Mechano-chemical sulfidization of zinc oxide by grinding with sulfur and reductive additives

A novel process for sulfidation of ZnO by co-grinding with sulfur and reductive additives （P, Fe, A1, and Mg） was developed. The sulfidation extent of ZnO with the addition of P, Fe, A1 or Mg can reach 85.2%, 81.6%, 96.7% and 92.6% after grinding for 4, 6, 1 and 1 h, respectively. Based on the chemical phase composition analysis and morphological characteristics of sulfidized products by XRD, SEM and TEM, a possible reaction mechanism, mechanically induced self-propagating reaction （MSR）, was proposed to explain the sulfidization reaction. In addition, the floatability of sulfidized products was investigated for the recovery of metal sulfide and ZnS can be concentrated with a high concentration ratio and concentrate grade. By using the sulfidizing process, it is expected that the recovery of zinc from the wastes or purification of heavy-metal-containing hazardous residues is technically feasible.

Enhanced sulfidization flotation of cuprite by surface modification with hydrogen peroxide

Hydrogen peroxide was used as an oxidant to modify the cuprite surface and enhance its sulfidization.Surface-adsorption and infrared spectroscopy measurements indicated that the modification of the cuprite surface with hydrogen peroxide before sulfidization increased the adsorption capacity of xanthate.Zeta potential,scanning electron microscopy-energy dispersive X-ray spectroscopy,X-ray photoelectron spectroscopy,and time-of-flight secondary ion mass spectrometry results showed that the modification with hydrogen peroxide increased the contents of S^(2−)and Sn^(2−)species on the cuprite surface.Microflotation tests showed that the recovery of cuprite increased from 61.74%to 83.30%after the modification of the surface with hydrogen peroxide.These results confirm that the modification of the cuprite surface with hydrogen peroxide enhances the sulfidization of cuprite,which in turn improves its flotation.

Mechanochemical sulfidization of a mixed oxide-sulphide copper ore by co-grinding with sulfur and its effect on the flotation efficiency

Mechanochemical sulfidization of a mixed sulfide/oxide copper ore by co-grinding with sulfur and additives including Mg(NO3)2 and Fe(NO3)3 salts and iron,aluminum and magnesium powders was investigated for the first time.Also,the influence of sulfidization during the wet-milling process was examined on the separation efficiency and recovery of copper in detail.The results demonstrated that co-grinding with sulfur solely had the best flotation performance at the value of 0.5 wt.%and it was attributed to the possible existence of S\\O bonding on copper oxides surfaces.In addition,adding magnesium nitrate salt,magnesium powder,iron nitrate salt and aluminum powder as additive associated with 0.5 wt%sulfur into ball milling caused the flotation improvement at the amounts of 0.2 wt%,0.2 wt%,0.5 wt%and 0.5 wt%,respectively.Also,the effect of grinding time and sulfidization pH with 0.5 wt%sulfur solely was determined and pH s of 7.5 to 8.5 gave the best results.The highest recovery(75.76%)and separation efficiency(63.44%)were achieved at pH of 7.5 and 8.5,respectively.

Enhanced sulfidization of azurite surfaces by ammonium phosphate and its effect on flotation

Although azurite is one of the most important copper oxide minerals,the recovery of this mineral via sulfidization-xanthate flotation is typically unsatisfactory.The present work demonstrated the enhanced sulfidization of azurite surfaces using ammonia phosphate((NH_(4))_(3)PO_(4)) together with Na_(2)S,based on micro-flotation experiments,time-of-flight secondary ion mass spectrometry(ToF-SIMS),X-ray photoelectron spectroscopy(XPS),zeta-potential measurements,contact angle measurements,Fourier-transform infrared(FT-IR)spectroscopy,and ultraviolet-visible(UV-Vis)spectroscopy.Micro-flotation experiments showed that the floatability of azurite was increased following the simultaneous addition of(NH_(4))_(3)PO_(4)and Na_(2)S.ToF-SIMS and XPS analyses demonstrated the formation of a high content of S species on the azurite surface and an increase in the number of Cu(I)species after exposure to(NH_(4))_(3)PO_(4)and Na_(2)S,compared with the azurite-Na_(2)S system.The zeta potential of azurite particles was negatively shifted and the contact angle on the azurite surface was increased with the addition of(NH_(4))_(3)PO_(4)prior to Na_(2)S.These results indicate that treatment with(NH_(4))_(3)PO_(4) enhances the sulfidization of azurite surfaces,which in turn promotes xanthate attachment.FT-IR and UV-Vis analyses confirmed that the addition of(NH_(4))_(3)PO_(4) increased the adsorption of xanthate with reducing the consumption of xanthate during the azurite flotation process.Thus,(NH_(4))_(3)PO_(4) has a beneficial effect on the sulfidization flotation of azurite.

