreased in October before increasing in November.The co-occurrence network complexity of the algae and nirS-encoding denitrifying bacteria tended to increase from July to November.The co-occurrence network complexity of the algal and denitrifying bacterial communities was modified by ammonia nitrogen(NH_(4)^(+)-N)and total phosphorus(TP),pH,and water temperature(WT),according to the ordinary least-squares(OLS)model.The modified stochasticity ratio(MST)results reveal that deterministic selection dominated the assembly of denitrifying bacterial communities.The influence of environmental variables to denitrifying bacterial communities,as well as characteristics of algal-bacterial co-occurrence networks and the assembly process of denitrifying bacterial communities,were discovered in epiphytic biofilms in this study.The findings could aid in the appropriate understanding and use of epiphytic biofilms denitrification function,as well as the enhancement of water quality.

Study on the Propagation and Focusing Mechanism of Long Waves over A Submerged Atoll

An analytical solution for long waves propagating over a submerged atoll is established. The atolls involved in this study are annular coral reefs with large lagoons in the middle, and the expression of the cross section is a trinomial function of the radial distance, i.e., h=ar(2s)-br~s+h_0, where s is the positive rational number. This analytical solution extends the theory by Wang et al.(2018) as s is no longer limited to s=2/m, where m is the positive integer. In addition, by adjusting the terrain parameters properly, the analytic solution can be degenerated to describe the wave propagation over topography with a hump or pit. According to the relationship between wave rays and wave energy, the distribution characteristics and formation mechanism of energy over the topography are expounded. When the lagoon is non-existent, all wave rays converge at the x-axis, which results in an abrupt amplification of the wave amplitude around the convergence point. When a lagoon is mounted on the top of the atoll, the rays are scattered due to the refraction of the lagoon, and only some rays converge at the symmetrical axis and the ridges on both sides,which results in the amplification of wave amplitudes in these areas.

Multi-Parameter Influence Analysis of Interaction Between Internal Solitary Wave and Fixed Submerged Body

To obtain the interaction characteristics between Internal solitary waves(ISWs)and submerged bodies,a three-dimensional numerical model for simulating ISWs was established in the present study based on the RANS equation.The velocity entrance method was adopted to generate the ISWs.First,the reliability of this numerical model was validated by comparing it with theoretical and literature results.Then,the influence of environmental and navigation parameters on interactions between ISWs and a fixed SUBOFF-submerged body was studied.According to research,the hydrodynamic performance of the submerged body has been significantly impacted by the ISWs when the body is nearing the central region of the wave.Besides,the pitching moment(y')will predominate when the body encounters the ISWs at a certain angle between 0°and 180°,and the lateral force is larger than the horizontal force.Additionally,the magnitude of the force acting on the body is mostly affected by the wave amplitude.The variation of the vertical force is the main way that ISWs affect the hydrodynamic performance of the bodies.The investigations and findings discussed above can serve as a guide to forecast how ISWs will interact with submerged bodies.

Comparison Study and Forensic Analysis between Experiment and Coupled Dynamics Simulation for Submerged Floating Tunnel Segment with Free Ends under Wave Excitations

This paper presents dynamic-behavior comparisons and related forensic analyses of a submerged floating tunnel(SFT)between numerical simulation and physical experiment under regular and irregular waves.The experiments are conducted in the 3Dwave tank with 1:33.3 scale,and the corresponding coupled time-domain simulation tool is devised for comparison.The entire SFT systemconsists of a long concrete tunnel and 12 tubular aluminummooring lines.Two numerical simulation models,the Cummins equation with 3D potential theory including second-order wave-body interaction effects and the much simpler Morison-equation-based formula with the lumped-massbased line model,are designed and compared.Forensic analyses for mooring-line adjustments in the simulation are carried out in view of the best representation of the physical system.After that,the measured pre-tension distribution and systemstiffness of twelvemooring lines arewell reproduced in the numericalmodel.Subsequently,the dynamic responses and mooring tensions of the SFT are compared under regular and irregular waves.The measured and simulated results coincide reasonably well for both regular-and irregular-wave conditions.

Numerical Investigation of the Multiphase Flow Originating from the Muzzle of Submerged Parallel Guns

A two-dimensional model,employing a dynamic mesh technology,is used to simulate numerically the transient multiphaseflowfield produced by two submerged parallel guns.After a grid refinement study ensuring grid inde-pendence,five different conditions are considered to assess the evolution of cavitation occurring in proximity to the gun muzzle.The simulation results show thatflow interference is enabled when the distance between the par-allel barrels is relatively small;accordingly,the generation and evolution of the vapor cavity becomes more com-plex.By means of the Q criterion for vorticity detection,it is shown that cavitation causes the generation of vorticity and the evolution of the vapor cavity can result in an asymmetric distribution of vorticity for a certain distance of the barrels.In particular,the evolution of the vapor cavity can hinder the expansion of the gas and force it toflow outward,while an asymmetric distribution of vorticity can lead to a gas jetflowing outward and rotating simultaneously.

Isolation and Identification of Submergence-induced Genes in Maize (Zea mays) Seedlings by Suppression Subtractive Hybridization

To investigate the expression profile of maize genes induced by submergence, a subtracted cDNA library of maize seedling roots was constructed using suppression subtractive hybridization (SSH). The cDNA of maize seedling roots treated with submergence (ST) was used as tester and what from untreated roots (UT) as driver. Products of the secondary PCR from the forward subtraction were cloned into T/A vector and transferred into Escherichia coli strain JM10B by electroporation. Four hundred and eight randomly chosen transformants carrying cDNA fragments were screened with PCR-Select Deferential Screening Kit. One hundred and eighty-four cDNA clones were identified as, submergence specifically induced or highly expressed. After sequencing and removing redundant cDNAs, we got 95 submergence-induced cDNA clones. Of the 95 cDNA clones, 68 contain the regions with 60%-90% identity to their homolog in GenBank, 21 are expected to be novel genes, only 6 correspond to the published maize sequences.