Novel centralized base station architectures integrating computation and communication functionalities have become important for the development of future mobile communication networks.Therefore,the development of dyn...Novel centralized base station architectures integrating computation and communication functionalities have become important for the development of future mobile communication networks.Therefore,the development of dynamic high-speed interconnections between baseband units(BBUs)and remote radio heads(RRHs)is vital in centralized base station design.Herein,dynamic high-speed switches(HSSs)connecting BBUs and RRHs were designed for a centralized base station architecture.We analyzed the characteristics of actual traffic and introduced a switch traffic model suitable for the super base station architecture.Then,we proposed a data-priority-aware(DPA)scheduling algorithm based on the traffic model.Lastly,we developed the dynamic HSS model based on the OPNET platform and the prototype based on FPGA.Our results show that the DPA achieves close to 100%throughput with lower latency and provides better run-time complexity than iOCF and HE-iSLIP,thereby demonstrating that the proposed switch system can be adopted in centralized base station architectures.展开更多
A novel forming method of nickel based super-alloy thin-walled part with variable diameter sections was proposed by using inner and outer pressure with the visco-elasto-plastic pressure-carrying medium at room tempera...A novel forming method of nickel based super-alloy thin-walled part with variable diameter sections was proposed by using inner and outer pressure with the visco-elasto-plastic pressure-carrying medium at room temperature,and the principle of the method was provided.Experiments and FE simulations were carried out to analyze the deformation characteristics for the part with larger variable diameter ratio(35%).The results show that visco-elasto-plastic pressure-carrying medium can meet the requirements of the room-temperature deformation condition for nickel based super-alloy sheet.The inner and outer pressure forming with the visco-elasto-plastic pressure-carrying medium can meet the requirements of dimensional accuracy for the thin-walled part with variable diameter sections.The thinning of wall-thickness is less than 4%.This method provides a new approach for near-net shape forming of nickel based super-alloy thin-walled parts with variable diameter sections.展开更多
Inconel 718 and Waspaloy, Nickel-based super-heat-resistant alloy, are high-strength, thermal-resistant and corrosion-resistant alloy that are widely used in parts of gas turbines and airplane engines. Due to their ex...Inconel 718 and Waspaloy, Nickel-based super-heat-resistant alloy, are high-strength, thermal-resistant and corrosion-resistant alloy that are widely used in parts of gas turbines and airplane engines. Due to their extremely tough and thermal-resistant nature, they are well known as materials that are difficult to cut. Shape holes on a disc of an aircraft engine, made of Ni-based super-heat-resistant alloy, are required with good surface integrity and geometric accuracy. This kind of shape hole is produced by EDM (Electro-discharge machining) currently. It is necessary to investigate an alternative machining process to reduce the process time and improve the surface quality. This paper presents an experimental study on the machining methods for the shape hole of Ni-base super-heat-resistant alloy Inconel 718 and Waspaloy. The feasibility using milling or/and grinding as an alternative for currently EDM process to machine shape holes is assessed by observing the wear and breakage of the cutting tools and grinder and analyzing the hole surface integrity and geometric accuracy. The results show that the milling process of Inconel 718 and Waspaloy can produce shape holes with acceptable surface roughness and geometric accuracy efficiently. The machined Waspaloy shape holes reveal a slight decrease tendency in section dimension from the top of the its bottom. There is a larger deviation from the nominal profile at the segment with smaller radius. A thin softened surface layer with thickness smaller than 60 μm occurs on the machined Waspaloy shape holes. The softening and work hardening become remarkable with the progress of tool wear.展开更多