Sulfidization regulation of cuprite by pre-oxidation using sodium hypochlorite as an oxidant

The direct sulfidization of cuprite is inefficient because cuprite is a copper-oxide mineral with a strong surface hydrophilicity.In this study,oxidant was used to modify cuprite surfaces to regulate the sulfidization of cuprite.Microflotation tests showed that the flotation recovery of pre-oxidized cuprite was nearly25% higher than that of direct sulfidization flotation,which indicates that the cuprite surface activity was enhanced after pre-oxidation by Cu(Ⅰ) species(weak affinity with sulfur ions) transformation to Cu(Ⅱ)species(strong affinity with sulfur ions).Zeta potential,scanning electron microscopy-energy dispersive X-ray spectroscopy,X-ray photoelectron spectroscopy,and time-of-flight secondary ion mass spectrometry results showed that pre-oxidation improved cuprite sulfidization and promoted the formation of copper-sulfide species on the cuprite surfaces.The mineral surface stability and thus,xanthate species adsorption on the cuprite surfaces were improved.The surface-adsorption measurements and infrared spectroscopy showed that a large amount of xanthate species was adsorbed onto the sulfidized cuprite surfaces after pre-oxidation,which enhanced the cuprite hydrophobicity and improved the cuprite flotation.

Adsorption behavior and mechanism of copper ions in the sulfidization flotation of malachite

Malachite is one of the main minerals used for the industrial enrichment and recovery of copper oxide resources, and copper ions are unavoidable metal ions in the flotation pulp. The microflotation, contact angle, and adsorption experiments indicated that pretreatment with an appropriate concentration of copper ions could improve the malachite recovery, and the addition of excess copper ions reduced the hydrophobicity of the malachite surface. The results of zeta potential tests indicated that sodium sulfide and butyl xanthate were also adsorbed on the surface of malachite pretreated with copper ions. X-ray photoelectron spectroscopy(XPS) results indicated that —Cu—O and —Cu—OH bonds were formed on the surface of the samples. After pretreatment with an appropriate concentration of copper ions, the number of —OH groups on the mineral surface decreased, whereas the number of Cu—S groups on the mineral surface increased, which was conducive to the sulfidization of malachite. After adding a high concentration of copper ions, the —OH groups on the mineral surface increased, whereas the number of Cu—S groups decreased, which had an adverse effect on the sulfidization flotation of malachite. Time-of-flight secondary ion mass spectrometry showed that pretreatment with copper ions resulted in a thicker sulfidization layer on the mineral surface.

A novel method for improving cerussite sulfidization

Evaluation of flotation behavior, solution measurements, and surface analyses were performed to investigate the effects of chloride ion addition on the sulfidization of cerussite in this study. Micro-flotation tests indicate that the addition of chloride ions prior to sulfidization can significantly increase the flotation recovery of cerussite, which is attributed to the formation of more lead sulfide species on the mineral surface. Solution measurement results suggest that the addition of chloride ions prior to sulfidization induces the transformation of more sulfide ions from pulp solution onto the mineral surface by the formation of more lead sulfide species. X-ray diffraction and energy-dispersive spectroscopy indicate that more lead sulfide species form on the mineral surface when chloride ions are added prior to sulfidization. These results demonstrate that the addition of chloride ions prior to sulfidization can significantly improve the sulfidization of cerussite, thereby enhancing the flotation performance.

