Density functional theory study of B- and Si-doped carbons and their adsorption interactions with sulfur compounds

Understanding the adsorption interactions between carbon materials and sulfur compounds has far-reaching impacts,in addition to their well-known important role in energy storage and conversion,such as lithium-ion batteries.In this paper,properties of intrinsic B or Si single-atom doped,and B-Si codoped graphene(GR)and graphdiyne(GDY)were investigated by using density functional theory-based calculations,in which the optimal doping configurations were explored for potential applications in adsorbing sulfur compounds.Results showed that both B or Si single-atom doping and B-Si codoping could substantially enhance the electron transport properties of GR and GDY,improving their surface activity.Notably,B and Si atoms displayed synergistic effects for the codoped configurations,where B-Si codoped GR/GDY exhibited much better performance in the adsorption of sulfurcontaining chemicals than single-atom doped systems.In addition,results demonstrated that,after B-Si codoping,the adsorption energy and charge transfer amounts of GDY with sulfur compounds were much larger than those of GR,indicating that B-Si codoped GDY might be a favorable material for more effectively interacting with sulfur reagents.

Identification and Characterization of Sulfur Compounds in Straight-Run Diesel Using Comprehensive Two-Dimensional GC Coupled with TOF MS

The solid-phase extraction using Pd-Al2O3 as the stationary phase was employed to pre-separate the sulfur compounds in straight-run diesel. The isolating effect was evaluated quantitatively by gas chromatography with a sulfur chemiluminescence detector to harvest a satisfactory result. The identification of the structure of sulfur compounds by comprehensive two-dimensional gas chromatography coupled with the time-of-flight mass spectrometry indicated that cyclo-sulfides, benzothiophenes, dibenzothiophenes, dihydro-benzothiophenes and tetrahydro-dibenzothiophenes were included in straightrun diesel obtained from the Arab medium crude(AM). A total of 259 individual compounds were detected and their molecular structures were identified. The analytical method was approved as an effective way to characterize the composition of sulfur compounds, which reduced the interference of other compounds, facilitated the data presentation and provided more detailed information about molecular composition of sulfur compounds.

Ultra-deep adsorptive removal of thiophenic sulfur compounds from FCC gasoline over the specific active sites of CeHY zeolite

Adsorption desulfurization performance of Na Y,HY and Ce HY zeolites is evaluated in a miniature fixedbed flow by model gasoline containing with thiophene,tetrahydrothiophene,2-methylthiophene,benzothiophene or mixed sulfur compounds.The structural properties of adsorbents are characterized by XRD,N2-adsorption and XPS techniques.Adsorption desulfurization mechanisms of these sulfur compounds over the specific active sites of adsorbents as a major focus of this work,have been systematically investigated by using in situ FT-IR spectroscopy with single and double probing molecules.Desulfurization experimental results show that the Ce HY adsorbent exhibits superior adsorption sulfur capacity at breakthrough point of zero sulfur for ultra-deep removal of each thiophenic sulfur compound,especially in the capture of aromatic 2-methylthiophene(about ca.28.6 mgS/gadsorbent).The results of in situ FT-IR with single probing molecule demonstrate an important finding that high oligomerization ability of thiophene or 2-methylthiophene on the CeHY can promote the breakthrough adsorption sulfur capacity,mainly resulting from the synergy between Br?nsted acid sites and Ce(III)hydroxylated species active sites located in the supercages of Ce HY.Meanwhile,the result of in situ FT-IR with double probing molecules further reveals the essence of oligomerization reactions of thiophene and 2-methylthiophene molecules on those specific active sites.By contrast,the oligomerization reaction of benzothiophene molecules on the active sites of Ce HY cannot occur due to the restriction of cavity size of supercages,but they can be adsorbed on the Br?nsted acid sites via protonation,and on Ce(III)hydroxylated species and extra-framework aluminum hydroxyls species via direct"S-M"bonding interaction.As to the tetrahydrothiophene,adsorption mechanism is similar to that of benzothiophene,except in the absence of protonation.The paper can provide a new design idea of specific adsorption active sites in excellent desulfurization adsorbents for elevating higher quality of FCC gasoline in the future.

