期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
血液相容材料的合成研究Ⅷ.磺铵两性离子单体在聚醚氨酯表面的臭氧活化接枝 被引量:12
1
作者 艾飞 袁幼菱 +3 位作者 吴一多 周静 沈健 林思聪 《高分子学报》 SCIE CAS CSCD 北大核心 2002年第4期535-539,共5页
Biocompatibility,particularly blood compatibility is the most important property required for biomedical materials.The improvement of blood compatibility is always an important research task for biomaterial research a... Biocompatibility,particularly blood compatibility is the most important property required for biomedical materials.The improvement of blood compatibility is always an important research task for biomaterial research and development.It is an important way to develop biomaterials by constructing special molecules onto the proper mechanical material surface.Polyetherurethanes are widely used as biomaterials due to their good biocompatibility and mechanical properties.Nevertheless,their blood compatibility is still not adequate for the more demanding applications.The purpose of present study was to synthesis a novel nonthrombogenic biomaterial by modifying the surface of polyetherurethane.Ozone was used to introduce active peroxide groups onto polyetherurethane surface and graft polymerization of N,N dimethyl N methacryloxyethyl N (3 sulfopropyl) ammonium (DMMSA), a sulfobetaine structure,onto the ozone activated polyetherurethane surface was conducted.The nonthrombogenic properties of grafted film were also studied.The grafted film was characterized by ATR FTIR,XPS and contact angle measurement.The ATR FTIR,XPS of the grafted PU film indicated that the graft polymerization did take place,the grafted PU film surface was covered with the DMMSA polymer.The grafting yields in different condition were studied.The grafting yields increased with the increase of the monomer concentration.Water absorption and contact angle showed that the hydrophilicity of the film had been improved greatly,and the hydrophilicity of the film increased with the grafting yield.The blood compatibility of the grafted films was evaluated by platelet adhesion in platelet rich plasma and scanning electron microscopy observation using PU film as the reference.No platelet adhesion was observed for the grafted films incubated for 60 min and 180 min,however,the ungrafted PU film was covered with platelet.The result of platelet adhesion experiment indicated that the PDMMSA chains could prevent platelet adhesion.That means this new material is expected to have potential biomedical applications. 展开更多
关键词 血液相容材料 合成 聚醚氨酯 表面接枝 臭氧 活化接枝 磺铵两性离子单体 不凝血生物材料 生物医用材料
下载PDF
无皂乳液聚合法制备P(St-MMA-SPMAP)单分散乳胶颗粒 被引量:9
2
作者 杨凌露 丛海林 曹维孝 《高分子学报》 SCIE CAS CSCD 北大核心 2005年第2期223-226,共4页
利用无皂乳液聚合 ,分别用一步法和两步法合成了单分散的聚 (苯乙烯 甲基丙烯酸甲酯 甲基丙烯酸丙基磺酸钾 ) (P(St MMA SPMAP) )乳胶颗粒 .在该聚合体系中 ,当水溶性磺酸基单体SPMAP的浓度小于 17mmol L时 ,为均相成核过程 ,能制备... 利用无皂乳液聚合 ,分别用一步法和两步法合成了单分散的聚 (苯乙烯 甲基丙烯酸甲酯 甲基丙烯酸丙基磺酸钾 ) (P(St MMA SPMAP) )乳胶颗粒 .在该聚合体系中 ,当水溶性磺酸基单体SPMAP的浓度小于 17mmol L时 ,为均相成核过程 ,能制备单分散的乳胶颗粒 .其中 ,用两步法制备的乳胶颗粒相互之间无粘连 .此外 ,还对一步法合成苯乙烯 甲基丙烯酸甲酯 甲基丙烯酸辛基磺酸钠 (P(St MMA SOMAS) )乳胶颗粒进行了初步研究 . 展开更多
关键词 乳胶颗粒 无皂乳液聚合法 单分散 苯乙烯-甲基丙烯酸甲酯 制备 一步法合成 聚合体系 成核过程 两步法 磺酸钾 磺酸基 水溶性 颗粒相 MMA 磺酸钠
下载PDF
我国阳离子染料可染聚酯及其改性剂的研究进展 被引量:8
3
作者 张翠丽 汪少朋 黄关葆 《合成纤维工业》 CAS CSCD 北大核心 2006年第3期50-53,共4页
介绍了我国阳离子可染聚酯(CDP)的生产路线及其改性剂间苯二甲酸二甲酯-5-磺酸钠(SIPM)和间苯二甲酸双羟乙酯-5-磺酸钠(SIPE)的合成工艺。重点介绍了对苯二甲酸(PTA)路线间歇聚合CDP工艺技术。概述了PTA路线的生产现状;分析我国PTA间歇... 介绍了我国阳离子可染聚酯(CDP)的生产路线及其改性剂间苯二甲酸二甲酯-5-磺酸钠(SIPM)和间苯二甲酸双羟乙酯-5-磺酸钠(SIPE)的合成工艺。重点介绍了对苯二甲酸(PTA)路线间歇聚合CDP工艺技术。概述了PTA路线的生产现状;分析我国PTA间歇聚合工艺合成CDP存在的问题,建议用中温法合成 SIPE,优化合成工艺,提高CDP产品质量。指出PTA路线连续聚合CDP工艺是今后CDP生产的发展趋势。 展开更多
关键词 聚对苯二甲酸乙二醇酯 阳离子染料可染聚酯 间苯二甲酸二甲酯-5-磺酸钠 间苯二甲酸双羟 乙酯-5-磺酸钠 间歇聚合
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部