Mechanistic insights into stepwise activation of malachite for enhancing surface reactivity and flotation performance

Malachite is a common copper oxide mineral that is often enriched using the sulfidization-xanthate flotation method.Currently,the direct sulfidization method cannot yield copper concentrate products.Therefore,a new sulfidization flotation process was developed to promote the efficient recovery of malachite.In this study,Cu^(2+) was used as an activator to interact with the sample surface and increase its reaction sites,thereby strengthening the mineral sulfidization process and reactivity.Compared to single copper ion activation,the flota-tion effect of malachite significantly increased after stepwise Cu^(2+) activation.Zeta potential,X-ray photoelectron spectroscopy(XPS),time-of-flight secondary ion mass spectroscopy(ToF-SIMS),scanning electron microscopy and energy dispersive spectrometry(SEM-EDS),and atomic force microscopy(AFM)analysis results indicated that the adsorption of S species was significantly enhanced on the mineral surface due to the increase in active Cu sites after Cu^(2+) stepwise activation.Meanwhile,the proportion of active Cu-S spe-cies also increased,further improving the reaction between the sample surface and subsequent collectors.Fourier-transform infrared spec-troscopy(FT-IR)and contact angle tests implied that the xanthate species were easily and stably adsorbed onto the mineral surface after Cu^(2+) stepwise activation,thereby improving the hydrophobicity of the mineral surface.Therefore,the copper sites on the malachite sur-face after Cu^(2+) stepwise activation promote the reactivity of the mineral surface and enhance sulfidization flotation of malachite.

Cellular preconditioning and mesenchymal stem cell ferroptosis

In this editorial,we comment on the article published in the recent issue of the World Journal of Stem Cells.They focus on stem cell preconditioning to prevent ferroptosis by modulating the cystathionineγ-lyase/hydrogen sulfide(H_(2)S)pathway as a novel approach to treat vascular disorders,particularly pulmonary hypertension.Preconditioned stem cells are gaining popularity in regenerative medicine due to their unique ability to survive by resisting the harsh,unfavorable microenvironment of the injured tissue.They also secrete various paracrine factors against apoptosis,necrosis,and ferroptosis to enhance cell survival.Ferroptosis,a regulated form of cell death characterized by iron accumulation and oxidative stress,has been implicated in various pathologies encompassing dege-nerative disorders to cancer.The lipid peroxidation cascade initiates and sustains ferroptosis,generating many reactive oxygen species that attack and damage multiple cellular structures.Understanding these intertwined mechanisms provi-des significant insights into developing therapeutic modalities for ferroptosis-related diseases.This editorial primarily discusses stem cell preconditioning in modulating ferroptosis,focusing on the cystathionase gamma/H_(2)S ferroptosis pathway.Ferroptosis presents a significant challenge in mesenchymal stem cell(MSC)-based therapies;hence,the emerging role of H_(2)S/cystathionase gamma/H_(2) S signaling in abrogating ferroptosis provides a novel option for therapeutic intervention.Further research into understanding the precise mechanisms of H_(2)S-mediated cytoprotection against ferroptosis is warranted to enhance the thera-peutic potential of MSCs in clinical settings,particularly vascular disorders.

Bioinformatics analysis and experimental validation of cystathionine-gamma-lyase as a potential prognosis biomarker in hepatocellular carcinoma

Background:Hepatocellular carcinoma(HCC)is a common malignant tumor with poor prognosis and high mortality worldwide.Although cystathionine-gamma-lyase(CSE)plays an important role in the development of multiple tumors,the clinical implication and potential mechanisms of CSE in HCC development remain elusive.Methods:In our study,the CSE expression in HCC was analyzed in Gene Expression Omnibus(GEO)and The Cancer Genome Atlas(TCGA)datasets and further confirmed by RT-qPCR and immunohistochemistry assays in HCC samples.Furthermore,the associations between CSE expression and HCC malignancy as well as survival were analyzed in GSE14520 and validated in HCC patients.Finally,the biological functions of CSE in HCC cells was assessed by CCK-8,flow cytometry and Western blotting.Results:Lower transcriptional and proteomic CSE expressions were found in HCC tissues in contrast to adjacent normal tissues.Decreased CSE mRNA expression was significantly associated with advanced clinicopathological features and poor outcomes in HCC patients from public database and our cohort.Following univariate and multivariate analyses of GSE14520 data showed that CSE expression was an independent prognostic indicator for the overall survival(OS)and recurrence-free survival(RFS)of HCC patients.In vitro experiments further explained that CSE might trigger HCC cell apoptosis by H2S.Conclusion:In summary,the present study identified the relationship between CSE expression and HCC malignancy as well as OS and RFS,indicating that CSE might be a potential prognostic biomarker and a novel therapeutic target for HCC.