Effect of Olefins on Formation of Sulfur Compounds in FCC Gasoline

The effect of olefins on formation of sulfur compounds in FCC gasoline was studied in a small-scale fixed fluidized bed （FFB） unit at temperatures ranging from 400℃ to 500℃, a weight hourly space velocity （WHSV） of 10 h-1, and a catalyst/oil ratio of 6. The results showed that C4--C6 olefins contained in the FCC gasoline could react with HzS to form predominantly thiophenes, alkyl-thiophenes as well as a fractional amount of thiols, while large molecular olefins such as heptene could react with hydrogen sulfide to form benzothiophenes. The amount of sulfur compounds formed at different tem- peratures over different catalysts were in proportion to the mass fractions of olefins in the feedstock, with the amount of sulfur compounds formed over REUSY catalyst exceeding those formed over the shape selective zeolite catalyst owing to the effect of catalyst performance and the impact of catalyst on the degree of olefin conversion. The amount of sulfur compounds generated and their increase reached a maximum at 450℃ and a minimum at 400℃ because of the influence of temperature on the thermodynamic and kinetic constants for formation of sulfur compound as well as on the olefin conversion degree. Based on the above-mentioned study, a reaction network and a model for prediction of sulfur compounds generated upon reaction of olefins in FCC gasoline with HES were established.

Removal of Heteroaromatic Sulfur Compounds by a Non-noble Metal Fe Single-atom Adsorbent

Sulfur-containing compounds(SCCs)must be removed from fuels before use.In this study,a novel non-noble metal Fe single-atom adsorbent(SA-Fe/CN)was synthesized using a core-shell strategy and applied for the adsorptive removal of benzothiophene(BT)and dibenzothiophene(DBT).The adsorption isotherms,thermodynamics,kinetics,and adsorption-regeneration cycles of DBT and BT on SA-Fe/CN were studied.SA-Fe/CN exhibited a significant capacity to adsorb DBT,and the isothermal equilibrium was well described by the Langmuir isotherm.The Gibbs free energy values were negative(ΔG^(0)<0),indicating that the adsorption of DBT and BT was favored and spontaneous.The adsorption process conformed to the pseudo-second-order kinetic model with high R^(2) values(0.9994,0.9987).The adsorption capacity of SA-Fe/CN for DBT and BT reached 163.21 mg/g and 90.35 mg/g,respectively,due to the highly active sites of the single atom and electrostatic interaction with the sulfide.Therefore,SA-Fe/CN may be a promising adsorbent for SCC removal.

Sulfur-containing amino acid methionine as the precursor of volatile organic sulfur compounds in algea-induced black bloom

After the application of methionine, a progressive and significant increase occurred in five volatile organic sulfur compounds （VOSCs）： methanethiol （MESH）, dimethyl sulfide （DMS）, dime^yl disulfide （DMDS）, dimethyl trisulfide （DMTS） and dimethyl tetrasulfide （DMTeS）. Even in the untreated control without a methionine addition, methionine and its catabolites （VOSCs, mainly DMDS） were found in considerable amounts that were high enough to account for the water＇s offensive odor. However, blackening only occurred in two methionine-amended treatments. The VOSCs production was observed to precede black color development, and the reaching of a peak value for total VOSCs was often followed by water blackening. The presence of glucose stimulated the degradation of methionine while postponing the occurrence of the black color and inhibiting the production of VOSCs. In addition, DMDS was found to be the most abundant species produced after the addition of methionine alone, and DMTeS appeared to be the most important compound produced after the addition of methionine＋glucose. These results suggest that methionine acted as an important precursor of the VOSCs in lakes suffering from algea-induced black bloom. The existence of glucose may change the transformation pathway of methionine into VOSCs to form larger molecular weight compounds, such as DMTS and DMTeS.

Integration of cryogenic trap to gas chromatography-sulfur chemiluminescent detection for online analysis of hydrogen gas for volatile sulfur compounds

Hydrogen fuel cells are among the promising energy sources worldwide,which could accomplish cyclic production of energy and avoid the emission of green-house or contaminative byproducts.However,sulfur compounds(SCs)even at trace level(nmol/mol)are usually involved in cell construction and further H_(2)production,which would cause degradation of the catalysts and shorten the lifetime of the fuel cells.Moreover,the highly reactive SCs could cause varied species and concentrations of them in complex matrices,so online rather than offline analysis of SCs in H_(2)would be preferred.In this context,we developed a new system combining online cryogenic preconcentration of nine SCs and subsequent determination by GC-SCD(sulfur chemiluminescent detector),with the correlation coefficients of the calibration curves higher than 0.999,calculated limits of detection no higher than 0.050 nmol/mol,analytical time around 30 min per sample,and satisfactory precision and accuracy(RSD<5%and SD<15%).The analytical performance was much better than or at least comparable to the previously reported and the developed system was successfully applied for real sample analysis.