本文利用卫星监测的数据构造夜间灯光复合指数表征城镇化水平,运用Superefficiency Ray Slacks-Based Measure(Super-RSBM)模型和Global Malmquist-Luenberger(GML)指数测算2000—2021年我国农业低碳全要素生产率(TFP),实证检验城镇化...本文利用卫星监测的数据构造夜间灯光复合指数表征城镇化水平,运用Superefficiency Ray Slacks-Based Measure(Super-RSBM)模型和Global Malmquist-Luenberger(GML)指数测算2000—2021年我国农业低碳全要素生产率(TFP),实证检验城镇化对我国农业低碳TFP的影响及其作用机制,并考察紧凑集约型和规模扩张型两种城镇化推进模式对农业低碳TFP的异质性影响。研究发现,从全国来看,城镇化推进与农业低碳TFP之间具有显著的U型关系,且邻近地区农业低碳TFP的提升对本地区产生示范效应;分区域来看,这种U型关系主要体现在农业适度发展区,而农业优化发展区的城镇化与农业低碳TFP之间呈现显著的正向线性关系,表明农业优化发展区应发挥“领头羊”作用,带动适度发展区早日跨越U型曲线的拐点,实现城镇化带动农业绿色发展;紧凑集约型的城镇化深度推进模式能够显著提升农业低碳TFP,而规模扩张型的城镇化广度推进模式降低了农业低碳TFP;农业低碳技术进步、农村劳动力转移、规模效应、农业产业链延伸和农村居民可支配收入增加是城镇化影响农业低碳TFP的主要途径。展开更多
电力系统运行在非理想状态时,容易产生短暂的电压波动,此时并联有源电力滤波器(shunt active power filter,SAPF)采用无源控制策略无法高效、精确地调节电能质量,而常规滑模控制又容易引起抖振。针对上述情况,将无源控制和抗干扰能力更...电力系统运行在非理想状态时,容易产生短暂的电压波动,此时并联有源电力滤波器(shunt active power filter,SAPF)采用无源控制策略无法高效、精确地调节电能质量,而常规滑模控制又容易引起抖振。针对上述情况,将无源控制和抗干扰能力更强的超螺旋二阶滑模控制相结合,提出了一种无源超螺旋二阶滑模控制策略。首先,根据有源电力滤波器的数学模型建立基于正负序分离的欧拉−拉格朗日模型;其次,对系统的模型进行了无源性分析,且根据其无源性设计了无源控制器,同时采用超螺旋二阶滑模控制对无源控制器进一步优化,提高了系统整体的鲁棒性和抗干扰能力;最后,在理想状态和负载突变、负载不平衡、电网电压不平衡、单相电压突变4种非理想状态下,通过仿真实验验证了无源超螺旋二阶滑模控制策略的有效性和优越性。展开更多
基金the key project of the National Science and Technology Major Project(Grant No.2018ZX03001017)the project of the CAS engineering laboratory for intelligent agricultural machinery equipment(Grant No.GC201907-02).
文摘Novel centralized base station architectures integrating computation and communication functionalities have become important for the development of future mobile communication networks.Therefore,the development of dynamic high-speed interconnections between baseband units(BBUs)and remote radio heads(RRHs)is vital in centralized base station design.Herein,dynamic high-speed switches(HSSs)connecting BBUs and RRHs were designed for a centralized base station architecture.We analyzed the characteristics of actual traffic and introduced a switch traffic model suitable for the super base station architecture.Then,we proposed a data-priority-aware(DPA)scheduling algorithm based on the traffic model.Lastly,we developed the dynamic HSS model based on the OPNET platform and the prototype based on FPGA.Our results show that the DPA achieves close to 100%throughput with lower latency and provides better run-time complexity than iOCF and HE-iSLIP,thereby demonstrating that the proposed switch system can be adopted in centralized base station architectures.
文摘A novel forming method of nickel based super-alloy thin-walled part with variable diameter sections was proposed by using inner and outer pressure with the visco-elasto-plastic pressure-carrying medium at room temperature,and the principle of the method was provided.Experiments and FE simulations were carried out to analyze the deformation characteristics for the part with larger variable diameter ratio(35%).The results show that visco-elasto-plastic pressure-carrying medium can meet the requirements of the room-temperature deformation condition for nickel based super-alloy sheet.The inner and outer pressure forming with the visco-elasto-plastic pressure-carrying medium can meet the requirements of dimensional accuracy for the thin-walled part with variable diameter sections.The thinning of wall-thickness is less than 4%.This method provides a new approach for near-net shape forming of nickel based super-alloy thin-walled parts with variable diameter sections.