Mobility and sulfidization of heavy metals in sediments of a shallow eutrophic lake, Lake Taihu, China

The technique of DGT（diffusive gradients in thin films） using three diffusive gel thicknesses was applied to estimate the mobility and bioavailability of heavy metals in sediments and porewater of Lake Taihu, China. The DGT results showed significantly positive correlations between Co, Pb, Cd and Mn, and Ni and Fe concentrations in porewater. Cu and Zn showed a significantly negative correlation with Mn, due to Cu combination with carbonates and Zn derived from agricultural pollution, respectively. The rank order of average concentrations of Co, Ni and Cd at each station was DGT1.92〉DGT0.78〉 DGT0.39, suggesting stronger resupply from sediments to porewater when using thicker diffusive gels. Comparing centrifugation and DGT measurements, Co, Ni and Cd are highly labile; Mn and Fe are moderately labile; and Cu, Zn and Pb are slightly labile. The variations of AVS concentrations in sediment cores indicate that metal sulfides in deeper layers are easily diffused into surface sediments.

Hydrogen sulfide responsive nanoplatforms: Novel gas responsive drug delivery carriers for biomedical applications

Hydrogen sulfide(H_(2)S)is a toxic,essential gas used in various biological and physical processes and has been the subject of many targeted studies on its role as a new gas transmitter.These studies have mainly focused on the production and pharmacological side effects caused by H_(2)S.Therefore,effective strategies to remove H_(2)S has become a key research topic.Furthermore,the development of novel nanoplatforms has provided new tools for the targeted removal of H_(2)S.This paper was performed to review the association between H_(2)S anddisease,relatedH_(2)S inhibitory drugs,aswell as H_(2)S responsive nanoplatforms(HRNs).This review first analyzed the role of H_(2)S in multiple tissues and conditions.Second,common drugs used to eliminate H_(2)S,as well as their potential for combination with anticancer agents,were summarized.Not only the existing studies on HRNs,but also the inhibition H_(2)S combined with different therapeutic methods were both sorted out in this review.Furthermore,this review provided in-depth analysis of the potential of HRNs about treatment or detection in detail.Finally,potential challenges of HRNs were proposed.This study demonstrates the excellent potential of HRNs for biomedical applications.

Insight into the Inhibition of the Poisonous Sulfide Production from Sulfate-Reducing Microbiota in Mariculture Habitat

The production of toxic sulfides is a common environmental problem in mariculture.Therefore,the effective inhibition of sulfidogens is the key to prevent sulfides production.In this study,the possibility and mechanism of nitrate(NO_(3)^(−))inhibiting the activity of the sulfate-reducing microbiota(SRM)from mariculture sediments was investigated.The results showed that 1,3,and 5 mmol L^(−1)NO_(3)^(−)continuously inhibited sulfide production for 1-3 d.As NO_(3)^(−) dosage increased to 7 mmol L^(−1),the duration of inhibition increased to 6 days.Denitrifying product NO_(2)^(−)heavily inhibited the activity of dissimilar sulfate reductase gene(dsrB)by 3 orders,which was the main reason that the sulfate-reducing activity was inhibited.The SRM structure changed significantly with the dosage of NO_(3)^(−),while the abundance of sulfidogens Desulfovibrio species increased due to their capability of detoxifying nitrite through nitrite reductase.Hence,sulfidogens Desulfovibrio species are more adaptable to a high nitrate/nitrite environment,and the traditional control strategies by dosing nitrate/nitrite should be paid more attention to.The findings will serve as helpful guidelines for sulfate-reducing microbiota in the habitat of mariculture to reduce their generation of poisonous sulfide.

Investigation of oxy-fuel combustion for methane and acid gas in a diffusion flame