Molecular characterization of sulfur compounds in some special sulfur-rich Chinese crude oils by FT-ICR MS

Routine GC/MS analysis may apply to the volatilized Low-Molecular-Weight compounds in saturate and aromatic hydrocarbon fractions;thus,relative studies using this technique inevitably bring about some limitations on distribution of miscellaneous sulfur atom.In this article,Fourier Transform Ion Cyclotron Resonance Mass Spectrometry(FT-ICR MS)with high resolution is employed to investigate the distribution of organic sulfur compounds(OSCs)in the crude oil typically derived from the Eogene carbonate-evaporite sediments with further chemical compositional characterization in molecular level by miscellaneous atomic type,carbon number,and double bond equivalent(DBE).A variety of miscellaneous atomic types with S1,S2,S3,OS,OS2,O2S,O2S2,NS,and NOS etc.(S1 means those OSCs with one sulfur atom in a molecule)were identified in OSCs in these oil samples.High levels of alkyl thioether series compounds with one ring structure were presented mainly in the crude oil in the Jianghan Basin whereas high amounts of benzothiophene,dibenzothiophene etc.compounds with higher values in DBE and carbon number range occurred in the sulfur-rich heavy oil in the Jinxian Sag.Although carbonate-evaporite sediments deposited in the saline lacustrine facies in the Eogene basin both occurred in the Jinxian Sag and Jianghan Basin,obviously,they possess different chemical diagenetic pathway of sulfur under various microbial reactions,leading to diverse distributional characteristics on biomarkers,OSCs,and even different hydrocarbon generation mechanism of immature crude oil.

Efficient aerobic oxidative desulfurization via three-dimensional ordered macroporous tungsten-titanium oxides

A series of three-dimensional ordered macroporous(3 DOM)W-TiO_(2)catalysts have been prepared through a facile colloidal crystal template method.The prepared materials characterized in detail exhibited enhanced catalytic activity in aerobic oxidative desulfurization process.The experimental results indicated that the as-prepared materials possessed excellent 3 DOM structure,which is beneficial for the catalytic activity.The sample 3 DOM W-TiO_(2)-20 exhibited the highest activity in ODS process,and the sulfur removal can reach 98%in 6 h.Furthermore,the oxidative product was also analyzed in the reaction process.

Chemical, carbon and sulfur isotopic compositions constrain the origin of Upper Carboniferous-Lower Triassic gases in eastern Sichuan Basin, SW China

Methane dominated gas is one of the cleanest energy resources;however, there is no direct method to determine its source rock. Natural gases produced from the eastern Sichuan Basin together with seismic data were studied for their sources and secondary alteration by thermochemical sulfate reduction(TSR). Our results demonstrate that Upper Permian to Lower Triassic(P_(3)ch-T_(1)f) gases in the surrounding of the Kaijiang-Liangping area show volatile organic sulfur compounds(VOSCs) δ^(34)S values close to those of the associated H_(2)S, and may have been altered by methane-dominated TSR, resulting in positive shift in methane δ^(13)C_(1)values with increasing TSR extents. Other(or group 2) gases produced from the P_(3)ch-T_(1)f reservoirs from the southern area and the Upper Carboniferous to Middle Permian(C_(2)h-P_(2)q) from the eastern Sichuan Basin are not significantly changed by TSR, show similar δ^(34)S values between the kerogens and some VOSCs, and may have been derived from the Lower Silurian and Middle Permian source rocks. This study demonstrates a case for the first time showing the δ^(34)S values of VOSCs can be used as a tool for direct correlation between non-TSR altered gas and source rocks. Methane-dominated gas pools can be found using gas and source rock geochemistry combined with seismic data.