文摘Inconel 718 and Waspaloy, Nickel-based super-heat-resistant alloy, are high-strength, thermal-resistant and corrosion-resistant alloy that are widely used in parts of gas turbines and airplane engines. Due to their extremely tough and thermal-resistant nature, they are well known as materials that are difficult to cut. Shape holes on a disc of an aircraft engine, made of Ni-based super-heat-resistant alloy, are required with good surface integrity and geometric accuracy. This kind of shape hole is produced by EDM (Electro-discharge machining) currently. It is necessary to investigate an alternative machining process to reduce the process time and improve the surface quality. This paper presents an experimental study on the machining methods for the shape hole of Ni-base super-heat-resistant alloy Inconel 718 and Waspaloy. The feasibility using milling or/and grinding as an alternative for currently EDM process to machine shape holes is assessed by observing the wear and breakage of the cutting tools and grinder and analyzing the hole surface integrity and geometric accuracy. The results show that the milling process of Inconel 718 and Waspaloy can produce shape holes with acceptable surface roughness and geometric accuracy efficiently. The machined Waspaloy shape holes reveal a slight decrease tendency in section dimension from the top of the its bottom. There is a larger deviation from the nominal profile at the segment with smaller radius. A thin softened surface layer with thickness smaller than 60 μm occurs on the machined Waspaloy shape holes. The softening and work hardening become remarkable with the progress of tool wear.
文摘本文利用卫星监测的数据构造夜间灯光复合指数表征城镇化水平,运用Superefficiency Ray Slacks-Based Measure(Super-RSBM)模型和Global Malmquist-Luenberger(GML)指数测算2000—2021年我国农业低碳全要素生产率(TFP),实证检验城镇化对我国农业低碳TFP的影响及其作用机制,并考察紧凑集约型和规模扩张型两种城镇化推进模式对农业低碳TFP的异质性影响。研究发现,从全国来看,城镇化推进与农业低碳TFP之间具有显著的U型关系,且邻近地区农业低碳TFP的提升对本地区产生示范效应;分区域来看,这种U型关系主要体现在农业适度发展区,而农业优化发展区的城镇化与农业低碳TFP之间呈现显著的正向线性关系,表明农业优化发展区应发挥“领头羊”作用,带动适度发展区早日跨越U型曲线的拐点,实现城镇化带动农业绿色发展;紧凑集约型的城镇化深度推进模式能够显著提升农业低碳TFP,而规模扩张型的城镇化广度推进模式降低了农业低碳TFP;农业低碳技术进步、农村劳动力转移、规模效应、农业产业链延伸和农村居民可支配收入增加是城镇化影响农业低碳TFP的主要途径。
文摘电力系统运行在非理想状态时,容易产生短暂的电压波动,此时并联有源电力滤波器(shunt active power filter,SAPF)采用无源控制策略无法高效、精确地调节电能质量,而常规滑模控制又容易引起抖振。针对上述情况,将无源控制和抗干扰能力更强的超螺旋二阶滑模控制相结合,提出了一种无源超螺旋二阶滑模控制策略。首先,根据有源电力滤波器的数学模型建立基于正负序分离的欧拉−拉格朗日模型;其次,对系统的模型进行了无源性分析,且根据其无源性设计了无源控制器,同时采用超螺旋二阶滑模控制对无源控制器进一步优化,提高了系统整体的鲁棒性和抗干扰能力;最后,在理想状态和负载突变、负载不平衡、电网电压不平衡、单相电压突变4种非理想状态下,通过仿真实验验证了无源超螺旋二阶滑模控制策略的有效性和优越性。