Co-combustion of methane(CH4)and acid gas(AG)is required to sustain the temperature in Claus reaction furnace.In this study,oxy-fuel combustion of methane and acid gas has been experimentally studied in a diffusion flame.Three equivalence ratios(ER=1.0,1.5,2.0)and CH_(4)-addition ratios(CH_(4)/AG=0.3,0.5,0.7)were examined and the flame was interpreted by analyzing the distributions of the temperature and species concentration along central axial.CH_(4)-AG diffusion flame could be classified into three sections namely initial reaction,oxidation and complex reaction sections.Competitive oxidation of CH_(4)and H_(2)S was noted in the first section wherein H_(2)S was preferred and both were mainly proceeding decomposition and partial oxidation.SO_(2)was formed at oxidation section together with obvious presence of H2 and CO.However,H2 and CO were inclined to be sustained under fuel rich condition in the complex reaction section.Reducing ER and increasing CH4/AG contributed to higher temperature,H_(2)S and CH_(4)oxidation and CO_(2)reactivity.Hence a growing trend for CH_(4)and AG to convert into H_(2),CO and SO_(2)could be witnessed.And this factor enhanced the generation of CS2 and COS in the flame inner core by interactions of CH4 and CO_(2)with sulfur species.COS was formed through the interactions of CO and CO_(2)with sulfur species.The CS_(2)production directly relied on reaction of CH_(4)with sulfur species.The concentration of COS was greater than CS_(2)since CS_(2)was probably inhibited due to the presence of H_(2).COS and CS_(2)could be consumed by further oxidation or other complex reactions.

Absorption characteristics,model,and molecular mechanism of hydrogen sulfide in morpholine acetate aqueous solution

The solubility of H_(2)S was measured in solutions of N-butyl-N-methylmorpholine acetate([Bmmorp][Ac])containing 20%-40%(mass)water at experimental temperatures ranged from 298.15 to 328.15 K and pressures up to 320 k Pa.The total solubility of H_(2)S increased with higher temperatures,lower pressures,and reduced water content.The reaction equilibrium thermodynamic model was used to correlate the solubility data.The results indicate that the chemical reaction equilibrium constant decrease with increasing water content and temperature,whereas Henry constant increase with increasing water content and temperature.Compared with other ionic liquids,H_(2)S exhibits a higher physical absorption enthalpy and a lower chemical absorption enthalpy in[Bmmorp][Ac]aqueous solution.This suggests that[Bmmorp][Ac]has a strong physical affinity for H_(2)S and low energy requirement for desorption.Quantum chemical methods were used to investigate the molecular mechanism of H_(2)S absorption in ionic liquids.The interaction energy analysis revealed that the binding of H_(2)S with the ionic liquid in a1:2 ratio is more stable.Detailed analyses by the methods of the interaction region indicator and the atoms in molecules were conducted to the interactions between H_(2)S and the ionic liquid.

Superhydrophobic Co/Fe sulfide nanoparticles and single-atoms doped carbon nanosheets composite air cathode for high-performance zinc-air batteries

Development of a high-performance bifunctional catalyst is essential for the actual implementation of zinc-air batteries in practical applications.Herein,a bifunctional cathode of Co_(3)S_(4)/FeS heterogeneous nanoparticles embedded in Co/Fe single-atom-loaded nitrogen-doped carbon nanosheets is designed.Cobalt-iron sulfides and single atomic sites with Co-N_(4)/Fe-N_(4)configurations are confirmed to coexist on the carbon matrix by EXAFS spectroscopy.3D self-supported super-hydrophobic multiphase composite cathode provides abundant active sites and facilitates gas–liquid-solid three-phase interface reactions,resulting in excellent electrocatalytic activity and batteries performance,i.e.,an OER overpotential(η_(10))of 260 mV,a half-wave potential(E_(1/2))of 0.872 V for ORR,aΔE of 0.618 V,and a discharge power density of 170 mW cm^(−2),a specific capacity of 816.3 mAh g^(−1).DFT analysis shows multiphase coupling of sulfide heterojunction through single-atomic metal doped carbon nanosheets reduces offset on center of electronic density of states before and after oxygen adsorption,and spin density of adsorbed oxygen with same spin orientation,leading to weakened charge/spin interactions between adsorbed oxygen and substrate,and a lowered oxygen adsorption energy to accelerate OER/ORR.