Efficient production of ethyl levulinate from cassava over Al2(SO4)3 catalyst in ethanol–water system

One-pot achievement of ethyl levulinate from cassava was conducted in ethanol–water system over several simple sulfate salt catalysts. Al2(SO4)3catalyst had the best performance in synthesizing ethyl levulinate comparing with those of a series of sulfate salts. The highest yields of ethyl levulinate was up to 39.27% as well as 7.78% levulinate acid when cassava was catalyzed in ethanol medium by adding 10 wt% water.13C and1H NMR spectroscopic investigations confirmed that isomerization of glucose to fructose over Al2(SO4)3catalyst is an important step in producing ethyl levulinate and levulinate acid. Due to aggregations of Al3+under hydrothermal conditions, tiny amount of Al3+were detected in filtrate at the percentage of 0.32% even if in absolute water. Brønsted and Lewis acids could improve the yield of ethyl levulinate and levulinate acid by synergistic effect. All results suggested that Al2(SO4)3was a simple and efficient catalyst for ethyl levulinate and levulinate acid production. © 2016 Science Press

Extraction of metals from complex sulfide nickel concentrates by low-temperature chlorination roasting and water leaching

The recovery of valuable metals from complex sulfide concentrates was investigated via chlorination roasting followed by water leaching. A reaction process is proposed on the basis of previous studies and the results of our preliminary experiments. During the process, various process parameters were studied, including the roasting temperature, the addition of NH4Cl, the roasting time, the leaching time, and the liquid-to-solid ratio. The roasted products and leach residues were characterized by X-ray diffraction and vibrational spectroscopy. Under the optimum condition, 95% of Ni, 98% of Cu, and 88% of Co were recovered. In addition, the removal of iron was studied in the water leaching stage. The results demonstrate that this process provides an effective approach for extracting multiple metals from complex concentrates or ores. © 2017, University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg.

Ionic Liquid Assisted Extraction of Nitrogen and Sulphur-Containing Air Pollutants from Model Oil and Regeneration of the Spent Ionic Liquid

Removal of air pollutants, such as nitrogen and sulphur containing compounds from a model oil (dodecane) was studied. An ionic liquid (1-ethyl-3-methylimidazolium chloride [C2mim] [Cl]) was used as an extractant. Liquid-liquid extraction by using 1-ethyl-3-methylimidazolium chloride [C2mim] [Cl] was found to be a very promising method for the removal of N- and S-compounds. This was evaluated by using a model oil (dodecane) with indole as a neutral nitrogen compound and pyridine as a basic nitrogen compound. Dibenzothiophene (DBT) was used as a sulphur compound. An extraction capacity of up to 90 wt% was achieved for the model oil containing pyridine, while only 76 wt% of indole in the oil was extracted. The extraction capacity of a model sulphur compound DBT was found to be up to 99 wt%. Regeneration of the spent ionic liquid was carried out with toluene back-extraction. A 1:1 toluene-to-IL wt ratio was performed at room temperature. It was observed that, for the spent ionic liquid containing DBT as a model compound more than 85 wt% (corresponding 3852 mg/kg) could be removed from the oil. After the second regeneration cycle, 86 wt% of the DBT was recovered from the ionic liquid to toluene. In the case of indole as the nitrogen containing species, more than 99 wt%, (corresponding to 2993 mg/kg) of the original indole was transferred from the model oil to the ionic liquid. After the first-regeneration cycle of the spent ionic liquid, 54 wt% of the indole–in-IL was transferred to toluene. Thus, both extractions of nitrogen and sulphur model compounds were successfully carried out from model oil and the back-extraction of these compounds from the ionic liquids to toluene demonstrated the proved the concept of the regeneration point of view.