Interface and mechanical degradation mechanisms of the silicon anode in sulfide-based solid-state batteries at high temperatures

Silicon(Si)is a competitive anode material owing to its high theoretical capacity and low electrochemical potential.Recently,the prospect of Si anodes in solid-state batteries(SSBs)has been proposed due to less solid electrolyte interphase(SEI)formation and particle pulverization.However,major challenges arise for Si anodes in SSBs at elevated temperatures.In this work,the failure mechanisms of Si-Li_(6)PS_(5)Cl(LPSC)composite anodes above 80℃are thoroughly investigated from the perspectives of interface stability and(electro)chemo-mechanical effect.The chemistry and growth kinetics of Lix Si|LPSC interphase are demonstrated by combining electrochemical,chemical and computational characterizations.Si and/or Si–P compound formed at Lix Si|LPSC interface prove to be detrimental to interface stability at high temperatures.On the other hand,excessive volume expansion and local stress caused by Si lithiation at high temperatures damage the mechanical structure of Si-LPSC composite anodes.This work elucidates the behavior and failure mechanisms of Si-based anodes in SSBs at high temperatures and provides insights into upgrading Si-based anodes for application in SSBs.

Electronic and Thermoelectric Properties in SnS-Nanoribbon-Based Heterojunctions

As an earth-abundant and environmentally friendly material,tin sulfide(SnS)is not only a high-performance photovoltaic material,but also a new promising thermoelectric material.Despite extensive research on the thermoelectric properties of this material in recent years,the room-temperature thermoelectric figure of merit(ZT)of SnS has not been broke through 2[2022 Sci.China Mater.651143].In this work,based on a combination of density functional theory and non-equilibrium Green’s function method,the electronic and thermoelectric properties in SnS-nanoribbon-based heterojunctions are studied.The results show that although SnS nanoribbons(SNSNRs)with zigzag edges(ZSNSNRs)and armchair edges(ASNSNRs)both have semiconductor properties,the bandgaps of ASNSNRs are much wider than those of ZSNSNRs,which induces much wider conductance gaps of𝑁N-ASNSNR(N is the number of tin-sulfide lines across the ribbon width)).In the positive energy region,the ZT peaks of𝐿L-SNS-Au are much larger than those of𝐿L-SNS-GNR(L represents the number of longitudinal repeating units of SNSNR in the scattering region).While in the positive energy region,the ZT peaks of L-SNSGNR are larger than those of L-SNS-Au.Further calculations reveal that the figure of merit will be over 3.7 in L-SNS-Au and 2.2 in L-SNS-GNR at room temperature,and over 4 in L-SNS-Au and 2.6 in L-SNS-GNR at 500 K.

Excitation and ionization of OCS molecules in strong UV and NIR laser fields

Rydberg state excitation(RSE) is a highly non-linear physical phenomenon that is induced by the ionization of atoms or molecules in strong femtosecond laser fields. Here we observe that both parent and fragments(S, C, OC) of the triatomic molecule carbonyl sulfide(OCS) can survive strong 800 nm or 400 nm laser fields in high Rydberg states. The dependence of parent and fragment RSE yields on laser intensity and ellipticity is investigated in both laser fields, and the results are compared with those for strong-field ionization. Distinctly different tendencies for laser intensity and ellipticity are observed for fragment RSE compared with the corresponding ions. The mechanisms of RSE and strong-field ionization of OCS molecules in different laser fields are discussed based on the experimental results. Our study sheds some light on the strong-field excitation and ionization of molecules irradiated by femtosecond NIR and UV laser fields.

Lithium cation-doped tungsten oxide as a bidirectional nanocatalyst for lithium-sulfur batteries with high areal capacity

Lithium-sulfur(Li-S) batteries are promising for high energy-storage applications but suffer from sluggish conversion reaction kinetics and substantial lithium sulfide(Li_(2)S) oxidation barrier,especially under high sulfur loadings.Here,we report a Li cation-doped tungsten oxide(Li_(x)WO_(x)) electrocatalyst that efficiently accelerates the S■HLi_(2)S interconversion kinetics.The incorporation of Li dopants into WO_(x) cationic vacancies enables bidirectional electrocatalytic activity for both polysulfide reduction and Li_(2)S oxidation,along with enhanced Li^(+) diffusion.In conjunction with theoretical calculations,it is discovered that the improved electrocatalytic activity originates from the Li dopant-induced geometric and electronic structural optimization of the Li_(x)WO_(x),which promotes the anchoring of sulfur species at favourable adsorption sites while facilitating the charge transfer kinetics.Consequently,Li-S cells with the Li_(x)WO_(x) bidirectional electrocatalyst show stable cycling performance and high sulfur utilization under high sulfur loadings.Our approach provides insights into cation engineering as an effective electrocatalyst design strategy for advancing high-performance Li-S batteries.