Appropriate Location and Deployment Method for Successful Iron Fertilization

“High nutrient, low chlorophyll (HNLC)” regions were created by locking iron into sedimentary iron sulfides with hydrogen sulfide available from volcanic eruptions in surrounding oceans. Appropriate locations and deployment methods for the iron fertilization were far from volcanoes, earthquakes and boundaries of tectonic plates to reduce the chance of iron-locking by volcanic sulfur compounds. The appropriate locations for the large-scale iron fertilization are proposed as Shag Rocks in South Georgia and the Bransfield Strait in Drake Passage in the Southern Ocean due to their high momentum flux causing efficient iron deployment. The iron (Fe) replete compounds, consisting of natural clay, volcanic ash, agar, N2-fixing mucilaginous cyanobacteria, carbon black, biodegradable plastic foamed polylactic acid, fine wood chip, and iron-reducing marine bacterium, are deployed in the ocean to stay within a surface depth of 100 m for phytoplankton digestion. The deployment method of Fe-replete composite with a duration of at least several years for the successful iron fertilization, is configured to be on the streamline of the Antarctic Circumpolar Current (ACC). This will result in high momentum flux for its efficient dispersion on the ocean surface where diatom, copepods, krill and humpback whale stay together (~100 m). Humpback whales are proposed as a biomarker for the successful iron fertilization in large-scale since humpback whales feed on krill, which in turn feed on cockpods and diatoms. The successful large-scale iron fertilization may be indicated by the return of the humpback whales if they could not be found for a long period before the iron fertilization. On-line monitoring for the successful iron fertilization focuses on the simultaneous changes of the following two groups;the increase concentration group (chlorophyll, O2, Dissolved Oxygen (DO), Di Methyl Sulfide (DMS)) and the decrease concentration group (nitrate, phosphate, silicate, CO2, Dissolved CO2 (DCO2)). The monitoring of chlorophyll-a, nitrate phosphate, and silicate concentrations after deploying the Fe-replete complex is carried out throughout the day and night for the accurate measurement of algal blooms.

Synthesis, Biological Evaluation, and SAR Studies of Varyingly Substituted 4-Thioflavonols

A series of 4-thioflavonols compounds were synthesized by treating flavonols with lawsons reagent with variable substituent groups at A, B, and AB rings. All the synthesized compounds were checked for antibacterial and antifungal activity. We report that many compounds were found active against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Methicillin-resistant Staphylococcus aureus, bacterial strains and, C. albicans, C. parapsilosisstrains and C. krusei fungal strains. Most of the synthesized 4-thioflavonols compounds were found to show enhanced antimicrobial activity than respective flavonol compounds.

The role of the sulfur 3d orbitals in bond formation in sulfur-containing compounds

The role of the sulfur 3d orbitals in bond formation is discussed by taking into account the influence of the environment on the orbitals of the sulfur atom in the molecules. The ca cula- tion results of a series of prototype molecules containing sulfur such as SF_2, SF_4, NSF_3, SF_1, H_2S are reported. It is convincingly shown that in highly electronegative environment the energy levels of the sulfur 3d orbitals are reduced to the vicinity of those of the ligand valence orbitals and their spatial distributions are contracted to the bonding area, and therefore they can participate in bond formation to a certain extent, which is enhanced by the formation of the d-p π back bonds. It seems that the result reported in this paper is helpful for the solution of the long-standing debate about the sulfur 3d orbital participation in bond formation.

Marine Carbon-Sulfur Biogeochemical Cycles during the Steptoean Positive Carbon Isotope Excursion(SPICE) in the Jiangnan Basin, South China

Global occurrences of Steptoean Positive Carbon Isotope Excursion（SPICE） during Late Cambrian recorded a significant perturbation in marine carbon cycle, and might have had profound impacts on the biological evolution. In previous studies, SPICE has been reported from the Jiangnan slope belt in South China. To evaluate the bathymetric extent of SPICE, we investigate the limestone samples from the upper Qingxi Formation in the Shaijiang Section in the Jiangnan Basin. Our results show the positive excursions for both carbonate carbon（δ^（13）C） and organic carbon（δ^（13）C_（org）） isotopes, as well as the concurrent positive shifts in sulfur isotopes of carbonate associated sulfate（CAS, δ^（34）S_（CAS）） and pyrite（δ^（34）S_（pyrite））, unequivocally indicating the presence of SPICE in the Jiangnan Basin. A 4‰ increase in δ^（13）C_（carb） of the Qingxi limestone implies the increase of the relative flux of organic carbon burial by a factor of two. Concurrent positive excursions in δ^（34）S_（CAS） and δ^（34）S_（pyrite） have been attributed to the enhanced pyrite burial in oceans with extremely low concentration and spatially heterogeneous isotopic composition of seawater sulfate. Here, we propose that the seawater sulfur isotopic heterogeneity can be generated by volatile organic sulfur compound（VOSC, such as methanethiol and dimethyl sulfide） formation in sulfidic continental margins that were widespread during SPICE. Emission of 32S-enriched VOSC in atmosphere, followed by lateral transportation and aerobic oxidation in atmosphere, and precipitation in open oceans result in a net flux of ^（32）S from continental margins to open oceans, elevating δ^（34）S of seawater sulfate in continental margins. A simple box model indicates that about 35% to 75% of seawater sulfate in continental margins needs to be transported to open oceans via VOSC formation.

Effects of adding bulking agents on the biodrying of kitchen waste and the odor emissions produced

The effects of adding a bulking agent on the performance and odor emissions（ammonia and eight sulfur-containing odorous compounds） when biodrying kitchen waste were investigated. Three treatments were considered： the addition of either cornstalks（CS） or wood peat（WP） to kitchen waste as a bulking agent before biodrying, and a control treatment（CK）. The water-removal rates for CK, CS, and WP treatments were 0.35, 0.56, and0.43 kg/kg, respectively. Addition of bulking agents to kitchen waste produced less leachate,higher moisture-removal rates, and lower consumption of volatile solids. The CS treatment had the highest biodrying index（4.07）, and those for the WP and CK treatments were 3.67 and 1.97, respectively. Adding cornstalks or wood peat decreased NH3 emissions by 55.8%and 71.7%, respectively. Total sulfur losses were 3.6%–21.6% after 21 days biodrying, and H2 S and Me2 SS were the main（〉 95%） sulfur compounds released. The smallest amounts of sulfur-containing odorous compounds were emitted when cornstalks were added, and adding cornstalks and wood peat decreased total sulfur losses by 50.6%–64.8%.

Beyond hypoxia: Occurrence and characteristics of black blooms due to the decomposition of the submerged plant Potamogeton crispus in a shallow lake

Organic matter-induced black blooms （hypoxia and an offensive odor） are a serious ecosystem disasters that have occurred in some large eutrophic shallow lakes in China. In this study, we investigated two separate black blooms that were induced by Potamogeton crispus in Lake Taihu, China. The main physical and chemical characteristics, including color- and odor-related substances, of the black blooms were analyzed. The black blooms were characterized by low dissolved oxygen concentration （close to 0 mg/L）, low oxidation-reduction potential, and relatively low pH of overlying water. Notably higher Fe^2＋ and ∑S2- were found in the black-bloom waters than in waters not affected by black blooms. The black color of the water may be attributable to the high concentration of these elements, as black FeS was considered to be the main substance causing the black color of blooms in freshwater lakes. Volatile organic sulfur compounds, including dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, were very abundant in the black-bloom waters. The massive anoxic degradation of dead Potamogeton crispus plants released dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, which were the main odor-causing compounds in the black blooms. The black blooms also induced an increase in ammonium nitrogen and soluble reactive phosphorus levels in the overlying waters. This extreme phenomenon not only heavily influenced the original lake ecosystem but also greatly changed the cycling of Fe, S, and nutrients in the water column.

Spatial distribution of marine chemicals along a transect from Zhongshan Station to the Grove Mountain area, Eastern Antarctica

This study investigates the regional distribution of marine aerosol originated species （Na＋, CI-, nss-SO42- and MSA） in the snow pits （or firn cores） collected along a transect between Zhongshan Station and the Grove Mountain area （450 km inland） on the eastern side of the Lambert Glacier Basin. Concentrations of Na＋ and Cl- decrease exponentially with distance from the coast to 100 km inland （i.e., 1500 m a.s.1.）. Statistical results demonstrate that distance from the coast inland and elevation af-fect the concentration of sea-salt originated ions in inland areas significantly. Increase of Cl-/Na＋ ratio and higher variability in its standard deviation suggest that there are other sources of ions in addition to sea-salt in inland areas of the Antarctic conti- nent. The concentrations of Na＋ and Cl- from nine sampling sites in the Grove Mountain area are relatively higher than those from sites along CHINARE transect, although all sites are at similar distance inland. This phenomenon indicates that the barri- er effect of the mountain may be the most important factor influencing ion deposition. In addition, nss-SO42- and MSA vary differently, with nss-SO42- decreasing with distance more significantly. This implies that sources and transporting pathways influence the deposition of the two sulfur compounds considerably, being supported by the spatial pattern of correlation coeffi- cients between the nss-SO42- and MSA.